[parisc-linux] visualize C360/785 install

[parisc-linux] visualize C360/785 install

[Kurc, Marcin A.]

Did anyone have any luck installing parisc-linux on HP visualize C360 (785)?

Marcin Kurc
CAD Systems Administrator
Cooper-Standard Automotive

Re: [parisc-linux] visualize C360/785 install

[Matthew Wilcox]

On Mon, Aug 27, 2001 at 04:24:08PM -0400, Kurc, Marcin A. wrote:
> Did anyone have any luck installing parisc-linux on HP visualize C360 (785)?

Ought to work.  Don't have one here, but Richard has one.

-- 
Revolutions do not require corporate support.

RE: [parisc-linux] visualize C360/785 install

[Kurc, Marcin A.]

I've problems booting it from cd.
Here is what I get

HARD Booted.
palo ipl 0.92 root@spqr Mon Jun 25 23:03:13 CEST 2001
.........

Kernel: partition 0 file /vmlinux
Ramdisk: partition 0 file /ramdisk
Warning: kernel name doesn't end with 32 or 64... Guessing 32
ELF32 executable
Entry 00100000 first 00100000 n 4
Segment 0 load 00100000 size 1606948 mediaptr 0x1000
Segment 1 load 0028a000 size 468472 mediaptr 0x18a000
Segment 2 load 00300000 size 8192 mediaptr 0x1fd000
Segment 3 load 0034bea8 size 80688 mediaptr 0x1ffea8
Loading ramdisk 1991209 bytes @ 3fe09000...
branching to kernel entry point 0x00100000
Set default PSW W bit to 0


and then it hangs. Do you know what could be wrong?

thanks

-----Original Message-----
From: Matthew Wilcox [mailto:willy@debian.org]
Sent: Monday, August 27, 2001 4:39 PM
To: Kurc, Marcin A.
Cc: 'parisc-linux@lists.parisc-linux.org'
Subject: Re: [parisc-linux] visualize C360/785 install


On Mon, Aug 27, 2001 at 04:24:08PM -0400, Kurc, Marcin A. wrote:
> Did anyone have any luck installing parisc-linux on HP visualize C360
(785)?

Ought to work.  Don't have one here, but Richard has one.

-- 
Revolutions do not require corporate support.

Re: [parisc-linux] visualize C360/785 install

[Ryan Bradetich]

I see a very similar problem on the C200+ and it has to do
with the console code.  To see more information you can do
the following in arch/parisc/kernel/pdc_cons.c:

	1. #define EARLY_BOOTUP_DEBUG
	
 	2. Remove CON_BOOT from the flags in
	   struct console.

This should enable you to see additional messages.

Hope that helps!

- Ryan

On Tue, Aug 28, 2001 at 08:21:06AM -0400, Kurc, Marcin A. wrote:
> I've problems booting it from cd.
> Here is what I get
> 
> HARD Booted.
> palo ipl 0.92 root@spqr Mon Jun 25 23:03:13 CEST 2001
> .........
> 
> Kernel: partition 0 file /vmlinux
> Ramdisk: partition 0 file /ramdisk
> Warning: kernel name doesn't end with 32 or 64... Guessing 32
> ELF32 executable
> Entry 00100000 first 00100000 n 4
> Segment 0 load 00100000 size 1606948 mediaptr 0x1000
> Segment 1 load 0028a000 size 468472 mediaptr 0x18a000
> Segment 2 load 00300000 size 8192 mediaptr 0x1fd000
> Segment 3 load 0034bea8 size 80688 mediaptr 0x1ffea8
> Loading ramdisk 1991209 bytes @ 3fe09000...
> branching to kernel entry point 0x00100000
> Set default PSW W bit to 0
> 
> 
> and then it hangs. Do you know what could be wrong?
> 
> thanks
> 
> -----Original Message-----
> From: Matthew Wilcox [mailto:willy@debian.org]
> Sent: Monday, August 27, 2001 4:39 PM
> To: Kurc, Marcin A.
> Cc: 'parisc-linux@lists.parisc-linux.org'
> Subject: Re: [parisc-linux] visualize C360/785 install
> 
> 
> On Mon, Aug 27, 2001 at 04:24:08PM -0400, Kurc, Marcin A. wrote:
> > Did anyone have any luck installing parisc-linux on HP visualize C360
> (785)?
> 
> Ought to work.  Don't have one here, but Richard has one.
> 
> -- 
> Revolutions do not require corporate support.
> 
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux
> 

-- 

Re: [parisc-linux] visualize C360/785 install

[Richard Hirst]

On Mon, Aug 27, 2001 at 10:38:33PM +0100, Matthew Wilcox wrote:
> On Mon, Aug 27, 2001 at 04:24:08PM -0400, Kurc, Marcin A. wrote:
> > Did anyone have any luck installing parisc-linux on HP visualize C360 (785)?
> 
> Ought to work.  Don't have one here, but Richard has one.

Yes I do - it works for me, although I've only used serial console.
Are you using serial or graphical console?

Richard

RE: [parisc-linux] visualize C360/785 install

[Kurc, Marcin A.]

I'm using graphical console, have to dig up a serial one somewhere :)

thanks

-----Original Message-----
From: Richard Hirst [mailto:rhirst@linuxcare.com]
Sent: Tuesday, August 28, 2001 11:36 AM
To: Kurc, Marcin A.
Cc: 'parisc-linux@lists.parisc-linux.org'
Subject: Re: [parisc-linux] visualize C360/785 install


On Mon, Aug 27, 2001 at 10:38:33PM +0100, Matthew Wilcox wrote:
> On Mon, Aug 27, 2001 at 04:24:08PM -0400, Kurc, Marcin A. wrote:
> > Did anyone have any luck installing parisc-linux on HP visualize C360
(785)?
> 
> Ought to work.  Don't have one here, but Richard has one.

Yes I do - it works for me, although I've only used serial console.
Are you using serial or graphical console?

Richard

Re: [parisc-linux] visualize C360/785 install

['Richard Hirst']

On Tue, Aug 28, 2001 at 01:00:13PM -0400, Kurc, Marcin A. wrote:
> I'm using graphical console, have to dig up a serial one somewhere :)

Most people just run minicom on another linux box and link
the two with a crossover cable.

Richard

RE: [parisc-linux] visualize C360/785 install

[Kurc, Marcin A.]

I guess that's what I have to do, I found a serial console, but the menus
are all screwed up so it won't work. 
Now the only problem is to find an i386 box to put linux on :)

Anyway, thank you everybody for helping me.

-----Original Message-----
From: 'Richard Hirst' [mailto:rhirst@linuxcare.com]
Sent: Tuesday, August 28, 2001 12:14 PM
To: Kurc, Marcin A.
Cc: 'parisc-linux@lists.parisc-linux.org'
Subject: Re: [parisc-linux] visualize C360/785 install


On Tue, Aug 28, 2001 at 01:00:13PM -0400, Kurc, Marcin A. wrote:
> I'm using graphical console, have to dig up a serial one somewhere :)

Most people just run minicom on another linux box and link
the two with a crossover cable.

Richard