* Re: [parisc-linux] FW Scsi support?
2000-08-27 21:52 [parisc-linux] FW Scsi support? Erik Paulson
@ 2000-08-28 0:54 ` Bob Pflederer
2000-08-28 11:29 ` Matthew Wilcox
1 sibling, 0 replies; 3+ messages in thread
From: Bob Pflederer @ 2000-08-28 0:54 UTC (permalink / raw)
To: Erik Paulson; +Cc: parisc-linux
[-- Attachment #1: Type: text/plain, Size: 1051 bytes --]
There have been some fixes to the kernel since the CDROM image was made
to get the U2 IO controller working correctly. Also, I still need to apply
the attached patch to get my C180 working. The C160 should be the same as
C180 except for the frequency. The C100 uses a PA7200 CPU instead of
PA8000 CPU and will not work with my entry.S changes, but may work if you
remove that portion of the patch.
My CDROM is not fastwide SCSI, but the kernel does detect the fastwide SCSI
harddrive. I boot by LAN, but am able to mount CDROMs.
-Bob Pflederer
On Sun, Aug 27, 2000 at 04:52:29PM -0500, Erik Paulson wrote:
> Hi
> I'm trying to get my C100 and C160 to boot with the CD image. Everything
> seems fine, except they don't see the SCSI disk I've got - only the CDROM.
>
> My guess is that they're angry about it being on the FWSCSI, (my CDROM is
> on SESCSI)
>
> Is Fastwide SCSI supported? If not, what needs to be done? I didn't see how
> to turn it on with 'make config'. Are there docs availble for this hardware?
>
> Thanks!
>
> -Erik
>
[-- Attachment #2: c180.patch --]
[-- Type: text/plain, Size: 3520 bytes --]
Index: arch/parisc/kernel/ccio-dma.c
===================================================================
RCS file: /home/cvs/parisc/linux-2.3/arch/parisc/kernel/ccio-dma.c,v
retrieving revision 1.3
diff -u -p -r1.3 ccio-dma.c
--- ccio-dma.c 2000/08/24 05:06:38 1.3
+++ ccio-dma.c 2000/08/28 00:35:36
@@ -53,8 +53,8 @@
*/
#define MODULE_NAME "ccio"
-/*
#define DEBUG_CCIO_INIT
+/*
#define DEBUG_CCIO_RUN
#define DEBUG_CCIO_RES
*/
@@ -785,6 +785,15 @@ STATIC void ccio_unmap_sg(struct pci_dev
return;
}
+void
+ccio_dma_sync_single(struct pci_dev *dev, dma_addr_t iova, size_t size, int direction)
+{
+}
+
+void
+ccio_dma_sync_sg(struct pci_dev *dev, struct scatterlist *sg, int nelems, int direction)
+{
+}
STATIC struct pci_dma_ops ccio_ops = {
ccio_dma_supported,
@@ -794,8 +803,8 @@ STATIC struct pci_dma_ops ccio_ops = {
ccio_unmap_single,
ccio_map_sg,
ccio_unmap_sg,
- NULL, /* dma_sync_single : NOP for U2/Uturn */
- NULL, /* dma_sync_sg : ditto */
+ ccio_dma_sync_single, /* dma_sync_single : NOP for U2/Uturn */
+ ccio_dma_sync_sg, /* dma_sync_sg : ditto */
};
Index: arch/parisc/kernel/entry.S
===================================================================
RCS file: /home/cvs/parisc/linux-2.3/arch/parisc/kernel/entry.S,v
retrieving revision 1.25
diff -u -p -r1.25 entry.S
--- entry.S 2000/08/24 23:05:17 1.25
+++ entry.S 2000/08/28 00:35:45
@@ -637,6 +637,8 @@ dtlb_miss:
depi 1,12,1,prot
extru,= pte,_PAGE_USER_BIT,1,r0
depi 7,11,3,prot /* Set for user space (1 rsvd for read) */
+ extru,= pte,_PAGE_GATEWAY_BIT,1,r0
+ depi 0,11,2,prot /* If Gateway, Set PL2 to 0 */
/* Get rid of prot bits and convert to page addr for idtlba */
@@ -646,9 +648,18 @@ dtlb_miss:
mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */
mtsp spc,%sr1
+/*
idtlba pte,(%sr1,va)
idtlbp prot,(%sr1,va)
+ depd pte,31,32,pte
+ depdi 0,45,14,pte
+ idtlbt pte,prot
+*/
+ .word 0xf2310c00
+ .word 0xf6200652
+ .word 0x06301800
+
mtsp t0, %sr1 /* Restore sr1 */
rfir
@@ -694,6 +705,8 @@ itlb_miss_common:
copy spc,prot /* init prot with faulting space */
dep pte,8,7,prot
+ extru,= pte,_PAGE_NO_CACHE_BIT,1,r0
+ depi 1,12,1,prot
extru,= pte,_PAGE_USER_BIT,1,r0
depi 7,11,3,prot /* Set for user space (1 rsvd for read) */
extru,= pte,_PAGE_GATEWAY_BIT,1,r0
@@ -706,10 +719,19 @@ itlb_miss_common:
mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */
mtsp spc,%sr1
-
+/*
iitlba pte,(%sr1,va)
iitlbp prot,(%sr1,va)
+ depd pte,31,32,pte
+ depdi 0,45,14,pte
+ iitlbt pte,prot
+*/
+
+ .word 0xf2310c00
+ .word 0xf6200652
+ .word 0x06300800
+
mtsp t0, %sr1 /* Restore sr1 */
rfir
@@ -755,6 +777,8 @@ dbit_trap:
depi 1,12,1,prot
extru,= pte,_PAGE_USER_BIT,1,r0
depi 7,11,3,prot /* Set for user space (1 rsvd for read) */
+ extru,= pte,_PAGE_GATEWAY_BIT,1,r0
+ depi 0,11,2,prot /* If Gateway, Set PL2 to 0 */
/* Get rid of prot bits and convert to page addr for idtlba */
@@ -763,9 +787,17 @@ dbit_trap:
mfsp %sr1,t0 /* Save sr1 so we can use it in tlb inserts */
mtsp spc,%sr1
-
+/*
idtlba pte,(%sr1,va)
idtlbp prot,(%sr1,va)
+
+ depd pte,31,32,pte
+ depdi 0,45,14,pte
+ idtlbt pte,prot
+*/
+ .word 0xf2310c00
+ .word 0xf6200652
+ .word 0x06301800
mtsp t0, %sr1 /* Restore sr1 */
[-- Attachment #3: c180.log --]
[-- Type: text/plain, Size: 8887 bytes --]
\rMain Menu: Enter command >
\rMain Menu: Enter command > bo lan
\rInteract with IPL (Y, N, Q)?> y
Booting...
Network Station Address 0060b0-1839c0
System IP Address 192.168.0.250
Server IP Address 192.168.0.1
Boot IO Dependent Code (IODC) revision 2
HARD Booted.
palo ipl krp@localhost.localdomain Sun Aug 27 19:34:20 CDT 2000
0/vmlinux 2087866 bytes @ 0x6800
0/palo-cmdline '0/vmlinux HOME=/ TERM=LINUX root=/dev/nfs nfsroot=192.168.0.7 '
0/vmlinux HOME=/ TERM=LINUX root=/dev/nfs nfsroot=192.168.0.7
Kernel: partition 0 file /vmlinux
ELF32 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 1510260 mediaptr 0x1000
Segment 1 load 00272000 size 115444 mediaptr 0x172000
Segment 2 load 00290000 size 115080 mediaptr 0x18f000
Segment 3 load 002b0000 size 8192 mediaptr 0x1ac000
branching to kernel entry point 0x00100000
pdc_cons registered !
The Kernel has started...
Free memory starts at: 0xc02e1000
PALO command line: 'HOME=/ TERM=LINUX root=/dev/nfs nfsroot=192.168.0.7 '
PALO initrd 0-0
FP CCR was 0x0, will be set to 0xc0
model 000059c0 00000481 00000000 00000002 77422781 100000f0 00000008 000000b2 000000b2
vers 00000205
cpuid 000001c9
CPUID vers 14 rev 9
CPU might be a PA8000 (PCX-U)
CPU(s): 1 x PA8000 (PCX-U) at 180.000000 MHz
Searching for devices in PDC firmware... a newer box...
Found devices:
1. Unknown device (4) at 0xf200c000, versions 0x3b, 0x0, 0x89, 0x0, 0x80
2. Raven U/L2 Core BA (11) at 0xffd00000, versions 0x3b, 0x0, 0x81, 0x0, 0x0
3. Raven U/L2 Core RS-232 (10) at 0xffd05000, versions 0x3b, 0x0, 0x8c, 0x0, 0x0
4. Raven U/L2 Core SCSI (10) at 0xffd06000, versions 0x3b, 0x0, 0x82, 0x0, 0x0
5. Raven U/L2 Core Lan (802.3) (10) at 0xffd07000, versions 0x3b, 0x0, 0x8a, 0x0, 0x0
6. UL 350 Core Centronics (10) at 0xffd02000, versions 0x2e, 0x0, 0x74, 0x0, 0x0
7. Raven U/L2 Core Audio (10) at 0xffd04000, versions 0x3b, 0x4, 0x7b, 0x0, 0x0
8. Raven U/L2 Core PC Keyboard (10) at 0xffd08000, versions 0x3b, 0x0, 0x84, 0x0, 0x0
9. Raven U/L2 Core PC Keyboard (10) at 0xffd08100, versions 0x3b, 0x0, 0x84, 0x0, 0x0
10. Raven Backplane Wax BA (11) at 0xffe00000, versions 0x17, 0x0, 0x8e, 0x0, 0x0
11. Raven Backplane Wax EISA BA (11) at 0xfc000000, versions 0x17, 0x0, 0x90, 0x0, 0x0
12. Raven Backplane Wax HIL (10) at 0xffe01000, versions 0x17, 0x0, 0x73, 0x0, 0x0
13. Raven Backplane RS-232 (10) at 0xffe02000, versions 0x17, 0x0, 0x8c, 0x0, 0x0
14. Gecko GSC Core Graphics (10) at 0xfa000000, versions 0x16, 0x0, 0x85, 0x0, 0x0
15. U2-IOA BC GSC+ Port (7) at 0xf203f000, versions 0x501, 0x1, 0xc, 0x3, 0x0
16. U2-IOA BC GSC+ Port (7) at 0xf103f000, versions 0x501, 0x1, 0xc, 0x3, 0x0
17. Dino PCI Bridge (13) at 0xf2000000, versions 0x680, 0x1, 0xa, 0x0, 0x0
That's a total of 17 devices.
Linux version 2.4.0-test6 (krp@localhost.localdomain) (gcc version 2.96 20000707 (experimental)) #34 Sun Aug 27 19:33:37 CDT 2000
initrd: 00000000-00000000
pagetable_init
On node 0 totalpages: 32768
zone(0): 16384 pages.
zone(1): 16384 pages.
zone(2): 0 pages.
Kernel command line: HOME=/ TERM=LINUX root=/dev/nfs nfsroot=192.168.0.7
trap_init
Calibrating delay loop... 286.72 BogoMIPS
Memory: 125676k available
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Lasi version 0 at 0xffd00000 found.
Wax at 0xffe00000 found.
Wax: HIL Keyboard-NMI registered.
parport0: PC-style at 0xffd02800, irq 536 [PCSPP,TRISTATE]
Found i82596 at 0xffd07000, IRQ 535
early initialization of device eth0 is deferred
Initializing lasi keyboard port at 0xffd08000...
Initializing lasi mouse port at 0xffd08100...
Found HIL at 0xffe01000, IRQ 798
No handler for interrupt 259 !
HIL: timed out, assuming no keyboard present.
Warning : device (10, 0x17, 0x0, 0x73, 0x0) NOT claimed by HIL 712, 715 or similiar
Dino version 2.1 (bridge mode) found at 0xf2000000
The GSCtoPCI (Dino hrev 1) bus converter found may exhibit
data corruption. See Service Note Numbers: A4190A-01, A4191A-01.
Systems shipped after Aug 20, 1997 will not exhibit this problem.
Models affected: C180, C160, C160L, B160L, and B132L workstations.
dino_bridge_init: IO_ADDR_EN hasn't been configured.
kernel BUG at dino.c:646!
ccio found U2 GSC+ BC at 0xf203f000
ccio_alloc_pdir hpa 0xfff88000 mem 128MB IOV 8MB (23 bits)
PDIR size 0x4000 base c7f90000 chainid_shift 0xf
ccio_resmap_init() res_size 0x100
ccio found U2 GSC+ BC at 0xf103f000
ccio: already initialized one device
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Starting kswapd v1.7
pty: 256 Unix98 ptys configured
lp0: using parport0 (interrupt-driven).
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
sim700: Configuring 53c710 (SCSI-ID 7) at ffd06100, IRQ 534
scsi0: Revision 0x2
Post test1, istat 01, sstat0 00, dstat 84
sim700: WARNING IRQ probe failed, (returned 0)
scsi0: Good, target data areas are dma coherent
scsi0: test 1 completed ok.
scsi0: sim700_intr_handle() called with no interrupt
zalon_scsi_callback: Zalon vers field is 0x1, IRQ 260
ncr53c8xx: 53c720 detected
ncr53c720-0: ID 7, Fast-10, Parity Checking, Differential
ncr53c720-0: restart (scsi reset).
scsi0 : LASI/Simple 53c7xx
scsi1 : ncr53c8xx - version 3.3b
scsi : 2 hosts.
Vendor: TOSHIBA Model: CD-ROM XM-5401TA Rev: 1036
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Vendor: SEAGATE Model: ST34371W Rev: HP03
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi1, channel 0, id 6, lun 0
ncr53c720-0-<6,0>: tagged command queue depth set to 8
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
Uniform CD-ROM driver Revision: 3.11
ncr53c720-0-<6,0>: wide msgout: 1-2-3-1.
ncr53c720-0-<6,0>: wide msgin: 1-2-3-1.
ncr53c720-0-<6,0>: wide: wide=1 chg=0.
ncr53c720-0-<6,0>: sync_msgout: 1-3-1-19-8.
ncr53c720-0-<6,0>: sync msgin: 1-3-1-19-8.
ncr53c720-0-<6,0>: sync: per=25 scntl3=0x10 ofs=8 fak=0 chg=0.
ncr53c720-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8388314 [4095 MB] [4.1 GB]
Partition check:
sda: unknown partition table
eth0: 82596 at 0xffd07000, 00 60 B0 18 39 C0 IRQ 535.
82596.c $Revision: 1.12 $
Serial driver version 5.01 (2000-05-29) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Found serial #0 at 0xffd05000, IRQ 538
ttyS00 at iomem 0xffd05800 (irq = 538) is a 16550A
Found serial #1 at 0xffe02000, IRQ 793
ttyS01 at iomem 0xffe02800 (irq = 793) is a 16550A
eth0: link ok.
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.0.1, my address is 192.168.0.250
Switching from PDC console
kmem_create: Forcing size word alignment - nfs_fh
\rLooking up port of RPC 100003/2 on 192.168.0.7
\rLooking up port of RPC 100005/2 on 192.168.0.7
\rVFS: Mounted root (nfs filesystem) readonly.
\rexecve /sbin/init c0272008 c0272030
\rFri Aug 4 01:33:00 /home/bame/xc/hppa 2000
dd: /dev/zero: Bad address
0+0 records in
0+0 records out
mke2fs 1.19-WIP, 7-Jul-2000 for EXT2 FS 0.5b, 95/08/09
ext2fs_check_if_mount: No such file or directory while determining whether /dev/ram is mounted.
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
1024 inodes, 4096 blocks
0 blocks (0.00%) reserved for the super user
First data block=1
1 block group
8192 blocks per group, 8192 fragments per group
1024 inodes per group
Writing inode tables: 0/1\b\b\bdone
Writing superblocks and filesystem accounting information: done
Welcome to PA/Linux release 0.1
(release 0.1 means don't expect much from it!)
In addition to the bootable image, this CD contains cross compilers,
source code, and documentation. You can initialize a bootable PA-RISC
hard disk from this CD too. Read /README to find out more.
Since progress never stops, by the time you boot this it'll be out of
date, so check out http://www.thepuffingroup.com/parisc/ for the latest.
Login as a superuser login: root password: root
or as a normal user login: demo password: demo
h47clk1p login: Login timed out after 60 seconds
^ permalink raw reply [flat|nested] 3+ messages in thread