Linux PARISC architecture development
 help / color / mirror / Atom feed
* [parisc-linux] Troubles with console on HP9000 rp3440
@ 2004-10-27 13:22 Dimitar Atanasov
  2004-10-27 19:57 ` Grant Grundler
  0 siblings, 1 reply; 2+ messages in thread
From: Dimitar Atanasov @ 2004-10-27 13:22 UTC (permalink / raw)
  To: parisc-linux

Hello Pa-Risc!
I try to install linux on HP 9000 rp 3440. I connect to console over null
modem cable, and I start the install from the boot cd. But I lost the
output. The installation says that the output is on ttyS0 but I can't find
it. I search all com ports and other consoles but I didn't see anything
anywhere.
Please help if you have any ideas.
I have read the manual but I have no such things on my console commands, or
may be I didn't understand the procedure.



Regards,
Dimitar Atanasov
NEK EAD.



_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [parisc-linux] Troubles with console on HP9000 rp3440
  2004-10-27 13:22 [parisc-linux] Troubles with console on HP9000 rp3440 Dimitar Atanasov
@ 2004-10-27 19:57 ` Grant Grundler
  0 siblings, 0 replies; 2+ messages in thread
From: Grant Grundler @ 2004-10-27 19:57 UTC (permalink / raw)
  To: Dimitar Atanasov; +Cc: parisc-linux

On Wed, Oct 27, 2004 at 04:22:34PM +0300, Dimitar Atanasov wrote:
> Hello Pa-Risc!
> I try to install linux on HP 9000 rp 3440.

Support for pa8800 machines isn't fully functional yet.
"make -j2" segfaults withing a minute or so. I haven't tried
again recently.
Unless you intend on debugging TLB/Cache probles, it's best
to stick with HPUX for now.

>  I connect to console over null
> modem cable, and I start the install from the boot cd.

Which boot cd? Where did it come from?

The only installer that has a chance of working is if
debian-installer uses a recent 2.6 kernel (since May, 2004) *or* has
the pa8800/ZX1 chipset support backported to 2.4 kernel.

hth,
grant

>  But I lost the
> output. The installation says that the output is on ttyS0 but I can't find
> it. I search all com ports and other consoles but I didn't see anything
> anywhere.
> Please help if you have any ideas.
> I have read the manual but I have no such things on my console commands, or
> may be I didn't understand the procedure.
> 
> 
> 
> Regards,
> Dimitar Atanasov
> NEK EAD.
> 
> 
> 
> _______________________________________________
> parisc-linux mailing list
> parisc-linux@lists.parisc-linux.org
> http://lists.parisc-linux.org/mailman/listinfo/parisc-linux
_______________________________________________
parisc-linux mailing list
parisc-linux@lists.parisc-linux.org
http://lists.parisc-linux.org/mailman/listinfo/parisc-linux

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2004-10-27 19:57 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-10-27 13:22 [parisc-linux] Troubles with console on HP9000 rp3440 Dimitar Atanasov
2004-10-27 19:57 ` Grant Grundler

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox