* [parisc-linux] [Re]: B2000
@ 2002-01-22 19:09 jsoe0708
2002-01-23 2:07 ` [parisc-linux] " Grant Grundler
0 siblings, 1 reply; 4+ messages in thread
From: jsoe0708 @ 2002-01-22 19:09 UTC (permalink / raw)
To: parisc-linux; +Cc: grundler, Hans.Witvliet
Hi all,
Just to relate an experience:
For my part, I just take the CD-0.9.3 and try to boot it with a B2000 and it
failled also for me with similar messages if I use the STI buildin console.
Well,... I disconnect ps/2 kbd and mouse and use a serial console (emulating
vt100) and it boot correctly (with internal ide cdrom drive) at leat till the 2
first Debian/GNU install dialog box. (I did not install actually because I have
not disk to use so it is possible that it would failled later because of ide
drive?).
Is it help?
Joel
-------------------------------------------------
This mail sent through Tiscali Webmail (http://webmail.tiscali.be)
^ permalink raw reply [flat|nested] 4+ messages in thread
* [parisc-linux] Re: [Re]: B2000
2002-01-22 19:09 [parisc-linux] [Re]: B2000 jsoe0708
@ 2002-01-23 2:07 ` Grant Grundler
2002-01-23 6:53 ` jsoe0708
0 siblings, 1 reply; 4+ messages in thread
From: Grant Grundler @ 2002-01-23 2:07 UTC (permalink / raw)
To: jsoe0708; +Cc: parisc-linux, Hans.Witvliet
jsoe0708@tiscali.be wrote:
> Hi all,
>
> Just to relate an experience:
>
> For my part, I just take the CD-0.9.3 and try to boot it with a B2000 and it
> failled also for me with similar messages if I use the STI buildin console.
> Well,... I disconnect ps/2 kbd and mouse and use a serial console (emulating
> vt100) and it boot correctly (with internal ide cdrom drive) at leat till the
> 2
> first Debian/GNU install dialog box.
Yes - and that's as far as it will go.
palo uses IODC ("BIOS") to load the vmlinux.
That vmlinux does not know how to talk to the IDE CD-ROM interface
and can't load anything else. One should be able to do a network
install but start out by booting the ISO image.
grant
^ permalink raw reply [flat|nested] 4+ messages in thread
* [parisc-linux] Re: [Re]: B2000
2002-01-23 2:07 ` [parisc-linux] " Grant Grundler
@ 2002-01-23 6:53 ` jsoe0708
2002-01-25 5:56 ` Grant Grundler
0 siblings, 1 reply; 4+ messages in thread
From: jsoe0708 @ 2002-01-23 6:53 UTC (permalink / raw)
To: Grant Grundler; +Cc: jsoe0708, parisc-linux, Hans.Witvliet
Quoting Grant Grundler <grundler@dsl2.external.hp.com>:
> jsoe0708@tiscali.be wrote:
> > Hi all,
> >
> > Just to relate an experience:
> >
...
> palo uses IODC ("BIOS") to load the vmlinux.
> That vmlinux does not know how to talk to the IDE CD-ROM interface
> and can't load anything else.
Ok I am ignoring this detail (sorry).
> One should be able to do a network
> install but start out by booting the ISO image.
>
> grant
>
Tanks for info,
Joel
PS: I would not be able to help to improve ide drivers (sorry)
-------------------------------------------------
This mail sent through Tiscalinet Webmail (http://webmail.tiscali.be)
^ permalink raw reply [flat|nested] 4+ messages in thread
* [parisc-linux] Re: [Re]: B2000
2002-01-23 6:53 ` jsoe0708
@ 2002-01-25 5:56 ` Grant Grundler
0 siblings, 0 replies; 4+ messages in thread
From: Grant Grundler @ 2002-01-25 5:56 UTC (permalink / raw)
To: jsoe0708; +Cc: parisc-linux
jsoe0708@tiscali.be wrote:
> PS: I would not be able to help to improve ide drivers (sorry)
Don't feel bad. In this case I wasn't either...at least not
to the point of a working IDE on suckyio. And I thought I could. :^(
grant
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2002-01-25 5:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-01-22 19:09 [parisc-linux] [Re]: B2000 jsoe0708
2002-01-23 2:07 ` [parisc-linux] " Grant Grundler
2002-01-23 6:53 ` jsoe0708
2002-01-25 5:56 ` Grant Grundler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox