[parisc-linux] LED blinking ;-(

[parisc-linux] LED blinking ;-(

[Bjoern A. Zeeb]

Hi,

had my apollo 715 updated this weekend and perhaps because the machine
stood somewhere else I never had noticed that the LED 4 (OS running) has
been blinking.

Well I have no idea who is responsible for this the OS or the
machine(firmware) but ...

... can one change this to a constant on ? - or at least not blinking
that frequent or in a radom intervall ?

I feel it very maddening the way it is at the monent ;-(

TIA

-- 
Bjoern A. Zeeb				bzeeb at Zabbadoz dot NeT
56 69 73 69 74				http://www.zabbadoz.net/

Re: [parisc-linux] LED blinking ;-(

[Helge Deller]

On Sunday 06 January 2002 17:33, Bjoern A. Zeeb wrote:
> Hi,

Hi Bjoern,

> had my apollo 715 updated this weekend and perhaps because the machine
> stood somewhere else I never had noticed that the LED 4 (OS running) has
> been blinking.
> Well I have no idea who is responsible for this the OS or the
> machine(firmware) but ...

AFAIK, I am.

> ... can one change this to a constant on ? - or at least not blinking
> that frequent or in a radom intervall ?

I assume you talk about the "Heartbeat LED" with which we blink in the
same frequency as a heart. That's also the behaviour under HP/UX.

You may see the actual values with:
pa64:~# cat /proc/pdc/led
Heartbeat: 1
Disk IO: 1
LAN Rx/Tx: 1

and change it with one of the following commands:
pa64:~# echo "0 1 1" > /proc/pdc/led
turns off only the heartbeat LED,
pa64:~# echo "0 0 0" > /proc/pdc/led
turns off all LEDs.

Helge

Re: [parisc-linux] LED blinking ;-(

[Bjoern A. Zeeb]

On Sun, 6 Jan 2002, Helge Deller wrote:

> On Sunday 06 January 2002 17:33, Bjoern A. Zeeb wrote:
>
> > ... can one change this to a constant on ? - or at least not blinking
> > that frequent or in a radom intervall ?
>
> I assume you talk about the "Heartbeat LED" with which we blink in the
> same frequency as a heart. That's also the behaviour under HP/UX.

don't know. only seen a hp/ux once on that machine ;-)

> and change it with one of the following commands:
> pa64:~# echo "0 1 1" > /proc/pdc/led
> turns off only the heartbeat LED,

Ahh :-)) It's on now. No more blinking.
Much better like this and the machine can live where it is :-)

Thanks a lot.

-- 
Bjoern A. Zeeb				bzeeb at Zabbadoz dot NeT
56 69 73 69 74				http://www.zabbadoz.net/