* [parisc-linux] FW: hp_boot.log
@ 2000-12-08 10:34 Witvliet, Hans
2000-12-08 16:33 ` Andreas Thienemann
0 siblings, 1 reply; 4+ messages in thread
From: Witvliet, Hans @ 2000-12-08 10:34 UTC (permalink / raw)
To: 'parisc-linux@thepuffingroup.com'; +Cc: 'thuis'
Hi all,
I had the impression that the C110 was supported, however when booting from
cd (from palinux.05.iso) i got following results:
Although i think the cd is ok, it might be a good idea to provide the
md5sums as well.....
TIA,
Hans
> Firmware Version 1.3
>
> Duplex Console IO Dependent Code (IODC) revision 0
>
> --------------------------------------------------------------------------
> ----
> (c) Copyright 1990-1996, Hewlett-Packard Company, All rights reserved
> --------------------------------------------------------------------------
> ----
>
> Processor Speed State CoProcessor State Cache
> Size
> --------- -------- --------------------- -----------------
> ----------
>
> 0 120 Mhz Active Functional 256 KB
>
> Central Bus Speed (in mhz) : 120
> Available Memory (bytes) : 536866816
> Good Memory Required (bytes): 48549888
>
>
> Primary boot path: core.FWSCSI.6.0
> Alternate boot path: core.SCSI.6.0
> Console path: GRAPHICS3
> Keyboard path: core.PS2
>
> CPU 0
> WARNING: Memory has been initialized, but not tested as a result of
> FASTBOOT being enabled. To test memory, disable FASTBOOT
> and reboot system
>
>
> Processor is booting from first available device.
>
> To discontinue, press any key within 10 seconds.
>
> \aBoot terminated.
>
>
> ------- Main Menu
> -------------------------------------------------------------
>
> Command Description
> ------- -----------
>
> BOot [PRI|ALT|<path>] Boot from specified path
> PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
> SEArch [DIsplay|IPL] [<path>] Search for boot devices
>
> COnfiguration menu Displays or sets boot values
> INformation menu Displays hardware information
> SERvice menu Displays service commands
>
> DIsplay Redisplay the current menu
> HElp [<menu>|<command>] Display help for menu or command
> RESET Restart the system
> -------
> Main Menu: Enter command or menu > sea
>
> Searching for potential boot device(s)
> This may take several minutes.
>
> To discontinue search, press any key (termination may not be immediate).
>
>
> Path Number Device Path Device Type
> --------------------------------------------------------------------------
> -
> P0 core.FWSCSI.6.0 SEAGATE ST32272WD
>
> P1 core.FWSCSI.5.0 SEAGATE ST34572WD
>
> P2 core.SCSI.2.0 TOSHIBA CD-ROM XM-5701TA
>
>
>
> Main Menu: Enter command or menu > boot p2
> Interact with IPL (Y or N)?> n
>
> Booting...
> Boot IO Dependent Code (IODC) revision 0
>
>
> HARD Booted.
> palo ipl bame@noam Tue Oct 31 14:18:02 MST 2000
> 0/vmlinux 2140145 bytes @ 0x6f9800
> 0/palo-cmdline '0/vmlinux ROOT=/ TERM=LINUX root=/dev/scd0'
> Kernel: partition 0 file /vmlinux
> ELF32 executable
>
> Entry 00100150 first 00100000 n 4
> Segment 0 load 00100000 size 1460344 mediaptr 0x1000
> Segment 1 load 00266000 size 179048 mediaptr 0x166000
> Segment 2 load 00294000 size 109876 mediaptr 0x192000
> Segment 3 load 002b0000 size 8192 mediaptr 0x1ad000
> branching to kernel entry point 0x00100150
> Set default PSW W bit to 0
> PDC Console Initialized
> The 32-bit Kernel has started...
> Enabled FP coprocessor
> Free memory starts at: 0xc02da000
> (0x504d6c,0x504d6c,0x0,0x0)
> PALO command line: 'ROOT=/ TERM=LINUX root=/dev/scd0'
> PALO initrd 0-0
> model 000058e0 00000481 00000000 00000002 777b7670 100000f1 00000004
> 0000008a 0000008a
> vers 0000000d
> cpuid 0000016d
> CPUID vers 11 rev 13
> Searching for devices in PDC firmware... processor hpa 0xfffa0000
> a newer box...
> Found devices:
> 1. Raven T' GSC Core Graphics (10) at 0xf4000000, versions 0x32, 0x0,
> 0x85, 0x0, 0x0
> 2. SkyHawk 100/120 FW-SCSI (4) at 0xf3f8c000, versions 0x1f, 0x0, 0x89,
> 0x0, 0x80
> 3. U2-IOA BC GSC+ Port (7) at 0xf3fbf000, versions 0x501, 0x1, 0xc, 0x0,
> 0x0
> 4. Raven T' Core BA (11) at 0xffd00000, versions 0x32, 0x0, 0x81, 0x0, 0x0
> 5. Raven T' Lasi Core RS-232 (10) at 0xffd05000, versions 0x32, 0x0, 0x8c,
> 0x0, 0x0
> 6. Raven T' Core SCSI (10) at 0xffd06000, versions 0x32, 0x0, 0x82, 0x0,
> 0x0
> 7. Raven T' Core LAN (802.3) (10) at 0xffd07000, versions 0x32, 0x0, 0x8a,
> 0x0, 0x0
> 8. Raven T' Core Centronics (10) at 0xffd02000, versions 0x32, 0x0, 0x74,
> 0x0, 0x0
> 9. Raven T' Core PC Floppy (10) at 0xffd0a000, versions 0x32, 0x0, 0x83,
> 0x0, 0x0
> 10. Raven T' Audio (10) at 0xffd04000, versions 0x32, 0x0, 0x7b, 0x0, 0x0
> 11. Raven T' Core PC Keyboard (10) at 0xffd08000, versions 0x32, 0x0,
> 0x84, 0x0, 0x0
> 12. Raven T' Core PC Keyboard (10) at 0xffd08100, versions 0x32, 0x0,
> 0x84, 0x0, 0x0
> 13. Raven T' Wax BA (11) at 0xffe00000, versions 0x1e, 0x0, 0x8e, 0x0, 0x0
> 14. Raven T' Wax EISA BA (11) at 0xfc000000, versions 0x1e, 0x0, 0x90,
> 0x0, 0x0
> 15. Raven T' Wax RS-232 (10) at 0xffe02000, versions 0x1e, 0x0, 0x8c, 0x0,
> 0x80
> 16. Raven T' Wax HIL (10) at 0xffe01000, versions 0x1e, 0x0, 0x73, 0x0,
> 0x0
> That's a total of 16 devices.
> No CPUs reported by firmware - probing...
> Found CPU at fffa0000
> CPU(s): 1 x PA7200 (PCX-T') at 120.000000 MHz
> Linux version 2.4.0-test6 (pjlahaie@elenuial.thepuffingroup.com) (gcc
> version 2.96 20000925 (experimental)) #32 Mon Nov 6 10:20:58 EST 2000
> free_bootmem(0x2de000, 0x1fd22000)
> initrd: 00000000-00000000
> pagetable_init
> On node 0 totalpages: 131072
> zone(0): 65536 pages.
> zone(1): 65536 pages.
> zone(2): 0 pages.
> Kernel command line: ROOT=/ TERM=LINUX root=/dev/scd0
> trap_init
> Calibrating delay loop... 119.60 BogoMIPS
> Memory: 511600k available
> Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> POSIX conformance testing by UNIFIX
> Lasi version 0 at 0xffd00000 found.
>
> Dumping Stack from dfff0000 to dfff0a80:
> 0000 00000000 00000040 00000000 00000000 c027a46c 00000000 00000000
> ffffffff
> 0020 00000004 00000000 00000000 00000000 00000000 00000000 ffffffff
> c027a384
> 0040 c027a384 c02b0000 c02b0000 c028060c 00000000 00000000 00000000
> 00000000
> 0060 00000000 00000000 00000001 00000000 00000000 00000000 00000000
> c02b0000
> 0080 c02b0000 00000000 00000000 00000000 00000000 c02c9ab8 00000000
> dfff009c
> 00a0 dfff009c dfff00a4 c011a6e4 00000000 00000000 00000000 00000000
> 00000000
> 00c0 00000000 00000000 00000000 00000000 00000000 00000000 dfff0000
> c011d4a8
> 00e0 00000000 00000001 00000000 00000000 00000042 00000000 00000043
> 00000000
> 0100 00000000 00000000 00000000 00000000 00000000 80000000 00000000
> 00000000
> 0120 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 00000000
> 0140 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 00000000
> 0160 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 00000000
> 0180 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 00000000
> 01a0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> fffffeff
> 01c0 00000000 ffffffff 00000000 c027afb4 ffffffff ffffffff ffffffff
> ffffffff
> 01e0 ffffffff ffffffff 00800000 05000000 00000000 ffffffff ffffffff
> ffffffff
> 0200 00002000 00002000 00000400 00000400 ffffffff ffffffff ffffffff
> ffffffff
> 0220 00007377 61707065 72000000 00000000 00000000 00000000 00000000
> 00000000
> 0240 00000000 00000000 00020000 c0267054 c0267054 c013d1e8 00040000
> dfffeba0
> 0260 c02238c4 c0236708 c02d9800 00504d6c 00000000 c011bb88 c0267000
> 00020000
> 0280 c0267054 c0267000 0000003e c027a000 00000001 c02b61eb 00000004
> c02b61c7
> 02a0 00000023 c02b61eb 00000000 00000000 c0100290 0000003e 00000000
> 00000024
> 02c0 0000000b c027a4ac c027a000 f00000ac f00000a4 000000ff ffd05800
> ffd05800
> 02e0 ffd05800 00000060 ffffffff ffd05800 002b50c0 c0266000 00000000
> 00000000
> 0300 c02b08c0 00000000 000b0800 00000000 0450060a efdbdf3f 00000000
> fa7fcda2
> 0320 fffffffe 4374efc9 00000000 00000000 00000000 00000000 fffffffe
> 92b2dbaf
> 0340 ffffffff fde3de77 fffffffe 75fb7f5b fffffffe fa9f5fff fffffffe
> ff73bb77
> 0360 00000000 00000000 fffffffe 92f6ec6f fffffffe dffdffab fffffffe
> 5d5bdfaf
> 0380 fffffffe fbe3ebf7 fffffffe 6d735faa fffffffe 4ef1bffb fffffffe
> 17229d7e
> 03a0 fffffffe e5fddfaf d3f3aede a6d6f5fb f7dfdfff ffefffdd 7bd82bfe
> fccf39df
> 03c0 afeffdee d7978797 a3fbedff 7fe5de95 8ffbbefd fddbfffb bfdeffd7
> 78f75f3b
> 03e0 6fbcff3b 70eff7c9 e8ffbfbe faeeff9e eff9c5bf f743cfbf 77fcf7be
> bbffc2e9
> 0400 7d6ffdff fbbef7ef 00000000 00000000 dfff0500 c0103c38 00000000
> 00000000
> 0420 00000000 00000000 00000000 00000000 c011bb78 c011bb7c 7bd82bfe
> fccf39df
> 0440 00281000 00000000 c0280040 c0280064 00000000 c0280204 00000000
> 00000000
> 0460 00000000 00000000 00000000 dfff0468 00000000 00000000 00000000
> 00000000
> 0480 00000000 00000000 ef492a6b dee4e185 bdbf7659 7b0859e1 f610b3c2
> ec57d2d7
> 04a0 d8d910fd b1c494a9 63ff9c01 c7ff3802 8f88c557 1f673ffd 3ece7ffa
> 7d9cfff4
> 04c0 fb39ffe8 f6054a83 ec7c2055 d88ef5f9 b16b5ea1 62a00811 c5401022
> 8af69517
> 04e0 159b9f7d 2b373efa 566e7df4 c0103c48 59cf4283 b39e8506 674bbf5f
> ce977ebe
> 0500 dfff0000 c028060c 00000000 eb189434 d6479d3b acf98f25 5985ab19
> b30b5632
> 0520 66601937 ccc0326e 99f6d18f c01002a4 67362c9a ce6c5934 9cae073b
> 392abb25
> 0540 7255764a e4aaec94 c9236c7b 92306da5 c02b06c0 dfff0000 c028060c
> 00000000
> 0560 c02b0000 8317166c 0658998b 0cb13316 1962662c 32c4cc58 658998b0
> cb133160
> 0580 9650d793 2cd71a75 59ae34ea b35c69d4 66ce66fb cd9ccdf6 9b4f2ebf
> 36e8e82d
> 05a0 6dd1d05a dba3a0b4 b731f43b c0295054 dc2aba4a b823c1c7 703136dd
> e0626dba
> 05c0 c02b0000 8112691d 02526769 04a4ced2 09499da4 12933b48 dfffd140
> 4a4ced20
> 05e0 9499da40 294501d3 528a03a6 c02a5f74 4a5ebbcb 94bd7796 290c5a7f
> 5218b4fe
> 0600 c02d9800 00504d6c c025636c c0266000 c02c8000 00000000 c028d748
> 029f9556
> 0620 053f2aac 0a7e5558 14fcaab0 c02a67c8 53f2aac0 a7e55580 4fbc1e53
> 9f783ca6
> 0640 c02cc000 c0266000 c02c8000 00000000 c028d748 dfffec20 a347a7e1
> 46f9fa91
> 0660 8df3f522 1b915f17 3722be2e c0153e78 dc8af8b8 b9634423 72b03d15
> e5607a2a
> 0680 dffef8ac dffef860 c02c8000 00000000 00000000 c027a6cc dffef7e0
> 00000000
> 06a0 93ee3a7e 27aac1af 4f55835e c0109e74 3d20b82b 7a417056 f482e0ac
> e973740b
> 06c0 d2905d45 a5560fd9 fffa0000 00000002 00000022 dffef160 00000003
> c02ae994
> 06e0 c02c8d00 622fbaff c45f75fe c01536e0 11e6080d 23cc101a 47982034
> 8f304068
> 0700 dffef82c 0000416d c0230d0c dfffb1e0 ffd00000 00000000 c0256ba8
> c0256bb0
> 0720 13dcc342 27b98684 4f730d08 c02a6948 3dba8173 7b7502e6 f6ea05cc
> eda2becb
> 0740 c02c8d00 00000000 dfffb1e0 c02ae994 dfffb1e0 00000000 00000001
> 0000004d
> 0760 00000000 000000bf c0295794 c01dc40c 00504d6c c02c8800 c026c000
> c02c8d00
> 0780 c02ae994 dfffb1e0 c025f904 dfffb1e0 00000012 000081a4 c0256bd0
> 00000000
> 07a0 13f40217 27e8042e 4fd0085c c01dd02c 3f369423 7e6d2846 fcda508c
> f9c2144b
> 07c0 c02c8800 c026c000 c027a000 dfffb1e0 dfffa200 dfffb1e0 dfffb1e0
> c02b61ee
> 07e0 00000000 00000001 c027a000 0000003e 0000003c 00000027 0000000b
> c027a4ac
> 0800 c027a000 f00000ac f00000a4 000000ff ffd05800 ffd05800 ffd05800
> 00000060
> 0820 ffffffff ffd05800 002b50c0 c011e9bc 00000000 00000000 dfff0a00
> 00000000
> 0840 0004000b c0221800 c011e9f8 dfffa220 dfffa200 c0256a3c 00000014
> ffd00000
> 0860 00504d6c c02d9800 c0295794 000000bf 00000000 0000004d 00000001
> 00000000
> 0880 f00010f4 f00000ac f00000a4 ffdfffff dfffa218 ffd00013 ffd00000
> 0000000b
> 08a0 ffffffff dfffa220 dfffa200 c0266000 1749bb45 00000040 dfff0a80
> c012dfc0
> 08c0 000b0800 00000000 0450060a efdbdf3f 00000000 fa7fcda2 fffffffe
> 4374efc9
> 08e0 00000000 00000000 00000000 00000000 fffffffe 92b2dbaf ffffffff
> fde3de77
> 0900 fffffffe 75fb7f5b fffffffe fa9f5fff fffffffe ff73bb77 00000000
> 00000000
> 0920 fffffffe 92f6ec6f fffffffe dffdffab fffffffe 5d5bdfaf fffffffe
> fbe3ebf7
> 0940 fffffffe 6d735faa fffffffe 4ef1bffb fffffffe 17229d7e fffffffe
> e5fddfaf
> 0960 d3f3aede a6d6f5fb f7dfdfff ffefffdd 7bd82bfe fccf39df afeffdee
> d7978797
> 0980 a3fbedff 7fe5de95 8ffbbefd fddbfffb bfdeffd7 78f75f3b 6fbcff3b
> 70eff7c9
> 09a0 e8ffbfbe faeeff9e eff9c5bf f743cfbf 77fcf7be bbffc2e9 7d6ffdff
> fbbef7ef
> 09c0 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> 00000000
> 09e0 00000000 00000000 c011e710 c011e714 233e60d9 467cc1b2 8cf98364
> 1985b39b
> 0a00 00000000 0000003e c027a000 00000001 00000002 0f881093 00000000
> 1749bb49
> 0a20 c02b61ee 00000000 09045a94 1208b528 24116a50 4822d4a0 9045a940
> 20fde7d3
> 0a40 41fbcfa6 83f79f4c 07998bcb 0f331796 1e662f2c 3ccc5e58 7998bcb0
> f3317960
> 0a60 e6144793 cc5e3a75 98cac1b9 c0104c60 63c66c42 c78cd884 8f6f045b
> 1ea8bde5
>
> Kernel Fault: Code=15 regs=dfff0840 (Addr=1749bb49)
>
> YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
> PSW: 00000000000001000000000000001011
> r0-3 00000000 c0221800 c011e9f8 dfffa220
> r4-7 dfffa200 c0256a3c 00000014 ffd00000
> r8-11 00504d6c c02d9800 c0295794 000000bf
> r12-15 00000000 0000004d 00000001 00000000
> r16-19 f00010f4 f00000ac f00000a4 ffdfffff
> r20-23 dfffa218 ffd00013 ffd00000 0000000b
> r24-27 ffffffff dfffa220 dfffa200 c0266000
> r28-31 1749bb45 00000040 dfff0a80 c012dfc0
> sr0-4 00000000 00000000 00000000 00000000
> sr4-8 00000000 00000000 00000000 00000000
>
> IASQ: 00000000 00000000 IAOQ: c011e710 c011e714
> IIR: 0f881093 ISR: 00000000 IOR: 1749bb49
> ORIG_R28: 0000003e
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [parisc-linux] FW: hp_boot.log
2000-12-08 10:34 [parisc-linux] FW: hp_boot.log Witvliet, Hans
@ 2000-12-08 16:33 ` Andreas Thienemann
0 siblings, 0 replies; 4+ messages in thread
From: Andreas Thienemann @ 2000-12-08 16:33 UTC (permalink / raw)
To: Witvliet, Hans; +Cc: 'parisc-linux@thepuffingroup.com', 'thuis'
Hi Hans,
"Witvliet, Hans" wrote:
> I had the impression that the C110 was supported, however when booting from
> cd (from palinux.05.iso) i got following results:
Interesting.
This does resemble the crash I'm experiencing on my D250.
The Kernel boots, finds some Hardware and than dumps stack. Somewhere after
the message "Posix Conformance tested".
The following is from my fault message:
---
Data access rights fault in kernel: Code=26 regs=c7f9c7c0 (Addr=00000004)
YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
PSW: 00000000000001000000000000001011
r0-3 00000000 c0291800 c02712ec 00000000
r4-7 c7ffc400 ffffffff c01c3870 c025d800
r8-11 c0292800 000000f0 00000000 000000ff
r12-15 000000f2 000000fa 000000fd f0100000
r16-19 f0001180 f0000070 f0000068 00000000
r20-23 c7f9c74e 00000002 c0271574 ffd07000
r24-27 c7f9c750 00000f20 00000000 c023a000
r28-31 00000001 00000000 c7f9ca00 0027b9b8
sr0-4 00000000 00000000 00000000 00000000
sr4-8 00000000 00000000 00000000 00000000
IASQ: 00000000 00000000 IAOQ: c0271308 c027130c
IIR: 0e681096 ISR: 00000000 IOR: 00000004
ORIG_R28: 000000fd
---
I guess it has something to do with the "i82596_probe".
Could you do a lookup of the IAOQ Register to see if it is the same?
Get the "build-tools" from the CVs, and use the "a" program to lookup the
symbol in your system-map.
bye,
andreas
^ permalink raw reply [flat|nested] 4+ messages in thread
* RE: [parisc-linux] FW: hp_boot.log
@ 2000-12-08 17:20 Witvliet, Hans
2000-12-08 19:58 ` Grant Grundler
0 siblings, 1 reply; 4+ messages in thread
From: Witvliet, Hans @ 2000-12-08 17:20 UTC (permalink / raw)
To: 'Andreas Thienemann'; +Cc: 'parisc-linux@thepuffingroup.com'
Hi Andreas,
I tried three other machines, with following results
1) B180c
2) B000
3) 712
On the B2000 booting also resulted in stack dump,
on B180c and the 712 the system freezes to death after the "switching to UPL
console" message.
I wonder, if it has something to do with the problem that i encounterd some
time ago with the linux port to sun-hardware.
If the system had to much memory, it was not able to startup.
Cant do much testing now, and next week i am @ HP. (see what happens if i
try to boot from my cd at the hp-trainings lab...;-))
Hans
> -----Original Message-----
> From: Andreas Thienemann [SMTP:andreas@bawue.de]
> Sent: Friday, December 08, 2000 5:33 PM
> To: Witvliet, Hans
> Cc: 'parisc-linux@thepuffingroup.com'; 'thuis'
> Subject: Re: [parisc-linux] FW: hp_boot.log
>
> Hi Hans,
>
> "Witvliet, Hans" wrote:
>
> > I had the impression that the C110 was supported, however when booting
> from
> > cd (from palinux.05.iso) i got following results:
> Interesting.
>
> This does resemble the crash I'm experiencing on my D250.
>
> The Kernel boots, finds some Hardware and than dumps stack. Somewhere
> after
> the message "Posix Conformance tested".
>
> The following is from my fault message:
> ---
> Data access rights fault in kernel: Code=26 regs=c7f9c7c0 (Addr=00000004)
>
> YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
> PSW: 00000000000001000000000000001011
> r0-3 00000000 c0291800 c02712ec 00000000
> r4-7 c7ffc400 ffffffff c01c3870 c025d800
> r8-11 c0292800 000000f0 00000000 000000ff
> r12-15 000000f2 000000fa 000000fd f0100000
> r16-19 f0001180 f0000070 f0000068 00000000
> r20-23 c7f9c74e 00000002 c0271574 ffd07000
> r24-27 c7f9c750 00000f20 00000000 c023a000
> r28-31 00000001 00000000 c7f9ca00 0027b9b8
> sr0-4 00000000 00000000 00000000 00000000
> sr4-8 00000000 00000000 00000000 00000000
>
> IASQ: 00000000 00000000 IAOQ: c0271308 c027130c
> IIR: 0e681096 ISR: 00000000 IOR: 00000004
> ORIG_R28: 000000fd
> ---
>
> I guess it has something to do with the "i82596_probe".
> Could you do a lookup of the IAOQ Register to see if it is the same?
> Get the "build-tools" from the CVs, and use the "a" program to lookup the
> symbol in your system-map.
>
> bye,
> andreas
>
> --------------------------------------------------------------------------
> -
> To unsubscribe: send e-mail to parisc-linux-request@thepuffingroup.com
> with
> `unsubscribe' as the subject.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [parisc-linux] FW: hp_boot.log
2000-12-08 17:20 Witvliet, Hans
@ 2000-12-08 19:58 ` Grant Grundler
0 siblings, 0 replies; 4+ messages in thread
From: Grant Grundler @ 2000-12-08 19:58 UTC (permalink / raw)
To: Witvliet, Hans
Cc: 'Andreas Thienemann',
'parisc-linux@thepuffingroup.com'
Hans/Andreas,
Re C110 crashing
> 3. U2-IOA BC GSC+ Port (7) at 0xf3fbf000,
I suspect the problem is the CCIO driver isn't seeing the U-turn
chip and DMA will HPMC (crash) the system. We should see some output
from ccio-dma.c driver before LASI "barks".
"Witvliet, Hans" wrote:
> Hi Andreas,
>
> I tried three other machines, with following results
> 1) B180c
> 2) B000
> 3) 712
> On the B2000 booting also resulted in stack dump,
B2000 is like a C3000 with fewer slots/slower CPU.
I don't remember of palinux-v0.5 was tested on that - looks like not.
Newer kernel should work - several of us are using C3k/J5k's for
development.
> on B180c and the 712 the system freezes to death after the "switching to UPL
> console" message.
For B180/712: Read the FAQ at www.parisc-linux.org/faq.html
>
> I wonder, if it has something to do with the problem that i encounterd some
> time ago with the linux port to sun-hardware.
> If the system had to much memory, it was not able to startup.
Not a problem. We ignore memory beyond 512MB right now.
> Cant do much testing now, and next week i am @ HP. (see what happens if i
> try to boot from my cd at the hp-trainings lab...;-))
enjoy!
grant
Grant Grundler
Unix Systems Enablement Lab
+1.408.447.7253
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2000-12-08 19:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-12-08 10:34 [parisc-linux] FW: hp_boot.log Witvliet, Hans
2000-12-08 16:33 ` Andreas Thienemann
-- strict thread matches above, loose matches on Subject: below --
2000-12-08 17:20 Witvliet, Hans
2000-12-08 19:58 ` Grant Grundler
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox