* [PATCH 0/3] kbuild: Clean up makefiles and then drop obj-n an obj-n
@ 2014-09-09 10:26 Masahiro Yamada
2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada
0 siblings, 1 reply; 5+ messages in thread
From: Masahiro Yamada @ 2014-09-09 10:26 UTC (permalink / raw)
To: linux-kbuild
Cc: Ben Dooks, Tony Lindgren, Linus Walleij, Nicolas Ferre,
Takashi Yoshii, Wolfram Sang, Greg Ungerer, Kukjin Kim,
Sam Ravnborg, Laurent Pinchart, Mike Turquette,
Geert Uytterhoeven, Russell King,
Jean-Christophe Plagniol-Villard, linux-samsung-soc, Ulrich Hecht,
Simon Horman, linux-omap, Andrew Victor, linux-arm-kernel,
Michal Marek, Ryan Mallon, netdev
Masahiro Yamada (3):
kbuild: remove unnecessary "obj- := dummy.o" trick
kbuild: remove unnecessary variable initializaions
kbuild: remove obj-n and lib-n handling
arch/arm/mach-at91/Makefile | 3 ---
arch/arm/mach-ebsa110/Makefile | 3 ---
arch/arm/mach-ep93xx/Makefile | 3 ---
arch/arm/mach-exynos/Makefile | 5 -----
arch/arm/mach-footbridge/Makefile | 3 ---
arch/arm/mach-iop13xx/Makefile | 5 -----
arch/arm/mach-iop32x/Makefile | 3 ---
arch/arm/mach-iop33x/Makefile | 3 ---
arch/arm/mach-ks8695/Makefile | 3 ---
arch/arm/mach-rpc/Makefile | 4 ----
arch/arm/mach-s3c24xx/Makefile | 5 -----
arch/arm/mach-s3c64xx/Makefile | 5 -----
arch/arm/mach-s5pv210/Makefile | 5 -----
arch/arm/mach-sa1100/Makefile | 3 ---
arch/arm/mach-u300/Makefile | 3 ---
arch/arm/plat-iop/Makefile | 6 ------
arch/arm/plat-omap/Makefile | 3 ---
arch/arm/plat-samsung/Makefile | 5 -----
drivers/clk/shmobile/Makefile | 2 --
drivers/net/wimax/Makefile | 4 ----
firmware/Makefile | 2 +-
scripts/Makefile.build | 4 ++--
scripts/Makefile.clean | 4 +---
scripts/Makefile.fwinst | 2 +-
24 files changed, 5 insertions(+), 83 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 2/3] kbuild: remove unnecessary variable initializaions
2014-09-09 10:26 [PATCH 0/3] kbuild: Clean up makefiles and then drop obj-n an obj-n Masahiro Yamada
@ 2014-09-09 10:26 ` Masahiro Yamada
2014-09-09 11:52 ` Nicolas Ferre
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Masahiro Yamada @ 2014-09-09 10:26 UTC (permalink / raw)
To: linux-kbuild
Cc: Kukjin Kim, Russell King, Ryan Mallon, Tony Lindgren,
Linus Walleij, Nicolas Ferre, linux-kernel, Masahiro Yamada,
Hartley Sweeten, linux-samsung-soc, Ben Dooks, Greg Ungerer,
linux-omap, Jean-Christophe Plagniol-Villard, Andrew Victor,
linux-arm-kernel
Clearing obj-y, obj-m, obj-n, obj- in each Makefile is
a useless habit.
They are non-exported variables; therefore they are always empty
whenever descending into each subdirectory.
(Moreorver, obj-y and obj-m are also set to empty at the beginning
of scripts/Makefile.build)
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
---
arch/arm/mach-at91/Makefile | 3 ---
arch/arm/mach-ebsa110/Makefile | 3 ---
arch/arm/mach-ep93xx/Makefile | 3 ---
arch/arm/mach-exynos/Makefile | 5 -----
| 3 ---
arch/arm/mach-iop13xx/Makefile | 5 -----
arch/arm/mach-iop32x/Makefile | 3 ---
arch/arm/mach-iop33x/Makefile | 3 ---
arch/arm/mach-ks8695/Makefile | 3 ---
arch/arm/mach-rpc/Makefile | 4 ----
arch/arm/mach-s3c24xx/Makefile | 5 -----
arch/arm/mach-s3c64xx/Makefile | 5 -----
arch/arm/mach-s5pv210/Makefile | 5 -----
arch/arm/mach-sa1100/Makefile | 3 ---
arch/arm/mach-u300/Makefile | 3 ---
arch/arm/plat-iop/Makefile | 6 ------
arch/arm/plat-omap/Makefile | 3 ---
arch/arm/plat-samsung/Makefile | 4 ----
18 files changed, 69 deletions(-)
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 78e9cec..75033839 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -3,9 +3,6 @@
#
obj-y := irq.o gpio.o setup.o sysirq_mask.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_OLD_CLK_AT91) += clock.o
obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
index 935e4af..a7d68c1 100644
--- a/arch/arm/mach-ebsa110/Makefile
+++ b/arch/arm/mach-ebsa110/Makefile
@@ -5,6 +5,3 @@
# Object file lists.
obj-y := core.o io.o leds.o
-obj-m :=
-obj-n :=
-obj- :=
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 0dc51f9..78d427b 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -2,9 +2,6 @@
# Makefile for the linux kernel.
#
obj-y := core.o clock.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_EP93XX_DMA) += dma.o
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 788f26d..27ae614 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -7,11 +7,6 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
# Core
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
--git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index c3faa3b..e83d5c8 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -5,9 +5,6 @@
# Object file lists.
obj-y := common.o dma.o isa-irq.o
-obj-m :=
-obj-n :=
-obj- :=
pci-y += dc21285.o
pci-$(CONFIG_ARCH_CATS) += cats-pci.o
diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
index cad015f..a3d9260 100644
--- a/arch/arm/mach-iop13xx/Makefile
+++ b/arch/arm/mach-iop13xx/Makefile
@@ -1,8 +1,3 @@
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
obj-$(CONFIG_ARCH_IOP13XX) += setup.o
obj-$(CONFIG_ARCH_IOP13XX) += irq.o
obj-$(CONFIG_ARCH_IOP13XX) += pci.o
diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
index cfdf8a1..2d4010a 100644
--- a/arch/arm/mach-iop32x/Makefile
+++ b/arch/arm/mach-iop32x/Makefile
@@ -3,9 +3,6 @@
#
obj-y := irq.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_MACH_GLANTANK) += glantank.o
obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile
index 90081d8..e95db30 100644
--- a/arch/arm/mach-iop33x/Makefile
+++ b/arch/arm/mach-iop33x/Makefile
@@ -3,9 +3,6 @@
#
obj-y := irq.o uart.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
obj-$(CONFIG_MACH_IQ80332) += iq80332.o
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index e370caf..8ecb797 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -4,9 +4,6 @@
#
obj-y := cpu.o irq.o time.o devices.o
-obj-m :=
-obj-n :=
-obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index 992e28b..2ebc687 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -5,7 +5,3 @@
# Object file lists.
obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o
-obj-m :=
-obj-n :=
-obj- :=
-
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 2235d0d..b920716 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -7,11 +7,6 @@
#
# Licensed under GPLv2
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
# core
obj-y += common.o
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 58069a7..12f67b6 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -5,11 +5,6 @@
#
# Licensed under GPLv2
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
# Core
obj-y += common.o
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 7dc2d0e..72b9e96 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -7,11 +7,6 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
# Core
obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 2732eef..f1114d1 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -4,9 +4,6 @@
# Common support
obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
-obj-m :=
-obj-n :=
-obj- :=
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 3ec74ac..87d37de 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -3,9 +3,6 @@
#
obj-y := core.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 224e56c..f2af203 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -2,8 +2,6 @@
# Makefile for the linux kernel.
#
-obj-y :=
-
# IOP32X
obj-$(CONFIG_ARCH_IOP32X) += i2c.o
obj-$(CONFIG_ARCH_IOP32X) += pci.o
@@ -27,7 +25,3 @@ obj-$(CONFIG_ARCH_IOP33X) += restart.o
# IOP13XX
obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
obj-$(CONFIG_ARCH_IOP13XX) += time.o
-
-obj-m :=
-obj-n :=
-obj- :=
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 0b01b68..97a50e8 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -6,9 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include
# Common support
obj-y := sram.o dma.o counter_32k.o
-obj-m :=
-obj-n :=
-obj- :=
# omap_device support (OMAP2+ only at the moment)
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index a402262..f0a0084 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -6,10 +6,6 @@
ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
-obj-y :=
-obj-m :=
-obj- :=
-
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] kbuild: remove unnecessary variable initializaions
2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada
@ 2014-09-09 11:52 ` Nicolas Ferre
2014-09-09 16:23 ` Peter Foley
2014-09-23 14:56 ` Linus Walleij
2 siblings, 0 replies; 5+ messages in thread
From: Nicolas Ferre @ 2014-09-09 11:52 UTC (permalink / raw)
To: Masahiro Yamada, linux-kbuild
Cc: Kukjin Kim, Russell King, Ryan Mallon, Tony Lindgren,
Linus Walleij, linux-kernel, Hartley Sweeten, linux-samsung-soc,
Ben Dooks, Greg Ungerer, linux-omap,
Jean-Christophe Plagniol-Villard, Andrew Victor, linux-arm-kernel
On 09/09/2014 12:26, Masahiro Yamada :
> Clearing obj-y, obj-m, obj-n, obj- in each Makefile is
> a useless habit.
>
> They are non-exported variables; therefore they are always empty
> whenever descending into each subdirectory.
> (Moreorver, obj-y and obj-m are also set to empty at the beginning
> of scripts/Makefile.build)
>
> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
> ---
>
> arch/arm/mach-at91/Makefile | 3 ---
> arch/arm/mach-ebsa110/Makefile | 3 ---
> arch/arm/mach-ep93xx/Makefile | 3 ---
> arch/arm/mach-exynos/Makefile | 5 -----
> arch/arm/mach-footbridge/Makefile | 3 ---
> arch/arm/mach-iop13xx/Makefile | 5 -----
> arch/arm/mach-iop32x/Makefile | 3 ---
> arch/arm/mach-iop33x/Makefile | 3 ---
> arch/arm/mach-ks8695/Makefile | 3 ---
> arch/arm/mach-rpc/Makefile | 4 ----
> arch/arm/mach-s3c24xx/Makefile | 5 -----
> arch/arm/mach-s3c64xx/Makefile | 5 -----
> arch/arm/mach-s5pv210/Makefile | 5 -----
> arch/arm/mach-sa1100/Makefile | 3 ---
> arch/arm/mach-u300/Makefile | 3 ---
> arch/arm/plat-iop/Makefile | 6 ------
> arch/arm/plat-omap/Makefile | 3 ---
> arch/arm/plat-samsung/Makefile | 4 ----
> 18 files changed, 69 deletions(-)
>
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 78e9cec..75033839 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -3,9 +3,6 @@
> #
>
> obj-y := irq.o gpio.o setup.o sysirq_mask.o
> -obj-m :=
> -obj-n :=
> -obj- :=
I agree:
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
But I have patches that will mess with these changes already queued for
3.18. You may have to signal these conflicts when carrying the patch
upstream.
Thanks, best regards,
> obj-$(CONFIG_OLD_CLK_AT91) += clock.o
> obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
> diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile
> index 935e4af..a7d68c1 100644
> --- a/arch/arm/mach-ebsa110/Makefile
> +++ b/arch/arm/mach-ebsa110/Makefile
> @@ -5,6 +5,3 @@
> # Object file lists.
>
> obj-y := core.o io.o leds.o
> -obj-m :=
> -obj-n :=
> -obj- :=
> diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
> index 0dc51f9..78d427b 100644
> --- a/arch/arm/mach-ep93xx/Makefile
> +++ b/arch/arm/mach-ep93xx/Makefile
> @@ -2,9 +2,6 @@
> # Makefile for the linux kernel.
> #
> obj-y := core.o clock.o
> -obj-m :=
> -obj-n :=
> -obj- :=
>
> obj-$(CONFIG_EP93XX_DMA) += dma.o
>
> diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
> index 788f26d..27ae614 100644
> --- a/arch/arm/mach-exynos/Makefile
> +++ b/arch/arm/mach-exynos/Makefile
> @@ -7,11 +7,6 @@
>
> ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
>
> -obj-y :=
> -obj-m :=
> -obj-n :=
> -obj- :=
> -
> # Core
>
> obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
> diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
> index c3faa3b..e83d5c8 100644
> --- a/arch/arm/mach-footbridge/Makefile
> +++ b/arch/arm/mach-footbridge/Makefile
> @@ -5,9 +5,6 @@
> # Object file lists.
>
> obj-y := common.o dma.o isa-irq.o
> -obj-m :=
> -obj-n :=
> -obj- :=
>
> pci-y += dc21285.o
> pci-$(CONFIG_ARCH_CATS) += cats-pci.o
> diff --git a/arch/arm/mach-iop13xx/Makefile b/arch/arm/mach-iop13xx/Makefile
> index cad015f..a3d9260 100644
> --- a/arch/arm/mach-iop13xx/Makefile
> +++ b/arch/arm/mach-iop13xx/Makefile
> @@ -1,8 +1,3 @@
> -obj-y :=
> -obj-m :=
> -obj-n :=
> -obj- :=
> -
> obj-$(CONFIG_ARCH_IOP13XX) += setup.o
> obj-$(CONFIG_ARCH_IOP13XX) += irq.o
> obj-$(CONFIG_ARCH_IOP13XX) += pci.o
> diff --git a/arch/arm/mach-iop32x/Makefile b/arch/arm/mach-iop32x/Makefile
> index cfdf8a1..2d4010a 100644
> --- a/arch/arm/mach-iop32x/Makefile
> +++ b/arch/arm/mach-iop32x/Makefile
> @@ -3,9 +3,6 @@
> #
>
> obj-y := irq.o
> -obj-m :=
> -obj-n :=
> -obj- :=
>
> obj-$(CONFIG_MACH_GLANTANK) += glantank.o
> obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
> diff --git a/arch/arm/mach-iop33x/Makefile b/arch/arm/mach-iop33x/Makefile
> index 90081d8..e95db30 100644
> --- a/arch/arm/mach-iop33x/Makefile
> +++ b/arch/arm/mach-iop33x/Makefile
> @@ -3,9 +3,6 @@
> #
>
> obj-y := irq.o uart.o
> -obj-m :=
> -obj-n :=
> -obj- :=
>
> obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
> obj-$(CONFIG_MACH_IQ80332) += iq80332.o
> diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
> index e370caf..8ecb797 100644
> --- a/arch/arm/mach-ks8695/Makefile
> +++ b/arch/arm/mach-ks8695/Makefile
> @@ -4,9 +4,6 @@
> #
>
> obj-y := cpu.o irq.o time.o devices.o
> -obj-m :=
> -obj-n :=
> -obj- :=
>
> # PCI support is optional
> obj-$(CONFIG_PCI) += pci.o
> diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
> index 992e28b..2ebc687 100644
> --- a/arch/arm/mach-rpc/Makefile
> +++ b/arch/arm/mach-rpc/Makefile
> @@ -5,7 +5,3 @@
> # Object file lists.
>
> obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o
> -obj-m :=
> -obj-n :=
> -obj- :=
> -
> diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
> index 2235d0d..b920716 100644
> --- a/arch/arm/mach-s3c24xx/Makefile
> +++ b/arch/arm/mach-s3c24xx/Makefile
> @@ -7,11 +7,6 @@
> #
> # Licensed under GPLv2
>
> -obj-y :=
> -obj-m :=
> -obj-n :=
> -obj- :=
> -
> # core
>
> obj-y += common.o
> diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
> index 58069a7..12f67b6 100644
> --- a/arch/arm/mach-s3c64xx/Makefile
> +++ b/arch/arm/mach-s3c64xx/Makefile
> @@ -5,11 +5,6 @@
> #
> # Licensed under GPLv2
>
> -obj-y :=
> -obj-m :=
> -obj-n :=
> -obj- :=
> -
> # Core
>
> obj-y += common.o
> diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
> index 7dc2d0e..72b9e96 100644
> --- a/arch/arm/mach-s5pv210/Makefile
> +++ b/arch/arm/mach-s5pv210/Makefile
> @@ -7,11 +7,6 @@
>
> ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
>
> -obj-y :=
> -obj-m :=
> -obj-n :=
> -obj- :=
> -
> # Core
>
> obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
> diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
> index 2732eef..f1114d1 100644
> --- a/arch/arm/mach-sa1100/Makefile
> +++ b/arch/arm/mach-sa1100/Makefile
> @@ -4,9 +4,6 @@
>
> # Common support
> obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
> -obj-m :=
> -obj-n :=
> -obj- :=
>
> # Specific board support
> obj-$(CONFIG_SA1100_ASSABET) += assabet.o
> diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
> index 3ec74ac..87d37de 100644
> --- a/arch/arm/mach-u300/Makefile
> +++ b/arch/arm/mach-u300/Makefile
> @@ -3,9 +3,6 @@
> #
>
> obj-y := core.o
> -obj-m :=
> -obj-n :=
> -obj- :=
>
> obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
> obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
> diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
> index 224e56c..f2af203 100644
> --- a/arch/arm/plat-iop/Makefile
> +++ b/arch/arm/plat-iop/Makefile
> @@ -2,8 +2,6 @@
> # Makefile for the linux kernel.
> #
>
> -obj-y :=
> -
> # IOP32X
> obj-$(CONFIG_ARCH_IOP32X) += i2c.o
> obj-$(CONFIG_ARCH_IOP32X) += pci.o
> @@ -27,7 +25,3 @@ obj-$(CONFIG_ARCH_IOP33X) += restart.o
> # IOP13XX
> obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
> obj-$(CONFIG_ARCH_IOP13XX) += time.o
> -
> -obj-m :=
> -obj-n :=
> -obj- :=
> diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
> index 0b01b68..97a50e8 100644
> --- a/arch/arm/plat-omap/Makefile
> +++ b/arch/arm/plat-omap/Makefile
> @@ -6,9 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include
>
> # Common support
> obj-y := sram.o dma.o counter_32k.o
> -obj-m :=
> -obj-n :=
> -obj- :=
>
> # omap_device support (OMAP2+ only at the moment)
>
> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
> index a402262..f0a0084 100644
> --- a/arch/arm/plat-samsung/Makefile
> +++ b/arch/arm/plat-samsung/Makefile
> @@ -6,10 +6,6 @@
>
> ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
>
> -obj-y :=
> -obj-m :=
> -obj- :=
> -
> # Objects we always build independent of SoC choice
>
> obj-y += init.o cpu.o
>
--
Nicolas Ferre
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] kbuild: remove unnecessary variable initializaions
2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada
2014-09-09 11:52 ` Nicolas Ferre
@ 2014-09-09 16:23 ` Peter Foley
2014-09-23 14:56 ` Linus Walleij
2 siblings, 0 replies; 5+ messages in thread
From: Peter Foley @ 2014-09-09 16:23 UTC (permalink / raw)
To: Masahiro Yamada
Cc: linux-kbuild, Andrew Victor, Nicolas Ferre,
Jean-Christophe Plagniol-Villard, Russell King, Hartley Sweeten,
Ryan Mallon, Kukjin Kim, Greg Ungerer, Ben Dooks, Linus Walleij,
Tony Lindgren, linux-arm-kernel, LKML, linux-samsung-soc,
linux-omap
On Tue, Sep 9, 2014 at 6:26 AM, Masahiro Yamada
<yamada.m@jp.panasonic.com> wrote:
> Clearing obj-y, obj-m, obj-n, obj- in each Makefile is
> a useless habit.
>
> They are non-exported variables; therefore they are always empty
> whenever descending into each subdirectory.
> (Moreorver, obj-y and obj-m are also set to empty at the beginning
> of scripts/Makefile.build)
>
> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] kbuild: remove unnecessary variable initializaions
2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada
2014-09-09 11:52 ` Nicolas Ferre
2014-09-09 16:23 ` Peter Foley
@ 2014-09-23 14:56 ` Linus Walleij
2 siblings, 0 replies; 5+ messages in thread
From: Linus Walleij @ 2014-09-23 14:56 UTC (permalink / raw)
To: Masahiro Yamada
Cc: linux-kbuild, Andrew Victor, Nicolas Ferre,
Jean-Christophe Plagniol-Villard, Russell King, Hartley Sweeten,
Ryan Mallon, Kukjin Kim, Greg Ungerer, Ben Dooks, Tony Lindgren,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-samsung-soc, Linux-OMAP
On Tue, Sep 9, 2014 at 12:26 PM, Masahiro Yamada
<yamada.m@jp.panasonic.com> wrote:
> Clearing obj-y, obj-m, obj-n, obj- in each Makefile is
> a useless habit.
>
> They are non-exported variables; therefore they are always empty
> whenever descending into each subdirectory.
> (Moreorver, obj-y and obj-m are also set to empty at the beginning
> of scripts/Makefile.build)
>
> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-09-23 14:56 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-09-09 10:26 [PATCH 0/3] kbuild: Clean up makefiles and then drop obj-n an obj-n Masahiro Yamada
2014-09-09 10:26 ` [PATCH 2/3] kbuild: remove unnecessary variable initializaions Masahiro Yamada
2014-09-09 11:52 ` Nicolas Ferre
2014-09-09 16:23 ` Peter Foley
2014-09-23 14:56 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox