From: Richard Hirst <rhirst@linuxcare.com>
To: Boyan Lazarov <bsl@mek.dtu.dk>
Cc: parisc-linux <parisc-linux@lists.parisc-linux.org>
Subject: Re: [parisc-linux] Installing on Apollo 735
Date: Mon, 10 Sep 2001 13:41:34 +0100 [thread overview]
Message-ID: <20010910134134.V19441@linuxcare.com> (raw)
In-Reply-To: <3B9CAC65.E1096C44@mek.dtu.dk>; from bsl@mek.dtu.dk on Mon, Sep 10, 2001 at 02:04:53PM +0200
On Mon, Sep 10, 2001 at 02:04:53PM +0200, Boyan Lazarov wrote:
> The system just stop
> The boot parameters are :
> 0: 0/vmlinux
> 1: root=/dev/ram
> 2: initrd=0/ramdisk
> 3: console=ttyS0
> 4: TERM=vt102
> 5: sim700=noneg:0xff,nodisc:0xff
> 6: isl
>
> And the output is:
> SCSI subsystem driver Revision: 1.00
> sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, IRQ 86, options 1
> scsi0: Revision 0x0
> scsi0: test 1 completed ok.
> scsi0 : LASI/Simple 53c7xx
> Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02
> Type: CD-ROM ANSI SCSI revision: 02
> scsi0: Unable to abort command for target 5
> scsi0: Unable to send Bus Device Reset for target 5
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: istat = 0c, sstat0 = 00, sstat1 = 00, dstat = 00
> scsi0: dsp = 07875060 (script[0x1418]), dsps = 078751f0, target = 0
> scsi0: Failing command for ID5
> Vendor: SEAGATE Model: ST31200N Rev: 8714
> Type: Direct-Access ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
>
> After this the system just stops
That's not good. Can you try with just sim700=nodisc:0xff
please.
Richard
next prev parent reply other threads:[~2001-09-10 12:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-09 17:14 [parisc-linux] Installing on Apollo 735 Boyan Lazarov
2001-09-10 7:32 ` Richard Hirst
2001-09-10 8:03 ` Boyan Lazarov
2001-09-10 9:36 ` Richard Hirst
2001-09-10 12:04 ` Boyan Lazarov
2001-09-10 12:41 ` Richard Hirst [this message]
2001-09-10 12:55 ` Boyan Lazarov
2001-09-10 13:19 ` Richard Hirst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010910134134.V19441@linuxcare.com \
--to=rhirst@linuxcare.com \
--cc=bsl@mek.dtu.dk \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox