* [parisc-linux] Xfree on C3000 visualize
@ 2004-01-09 9:02 Matt Lewis
2004-01-09 9:43 ` Randolph Chung
0 siblings, 1 reply; 7+ messages in thread
From: Matt Lewis @ 2004-01-09 9:02 UTC (permalink / raw)
To: parisc-linux
[-- Attachment #1: Type: text/plain, Size: 177 bytes --]
ok, i've read the documentation, but i just want to clarify...
do the fx4 video cards work with this or not?
i managed (finally) to get it all installed
cheers, matt
[-- Attachment #2: Type: text/html, Size: 671 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [parisc-linux] Xfree on C3000 visualize
2004-01-09 9:49 ` Randolph Chung
@ 2004-01-09 9:23 ` Matt Lewis
2004-01-09 9:29 ` Matt Lewis
2004-01-09 12:32 ` Alan Cox
2 siblings, 0 replies; 7+ messages in thread
From: Matt Lewis @ 2004-01-09 9:23 UTC (permalink / raw)
To: parisc-linux
[-- Attachment #1: Type: text/plain, Size: 947 bytes --]
oops sorry about that randolph, using outlook atm :)
thanks, i'll have a look on ebay...
----- Original Message -----
From: Randolph Chung
To: Matt Lewis
Cc: parisc-linux@lists.parisc-linux.org
Sent: Friday, January 09, 2004 7:49 PM
Subject: Re: [parisc-linux] Xfree on C3000 visualize
In reference to a message from Matt Lewis, dated Jan 09:
> ah crap..
>
> ok then, can i use my normal TNT2 then?
(please reply on the list)
In general x86 video cards do not work because they have bios that need
to run x86 code (that's my understanding anyway). this has been
discussed several times on the list. there's an additional problem
which is that some pa firmware refuses to boot with non-HP gfx cards.
Your best bet is to get a PCI Vis-EG card which do work quite well.
randolph
--
Randolph Chung
Debian GNU/Linux Developer, hppa/ia64 ports
http://www.tausq.org/
[-- Attachment #2: Type: text/html, Size: 2113 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [parisc-linux] Xfree on C3000 visualize
2004-01-09 9:49 ` Randolph Chung
2004-01-09 9:23 ` Matt Lewis
@ 2004-01-09 9:29 ` Matt Lewis
2004-01-09 20:30 ` Grant Grundler
2004-01-09 12:32 ` Alan Cox
2 siblings, 1 reply; 7+ messages in thread
From: Matt Lewis @ 2004-01-09 9:29 UTC (permalink / raw)
To: parisc-linux
[-- Attachment #1: Type: text/plain, Size: 968 bytes --]
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=3070354300&category=11221
is that one that would work?
----- Original Message -----
From: Randolph Chung
To: Matt Lewis
Cc: parisc-linux@lists.parisc-linux.org
Sent: Friday, January 09, 2004 7:49 PM
Subject: Re: [parisc-linux] Xfree on C3000 visualize
In reference to a message from Matt Lewis, dated Jan 09:
> ah crap..
>
> ok then, can i use my normal TNT2 then?
(please reply on the list)
In general x86 video cards do not work because they have bios that need
to run x86 code (that's my understanding anyway). this has been
discussed several times on the list. there's an additional problem
which is that some pa firmware refuses to boot with non-HP gfx cards.
Your best bet is to get a PCI Vis-EG card which do work quite well.
randolph
--
Randolph Chung
Debian GNU/Linux Developer, hppa/ia64 ports
http://www.tausq.org/
[-- Attachment #2: Type: text/html, Size: 2269 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [parisc-linux] Xfree on C3000 visualize
2004-01-09 9:02 [parisc-linux] Xfree on C3000 visualize Matt Lewis
@ 2004-01-09 9:43 ` Randolph Chung
[not found] ` <001701c3d691$4ca17ec0$0101a8c0@nitephyre>
0 siblings, 1 reply; 7+ messages in thread
From: Randolph Chung @ 2004-01-09 9:43 UTC (permalink / raw)
To: Matt Lewis; +Cc: parisc-linux
> do the fx4 video cards work with this or not?
No.
randolph
--
Randolph Chung
Debian GNU/Linux Developer, hppa/ia64 ports
http://www.tausq.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [parisc-linux] Xfree on C3000 visualize
[not found] ` <001701c3d691$4ca17ec0$0101a8c0@nitephyre>
@ 2004-01-09 9:49 ` Randolph Chung
2004-01-09 9:23 ` Matt Lewis
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Randolph Chung @ 2004-01-09 9:49 UTC (permalink / raw)
To: Matt Lewis; +Cc: parisc-linux
In reference to a message from Matt Lewis, dated Jan 09:
> ah crap..
>
> ok then, can i use my normal TNT2 then?
(please reply on the list)
In general x86 video cards do not work because they have bios that need
to run x86 code (that's my understanding anyway). this has been
discussed several times on the list. there's an additional problem
which is that some pa firmware refuses to boot with non-HP gfx cards.
Your best bet is to get a PCI Vis-EG card which do work quite well.
randolph
--
Randolph Chung
Debian GNU/Linux Developer, hppa/ia64 ports
http://www.tausq.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [parisc-linux] Xfree on C3000 visualize
2004-01-09 9:49 ` Randolph Chung
2004-01-09 9:23 ` Matt Lewis
2004-01-09 9:29 ` Matt Lewis
@ 2004-01-09 12:32 ` Alan Cox
2 siblings, 0 replies; 7+ messages in thread
From: Alan Cox @ 2004-01-09 12:32 UTC (permalink / raw)
To: Randolph Chung; +Cc: Matt Lewis, parisc-linux
On Gwe, 2004-01-09 at 09:49, Randolph Chung wrote:
> In general x86 video cards do not work because they have bios that need
> to run x86 code (that's my understanding anyway). this has been
> discussed several times on the list. there's an additional problem
> which is that some pa firmware refuses to boot with non-HP gfx cards.
X has an emulator for this, and we do actually know how to init a tnt2
card (see the rivafb code for some of it). Your Tnt2 might actually
work, you never know 8)
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [parisc-linux] Xfree on C3000 visualize
2004-01-09 9:29 ` Matt Lewis
@ 2004-01-09 20:30 ` Grant Grundler
0 siblings, 0 replies; 7+ messages in thread
From: Grant Grundler @ 2004-01-09 20:30 UTC (permalink / raw)
To: Matt Lewis; +Cc: parisc-linux
On Fri, Jan 09, 2004 at 07:29:45PM +1000, Matt Lewis wrote:
> http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=3070354300&category=11221
>
> is that one that would work?
no.
You c3k only has PCI slots in it.
Search the parisc-linux mail archive (lists.parisc-linux.org)
for references to Vis-EG and a part number will surely pop up.
grant
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2004-01-09 20:30 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-01-09 9:02 [parisc-linux] Xfree on C3000 visualize Matt Lewis
2004-01-09 9:43 ` Randolph Chung
[not found] ` <001701c3d691$4ca17ec0$0101a8c0@nitephyre>
2004-01-09 9:49 ` Randolph Chung
2004-01-09 9:23 ` Matt Lewis
2004-01-09 9:29 ` Matt Lewis
2004-01-09 20:30 ` Grant Grundler
2004-01-09 12:32 ` Alan Cox
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox