Linux PARISC architecture development
 help / color / mirror / Atom feed
From: Tom Gallagher <teg@cableinet.co.uk>
To: taggart@rascal.fc.hp.com, parisc-linux@thepuffingroup.com
Subject: RE: [parisc-linux] How to set serial console on 712 (fwd)
Date: Fri, 24 Dec 1999 08:19:06 +0000	[thread overview]
Message-ID: <38632C7A.BECFE291@cableinet.co.uk> (raw)

I seem to have managed to set my console on my 712 to be neither serial
or graphics.  When HPUX boots it seems to detect the console is serial
and I get a login prompt and console messages on my serial terminal, but
it is not really the console as I see no messages from ISL etc on the
serial port.
I think I incorrectly typed the console path when I changed it :( .

The machine boots fine and I can telnet to it etc, but I have no way of
accessing the PDC/ISL.  Before I managed to do this I upgraded it to the
lastest firmware.

Is there some HPUX (10.20) command or trick to alter PDC? ISL?
information to reset my console to a sane state?

I have tried unplugging the keyboard/disks/LAN pretty much everything
really to try to reset it to some factory default.

Thanks.

             reply	other threads:[~1999-12-24  8:17 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
1999-12-24  8:19 Tom Gallagher [this message]
1999-12-24 11:52 ` [parisc-linux] Firmware (was How to set serial ..) Sandy Harris
1999-12-24 18:26   ` Michael Shalayeff
  -- strict thread matches above, loose matches on Subject: below --
1999-12-23 15:45 [parisc-linux] How to set serial console on 712 (fwd) Bill Katz (William)
1999-12-23 16:15 ` Matthew Wilcox
1999-12-23 19:31   ` Matt Taggart
1999-12-23 20:19     ` MaShaun Jones
1999-12-23 21:34       ` Matt Taggart
1999-12-23 21:35       ` Matthew Wilcox
1999-12-30 15:36       ` Grant Grundler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=38632C7A.BECFE291@cableinet.co.uk \
    --to=teg@cableinet.co.uk \
    --cc=parisc-linux@thepuffingroup.com \
    --cc=taggart@rascal.fc.hp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox