Re: [parisc-linux] Help wanted: XF86Config (B2600)

Re: [parisc-linux] Help wanted: XF86Config (B2600)

[joachim.weller]

[-- Attachment #1: Type: text/plain, Size: 756 bytes --]

Merci beacoup Thibault,

> it's a FXE card, unsupported.
> Only Vis-EG are.
> Support for these cards is planned to be worked on ;)

Would it be possible to plug in a standard PC PCI Grafics card, like lets 
say
a vanilla matrox  mgag550 and use that driver ?

Joachim Weller

Philips Medizin Systeme Boeblingen GmbH
Cardiac and Monitoring Systems (CMS) /New Product Engineering 
Phone: {+49|0}-7031-463-1891
Fax:   {+49|0}-7031-463-2112
________________________________________________________________________________
Geschäftsführer: Dr. Werner Haas, David Russell, Wolfgang Strenzl 
(Sprecher)
Sitz der Gesellschaft: Böblingen Registergericht Böblingen Reg.-Nr. HRB 
5187 
Hewlett-Packard Str. 2, D 71034 Boeblingen      -GERMANY-

[-- Attachment #2: Type: text/html, Size: 1064 bytes --]

Re: [parisc-linux] Help wanted: XF86Config (B2600)

[Thibaut VARENE]

joachim.weller@philips.com wrote:
> 
> Merci beacoup Thibault,
> 
>  > it's a FXE card, unsupported.
>  > Only Vis-EG are.
>  > Support for these cards is planned to be worked on ;)
> 
> Would it be possible to plug in a standard PC PCI Grafics card, like 
> lets say
> a vanilla matrox  mgag550 and use that driver ?
> 

IIRC, some are supported (weren't we talking about Voodoo2 recently ? :)
You should take a look at the m-l archive:
http://www.parisc-linux.org/mailing-lists/


Thibaut VARENE
PA/Linux ESIEE Team
http://pateam.esiee.fr/

[parisc-linux] Help wanted: XF86Config (B2600)

[joachim.weller]

[-- Attachment #1: Type: text/plain, Size: 1616 bytes --]

Hi,

since yesterday, I have up and running a B2600 with Debian woody 3.0,
but I can't setup  X11 Configuration for the built in PCI Grafic card,
using framebuffer driver.

The error message in  /etc/XFree86.0.log (XFree86 Version 4.1.0.1) 
says:
(EE) No devices detected.

although I have put in /etc/X11/XF86Config:

Section "Device"
        BoardName       "hp-3D"
        Identifier      "Device[0]"
        BusID           "1:3:0" 
        Driver          "fbdev"
        Option          "UseFBDev"              "true"
        Screen          0
EndSection

The BusID was determined by  "cat /proc/pci" :
  Bus  1, device   3, function  0:
    3D controller: PCI device 103c:108b (Hewlett-Packard Company) (rev 5).
      IRQ 258.
      Master Capable.  Latency=255.
      Prefetchable 64 bit memory at 0xfffffffffb000000 
[0xfffffffffbffffff].
      Non-prefetchable 64 bit memory at 0xfffffffffa000000 
[0xfffffffffaffffff].

If anybody has the same grafic card running, I would very much appreciate
to get a working XF86Config or any tips to resolve that problem.

Regards,
       Joachim

Joachim Weller

Philips Medizin Systeme Boeblingen GmbH
Cardiac and Monitoring Systems (CMS) /New Product Engineering 
Phone: {+49|0}-7031-463-1891
Fax:   {+49|0}-7031-463-2112
________________________________________________________________________________
Geschäftsführer: Dr. Werner Haas, David Russell, Wolfgang Strenzl 
(Sprecher)
Sitz der Gesellschaft: Böblingen Registergericht Böblingen Reg.-Nr. HRB 
5187 
Hewlett-Packard Str. 2, D 71034 Boeblingen      -GERMANY-

[-- Attachment #2: Type: text/html, Size: 3467 bytes --]

Re: [parisc-linux] Help wanted: XF86Config (B2600)

[Thibaut VARENE]

joachim.weller@philips.com wrote:

> The BusID was determined by  "cat /proc/pci" :
>   Bus  1, device   3, function  0:
>     3D controller: PCI device 103c:108b (Hewlett-Packard Company) (rev 5).
>       IRQ 258.
>       Master Capable.  Latency=255.
>       Prefetchable 64 bit memory at 0xfffffffffb000000 
> [0xfffffffffbffffff].
>       Non-prefetchable 64 bit memory at 0xfffffffffa000000 
> [0xfffffffffaffffff].
it's a FXE card, unsupported.
Only Vis-EG are.
Support for these cards is planned to be worked on ;)


HTH,

Thibaut VARENE
PA/Linux ESIEE Team
http://pateam.esiee.fr/

RE: [parisc-linux] Help wanted: XF86Config (B2600)

[jsoe0708]

Hey Joachim,

Have first a look with dmesg.

For my b2k a get unfortunately:
...
STI device: HPA4982A
stifb: Unsupported gfx card id 0x35acda16
...

Joel

>-- Original Message --
>From: joachim.weller@philips.com
>To: parisc-linux@lists.parisc-linux.org
>Subject: [parisc-linux] Help wanted: XF86Config (B2600)
>Date: Tue, 24 Sep 2002 14:40:33 +0200
>
>
>Hi,
>
>since yesterday, I have up and running a B2600 with Debian woody 3.0,
>but I can't setup  X11 Configuration for the built in PCI Grafic card,
>using framebuffer driver.
>
>The error message in  /etc/XFree86.0.log (XFree86 Version 4.1.0.1) 
>says:
>(EE) No devices detected.
>
>although I have put in /etc/X11/XF86Config:
>
>Section "Device"
>        BoardName       "hp-3D"
>        Identifier      "Device[0]"
>        BusID           "1:3:0" 
>        Driver          "fbdev"
>        Option          "UseFBDev"              "true"
>        Screen          0
>EndSection
>
>The BusID was determined by  "cat /proc/pci" :
>  Bus  1, device   3, function  0:
>    3D controller: PCI device 103c:108b (Hewlett-Packard Company) (rev 5).
>      IRQ 258.
>      Master Capable.  Latency=255.
>      Prefetchable 64 bit memory at 0xfffffffffb000000 
>[0xfffffffffbffffff].
>      Non-prefetchable 64 bit memory at 0xfffffffffa000000 
>[0xfffffffffaffffff].
>
>If anybody has the same grafic card running, I would very much appreciate
>to get a working XF86Config or any tips to resolve that problem.
>
>Regards,
>       Joachim
>
>Joachim Weller
>
>Philips Medizin Systeme Boeblingen GmbH
>Cardiac and Monitoring Systems (CMS) /New Product Engineering 
>Phone: {+49|0}-7031-463-1891
>Fax:   {+49|0}-7031-463-2112
>________________________________________________________________________________
>Gesch?ftsf?hrer: Dr. Werner Haas, David Russell, Wolfgang Strenzl 
>(Sprecher)
>Sitz der Gesellschaft: B?blingen Registergericht B?blingen Reg.-Nr. HRB

>5187 
>Hewlett-Packard Str. 2, D 71034 Boeblingen      -GERMANY-