[parisc-linux] CD Boot in Graphic Mode.

[parisc-linux] CD Boot in Graphic Mode.

[William J. (Bill) Van Vliet]

I am trying to install Debian cd's on a D-Server. The
system does boot up and go through the boot process.
Then it switches into graphics mode and everything
goes down the tube. I am using a serial terminal that
doesn't do graphics. Obviously very new at this. Any
help would be very appreciated.

=====
William J. (Bill) Van Vliet
Omnetrix International, Inc.

http://www.omnetrix.com

Other email: wjvv@omxi.com

Re: [parisc-linux] 64 MB RAM for 3000 and 9000 seriesHP

[Chris Systems]

Sorry RISC people,

Have revisited my HP Ram collection was asked to provide serial numbers and
Ram type.

Sample serial numbers below

A56E00272649 Puerto Rico 3746
A2580-60001 64MB F-3517

70 sticks are available.

Not sure what they are worth but I am happy to Send anywhere.

I am in Brisbane Australia if you are interested they can be packed and sent
immediately

Yours

Chris Christie

1300 88 36 38
info@wias.net.au

Re: [parisc-linux] CD Boot in Graphic Mode.

[Thibaut VARENE]

-------------------
> On Mon, Jul 21, 2003 at 03:52:03PM -0700, William J. (Bill) Van
Vliet wrote:
> > I am trying to install Debian cd's on a D-Server. The
> > system does boot up and go through the boot process.
> > Then it switches into graphics mode and everything
> > goes down the tube. I am using a serial terminal that
> > doesn't do graphics. Obviously very new at this. Any
> > help would be very appreciated.
>=20
>=20
> Either my routing is foobar or google.com is really down again.
> try searching for "ttyB0" and "D220" (or "D200") on
> 	http://www.parisc-linux.org/mailing-lists/index.html
>=20
> grant

http://pateam.esiee.fr/doc.html is a good start point for newbies as
well ;)

Thibaut VARENE
PA/Linux ESIEE Team
http://pateam.esiee.fr/

Re: [parisc-linux] CD Boot in Graphic Mode.

[Grant Grundler]

On Mon, Jul 21, 2003 at 03:52:03PM -0700, William J. (Bill) Van Vliet wrote:
> I am trying to install Debian cd's on a D-Server. The
> system does boot up and go through the boot process.
> Then it switches into graphics mode and everything
> goes down the tube. I am using a serial terminal that
> doesn't do graphics. Obviously very new at this. Any
> help would be very appreciated.


Either my routing is foobar or google.com is really down again.
try searching for "ttyB0" and "D220" (or "D200") on
	http://www.parisc-linux.org/mailing-lists/index.html

grant