[parisc-linux] Sorry

[parisc-linux] Sorry

[Thomas Marteaut]

Hi all,

	I am sorry for the last message. It should have been an internal mail
(That's why it's in French). I am also sorry
for the attached files. Nevertheless, we are dealing with the new source
and we are looking at how do B132 and 712 boot.
So,

sti+frame shows the dmesg of 712 for our kernel that supports STI
console and framebuffer. That's why we have two searches for sti memory
space but they are different!
Helge, you can notice that now, on our 712, led DISPLAY is at
0x00000000! 

sti+frame_B132 shows the dmesg for the same kernel but with a B132+
workstation.

And the RTC does print Cannot access the Hardware Clock via any method
on both machines!

	Again, I am sincerely sorry for the message but I hope this one will
help...

Bye, Thomas
ESIEE Team

Re: [parisc-linux] Sorry

[Grant Grundler]

Thomas Marteaut wrote:
> Hi all,
> 
> 	I am sorry for the last message.

np. You followed up with an explanation in english.

> Helge, you can notice that now, on our 712, led DISPLAY is at
> 0x00000000! 

Could be a hint the 712 has no external LED's?


> And the RTC does print Cannot access the Hardware Clock via any method
> on both machines!

"RTC" here is hwclock program.
Is CONFIG_GENRTC enabled?
It is by default for 32-bit kernels but not yet for 64-bit.

grant

Grant Grundler
Unix Systems Enablement Lab
+1.408.447.7253