From: Grant Grundler <grundler@cup.hp.com>
To: hppa-linux@thepuffingroup.com
Subject: Re: [hppa-linux] Boot #4 and source on ftp site
Date: Fri, 12 Mar 1999 15:03:46 -0800 [thread overview]
Message-ID: <199903122303.PAA08417@milano.cup.hp.com> (raw)
In-Reply-To: Your message of "Thu, 11 Mar 1999 16:35:15 PST." <199903112235.QAA05851@equator.com>
Jason Eckhardt wrote:
>
> Boot test #4: This is essentially the same code as #3 but I have taken
> out some delays, modified the cache flush routines, and turned
...
Works on a fairly new 9000/782/C200+
[Party!]
cheers,
grant
Firmware Version 6.1
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State Coprocessor State I/D Cache
--------- -------- --------------------- ----------------- -------------
0 200 MHz Active Functional 512 KB/1 MB
Central Bus Speed (in MHz) : 120
Available memory (bytes) : 268435456
Good memory required (bytes): 21610496
Primary boot path: PCI1.13.0
Alternate boot path: SESCSI.2.0
Console path: GSC1.0.0
Keyboard path: PS2
CPU 0
WARNING: Self tests have been disabled as a result of FASTBOOT
being enabled. To enable self tests, use the FASTBOOT
command in the CONFIGURATION menu and reboot the system.
WARNING: Memory has been initialized, but not tested as a result of
FASTBOOT being enabled. To test memory, use the FASTBOOT
command in the CONFIGURATION menu and reboot the system.
------- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-------
Main Menu: Enter command > pa
Primary boot path: PCI1.13.0
Alternate boot path: SESCSI.2.0
Console path: GSC1.0.0
Keyboard path: PS2
Main Menu: Enter command > bo pci1.12.0
Interact with IPL (Y, N, Q)?> n
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
------------------------------------------------------------------------------
PARISC/Linux Bootstrap Version 0.2 (non-interactive)
By Jason Eckhardt
Built Thu Mar 11 16:01:50 CST 1999 by jason@sathanas
IPL_DEBUG: Page zero parameters:
P0_IMM_max_mem: 268435456 (256 MB)
P0_BOOTCPU_10msec: 2000000 (200 MHz)
P0_BOOTCPU_mem_free: 0x0000C000
P0_BOOTCPU_hpa: 0xFFFA0000
P0_BOOTCPU_pdc: 0x00008000
P0_COUT_iodc_io: 0x0000C000
P0_CIN_iodc_io: 0x0000C000
P0_BOOTDEV_iodc_io: 0x00016000
P0_COUT_class: 0x00000007
P0_CIN_class: 0x00000007
P0_BOOTDEV_class: 0x00000001
Reading parameters...done.
Size = 28672 bytes, entry = 0x00001000, location = 0x0002B040.
Loading kernel...done.
Transferring control to kernel.
*********************************************************
VMLINUX 0.0: Dummy kernel image loaded and executing!
It is now safe to reboot.
next prev parent reply other threads:[~1999-03-12 23:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-03-11 22:35 [hppa-linux] Boot #4 and source on ftp site Jason Eckhardt
1999-03-12 1:25 ` [hppa-linux] Bootstrap #4 successful Helge Deller
1999-03-12 2:33 ` [hppa-linux] Boot #4 and source on ftp site Paul J.Y. Lahaie
1999-03-12 6:54 ` [hppa-linux] Boot #4 dorin
1999-03-12 10:28 ` Hannu Martikka
1999-03-12 22:49 ` [hppa-linux] Boot #4 and source on ftp site Grant Grundler
1999-03-12 23:03 ` Grant Grundler [this message]
1999-03-13 5:21 ` Kumar
1999-03-13 6:46 ` Bill Katz
-- strict thread matches above, loose matches on Subject: below --
1999-03-12 14:23 Muench, David
1999-03-12 19:16 ` Steven Beattie
1999-03-12 22:58 Jason Eckhardt
1999-03-13 23:33 Jason Eckhardt
1999-03-14 4:43 ` Kumar
1999-03-15 16:54 Jason Eckhardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=199903122303.PAA08417@milano.cup.hp.com \
--to=grundler@cup.hp.com \
--cc=hppa-linux@thepuffingroup.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox