[PATCH 0/3] PHY: ti-pipe3: Manage 3.3V PHY regulator

[PATCH 0/3] PHY: ti-pipe3: Manage 3.3V PHY regulator

[Roger Quadros]

Hi,

On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
powered down when the PHY is not in use. Add regulator
management code to control this power line.

cheers,
-roger
---

Roger Quadros (3):
  phy: omap-usb2: Manage PHY 3.3V supply regulator
  phy: omap-usb2: Add PHY regulator to DT binding documentation
  ARM: dts: dra7-evm: Add regulator information to USB2 PHYs

 Documentation/devicetree/bindings/phy/ti-phy.txt |  1 +
 arch/arm/boot/dts/dra7-evm.dts                   |  8 ++++++++
 drivers/phy/phy-omap-usb2.c                      | 25 ++++++++++++++++++++++++
 include/linux/phy/omap_usb.h                     |  1 +
 4 files changed, 35 insertions(+)

-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/3] phy: omap-usb2: Manage PHY 3.3V supply regulator

[Roger Quadros]

On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
powered down when the PHY is not in use. Add regulator
management code to control this power line.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 drivers/phy/phy-omap-usb2.c  | 25 +++++++++++++++++++++++++
 include/linux/phy/omap_usb.h |  1 +
 2 files changed, 26 insertions(+)

diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 7007c11..2afc79c 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -30,6 +30,7 @@
 #include <linux/phy/omap_control_phy.h>
 #include <linux/phy/phy.h>
 #include <linux/of_platform.h>
+#include <linux/regulator/consumer.h>
 
 #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
 #define USB2PHY_ANA_CONFIG1 0x4c
@@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
 
 	omap_control_phy_power(phy->control_dev, 0);
 
+	if (phy->pwr) {
+		int ret;
+
+		ret = regulator_disable(phy->pwr);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
 {
 	struct omap_usb *phy = phy_get_drvdata(x);
 
+	if (phy->pwr) {
+		int ret;
+
+		ret = regulator_enable(phy->pwr);
+		if (ret)
+			return ret;
+	}
+
 	omap_control_phy_power(phy->control_dev, 1);
 
 	return 0;
@@ -253,6 +270,14 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	phy->control_dev = &control_pdev->dev;
 	omap_control_phy_power(phy->control_dev, 0);
 
+	/* phy-supply */
+	phy->pwr = devm_regulator_get_optional(phy->dev, "phy");
+	if (IS_ERR(phy->pwr)) {
+		if (PTR_ERR(phy->pwr) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		phy->pwr = NULL;
+	}
+
 	otg->set_host		= omap_usb_set_host;
 	otg->set_peripheral	= omap_usb_set_peripheral;
 	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
index dc2c541..e2c46df 100644
--- a/include/linux/phy/omap_usb.h
+++ b/include/linux/phy/omap_usb.h
@@ -40,6 +40,7 @@ struct omap_usb {
 	struct clk		*wkupclk;
 	struct clk		*optclk;
 	u8			flags;
+	struct regulator	*pwr;
 };
 
 struct usb_phy_data {
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] phy: omap-usb2: Manage PHY 3.3V supply regulator

[Felipe Balbi]

[-- Attachment #1: Type: text/plain, Size: 2527 bytes --]

Hi,

On Mon, Jun 30, 2014 at 02:00:36PM +0300, Roger Quadros wrote:
> On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
> powered down when the PHY is not in use. Add regulator
> management code to control this power line.
> 
> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>

Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>

> ---
>  drivers/phy/phy-omap-usb2.c  | 25 +++++++++++++++++++++++++
>  include/linux/phy/omap_usb.h |  1 +
>  2 files changed, 26 insertions(+)
> 
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
> index 7007c11..2afc79c 100644
> --- a/drivers/phy/phy-omap-usb2.c
> +++ b/drivers/phy/phy-omap-usb2.c
> @@ -30,6 +30,7 @@
>  #include <linux/phy/omap_control_phy.h>
>  #include <linux/phy/phy.h>
>  #include <linux/of_platform.h>
> +#include <linux/regulator/consumer.h>
>  
>  #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>  #define USB2PHY_ANA_CONFIG1 0x4c
> @@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
>  
>  	omap_control_phy_power(phy->control_dev, 0);
>  
> +	if (phy->pwr) {
> +		int ret;
> +
> +		ret = regulator_disable(phy->pwr);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
>  {
>  	struct omap_usb *phy = phy_get_drvdata(x);
>  
> +	if (phy->pwr) {
> +		int ret;
> +
> +		ret = regulator_enable(phy->pwr);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	omap_control_phy_power(phy->control_dev, 1);
>  
>  	return 0;
> @@ -253,6 +270,14 @@ static int omap_usb2_probe(struct platform_device *pdev)
>  	phy->control_dev = &control_pdev->dev;
>  	omap_control_phy_power(phy->control_dev, 0);
>  
> +	/* phy-supply */
> +	phy->pwr = devm_regulator_get_optional(phy->dev, "phy");
> +	if (IS_ERR(phy->pwr)) {
> +		if (PTR_ERR(phy->pwr) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		phy->pwr = NULL;
> +	}
> +
>  	otg->set_host		= omap_usb_set_host;
>  	otg->set_peripheral	= omap_usb_set_peripheral;
>  	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
> index dc2c541..e2c46df 100644
> --- a/include/linux/phy/omap_usb.h
> +++ b/include/linux/phy/omap_usb.h
> @@ -40,6 +40,7 @@ struct omap_usb {
>  	struct clk		*wkupclk;
>  	struct clk		*optclk;
>  	u8			flags;
> +	struct regulator	*pwr;
>  };
>  
>  struct usb_phy_data {
> -- 
> 1.8.3.2
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 1/3] phy: omap-usb2: Manage PHY 3.3V supply regulator

[Kishon Vijay Abraham I]

Hi Roger,

On Monday 30 June 2014 04:30 PM, Roger Quadros wrote:
> On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
> powered down when the PHY is not in use. Add regulator
> management code to control this power line.
> 
> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
> ---
>  drivers/phy/phy-omap-usb2.c  | 25 +++++++++++++++++++++++++
>  include/linux/phy/omap_usb.h |  1 +
>  2 files changed, 26 insertions(+)
> 
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
> index 7007c11..2afc79c 100644
> --- a/drivers/phy/phy-omap-usb2.c
> +++ b/drivers/phy/phy-omap-usb2.c
> @@ -30,6 +30,7 @@
>  #include <linux/phy/omap_control_phy.h>
>  #include <linux/phy/phy.h>
>  #include <linux/of_platform.h>
> +#include <linux/regulator/consumer.h>
>  
>  #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>  #define USB2PHY_ANA_CONFIG1 0x4c
> @@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
>  
>  	omap_control_phy_power(phy->control_dev, 0);
>  
> +	if (phy->pwr) {
> +		int ret;
> +
> +		ret = regulator_disable(phy->pwr);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
>  {
>  	struct omap_usb *phy = phy_get_drvdata(x);
>  
> +	if (phy->pwr) {
> +		int ret;
> +
> +		ret = regulator_enable(phy->pwr);
> +		if (ret)
> +			return ret;
> +	}
> +

Shouldn't we do this in phy_power_on/phy_power_off in phy-core?

Cheers
Kishon

>  	omap_control_phy_power(phy->control_dev, 1);
>  
>  	return 0;
> @@ -253,6 +270,14 @@ static int omap_usb2_probe(struct platform_device *pdev)
>  	phy->control_dev = &control_pdev->dev;
>  	omap_control_phy_power(phy->control_dev, 0);
>  
> +	/* phy-supply */
> +	phy->pwr = devm_regulator_get_optional(phy->dev, "phy");
> +	if (IS_ERR(phy->pwr)) {
> +		if (PTR_ERR(phy->pwr) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +		phy->pwr = NULL;
> +	}
> +
>  	otg->set_host		= omap_usb_set_host;
>  	otg->set_peripheral	= omap_usb_set_peripheral;
>  	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
> index dc2c541..e2c46df 100644
> --- a/include/linux/phy/omap_usb.h
> +++ b/include/linux/phy/omap_usb.h
> @@ -40,6 +40,7 @@ struct omap_usb {
>  	struct clk		*wkupclk;
>  	struct clk		*optclk;
>  	u8			flags;
> +	struct regulator	*pwr;
>  };
>  
>  struct usb_phy_data {
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] phy: omap-usb2: Manage PHY 3.3V supply regulator

[Roger Quadros]

On 07/01/2014 12:56 PM, Kishon Vijay Abraham I wrote:
> Hi Roger,
> 
> On Monday 30 June 2014 04:30 PM, Roger Quadros wrote:
>> On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
>> powered down when the PHY is not in use. Add regulator
>> management code to control this power line.
>>
>> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
>> ---
>>  drivers/phy/phy-omap-usb2.c  | 25 +++++++++++++++++++++++++
>>  include/linux/phy/omap_usb.h |  1 +
>>  2 files changed, 26 insertions(+)
>>
>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>> index 7007c11..2afc79c 100644
>> --- a/drivers/phy/phy-omap-usb2.c
>> +++ b/drivers/phy/phy-omap-usb2.c
>> @@ -30,6 +30,7 @@
>>  #include <linux/phy/omap_control_phy.h>
>>  #include <linux/phy/phy.h>
>>  #include <linux/of_platform.h>
>> +#include <linux/regulator/consumer.h>
>>  
>>  #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>>  #define USB2PHY_ANA_CONFIG1 0x4c
>> @@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
>>  
>>  	omap_control_phy_power(phy->control_dev, 0);
>>  
>> +	if (phy->pwr) {
>> +		int ret;
>> +
>> +		ret = regulator_disable(phy->pwr);
>> +		if (ret)
>> +			return ret;
>> +	}
>> +
>>  	return 0;
>>  }
>>  
>> @@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
>>  {
>>  	struct omap_usb *phy = phy_get_drvdata(x);
>>  
>> +	if (phy->pwr) {
>> +		int ret;
>> +
>> +		ret = regulator_enable(phy->pwr);
>> +		if (ret)
>> +			return ret;
>> +	}
>> +
> 
> Shouldn't we do this in phy_power_on/phy_power_off in phy-core?

I thought about that earlier, but could not find a way to defer probing if the regulator is not-yet probed.
Any clues how it could be done in phy-core?

cheers,
-roger

> 
>>  	omap_control_phy_power(phy->control_dev, 1);
>>  
>>  	return 0;
>> @@ -253,6 +270,14 @@ static int omap_usb2_probe(struct platform_device *pdev)
>>  	phy->control_dev = &control_pdev->dev;
>>  	omap_control_phy_power(phy->control_dev, 0);
>>  
>> +	/* phy-supply */
>> +	phy->pwr = devm_regulator_get_optional(phy->dev, "phy");
>> +	if (IS_ERR(phy->pwr)) {
>> +		if (PTR_ERR(phy->pwr) == -EPROBE_DEFER)
>> +			return -EPROBE_DEFER;
>> +		phy->pwr = NULL;
>> +	}
>> +
>>  	otg->set_host		= omap_usb_set_host;
>>  	otg->set_peripheral	= omap_usb_set_peripheral;
>>  	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
>> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
>> index dc2c541..e2c46df 100644
>> --- a/include/linux/phy/omap_usb.h
>> +++ b/include/linux/phy/omap_usb.h
>> @@ -40,6 +40,7 @@ struct omap_usb {
>>  	struct clk		*wkupclk;
>>  	struct clk		*optclk;
>>  	u8			flags;
>> +	struct regulator	*pwr;
>>  };
>>  
>>  struct usb_phy_data {
>>

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] phy: omap-usb2: Manage PHY 3.3V supply regulator

[Kishon Vijay Abraham I]

Hi,

On Tuesday 01 July 2014 03:43 PM, Roger Quadros wrote:
> On 07/01/2014 12:56 PM, Kishon Vijay Abraham I wrote:
>> Hi Roger,
>>
>> On Monday 30 June 2014 04:30 PM, Roger Quadros wrote:
>>> On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
>>> powered down when the PHY is not in use. Add regulator
>>> management code to control this power line.
>>>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>> ---
>>>  drivers/phy/phy-omap-usb2.c  | 25 +++++++++++++++++++++++++
>>>  include/linux/phy/omap_usb.h |  1 +
>>>  2 files changed, 26 insertions(+)
>>>
>>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>>> index 7007c11..2afc79c 100644
>>> --- a/drivers/phy/phy-omap-usb2.c
>>> +++ b/drivers/phy/phy-omap-usb2.c
>>> @@ -30,6 +30,7 @@
>>>  #include <linux/phy/omap_control_phy.h>
>>>  #include <linux/phy/phy.h>
>>>  #include <linux/of_platform.h>
>>> +#include <linux/regulator/consumer.h>
>>>  
>>>  #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>>>  #define USB2PHY_ANA_CONFIG1 0x4c
>>> @@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
>>>  
>>>  	omap_control_phy_power(phy->control_dev, 0);
>>>  
>>> +	if (phy->pwr) {
>>> +		int ret;
>>> +
>>> +		ret = regulator_disable(phy->pwr);
>>> +		if (ret)
>>> +			return ret;
>>> +	}
>>> +
>>>  	return 0;
>>>  }
>>>  
>>> @@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
>>>  {
>>>  	struct omap_usb *phy = phy_get_drvdata(x);
>>>  
>>> +	if (phy->pwr) {
>>> +		int ret;
>>> +
>>> +		ret = regulator_enable(phy->pwr);
>>> +		if (ret)
>>> +			return ret;
>>> +	}
>>> +
>>
>> Shouldn't we do this in phy_power_on/phy_power_off in phy-core?
> 
> I thought about that earlier, but could not find a way to defer probing if the regulator is not-yet probed.
> Any clues how it could be done in phy-core?

We can try to do regulator_get in phy_create and return EPROBE_DEFER if the
regulator_get returns EPROBE_DEFER no?

Cheers
Kishon

Re: [PATCH 1/3] phy: omap-usb2: Manage PHY 3.3V supply regulator

[Roger Quadros]

On 07/01/2014 01:20 PM, Kishon Vijay Abraham I wrote:
> Hi,
> 
> On Tuesday 01 July 2014 03:43 PM, Roger Quadros wrote:
>> On 07/01/2014 12:56 PM, Kishon Vijay Abraham I wrote:
>>> Hi Roger,
>>>
>>> On Monday 30 June 2014 04:30 PM, Roger Quadros wrote:
>>>> On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
>>>> powered down when the PHY is not in use. Add regulator
>>>> management code to control this power line.
>>>>
>>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>>> ---
>>>>  drivers/phy/phy-omap-usb2.c  | 25 +++++++++++++++++++++++++
>>>>  include/linux/phy/omap_usb.h |  1 +
>>>>  2 files changed, 26 insertions(+)
>>>>
>>>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>>>> index 7007c11..2afc79c 100644
>>>> --- a/drivers/phy/phy-omap-usb2.c
>>>> +++ b/drivers/phy/phy-omap-usb2.c
>>>> @@ -30,6 +30,7 @@
>>>>  #include <linux/phy/omap_control_phy.h>
>>>>  #include <linux/phy/phy.h>
>>>>  #include <linux/of_platform.h>
>>>> +#include <linux/regulator/consumer.h>
>>>>  
>>>>  #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>>>>  #define USB2PHY_ANA_CONFIG1 0x4c
>>>> @@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
>>>>  
>>>>  	omap_control_phy_power(phy->control_dev, 0);
>>>>  
>>>> +	if (phy->pwr) {
>>>> +		int ret;
>>>> +
>>>> +		ret = regulator_disable(phy->pwr);
>>>> +		if (ret)
>>>> +			return ret;
>>>> +	}
>>>> +
>>>>  	return 0;
>>>>  }
>>>>  
>>>> @@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
>>>>  {
>>>>  	struct omap_usb *phy = phy_get_drvdata(x);
>>>>  
>>>> +	if (phy->pwr) {
>>>> +		int ret;
>>>> +
>>>> +		ret = regulator_enable(phy->pwr);
>>>> +		if (ret)
>>>> +			return ret;
>>>> +	}
>>>> +
>>>
>>> Shouldn't we do this in phy_power_on/phy_power_off in phy-core?
>>
>> I thought about that earlier, but could not find a way to defer probing if the regulator is not-yet probed.
>> Any clues how it could be done in phy-core?
> 
> We can try to do regulator_get in phy_create and return EPROBE_DEFER if the
> regulator_get returns EPROBE_DEFER no?

Yes indeed, we can. I missed the phy_create() and was only looking at phy_init() and phy_power_*() :P.
I'll post a v2 soon.

cheers,
-roger

Re: [PATCH 1/3] phy: omap-usb2: Manage PHY 3.3V supply regulator

[Kishon Vijay Abraham I]

On Tuesday 01 July 2014 03:55 PM, Roger Quadros wrote:
> On 07/01/2014 01:20 PM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Tuesday 01 July 2014 03:43 PM, Roger Quadros wrote:
>>> On 07/01/2014 12:56 PM, Kishon Vijay Abraham I wrote:
>>>> Hi Roger,
>>>>
>>>> On Monday 30 June 2014 04:30 PM, Roger Quadros wrote:
>>>>> On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
>>>>> powered down when the PHY is not in use. Add regulator
>>>>> management code to control this power line.
>>>>>
>>>>> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
>>>>> ---
>>>>>  drivers/phy/phy-omap-usb2.c  | 25 +++++++++++++++++++++++++
>>>>>  include/linux/phy/omap_usb.h |  1 +
>>>>>  2 files changed, 26 insertions(+)
>>>>>
>>>>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>>>>> index 7007c11..2afc79c 100644
>>>>> --- a/drivers/phy/phy-omap-usb2.c
>>>>> +++ b/drivers/phy/phy-omap-usb2.c
>>>>> @@ -30,6 +30,7 @@
>>>>>  #include <linux/phy/omap_control_phy.h>
>>>>>  #include <linux/phy/phy.h>
>>>>>  #include <linux/of_platform.h>
>>>>> +#include <linux/regulator/consumer.h>
>>>>>  
>>>>>  #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>>>>>  #define USB2PHY_ANA_CONFIG1 0x4c
>>>>> @@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
>>>>>  
>>>>>  	omap_control_phy_power(phy->control_dev, 0);
>>>>>  
>>>>> +	if (phy->pwr) {
>>>>> +		int ret;
>>>>> +
>>>>> +		ret = regulator_disable(phy->pwr);
>>>>> +		if (ret)
>>>>> +			return ret;
>>>>> +	}
>>>>> +
>>>>>  	return 0;
>>>>>  }
>>>>>  
>>>>> @@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
>>>>>  {
>>>>>  	struct omap_usb *phy = phy_get_drvdata(x);
>>>>>  
>>>>> +	if (phy->pwr) {
>>>>> +		int ret;
>>>>> +
>>>>> +		ret = regulator_enable(phy->pwr);
>>>>> +		if (ret)
>>>>> +			return ret;
>>>>> +	}
>>>>> +
>>>>
>>>> Shouldn't we do this in phy_power_on/phy_power_off in phy-core?
>>>
>>> I thought about that earlier, but could not find a way to defer probing if the regulator is not-yet probed.
>>> Any clues how it could be done in phy-core?
>>
>> We can try to do regulator_get in phy_create and return EPROBE_DEFER if the
>> regulator_get returns EPROBE_DEFER no?
> 
> Yes indeed, we can. I missed the phy_create() and was only looking at phy_init() and phy_power_*() :P.
> I'll post a v2 soon.

cool. Thanks :-)

-Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] phy: omap-usb2: Add PHY regulator to DT binding documentation

[Roger Quadros]

The PHY driver can manage a regulator that supplies power to
the USB2 PHY. Add DT binding information for that.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
 Documentation/devicetree/bindings/phy/ti-phy.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 9ce458f..a6acd99 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -41,6 +41,7 @@ Required properties:
 Optional properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
    the PHY.
+ - phy-supply: phandle of the regulator that supplies power to the PHY.
 
 This is usually a subnode of ocp2scp to which it is connected.
 
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 3/3] ARM: dts: dra7-evm: Add regulator information to USB2 PHYs

[Roger Quadros]

The ldousb_reg regulator provides power to the USB1 and USB2
High Speed PHYs.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/dra7-evm.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 4adc280..fd96ced 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -495,3 +495,11 @@
 		};
 	};
 };
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
-- 
1.8.3.2

Re: [PATCH 3/3] ARM: dts: dra7-evm: Add regulator information to USB2 PHYs

[Tony Lindgren]

* Roger Quadros <rogerq@ti.com> [140630 04:02]:
> The ldousb_reg regulator provides power to the USB1 and USB2
> High Speed PHYs.

Applying this one into omap-for-v3.17/dt thanks.

Tony