Re: [parisc-linux] Printing problem with HP9000 712/80

Re: [parisc-linux] Printing problem with HP9000 712/80

[Vilmos Soti]

Hello,

Thanks all of you for the answers. Now at least I know that the unaligned
access message is normal and the harmony is full duplex.

About the printer.

This is a full-blown (not windows only) printer. I tried to connect
it to another Linux box, and I could print a pcl file by catting it to
/dev/lp0. I could also print a text file (/etc/passwd and an ^L at the
end) by sending it to /dev/lp0.

However, when I connect it to the HP9000 712/80 box, then nothing happens
even if I tried to cat the same pcl file to the printer port. I massaged
the connectors to make sure that there is no contact error. This is not
the case since the printer works perfectly on the two other boxes. On
the other hand, I do have an old Panasonic dot matrix printer, and if I
connect that printer to the box, and send a text file with an ^L at the
end, it does print. So now I am in the situation that the HP computer
doesn't talk to the HP printer but to the Panasonic one.

The printer has only one connector which seems proprietary, but the
other end of the end of the cable is parallel.

Thanks, Vilmos

Re: [parisc-linux] Printing problem with HP9000 712/80

[Grant Grundler]

On Thu, Jan 09, 2003 at 11:39:05PM -0800, Vilmos Soti wrote:
> So now I am in the situation that the HP computer
> doesn't talk to the HP printer but to the Panasonic one.

Vilmos,
You seem to assume the HPUX workstation division and the HP printer
division support parisc-linux. Unfortunately,that's not the case.

The parallel port HW in 712/80 is designed in early 1990s.
Is the 712/80 capable of talking to your printer?

Later parallel port standards support bidirectional data and
I'm not sure LASI chip properly supports that. Maybe someone
can clarify since I'd like to hook a Connectix Color Quickcam
to my B180. I know it works with my laptop but had problems
on the b180.

grant