From: Huang Rui <ray.huang@amd.com>
To: Felipe Balbi <balbi@ti.com>,
Alan Stern <stern@rowland.harvard.edu>,
"Bjorn Helgaas" <bhelgaas@google.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Paul Zimmerman <Paul.Zimmerman@synopsys.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Jason Chang <jason.chang@amd.com>,
"Vincent Wan" <vincent.wan@amd.com>, Tony Li <tony.li@amd.com>,
<linux-usb@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, Huang Rui <ray.huang@amd.com>
Subject: [PATCH v3 06/19] usb: dwc3: add u2exit lfps quirk
Date: Tue, 28 Oct 2014 19:54:27 +0800 [thread overview]
Message-ID: <1414497280-3126-7-git-send-email-ray.huang@amd.com> (raw)
In-Reply-To: <1414497280-3126-1-git-send-email-ray.huang@amd.com>
This patch adds u2exit lfps quirk, and some special platforms can configure
that if it is needed.
Signed-off-by: Huang Rui <ray.huang@amd.com>
---
drivers/usb/dwc3/core.c | 6 ++++++
drivers/usb/dwc3/core.h | 3 +++
drivers/usb/dwc3/platform_data.h | 1 +
3 files changed, 10 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 4f37a43..6abf4e9 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -468,6 +468,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
else
reg &= ~DWC3_GCTL_DISSCRAMBLE;
+ if (dwc->u2exit_lfps_quirk)
+ reg |= DWC3_GCTL_U2EXIT_LFPS;
+
/*
* WORKAROUND: DWC3 revisions <1.90a have a bug
* where the device can fail to connect at SuperSpeed
@@ -724,6 +727,8 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->disable_scramble_quirk = of_property_read_bool(node,
"snps,disable_scramble_quirk");
+ dwc->u2exit_lfps_quirk = of_property_read_bool(node,
+ "snps,u2exit_lfps_quirk");
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -734,6 +739,7 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->dr_mode = pdata->dr_mode;
dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
+ dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk;
}
/* default to superspeed if no maximum_speed passed */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 19d1ecb..03e0505 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -166,6 +166,7 @@
#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
#define DWC3_GCTL_DISSCRAMBLE (1 << 3)
+#define DWC3_GCTL_U2EXIT_LFPS (1 << 2)
#define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1)
#define DWC3_GCTL_DSBLCLKGTNG (1 << 0)
@@ -679,6 +680,7 @@ struct dwc3_scratchpad_array {
* @start_config_issued: true when StartConfig command has been issued
* @three_stage_setup: set if we perform a three phase setup
* @disable_scramble_quirk: set if we enable the disable scramble quirk
+ * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk
*/
struct dwc3 {
struct usb_ctrlrequest *ctrl_req;
@@ -787,6 +789,7 @@ struct dwc3 {
unsigned three_stage_setup:1;
unsigned disable_scramble_quirk:1;
+ unsigned u2exit_lfps_quirk:1;
};
/* -------------------------------------------------------------------------- */
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index 2e546ac..4e91e09 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -28,4 +28,5 @@ struct dwc3_platform_data {
unsigned disable_scramble_quirk:1;
unsigned has_lpm_erratum:1;
unsigned lpm_nyet_thres:4;
+ unsigned u2exit_lfps_quirk:1;
};
--
1.9.1
next prev parent reply other threads:[~2014-10-28 11:56 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-28 11:54 [PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC Huang Rui
2014-10-28 11:54 ` [PATCH v3 01/19] usb: dwc3: enable hibernation if to be supported Huang Rui
2014-10-28 18:47 ` Paul Zimmerman
2014-10-28 18:50 ` Felipe Balbi
2014-10-28 18:55 ` Paul Zimmerman
2014-10-28 19:01 ` Felipe Balbi
2014-10-28 19:15 ` Paul Zimmerman
2014-10-28 19:18 ` Felipe Balbi
2014-10-29 6:53 ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 02/19] usb: dwc3: add a flag to check if it is fpga board Huang Rui
2014-10-28 11:54 ` [PATCH v3 03/19] usb: dwc3: initialize platform data at pci glue layer Huang Rui
2014-10-28 11:54 ` [PATCH v3 04/19] usb: dwc3: add disscramble quirk Huang Rui
2014-10-28 16:39 ` Bjorn Helgaas
2014-10-28 18:42 ` Felipe Balbi
2014-10-29 6:50 ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 05/19] usb: dwc3: add lpm erratum support Huang Rui
2014-10-28 16:30 ` Bjorn Helgaas
2014-10-29 7:44 ` Huang Rui
2014-10-28 11:54 ` Huang Rui [this message]
2014-10-28 11:54 ` [PATCH v3 07/19] usb: dwc3: add P3 in U2 SS inactive quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 08/19] usb: dwc3: add request p1p2p3 quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 09/19] usb: dwc3: add delay " Huang Rui
2014-10-28 11:54 ` [PATCH v3 10/19] usb: dwc3: add delay phy power change quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 11/19] usb: dwc3: add lfps filter quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 12/19] usb: dwc3: add rx_detect to polling lfps quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 13/19] usb: dwc3: add tx demphasis quirk Huang Rui
2014-10-28 16:27 ` Bjorn Helgaas
2014-10-28 18:43 ` Felipe Balbi
2014-10-29 8:08 ` Huang Rui
2014-10-28 11:54 ` [PATCH v3 14/19] usb: dwc3: set SUSPHY bit for all cores Huang Rui
2014-10-28 11:54 ` [PATCH v3 15/19] usb: dwc3: add disable usb3 suspend phy quirk Huang Rui
2014-10-28 11:54 ` [PATCH v3 16/19] usb: dwc3: add disable usb2 " Huang Rui
2014-10-28 11:54 ` [PATCH v3 17/19] PCI: Add support for AMD Nolan USB3 DRD Huang Rui
2014-10-28 13:30 ` Bjorn Helgaas
2014-10-28 11:54 ` [PATCH v3 18/19] PCI: Add quirk to prevent AMD NL USB3 DRD to bind with xHCI driver Huang Rui
2014-10-28 12:06 ` Sergei Shtylyov
2014-10-28 12:15 ` Huang Rui
2014-10-28 13:29 ` Bjorn Helgaas
2014-10-28 11:54 ` [PATCH v3 19/19] usb: dwc3: add support for AMD NL platform Huang Rui
2014-10-28 13:38 ` Felipe Balbi
2014-10-28 14:35 ` Huang Rui
2014-10-29 9:13 ` Huang Rui
2014-10-29 14:11 ` Felipe Balbi
2014-10-29 14:33 ` Huang Rui
2014-10-29 14:48 ` Felipe Balbi
2014-10-28 14:41 ` [PATCH v3 00/19] usb: dwc3: add support for AMD Nolan SoC Felipe Balbi
2014-10-28 15:17 ` Huang Rui
2014-10-28 15:23 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414497280-3126-7-git-send-email-ray.huang@amd.com \
--to=ray.huang@amd.com \
--cc=Paul.Zimmerman@synopsys.com \
--cc=balbi@ti.com \
--cc=bhelgaas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=jason.chang@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=tony.li@amd.com \
--cc=vincent.wan@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox