[parisc-linux] pre-build HP-UX/10.20 bash's problem

[parisc-linux] pre-build HP-UX/10.20 bash's problem

[yuqian]

Hi.
I have a HP B2000 (9000/785) with HP-UX 10.20 and installed 
binaries/HP-UX/depot/10.20/bash-2.03-1.hpux-10.20.depot.gz,
but it not work when I want to build a new kernel:
   bash-2.03$ make dep
   scripts/mkdep init/*.c > .depend
   scripts/mkdep `find /home/yq/linux/include/asm
/home/yq/linux/include/linux /home/yq/linux/include/scsi
/home/yq/linux/include/net -name   SCCS -prune -o -follow -name \*.h ! -name
modversions.h -print` > .hdepend
   bash: scripts/mkdep: Arg list too long
   make: *** [dep-files] Error 126
  
Am I missing any thing?
Thanks for any advices.

Re: [parisc-linux] pre-build HP-UX/10.20 bash's problem

[Bruno Vidal]

	Hi
The answer is in your kernel. Rebuild the hpux kernel
after modifying the parameter:
ncargs_enable = 1
(I don't remember exactly the parameter name but it
must be this one). It will let you access 24kb for
arg list, without this modification the size for
arg is only 2k. This parameter is adding by PHKL_16751.

	Bye.

-- 
	Vidal Bruno, (770-4271)
        SSD-HA Team, HP-UX & LINUX Support
	bruno_vidal@admin.france.hp.com

Re: [parisc-linux] pre-build HP-UX/10.20 bash's problem

[Bruno Vidal]

	Hi
I've retrieve the kernel parameter:
large_ncargs_enabled
Put this one to 1 and it would be fine.

	Bye.
yuqian wrote:
> 
> Hi.
> I have a HP B2000 (9000/785) with HP-UX 10.20 and installed
> binaries/HP-UX/depot/10.20/bash-2.03-1.hpux-10.20.depot.gz,
> but it not work when I want to build a new kernel:
>    bash-2.03$ make dep
>    scripts/mkdep init/*.c > .depend
>    scripts/mkdep `find /home/yq/linux/include/asm
> /home/yq/linux/include/linux /home/yq/linux/include/scsi
> /home/yq/linux/include/net -name   SCCS -prune -o -follow -name \*.h ! -name
> modversions.h -print` > .hdepend
>    bash: scripts/mkdep: Arg list too long
>    make: *** [dep-files] Error 126
> 
> Am I missing any thing?
> Thanks for any advices.
> 
> ---------------------------------------------------------------------------
> To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com with
> `unsubscribe' as the subject.

-- 
	Vidal Bruno, (770-4271)
        SSD-HA Team, HP-UX & LINUX Support
	bruno_vidal@admin.france.hp.com

Re: [parisc-linux] pre-build HP-UX/10.20 bash's problem

[John David Anglin]

> Hi.
> I have a HP B2000 (9000/785) with HP-UX 10.20 and installed 
> binaries/HP-UX/depot/10.20/bash-2.03-1.hpux-10.20.depot.gz,
> but it not work when I want to build a new kernel:
>    bash-2.03$ make dep
>    scripts/mkdep init/*.c > .depend
>    scripts/mkdep `find /home/yq/linux/include/asm
> /home/yq/linux/include/linux /home/yq/linux/include/scsi
> /home/yq/linux/include/net -name   SCCS -prune -o -follow -name \*.h ! -name
> modversions.h -print` > .hdepend
>    bash: scripts/mkdep: Arg list too long
>    make: *** [dep-files] Error 126
>   
> Am I missing any thing?
> Thanks for any advices.

I think this can be fixed by changing the Makefile to use relative paths
instead of absolute paths.  This shortens the arg list enough for 
building under hpux.

Changing the kernel to support a larger arg and environment space looks
like it will waste a lot of memory for most applications and thus may
not be suited for machines with limited memory or swap space.  So, I would
try hacking the Makefile first.

Dave
-- 
J. David Anglin                                  dave.anglin@nrc.ca
National Research Council of Canada              (613) 990-0752 (FAX: 952-6605)

Re: [parisc-linux] pre-build HP-UX/10.20 bash's problem

[yuqian]

The problem resolved after rebuild hpux kernel with large_ncargs_enabled=1.
Thanks all.