From: Matthew Wilcox <willy@thepuffingroup.com>
To: bkatz@agilent.com
Cc: parisc-linux@thepuffingroup.com
Subject: Re: [parisc-linux] How to set serial console on 712 (fwd)
Date: Thu, 23 Dec 1999 11:15:27 -0500 [thread overview]
Message-ID: <19991223111527.L12629@thepuffingroup.com> (raw)
In-Reply-To: <199912231545.HAA07557@meow.sr.hp.com>; from Bill Katz William" on Thu, Dec 23, 1999 at 07:45:00AM -0800
On Thu, Dec 23, 1999 at 07:45:00AM -0800, Bill Katz William" wrote:
> |How do I set the console on my 712 to be the serial port, not the graphics
> |display?
> |
> |Thanks
> |
>
> Boot to ISL and use the conspath
> command to change the console back to rs232. The command to use is:
>
> serial
> conspath 2/0/4.643
> graphics
> conspath 1/0/0.0
This contradicts the PA-RISC Booting HOWTO:
-----
3.1.2.3.3. How can I change the boot console to serial on a 712?
Unfortunately, you can't. Although 712s are configured for in-house HP
development to use serial console, this configuration isn't supported
in the field. You have to use a graphics console for 712s.
-----
I'd like to know if this needs to be corrected.
next prev parent reply other threads:[~1999-12-23 16:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-12-23 15:45 [parisc-linux] How to set serial console on 712 (fwd) Bill Katz (William)
1999-12-23 16:15 ` Matthew Wilcox [this message]
1999-12-23 19:31 ` Matt Taggart
1999-12-23 20:19 ` MaShaun Jones
1999-12-23 21:34 ` Matt Taggart
1999-12-23 21:35 ` Matthew Wilcox
1999-12-30 15:36 ` Grant Grundler
-- strict thread matches above, loose matches on Subject: below --
1999-12-24 8:19 Tom Gallagher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19991223111527.L12629@thepuffingroup.com \
--to=willy@thepuffingroup.com \
--cc=bkatz@agilent.com \
--cc=parisc-linux@thepuffingroup.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox