[parisc-linux] pa-risc project

[parisc-linux] pa-risc project

[Michael S.Zick]

Hi,

Does anyone know what became of mkhppa1.esiee.fr ?

New url maybe?  Closed for summer break?

Mike

[parisc-linux] C180 problem

[Anthony Mori]

Acquired a C180, couldn't get it to work at home, so figuring it was
a screen res problem, took it to work. Plugged it into a 20" IBM
monitor, no problem. Booted into HP-UX (as received) just fine.

In the BIOS, I turned fastboot off, then did a reset, and it never came 
up again.

Before I changed the Fastboot, When the machine was turned on,
LED's 2,3,4 were on briefly, then they went out, and LED 1 stayed on.
Then after a briedf pause, 2,3,4 would start flickering as if it was doing
something (which it was).

Now, 2,3,4 turn on briefly, then go out, and LED 1 turns on, and that's
it. Nothing else. No video, nothing (A4071B video card)

I've tried removing the video card, and the FDDI card, but still get the
same.


Any ideas? Anything else need to be done when fastboot is off, like
terminating external scsi port(s), ensuring ethernet is in, etc?? Or should
it still at least boot and give a BIOS message?

Machine config:

C180
256MB RAM
4.3GB Disk
CDROM
Floppy
A4071B Video card


Tony

Re: [parisc-linux] C180 problem

[Grant Grundler]

"Anthony Mori" wrote:
> In the BIOS, I turned fastboot off, then did a reset, and it never came 
> up again.

fastboot flag controls the number and type of self tests the machine
does at poweron. I'd expect the LEDs to indicate what the problem is.
You could try removing all but two DIMMs and then swap to a different
pair if that doesn't work.
And try cycling the power too - that's different than a reset.

grant

Grant Grundler
parisc-linux {PCI|IOMMU|SMP} hacker
+1.408.447.7253

Re: [parisc-linux] C180 problem

[Anthony Mori]

----- Original Message -----
From: "Grant Grundler" <grundler@puffin.external.hp.com>
To: "Anthony Mori" <tonym@compusource.net>
Cc: <parisc-linux@lists.parisc-linux.org>
Sent: Tuesday, July 31, 2001 2:05 AM
Subject: Re: [parisc-linux] C180 problem


> "Anthony Mori" wrote:
> > In the BIOS, I turned fastboot off, then did a reset, and it never came
> > up again.
>
> fastboot flag controls the number and type of self tests the machine
> does at poweron. I'd expect the LEDs to indicate what the problem is.
> You could try removing all but two DIMMs and then swap to a different
> pair if that doesn't work.
> And try cycling the power too - that's different than a reset.

Been there (Power cycling) even disassembled the thing, and reassembled,
just to re-seat everything. I will try the DIMMs when I retrun (on a
business
trip at present)


Thanks!

Tony

Re: [parisc-linux] C180 problem

[Eric Schnoebelen]

"Anthony Mori" writes:
- Before I changed the Fastboot, When the machine was turned on,
- LED's 2,3,4 were on briefly, then they went out, and LED 1 stayed on.
- Then after a briedf pause, 2,3,4 would start flickering as if it was doing
- something (which it was).
- 
- Now, 2,3,4 turn on briefly, then go out, and LED 1 turns on, and that's
- it. Nothing else. No video, nothing (A4071B video card)

	Which LED is `1'?  (whats the lab beside it?)

	According to the C Class (c1x0, c2x0, c3x0) service
handbook, 'net-in' (top or right) LED lit, with no others means
`no memory found.' (with a further comment of ``Likely cause:
SIMMs or processor board'').

	There is fault that leaves the hearbeat LED lit (at
least, not according to the documentation.) The SCSI access LED
lit means ``Processor board fault'' (my C110 currently suffers
this.)

--
Eric Schnoebelen		eric@cirr.com		http://www.cirr.com
	There has been an alarming increase in the number of things
			    you know nothing about.

Re: [parisc-linux] pa-risc project

[Grant Grundler]

"Michael S.Zick" wrote:
> Does anyone know what became of mkhppa1.esiee.fr ?
> New url maybe?  Closed for summer break?

I'd heard that the local network admin closed the "ports"
the web server. And yes - it's summer break there now too.
They might consider moving the content over to www.parisc-linux.org.
I'll see some them in August and talk to them about it.

grant

Grant Grundler
parisc-linux {PCI|IOMMU|SMP} hacker
+1.408.447.7253

[parisc-linux] ESIEE website access is possible now

[Xavier Debacker]

Grant Grundler wrote:

> "Michael S.Zick" wrote:
> > Does anyone know what became of mkhppa1.esiee.fr ?
> > New url maybe?  Closed for summer break?
>
> I'd heard that the local network admin closed the "ports"
> the web server. And yes - it's summer break there now too.
> They might consider moving the content over to www.parisc-linux.org.
> I'll see some them in August and talk to them about it.
>
> grant

During august, our website is accessible through

http://mkhppa02.esiee.fr:8000/

Regards

Xavier.
ESIEE Team.