[parisc-linux] 2.4.21-pa0 problems with ifconfig?

[parisc-linux] 2.4.21-pa0 problems with ifconfig?

[Alexander Gabert]

hi, has anyone of you experience problems with 2.4.21-pa0 and the
ifconfig command?

it heavily dumps when i boot this kernel on my C200.

thanks in advance,

Alex

Re: [parisc-linux] 2.4.21-pa0 problems with ifconfig?

[Grant Grundler]

On Mon, Jun 30, 2003 at 05:17:04PM +0200, Alexander Gabert wrote:
> hi, has anyone of you experience problems with 2.4.21-pa0 and the
> ifconfig command?

works for me (tm).

grundler@ios:~$ /sbin/ifconfig
eth0      Link encap:Ethernet  HWaddr 00:30:6E:03:79:9F  
          inet addr:192.168.0.20  Bcast:192.168.0.255
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2566 errors:1 dropped:0 overruns:0 frame:0
          TX packets:1499 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100 
          RX bytes:291959 (285.1 KiB)  TX bytes:523183 (510.9 KiB)
          Interrupt:128 Base address:0x6000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:560 (560.0 b)  TX bytes:560 (560.0 b)

grundler@ios:~$ uname -a
Linux ios 2.4.21-pa1 #5 Sun Jun 29 12:11:52 PDT 2003 parisc64 unknown unknown GNU/Linux

> it heavily dumps when i boot this kernel on my C200.

Can you send output?

grant

Re: [parisc-linux] 2.4.21-pa0 problems with ifconfig?

[Grant Grundler]

On Mon, Jun 30, 2003 at 07:11:25PM +0200, Alexander Gabert wrote:
> hi,
> 
> adam:/usr/src# uname -a
> Linux adam 2.4.18-32 #1 Sat Mar 30 18:26:22 MST 2002 parisc unknown
> adam:/usr/src# dmesg | grep tulip
> tulip0: no phy info, aborting mtable build
> tulip0:  MII transceiver #1 config 1000 status 782d advertising 0061.

This is missing the phy reset polling patch.
expected result.
See ftp://ftp.parisc-linux.org/patches/diff.tulip_media-02

> on a 2.4.20-pa35 with tulip driver compiled in statically:
> adam:/usr/src/working02-gentoo/linux-2.4.20-pa35# grep TULIP .config
> CONFIG_TULIP=y

2.4.20-pa35 tulip definitely works on both hppa and hppa64 kernels.
I use both (c3000 and A500). Something else is wrong.

Perhaps you've suffered some data corruption in a dynamic
lib that ifconfig uses? or ifconfig binary itself?

> ...
> ifconfig (pid 2769): Illegal instruction (code 8)
> 
>      YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
>      PSW: 00000000000001000000000000001111 Not tainted
>      r00-03  00000000 10348cd0 102041a0 100addc1
>      r04-07  100ad800 10348968 10348968 00000000
>      r08-11  2f2c994c 2efdc610 00000000 00008914
>      r12-15  00000000 ffff7000 faf00560 0003022c
>      r16-19  0003022c 0003022c 0003022c 000000ff
>      r20-23  000000ef 100addc5 102efc1c 0bebc200
>      r24-27  100addc5 000000ef 10348968 1030e010
>      r28-31  e0000000 00000001 2efdcd00 102041a0
>      sr0-3   00000000 00000000 00000000 000023b5
>      sr4-7   00000000 00000000 00000000 00000000

sorry - even though this is the right output, it's incomplete.
I need the IOAQ.

thanks,
grant