[parisc-linux] cannot install (shellutils)

[parisc-linux] cannot install (shellutils)

[Jörg Benndorf]

[-- Attachment #1: Type: text/plain, Size: 522 bytes --]

When installing debian on a hp-9000 712/80 the below warning shows up:

"file:/instmnt/pool/main/s/shellutils/shellutils_2.0.11-11_hppa.deb was corrupt" <continue>
"Couldn't download shellutils" <continue>
"The previous attempt to install the base system failed. Please select "Next" to retry installation of the base system."

I got the install cd by downloading the iso image using jigdo.
I have tried version 3.0r0, 3.0r1 and 3.0r1NON-US but none of them works - always the same error message.

Any hints ?


[-- Attachment #2: Type: text/html, Size: 1181 bytes --]

RE: [parisc-linux] cannot install (shellutils)

[Joel Soete]

Hi Joerg,
>
>
>When installing debian on a hp-9000 712/80 the below warning shows up:
>
>"file:/instmnt/pool/main/s/shellutils/shellutils_2.0.11-11_hppa.deb was
corrupt"
><continue>
>"Couldn't download shellutils" <continue>
>"The previous attempt to install the base system failed. Please select "Next"
>to retry installation of the base system."
>
>I got the install cd by downloading the iso image using jigdo.
>I have tried version 3.0r0, 3.0r1 and 3.0r1NON-US but none of them works

Umm as I install successfuly 3.0r0 (and iirc in the list somebody else reach
to intall 3.0r1), I do suspect that the pb should be somewhere in the way
you proceded to burn your cdrom.

First of all, check the md5sum checksum of the image you download (very usefull
for big files).

If it is ok tell us more about tools you used to burn this image (I use cdrtools
on *nix system)

hth,
    Joel

---------------------------------
Vous surfez avec une ligne classique ?
Economisez jusqu'à 25% avec Tiscali Complete !
Offre spéciale : première année d'abonnement offerte.
... Plus d'info sur http://complete.tiscali.be

Re: [parisc-linux] cannot install (shellutils)

[Grant Grundler]

On Mon, Apr 28, 2003 at 02:40:40PM +0200, Joel Soete wrote:
> >I got the install cd by downloading the iso image using jigdo.

...
> First of all, check the md5sum checksum of the image you download (very
> usefull for big files).

I think jigdo already did.  IIRC jigdo verifies the final ISO image.

> If it is ok tell us more about tools you used to burn this image
> (I use cdrtools on *nix system)

The ISO seems to boot - therefore I'll guess it's something else.
But don't know where to begin without having the box in front of me.
Open the box and make sure everything is clean and all cables properly
connected. Reseat RAM (after grounding yourself). Try again.

grant

RE: [parisc-linux] cannot install (shellutils)

[joachim.weller]

Hi Joerg,

>>When installing debian on a hp-9000 712/80 the below warning shows up:
>>
>>"file:/instmnt/pool/main/s/shellutils/shellutils=5F2.0.11-11=5Fhppa.deb w=
as
corrupt"
>><continue>
>>"Couldn't download shellutils" <continue>

>Umm as I install successfuly 3.0r0 (and iirc in the list somebody else=20
reach
>to intall 3.0r1), I do suspect that the pb should be somewhere in the way
>you proceded to burn your cdrom.

>First of all, check the md5sum checksum of the image you download (very=20
usefull
>for big files).
If the downloaded image shows correct md5sum, I would recommend checking=20
your
burned CDROM for equal md5sum:
dd if=3D/dev/cdrom bs=3D8192|md5sum

change "/dev/cdrom" to your correct cdrom device and don't interrupt,
this may take considerable time without showing any activity, depending
on the drive speed.

Sometimes, not all cdrom raw discs are recognized well in all
drives. Changing manufacturer/type may help.

A way to prove that the cdrom drive in question reads your burned cdrom
correctly, might be to attach the drive to a (linux) pc with scsi IF and
run the same command there. Older drives tend to accumulate dust in the
optical path, wich might cause reading problems as well, and sometimes
are not well designed for modern cdrom raw material. Maybe you can
attach a more recent scsi drive to your hp-9000.
=20
hth,
      Joachim


Joachim Weller

Philips Medizin Systeme Boeblingen GmbH
Cardiac and Monitoring Systems (CMS) /New Product Engineering=20
Phone: {+49|0}-7031-463-1891
Fax:   {+49|0}-7031-463-2112
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F
Gesch=E4ftsf=FChrer: Dr. Werner Haas, David Russell, Wolfgang Strenzl=20
(Sprecher)
Sitz der Gesellschaft: B=F6blingen Registergericht B=F6blingen Reg.-Nr. HRB=
=20
5187=20
Hewlett-Packard Str. 2, D 71034 Boeblingen      -GERMANY-

RE: [parisc-linux] cannot install (shellutils)

[Joel Soete]

Hi Joachim,


>If the downloaded image shows correct md5sum, I would recommend checking
>
>your
>burned CDROM for equal md5sum:
>dd if=/dev/cdrom bs=8192|md5sum
>
Absolutly right, for my own I used :
readcd dev=1,4,0 f=- | md5sum

(replacing dev= by the relevant hw/path of your own cdrom)

Joel


---------------------------------
Vous surfez avec une ligne classique ?
Economisez jusqu'à 25% avec Tiscali Complete !
Offre spéciale : première année d'abonnement offerte.
... Plus d'info sur http://complete.tiscali.be

Re: [parisc-linux] cannot install (shellutils)

[Joel Soete]

Umm some mail pb?

>-- Original Message --
>Date: Tue, 29 Apr 2003 08:27:15 +0200
>From: "Joel Soete" <jsoe0708@tiscali.be>
>Subject: Re: [parisc-linux] cannot install (shellutils)
>To: "Grant Grundler" <grundler@parisc-linux.org>
>Cc: "J?rg Benndorf" <joerg.benndorf@t-online.de>,
> parisc-linux@lists.parisc-linux.org
>
>
>
>>
>>On Mon, Apr 28, 2003 at 02:40:40PM +0200, Joel Soete wrote:
>>> >I got the install cd by downloading the iso image using jigdo.
>>
>>...
>>> First of all, check the md5sum checksum of the image you download (very
>>> usefull for big files).
>>
>>I think jigdo already did.  IIRC jigdo verifies the final ISO image.
>
>I just know jigdo by name but do not have infrastructure to test (not enough
>disk space, fw allowing just a minimum of protocol)
>
>Hmm you also rightly point out that only speek about to check the image
and
>forgot to mentioned to check also the burned cd (just a priceless care :)
>)
>
>>
>>> If it is ok tell us more about tools you used to burn this image
>>> (I use cdrtools on *nix system)
>>
>>The ISO seems to boot - therefore I'll guess it's something else.
>
>Also but as we encounter many times this kind of pb because of cd wrongly
>burned I would just check step by step :)
> 
Joachim used dd but it could also used a tools coming with cdrtools:
readcd dev=1,4,0 f=- | md5sum

(for dev replaced your own cd hw/path)

>Joel
>


---------------------------------
Vous surfez avec une ligne classique ?
Economisez jusqu'à 25% avec Tiscali Complete !
Offre spéciale : première année d'abonnement offerte.
... Plus d'info sur http://complete.tiscali.be