[parisc-linux] Need second ethernet card connector on a 712 hp wks

[parisc-linux] Need second ethernet card connector on a 712 hp wks

[T.J.Yang]

Hi, there

I am lucky enough to acquire a 712/100 machine with second
ethernet card(both AUI/RS232) on it. But the problem is 
that I can't find the connector for it.

It has three rows of pins (9+9+8) while the reqular
AUI is 8+7. 

The system is running 10.20 and lan1 is congiured to
be 192.168.2.1 and accpeted the ping back.

Anybody know where can I find the connector(adpator) ?

So close yet so far !!!

Thanks in advance

tj

Re: [parisc-linux] Need second ethernet card connector on a 712 hp wks

[Rajiv Dighe]

Do you know what the part number for the card is? If you can e-mail the part number, it will be helpful in determining what sort of connector is needed.

--Rajiv

Re: [parisc-linux] Need second ethernet card connector on a 712 hp wks

[Grant Grundler]

"T.J.Yang" wrote:
> Hi, there
> 
> I am lucky enough to acquire a 712/100 machine with second
> ethernet card(both AUI/RS232) on it. But the problem is 
> that I can't find the connector for it.
> 
> It has three rows of pins (9+9+8) while the reqular
> AUI is 8+7. 

tj,
I've already asked about this "y-cable" and posted the part numbers
last month. Please check the archive. I have three of the LAN/SERIAL
combo cards (aka lasi-on-a-card) but no y-cables.

grant

Grant Grundler
Unix Development Lab
+1.408.447.7253

Re: [parisc-linux] Need second ethernet card connector on a 712 hp wks

[T. Martin]

Hi
 I have a 715/50 running on my LAN (setiathome) I found an old AUI -> BNC
(10Base2) and used it with the AUI it tranfers at over 1024kb/s with my
SMC cards in my Linux box, I'll never buy a generic NE2k again. 

 AUI->BNC aren't real cheap you'll have to shop around to get a good
price I've seen on egghead for $35 
Terry


On Mon, 20 Mar 2000, T.J.Yang wrote:

> Hi, there
> 
> I am lucky enough to acquire a 712/100 machine with second
> ethernet card(both AUI/RS232) on it. But the problem is 
> that I can't find the connector for it.
> 
> It has three rows of pins (9+9+8) while the reqular
> AUI is 8+7. 
> 
> The system is running 10.20 and lan1 is congiured to
> be 192.168.2.1 and accpeted the ping back.
> 
> Anybody know where can I find the connector(adpator) ?
> 
> So close yet so far !!!
> 
> Thanks in advance
> 
> tj
> 
> ---------------------------------------------------------------------------
> To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
> `unsubscribe' as the subject.
> 
> 

Re: [parisc-linux] Need second ethernet card connector on a 712 hpwks

[T.J. Yang]

Hi, T. Martin

The card is an add-on ethernet/rs232 combo card. The HP part number
is
1. A-3422-40 printed on the card or
2. A4014A according to the system compatibilty hardwre list manual in pdf
format on puffing web site.

It's output connector is 9+9+8 pins femal connector which required
a special 1 split into 2 cable(Y) for rs232 and AUI/RJ45 ? connection.

I tried http://www.pccables.com with no success.

Any one know where can I buy it  in Canada ?

thanks

tj
----- Original Message -----
From: "T. Martin" <catfish@alltel.net>
To: "T.J.Yang" <tjyang@myrealbox.com>
Cc: <parisc-linux@thepuffingroup.com>
Sent: Monday, March 20, 2000 6:40 PM
Subject: Re: [parisc-linux] Need second ethernet card connector on a 712
hpwks


>
> Hi
>  I have a 715/50 running on my LAN (setiathome) I found an old AUI -> BNC
> (10Base2) and used it with the AUI it tranfers at over 1024kb/s with my
> SMC cards in my Linux box, I'll never buy a generic NE2k again.
>
>  AUI->BNC aren't real cheap you'll have to shop around to get a good
> price I've seen on egghead for $35
> Terry
>
>
> On Mon, 20 Mar 2000, T.J.Yang wrote:
>
> > Hi, there
> >
> > I am lucky enough to acquire a 712/100 machine with second
> > ethernet card(both AUI/RS232) on it. But the problem is
> > that I can't find the connector for it.
> >
> > It has three rows of pins (9+9+8) while the reqular
> > AUI is 8+7.
> >
> > The system is running 10.20 and lan1 is congiured to
> > be 192.168.2.1 and accpeted the ping back.
> >
> > Anybody know where can I find the connector(adpator) ?
> >
> > So close yet so far !!!
> >
> > Thanks in advance
> >
> > tj
> >
>
> --------------------------------------------------------------------------
-
> > To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com
with
> > `unsubscribe' as the subject.
> >
> >
>
> --------------------------------------------------------------------------
-
> To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com
with
> `unsubscribe' as the subject.
>
>