* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) [not found] ` <1362819234.1220.1.camel@localhost.localdomain> @ 2013-03-09 13:07 ` Peter Hurley 2013-03-13 21:35 ` Jiri Kosina 0 siblings, 1 reply; 40+ messages in thread From: Peter Hurley @ 2013-03-09 13:07 UTC (permalink / raw) To: Thomas Meyer, Shawn Starr Cc: Alan Stern, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci [ +linux-pci, +linux-acpi, +Rafael Wysocki, +Bjorn Helgaas ] On Sat, 2013-03-09 at 09:53 +0100, Thomas Meyer wrote: > Am Freitag, den 08.03.2013, 21:19 -0500 schrieb Alan Stern: > > On Fri, 8 Mar 2013, Peter Hurley wrote: > > > > > [ +linux-usb ] > > > > > > On Fri, 2013-03-08 at 14:12 -0500, Shawn Starr wrote: > > > > Hello folks, > > > > > > > > I am noticing since rc0 and now rc1, very poor interrupt handling. Keyboard response, mouse movements, display refreshing etc. General input/display sluggishness. Did something break IRQ handling somewhere? I need to validate if this happens with X not running also if it is i915 related somehow. The behavor is noticed in a console login however. > > > > > > > > Device: Lenovo W500 laptop > > > > > > Hi Shawn, > > > > > > Unhandled interrupts is the problem. > > > > > > Is the device below being id'd properly? > > > If you remove this device, does the problem go away? > > > > Does either of the kernels in question have commit 0f815a0a700b (USB: > > UHCI: fix IRQ race during initialization)? That commit was added to > > fix precisely this sort of thing. > > I think so: > > $ git describe > v3.9-rc1-211-g47b3bc9 > > $ git branch --contains 0f815a0a700b > * master This might not be caused by USB. There were a lot of changes to PCI and ACPI for 3.9. Probably best to each file a bug at bugzilla.kernel.org with: Last known good kernel version -- For both good and bad kernels (preferably as attachments) -- /proc/interrupts lsusb lspci dmesg and reply back with the bugzilla #. It may be necessary to bisect this problem. Regards, Peter Hurley PS - I know it can be difficult to get those things on the bad kernel. It's easier if you boot to console. ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-09 13:07 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Peter Hurley @ 2013-03-13 21:35 ` Jiri Kosina 2013-03-14 14:51 ` Alan Stern 2013-03-14 18:48 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Yinghai Lu 0 siblings, 2 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-13 21:35 UTC (permalink / raw) To: Peter Hurley Cc: Thomas Meyer, Shawn Starr, Alan Stern, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci [-- Attachment #1: Type: TEXT/PLAIN, Size: 2566 bytes --] OK, this is a "me too", on Thinkpad x200s. [ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option) [ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186 [ 4.116850] Call Trace: [ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0 [ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240 [ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230 [ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70 [ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100 [ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150 [ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80 [ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0 [ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d [ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0 [ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560 [ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630 [ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130 [ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630 [ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0 [ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40 [ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120 [ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90 [ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360 [ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10 [ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0 [ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30 [ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220 [ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70 [ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0 [ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0 [ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280 [ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110 [ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0 [ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130 [ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0 [ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b [ 4.116943] handlers: [ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore] [ 4.116960] Disabling IRQ #16 I don't think I have seen this message on rc1+ (8343bce, to be precise), but I have definitely seen sluggish system response on that kernel as well. Attaching lspci, /proc/interrupts and dmesg. -- Jiri Kosina SUSE Labs [-- Attachment #2: Type: TEXT/plain, Size: 68458 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.9.0-rc2-00188-g6c23cbb (jkosina@noe) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #186 SMP Wed Mar 13 22:14:20 CET 2013 [ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c4a0fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c4a1000-0x000000007c4a6fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c4a7000-0x000000007c5b6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c5b7000-0x000000007c60efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c60f000-0x000000007c6c5fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c6c6000-0x000000007c6d0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007c6d1000-0x000000007c6d3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007c6d4000-0x000000007c6d7fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c6d8000-0x000000007c6dbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007c6dc000-0x000000007c6defff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c6df000-0x000000007c705fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007c706000-0x000000007c707fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007c708000-0x000000007c90efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c90f000-0x000000007c99efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007c99f000-0x000000007c9fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007c9ff000-0x000000007c9fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007effffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7ca00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 07D000000 mask FFF000000 uncachable [ 0.000000] 1 base 07E000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f73c0-0x000f73cf] mapped at [ffff8800000f73c0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 28672 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01d87000, 0x01d87fff] PGTABLE [ 0.000000] BRK [0x01d88000, 0x01d88fff] PGTABLE [ 0.000000] BRK [0x01d89000, 0x01d89fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7c200000-0x7c3fffff] [ 0.000000] [mem 0x7c200000-0x7c3fffff] page 2M [ 0.000000] BRK [0x01d8a000, 0x01d8afff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7c1fffff] [ 0.000000] [mem 0x7c000000-0x7c1fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x78000000-0x7bffffff] [ 0.000000] [mem 0x78000000-0x7bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x77ffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x77ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x7c400000-0x7c4a0fff] [ 0.000000] [mem 0x7c400000-0x7c4a0fff] page 4k [ 0.000000] BRK [0x01d8b000, 0x01d8bfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x7c4a7000-0x7c5b6fff] [ 0.000000] [mem 0x7c4a7000-0x7c5b6fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7c60f000-0x7c6c5fff] [ 0.000000] [mem 0x7c60f000-0x7c6c5fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x7c9ff000-0x7c9fffff] [ 0.000000] [mem 0x7c9ff000-0x7c9fffff] page 4k [ 0.000000] RAMDISK: [mem 0x36b1f000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000f7380 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 000000007c97bdcc 0009C (v01 LENOVO TP-6D 00002020 LTP 00000000) [ 0.000000] ACPI: FACP 000000007c97bf00 000F4 (v03 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: DSDT 000000007c97c2f4 0D889 (v01 LENOVO TP-6D 00002020 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007c98e000 00040 [ 0.000000] ACPI: SSDT 000000007c97c0b4 00240 (v01 LENOVO TP-6D 00002020 MSFT 03000000) [ 0.000000] ACPI: ECDT 000000007c989b7d 00052 (v01 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: APIC 000000007c989bcf 00078 (v01 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: MCFG 000000007c989c47 0003C (v01 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: HPET 000000007c989c83 00038 (v01 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: SLIC 000000007c989dc2 00176 (v01 LENOVO TP-6D 00002020 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007c989f38 00028 (v01 LENOVO TP-6D 00002020 LTP 00000001) [ 0.000000] ACPI: ASF! 000000007c989f60 000A0 (v16 LENOVO TP-6D 00002020 PTL 00000001) [ 0.000000] ACPI: SSDT 000000007c98d203 0055F (v01 LENOVO TP-6D 00002020 INTL 20050513) [ 0.000000] ACPI: TCPA 000000007c707000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: DMAR 000000007c706000 00120 (v01 ? 00000001 00000000) [ 0.000000] ACPI: SSDT 000000007c6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000007c6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000007c6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007c9fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7c9fffff] [ 0.000000] NODE_DATA [mem 0x7c6b1000-0x7c6c4fff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079c00000-ffff88007b7fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7c4a0fff] [ 0.000000] node 0: [mem 0x7c4a7000-0x7c5b6fff] [ 0.000000] node 0: [mem 0x7c60f000-0x7c6c5fff] [ 0.000000] node 0: [mem 0x7c9ff000-0x7c9fffff] [ 0.000000] On node 0 totalpages: 509446 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6923 pages used for memmap [ 0.000000] DMA32 zone: 505449 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007c4a1000 - 000000007c4a7000 [ 0.000000] PM: Registered nosave memory: 000000007c5b7000 - 000000007c60f000 [ 0.000000] PM: Registered nosave memory: 000000007c6c6000 - 000000007c6d1000 [ 0.000000] PM: Registered nosave memory: 000000007c6d1000 - 000000007c6d4000 [ 0.000000] PM: Registered nosave memory: 000000007c6d4000 - 000000007c6d8000 [ 0.000000] PM: Registered nosave memory: 000000007c6d8000 - 000000007c6dc000 [ 0.000000] PM: Registered nosave memory: 000000007c6dc000 - 000000007c6df000 [ 0.000000] PM: Registered nosave memory: 000000007c6df000 - 000000007c706000 [ 0.000000] PM: Registered nosave memory: 000000007c706000 - 000000007c708000 [ 0.000000] PM: Registered nosave memory: 000000007c708000 - 000000007c90f000 [ 0.000000] PM: Registered nosave memory: 000000007c90f000 - 000000007c99f000 [ 0.000000] PM: Registered nosave memory: 000000007c99f000 - 000000007c9ff000 [ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007c200000 s81408 r8192 d20992 u524288 [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502445 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1972936k/2041856k available (5512k kernel code, 4072k absent, 64848k reserved, 5408k data, 1364k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] kmemleak: Early log buffer exceeded (547), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1861.860 MHz processor [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.72 BogoMIPS (lpj=7447440) [ 0.004154] pid_max: default: 32768 minimum: 301 [ 0.008178] Security Framework initialized [ 0.008561] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009850] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.010482] Mount-cache hash table entries: 256 [ 0.011234] Initializing cgroup subsys cpuacct [ 0.011311] Initializing cgroup subsys devices [ 0.011386] Initializing cgroup subsys freezer [ 0.011462] Initializing cgroup subsys net_cls [ 0.011538] Initializing cgroup subsys blkio [ 0.011613] Initializing cgroup subsys perf_event [ 0.011792] Disabled fast string operations [ 0.011872] CPU: Physical Processor ID: 0 [ 0.011947] CPU: Processor Core ID: 0 [ 0.012006] mce: CPU supports 6 MCE banks [ 0.012089] CPU0: Thermal monitoring enabled (TM2) [ 0.012171] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.012171] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.012171] tlb_flushall_shift: -1 [ 0.012368] Freeing SMP alternatives: 20k freed [ 0.013362] ACPI: Core revision 20130117 [ 0.028912] ACPI: All ACPI Tables successfully acquired [ 0.032598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.072731] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (fam: 06, model: 17, stepping: 06) [ 0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.076000] ... version: 2 [ 0.076000] ... bit width: 40 [ 0.076000] ... generic registers: 2 [ 0.076000] ... value mask: 000000ffffffffff [ 0.076000] ... max period: 000000007fffffff [ 0.076000] ... fixed-purpose events: 3 [ 0.076000] ... event mask: 0000000700000003 [ 0.008000] Disabled fast string operations [ 0.076000] smpboot: Booting Node 0, Processors #1 [ 0.088030] Brought up 2 CPUs [ 0.088251] smpboot: Total of 2 processors activated (7447.44 BogoMIPS) [ 0.092773] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.093069] devtmpfs: initialized [ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6c6000-0x7c6d0fff] (45056 bytes) [ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6d8000-0x7c6dbfff] (16384 bytes) [ 0.098804] PM: Registering ACPI NVS region [mem 0x7c6df000-0x7c705fff] (159744 bytes) [ 0.098804] PM: Registering ACPI NVS region [mem 0x7c90f000-0x7c99efff] (589824 bytes) [ 0.098804] regulator-dummy: no parameters [ 0.098804] RTC time: 21:22:18, date: 03/13/13 [ 0.100100] NET: Registered protocol family 16 [ 0.100609] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.100716] ACPI: bus type PCI registered [ 0.100897] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.101007] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.111009] PCI: Using configuration type 1 for base access [ 0.113590] bio: create slab <bio-0> at 0 [ 0.113590] ACPI: Added _OSI(Module Device) [ 0.113590] ACPI: Added _OSI(Processor Device) [ 0.113590] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.113590] ACPI: Added _OSI(Processor Aggregator Device) [ 0.117277] ACPI: EC: EC description table is found, configuring boot EC [ 0.131147] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.142007] ACPI: SSDT 000000007c6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.142900] ACPI: Dynamic OEM Table Load: [ 0.143058] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.143582] ACPI: SSDT 000000007c6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.144872] ACPI: Dynamic OEM Table Load: [ 0.145030] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.145242] ACPI: SSDT 000000007c6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.145639] ACPI: Dynamic OEM Table Load: [ 0.145797] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.148176] ACPI: SSDT 000000007c6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.149058] ACPI: Dynamic OEM Table Load: [ 0.149216] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.152363] ACPI: Interpreter enabled [ 0.152445] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568) [ 0.152640] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568) [ 0.152850] ACPI: (supports S0 S3 S4 S5) [ 0.152925] ACPI: Using IOAPIC for interrupt routing [ 0.153065] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.184061] ACPI: Power Resource [PUBS] (on) [ 0.193601] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.196183] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.196977] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.197771] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.198564] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.199358] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.200157] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.200950] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.201550] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.202635] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.203662] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.203801] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.203990] PCI host bridge to bus 0000:00 [ 0.204005] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.204083] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.204161] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.204240] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.204319] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.204398] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.204477] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfebfffff] [ 0.204574] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.204769] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.204784] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit] [ 0.204793] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.204801] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.204930] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.204943] pci 0000:00:02.1: reg 10: [mem 0xf2400000-0xf24fffff 64bit] [ 0.205147] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000 [ 0.205167] pci 0000:00:03.0: reg 10: [mem 0xf2826800-0xf282680f 64bit] [ 0.205226] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.205401] pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185 [ 0.205418] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f] [ 0.205426] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f] [ 0.205435] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827] [ 0.205443] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b] [ 0.205451] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f] [ 0.205652] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002 [ 0.205668] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] [ 0.205677] pci 0000:00:03.3: reg 14: [mem 0xf2624000-0xf2624fff] [ 0.205944] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000 [ 0.205972] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff] [ 0.205985] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff] [ 0.205998] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.206095] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.206149] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.206320] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.206382] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.206548] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.206722] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.206784] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.206992] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.207054] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] [ 0.207226] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.207410] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.207439] pci 0000:00:1a.7: reg 10: [mem 0xf2826c00-0xf2826fff] [ 0.207560] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.207667] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.207844] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.207868] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit] [ 0.208046] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.208168] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.208347] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.208459] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.208521] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.208693] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.208805] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.208869] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.209094] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.209204] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.209280] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.209456] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.209518] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] [ 0.209674] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.209846] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.209907] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] [ 0.210103] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.210165] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] [ 0.210376] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.210405] pci 0000:00:1d.7: reg 10: [mem 0xf2827000-0xf28273ff] [ 0.210526] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.210628] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.210797] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.211039] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 [ 0.211300] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.211332] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] [ 0.211344] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] [ 0.211357] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] [ 0.211369] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] [ 0.211382] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.211395] pci 0000:00:1f.2: reg 24: [mem 0xf2826000-0xf28267ff] [ 0.211471] pci 0000:00:1f.2: PME# supported from D3hot [ 0.211622] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.211647] pci 0000:00:1f.3: reg 10: [mem 0xf2827400-0xf28274ff 64bit] [ 0.211679] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.211943] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.212217] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000 [ 0.212286] pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit] [ 0.212526] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.220047] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.220130] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 0.220250] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.220330] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.220336] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.220345] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.220490] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode) [ 0.220581] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.220584] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.220587] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.220590] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.220593] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.220596] pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xfebfffff] (subtractive decode) [ 0.225009] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.225185] acpi root: \_SB_.PCI0 notify handler is installed [ 0.225250] Found 1 acpi root devices [ 0.225398] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.228956] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.229110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.229110] vgaarb: loaded [ 0.229110] vgaarb: bridge control possible 0000:00:02.0 [ 0.229110] SCSI subsystem initialized [ 0.229110] ACPI: bus type ATA registered [ 0.229110] libata version 3.00 loaded. [ 0.229110] PCI: Using ACPI for IRQ routing [ 0.232836] PCI: pci_cache_line_size set to 64 bytes [ 0.232922] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.232925] e820: reserve RAM buffer [mem 0x7c4a1000-0x7fffffff] [ 0.232932] e820: reserve RAM buffer [mem 0x7c5b7000-0x7fffffff] [ 0.232936] e820: reserve RAM buffer [mem 0x7c6c6000-0x7fffffff] [ 0.232939] e820: reserve RAM buffer [mem 0x7ca00000-0x7fffffff] [ 0.233266] NetLabel: Initializing [ 0.233340] NetLabel: domain hash size = 128 [ 0.233415] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.233552] NetLabel: unlabeled traffic allowed by default [ 0.233645] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.233728] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.234012] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.236036] Switching to clocksource hpet [ 0.245684] pnp: PnP ACPI init [ 0.245779] ACPI: bus type PNP registered [ 0.267601] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.267683] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.267764] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.267843] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.267922] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.268013] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.268093] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.268173] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.268253] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.268333] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.268413] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.268493] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.268573] system 00:00: [mem 0x00100000-0x7effffff] could not be reserved [ 0.268653] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.268734] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.268815] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.289395] system 00:01: [io 0x164e-0x164f] has been reserved [ 0.289475] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.289556] system 00:01: [io 0x1180-0x11ff] has been reserved [ 0.289635] system 00:01: [io 0x0800-0x080f] has been reserved [ 0.289713] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.289792] system 00:01: [io 0x1600-0x1641] has been reserved [ 0.289870] system 00:01: [io 0x1600-0x161b] has been reserved [ 0.289950] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.290029] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.290109] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.290188] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.290268] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.290348] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.290428] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.290571] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.290599] pnp 00:03: [dma 4] [ 0.290652] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.290721] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.290803] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.290880] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.290958] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.291036] pnp 00:08: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) [ 0.311539] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.312276] pnp: PnP ACPI: found 10 devices [ 0.312352] ACPI: bus type PNP unregistered [ 0.322353] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.322359] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.322363] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.322376] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.322380] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.322413] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.322416] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.322419] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.322422] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.322425] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.322431] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f000000-0x7f1fffff] [ 0.322512] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.322621] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f400000-0x7f5fffff 64bit pref] [ 0.322730] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.322809] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff] [ 0.322890] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.322968] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.323050] pci 0000:00:1c.0: bridge window [mem 0x7f000000-0x7f1fffff] [ 0.323132] pci 0000:00:1c.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.323245] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.323323] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.323404] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 0.323486] pci 0000:00:1c.1: bridge window [mem 0x7f400000-0x7f5fffff 64bit pref] [ 0.323598] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.323675] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.323757] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.323839] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.323951] pci 0000:00:1e.0: PCI bridge to [bus 0d] [ 0.324388] pci 0000:00:1e.0: setting latency timer to 64 [ 0.324394] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.324396] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.324399] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.324402] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.324404] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.324407] pci_bus 0000:00: resource 9 [mem 0x7f000000-0xfebfffff] [ 0.324410] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.324413] pci_bus 0000:02: resource 1 [mem 0x7f000000-0x7f1fffff] [ 0.324415] pci_bus 0000:02: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.324418] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.324421] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff] [ 0.324424] pci_bus 0000:03: resource 2 [mem 0x7f400000-0x7f5fffff 64bit pref] [ 0.324426] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.324429] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.324432] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.324435] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] [ 0.324437] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff] [ 0.324440] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff] [ 0.324443] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.324445] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.324448] pci_bus 0000:0d: resource 9 [mem 0x7f000000-0xfebfffff] [ 0.324592] NET: Registered protocol family 2 [ 0.325583] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.325846] TCP bind hash table entries: 16384 (order: 7, 524288 bytes) [ 0.326103] TCP: Hash tables configured (established 16384 bind 16384) [ 0.326543] TCP: reno registered [ 0.326634] UDP hash table entries: 1024 (order: 4, 98304 bytes) [ 0.326757] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes) [ 0.327072] NET: Registered protocol family 1 [ 0.327168] pci 0000:00:02.0: Boot video device [ 0.327190] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.327691] pci 0000:00:1a.2: power state changed by ACPI to D0 [ 0.328226] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.329188] PCI: CLS 64 bytes, default 64 [ 0.329452] Unpacking initramfs... [ 0.879385] Freeing initrd memory: 21316k freed [ 0.891050] Simple Boot Flag at 0x35 set to 0x1 [ 0.891616] Scanning for low memory corruption every 60 seconds [ 0.892214] audit: initializing netlink socket (disabled) [ 0.892316] type=2000 audit(1363209738.892:1): initialized [ 0.925495] bounce pool size: 64 pages [ 0.925584] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.926354] VFS: Disk quotas dquot_6.5.2 [ 0.926481] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.927302] msgmni has been set to 3895 [ 0.928040] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.928205] io scheduler noop registered [ 0.928291] io scheduler deadline registered [ 0.928406] io scheduler cfq registered (default) [ 0.929750] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.930004] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.930256] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.930547] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.930631] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.930699] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.930779] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.930860] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.930928] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.931012] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.931257] intel_idle: does not run on family 6 model 23 [ 0.931318] GHES: HEST is not enabled! [ 0.931481] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 0.955377] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17) is a 16550A [ 0.955837] Non-volatile memory driver v1.3 [ 0.955913] Linux agpgart interface v0.103 [ 0.956139] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.956335] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.958785] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.959035] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.959357] ahci 0000:00:1f.2: version 3.0 [ 0.959590] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 0.959791] ahci: SSS flag set, parallel bus scan disabled [ 0.959895] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 0.960022] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs [ 0.960146] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.961168] scsi0 : ahci [ 0.961468] scsi1 : ahci [ 0.961708] scsi2 : ahci [ 0.961949] scsi3 : ahci [ 0.962131] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 43 [ 0.962241] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 43 [ 0.962348] ata3: DUMMY [ 0.962420] ata4: DUMMY [ 0.962683] libphy: Fixed MDIO Bus: probed [ 0.962761] PPP generic driver version 2.4.2 [ 0.963025] PPP BSD Compression module registered [ 0.963102] PPP Deflate Compression module registered [ 0.963181] PPP MPPE Compression module registered [ 0.963258] NET: Registered protocol family 24 [ 0.963430] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.974285] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.974368] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.974728] mousedev: PS/2 mouse device common for all mice [ 0.974959] rtc_cmos 00:06: RTC can wake from S4 [ 0.975302] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.975420] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.975547] cpuidle: using governor ladder [ 0.975622] cpuidle: using governor menu [ 0.975697] EFI Variables Facility v0.08 2004-May-17 [ 0.975823] hidraw: raw HID events driver (C) Jiri Kosina [ 0.976041] TCP: cubic registered [ 0.976224] NET: Registered protocol family 10 [ 0.977243] PM: Checking hibernation image partition /dev/sda1 [ 0.980750] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.280033] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.280578] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.280582] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.280690] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.281019] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133 [ 1.281099] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.281662] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.281667] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.281775] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.282104] ata1.00: configured for UDMA/133 [ 1.282448] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 1.282892] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.283214] sd 0:0:0:0: [sda] Write Protect is off [ 1.283293] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.283352] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.284291] sda: sda1 sda2 [ 1.284944] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.444397] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 1.600029] ata2: SATA link down (SStatus 0 SControl 300) [ 1.777004] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 1.794398] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1 [ 1.798483] PM: Hibernation image partition 8:1 present [ 1.798486] PM: Looking for hibernation image. [ 1.798711] PM: Image not found (code -22) [ 1.798713] PM: Hibernation image not present or could not be loaded. [ 1.798749] registered taskstats version 1 [ 1.799514] Magic number: 5:10:399 [ 1.801181] Freeing unused kernel memory: 1364k freed [ 1.801647] Write protecting the kernel read-only data: 10240k [ 1.803674] Freeing unused kernel memory: 620k freed [ 1.808877] Freeing unused kernel memory: 1620k freed [ 1.851024] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.851106] ACPI: Thermal Zone [THM0] (53 C) [ 1.853562] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.853641] ACPI: Thermal Zone [THM1] (52 C) [ 1.856461] ata_generic 0000:00:03.2: setting latency timer to 64 [ 1.857117] scsi4 : ata_generic [ 1.857361] scsi5 : ata_generic [ 1.857530] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18 [ 1.857611] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18 [ 1.888021] tsc: Refined TSC clocksource calibration: 1861.999 MHz [ 1.888102] Switching to clocksource tsc [ 2.192337] ACPI: Requesting acpi_cpufreq [ 2.195404] Monitor-Mwait will be used to enter C-1 state [ 2.195417] Monitor-Mwait will be used to enter C-2 state [ 2.195426] Monitor-Mwait will be used to enter C-3 state [ 2.195433] tsc: Marking TSC unstable due to TSC halts in idle [ 2.195527] ACPI: acpi_idle registered with cpuidle [ 2.196760] Switching to clocksource hpet [ 2.252779] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 2.260440] udevd[99]: starting version 173 [ 2.299501] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 2.322120] ACPI: bus type USB registered [ 2.322276] usbcore: registered new interface driver usbfs [ 2.322384] usbcore: registered new interface driver hub [ 2.327724] ACPI: Lid Switch [LID] [ 2.327963] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 2.330234] ACPI: Sleep Button [SLPB] [ 2.330437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.330918] ACPI: Power Button [PWRF] [ 2.346946] [drm] Initialized drm 1.1.0 20060810 [ 2.361651] usbcore: registered new device driver usb [ 2.413189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.419227] [drm] Memory usable by graphics device = 2048M [ 2.419316] i915 0000:00:02.0: setting latency timer to 64 [ 2.420937] uhci_hcd: USB Universal Host Controller Interface driver [ 2.490517] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 2.490538] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.490626] [drm] Driver supports precise vblank timestamp query. [ 2.490841] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.702183] fbcon: inteldrmfb (fb0) is primary device [ 3.231763] Console: switching to colour frame buffer device 180x56 [ 3.235328] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.235358] i915 0000:00:02.0: registered panic notifier [ 3.240880] acpi device:01: registered as cooling_device2 [ 3.241074] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.241221] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 3.241448] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.241714] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.241719] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.241762] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.241896] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 3.242024] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.242062] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.242103] usb usb1: Product: UHCI Host Controller [ 3.242131] usb usb1: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd [ 3.242170] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.242585] hub 1-0:1.0: USB hub found [ 3.242619] hub 1-0:1.0: 2 ports detected [ 3.242945] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.242950] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.242992] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.243121] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 3.243237] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.243276] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.243317] usb usb2: Product: UHCI Host Controller [ 3.243346] usb usb2: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd [ 3.243385] usb usb2: SerialNumber: 0000:00:1a.1 [ 3.243896] hub 2-0:1.0: USB hub found [ 3.243928] hub 2-0:1.0: 2 ports detected [ 3.244876] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 3.244882] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 3.244922] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 3.245048] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 3.245162] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.246688] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.248208] usb usb3: Product: UHCI Host Controller [ 3.249728] usb usb3: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd [ 3.251251] usb usb3: SerialNumber: 0000:00:1a.2 [ 3.255188] hub 3-0:1.0: USB hub found [ 3.256724] hub 3-0:1.0: 2 ports detected [ 3.258529] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.258534] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.260037] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.261634] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 3.263147] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.264541] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.266029] usb usb4: Product: UHCI Host Controller [ 3.267401] usb usb4: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd [ 3.268835] usb usb4: SerialNumber: 0000:00:1d.0 [ 3.270547] hub 4-0:1.0: USB hub found [ 3.272045] hub 4-0:1.0: 2 ports detected [ 3.274004] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.274012] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.275473] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 3.277009] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 3.278557] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.280015] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.281433] usb usb5: Product: UHCI Host Controller [ 3.282738] usb usb5: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd [ 3.284098] usb usb5: SerialNumber: 0000:00:1d.1 [ 3.285688] hub 5-0:1.0: USB hub found [ 3.287089] hub 5-0:1.0: 2 ports detected [ 3.288815] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.288821] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.290235] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 3.291683] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 3.293123] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.294397] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.295677] usb usb6: Product: UHCI Host Controller [ 3.296982] usb usb6: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb uhci_hcd [ 3.298277] usb usb6: SerialNumber: 0000:00:1d.2 [ 3.299819] hub 6-0:1.0: USB hub found [ 3.301200] hub 6-0:1.0: 2 ports detected [ 3.462805] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 3.462814] PM: Marking nosave pages: [mem 0x7c4a1000-0x7c4a6fff] [ 3.462817] PM: Marking nosave pages: [mem 0x7c5b7000-0x7c60efff] [ 3.462821] PM: Marking nosave pages: [mem 0x7c6c6000-0x7c9fefff] [ 3.462850] PM: Basic memory bitmaps created [ 3.474989] PM: Basic memory bitmaps freed [ 3.474997] video LNXVIDEO:00: Restoring backlight state [ 3.495558] PM: Starting manual resume from disk [ 3.496953] PM: Hibernation image partition 8:1 present [ 3.496956] PM: Looking for hibernation image. [ 3.497187] PM: Image not found (code -22) [ 3.497189] PM: Hibernation image not present or could not be loaded. [ 3.545910] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 3.556055] usb 2-1: new full-speed USB device number 2 using uhci_hcd [ 3.567188] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 3.727237] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810 [ 3.728695] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.730235] usb 2-1: Product: Fingerprint Sensor [ 3.844047] usb 2-2: new full-speed USB device number 3 using uhci_hcd [ 4.010237] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145 [ 4.011838] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.013326] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II [ 4.014906] usb 2-2: Manufacturer: Lenovo Computer Corp [ 4.109393] systemd-readahead-replay[388]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option) [ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186 [ 4.116850] Call Trace: [ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0 [ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240 [ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230 [ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70 [ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100 [ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150 [ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80 [ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0 [ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d [ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0 [ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560 [ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630 [ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130 [ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630 [ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0 [ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40 [ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120 [ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90 [ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360 [ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10 [ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0 [ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30 [ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220 [ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70 [ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0 [ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0 [ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280 [ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110 [ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0 [ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130 [ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0 [ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b [ 4.116943] handlers: [ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore] [ 4.116960] Disabling IRQ #16 [ 4.215596] udevd[406]: starting version 173 [ 4.261438] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 4.474227] pps_core: LinuxPPS API ver. 1 registered [ 4.475247] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 4.490149] PTP clock support registered [ 4.496173] ehci-pci: EHCI PCI platform driver [ 4.497504] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 4.497510] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 4.498644] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 4.499788] ehci-pci 0000:00:1a.7: debug port 1 [ 4.504820] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 4.504885] ehci-pci 0000:00:1a.7: irq 23, io mem 0xf2826c00 [ 4.516548] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 4.517755] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.518917] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.520113] usb usb7: Product: EHCI Host Controller [ 4.521238] usb usb7: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb ehci_hcd [ 4.522365] usb usb7: SerialNumber: 0000:00:1a.7 [ 4.528236] hub 7-0:1.0: USB hub found [ 4.529464] hub 7-0:1.0: 6 ports detected [ 4.531174] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 4.531180] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 4.532348] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 4.533549] ehci-pci 0000:00:1d.7: debug port 1 [ 4.538661] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 4.538735] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf2827000 [ 4.560515] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 4.561757] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.563083] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.564334] usb usb8: Product: EHCI Host Controller [ 4.565569] usb usb8: Manufacturer: Linux 3.9.0-rc2-00188-g6c23cbb ehci_hcd [ 4.566902] usb usb8: SerialNumber: 0000:00:1d.7 [ 4.591515] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k [ 4.592796] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 4.607818] mtp-probe[567]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1" [ 4.610109] hub 8-0:1.0: USB hub found [ 4.611543] hub 8-0:1.0: 6 ports detected [ 4.613534] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 4.616308] usb 2-1: USB disconnect, device number 2 [ 4.616324] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20130117/utaddress-251) [ 4.616325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.616331] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130117/utaddress-251) [ 4.616332] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.616336] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20130117/utaddress-251) [ 4.616337] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.616338] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.628318] e1000e 0000:00:19.0: setting latency timer to 64 [ 4.628457] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.630368] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 4.640424] wmi: Mapper loaded [ 4.653195] cfg80211: Calling CRDA to update world regulatory domain [ 4.701896] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 4.703611] Copyright(c) 2003-2013 Intel Corporation [ 4.705632] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 4.725360] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 [ 4.740229] tpm_tis 00:09: 1.2 TPM (device-id 0x1020, rev-id 6) [ 4.741976] tpm_tis 00:09: Intel iTPM workaround enabled [ 4.768109] usb 2-2: USB disconnect, device number 3 [ 4.792120] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 4.793905] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.795579] thinkpad_acpi: ThinkPad BIOS 6DET38WW (2.02 ), EC 7XHT21WW-1.03 [ 4.797294] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470BN2 [ 4.824561] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 4.843449] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.845290] ACPI: Battery Slot [BAT0] (battery present) [ 4.848542] thinkpad_acpi: radio switch found; radios are enabled [ 4.850429] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.852271] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.856794] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it [ 4.858655] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation [ 4.864668] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.866807] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:15:7a:65 [ 4.868727] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.868823] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 4.872503] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF [ 4.874760] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 4.881757] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 4.897078] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 4.897236] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.901050] ACPI: AC Adapter [AC] (on-line) [ 4.903316] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 4.908532] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 4.914432] hda_codec: CX20561 (Hermosa): BIOS auto-probing. [ 4.917701] ALSA sound/pci/hda/hda_auto_parser.c:335 autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker [ 4.917705] ALSA sound/pci/hda/hda_auto_parser.c:339 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.917708] ALSA sound/pci/hda/hda_auto_parser.c:343 hp_outs=2 (0x19/0x16/0x0/0x0/0x0) [ 4.917710] ALSA sound/pci/hda/hda_auto_parser.c:344 mono: mono_out=0x0 [ 4.917712] ALSA sound/pci/hda/hda_auto_parser.c:347 dig-out=0x1c/0x0 [ 4.917714] ALSA sound/pci/hda/hda_auto_parser.c:348 inputs: [ 4.917717] ALSA sound/pci/hda/hda_auto_parser.c:352 Mic=0x18 [ 4.917720] ALSA sound/pci/hda/hda_auto_parser.c:352 Internal Mic=0x1d [ 4.917723] ALSA sound/pci/hda/hda_auto_parser.c:352 Dock Mic=0x17 [ 4.919349] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 4.921864] ALSA sound/pci/hda/patch_conexant.c:3402 hda_codec: Enable sync_write for stable communication [ 4.929866] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.932516] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.935484] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 4.944714] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 4.954054] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 4.995577] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 4.997718] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 4.999837] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 5.001920] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 5.004073] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [ 5.006064] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 5.008180] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5.034023] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 5.043797] Bluetooth: Core ver 2.16 [ 5.045964] NET: Registered protocol family 31 [ 5.047935] Bluetooth: HCI device and connection manager initialized [ 5.049968] Bluetooth: HCI socket layer initialized [ 5.050711] ifup-sysctl[680]: ifup-sysctl lo -o hotplug [ 5.053878] Bluetooth: L2CAP socket layer initialized [ 5.054021] ifup-sysctl[682]: Applying lo ifsysctl settings [ 5.057656] Bluetooth: SCO socket layer initialized [ 5.070490] usbcore: registered new interface driver btusb [ 5.123448] iTCO_vendor_support: vendor-support=0 [ 5.125321] udev-configure-printer[707]: add /module/lpc_ich [ 5.126693] udev-configure-printer[707]: Failed to get parent [ 5.137293] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.139145] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) [ 5.163912] udev-configure-printer[713]: add /bus/pci/drivers/lpc_ich [ 5.165632] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.174627] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 5.177807] udev-configure-printer[713]: Failed to get parent [ 5.196277] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 5.200858] cfg80211: World regulatory domain updated: [ 5.202655] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.204496] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.206268] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.208081] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.209869] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.211630] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.270774] ifup-sysctl[769]: ifup-sysctl eth0 -o hotplug [ 5.284933] ifup-sysctl[774]: Applying eth0 ifsysctl settings [ 5.298959] ifup-sysctl[781]: ifup-sysctl wlan0 -o hotplug [ 5.306005] ifup-sysctl[790]: Applying wlan0 ifsysctl settings [ 5.320782] Adding 2104476k swap on /dev/sda1. Priority:0 extents:1 across:2104476k SS [ 5.349997] ifup[804]: eth0 -o hotplug [ 5.353701] ifup[806]: wlan0 -o hotplug [ 5.367297] ifup[819]: Service network not started and mode 'auto' -> skipping [ 5.372326] ifup[822]: Service network not started and mode 'auto' -> skipping [ 5.448815] mtp-probe[567]: bus: 2, device: 2 was not an MTP device [ 5.688096] usb 2-1: new full-speed USB device number 4 using uhci_hcd [ 5.860182] usb 2-1: New USB device found, idVendor=08ff, idProduct=2810 [ 5.863703] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.867154] usb 2-1: Product: Fingerprint Sensor [ 6.112176] usb 2-2: new full-speed USB device number 5 using uhci_hcd [ 6.283209] usb 2-2: New USB device found, idVendor=0a5c, idProduct=2145 [ 6.286596] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.289957] usb 2-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II [ 6.293306] usb 2-2: Manufacturer: Lenovo Computer Corp [ 6.320349] WARNING! power/level is deprecated; use power/control instead [ 6.328524] udevd[473]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory [ 6.345180] udevd[473]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory [ 6.352936] mtp-probe[844]: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1" [ 6.617416] mtp-probe[844]: bus: 2, device: 4 was not an MTP device [ 6.629292] udevd[472]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb2/2-1/2-1:1.0/power/level} for writing: No such file or directory [ 6.688416] device-mapper: uevent: version 1.0.3 [ 6.690521] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 6.866842] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.917311] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 6.988914] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 7.063415] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 7.064009] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 [ 7.073836] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 7.076145] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 [ 7.107750] tun: Universal TUN/TAP device driver, 1.6 [ 7.109121] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 7.953095] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 7.954658] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 8.139040] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8.140580] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 8.261431] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8.542102] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 8.644203] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 8.644531] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.603442] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.603443] Bluetooth: BNEP filters: protocol multicast [ 11.603461] Bluetooth: BNEP socket layer initialized [ 11.635882] nscd[2066]: segfault at 1 ip 0000000000000001 sp 00007fff61239748 error 14 in libnss_files-2.16.90.so[7f276d32f000+c000] [ 11.722837] Bluetooth: RFCOMM TTY layer initialized [ 11.724558] Bluetooth: RFCOMM socket layer initialized [ 11.726316] Bluetooth: RFCOMM ver 1.11 [ 12.550291] cgroup: libvirtd (2192) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 12.550488] cgroup: libvirtd (2192) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 16.742018] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 16.742405] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 16.865807] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.109843] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 17.212291] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 17.212588] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.263489] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 17.263893] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 17.389326] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.473551] NET: Registered protocol family 17 [ 22.532708] wlan0: authenticate with 00:b0:0c:4e:a5:28 [ 22.536209] wlan0: send auth to 00:b0:0c:4e:a5:28 (try 1/3) [ 22.538826] wlan0: authenticated [ 22.538910] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 22.540060] wlan0: associate with 00:b0:0c:4e:a5:28 (try 1/3) [ 22.542792] wlan0: RX AssocResp from 00:b0:0c:4e:a5:28 (capab=0x411 status=0 aid=4) [ 22.544327] wlan0: associated [ 22.544540] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 22.544750] cfg80211: Calling CRDA for country: CN [ 22.558781] cfg80211: Regulatory domain changed to country: CN [ 22.558785] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 22.558788] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 22.558790] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 29.241240] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0 [-- Attachment #3: Type: TEXT/plain, Size: 1999 bytes --] CPU0 CPU1 0: 14829 21007 IO-APIC-edge timer 1: 2264 19 IO-APIC-edge i8042 8: 1 0 IO-APIC-edge rtc0 9: 1197 999 IO-APIC-fasteoi acpi 12: 1945 2186 IO-APIC-edge i8042 16: 50247 49754 IO-APIC-fasteoi uhci_hcd:usb4 17: 1 1 IO-APIC-fasteoi uhci_hcd:usb5 18: 0 0 IO-APIC-fasteoi ata_generic, uhci_hcd:usb6 19: 0 0 IO-APIC-fasteoi ehci_hcd:usb8 20: 0 0 IO-APIC-fasteoi uhci_hcd:usb1 21: 164 146 IO-APIC-fasteoi uhci_hcd:usb2 22: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 1 2 IO-APIC-fasteoi ehci_hcd:usb7, i801_smbus 40: 0 0 PCI-MSI-edge PCIe PME 41: 0 0 PCI-MSI-edge PCIe PME 42: 0 0 PCI-MSI-edge PCIe PME 43: 8130 6874 PCI-MSI-edge ahci 44: 956 47 PCI-MSI-edge i915 45: 236 9 PCI-MSI-edge eth0 46: 18637 630 PCI-MSI-edge iwlwifi 47: 76 76 PCI-MSI-edge snd_hda_intel NMI: 15 14 Non-maskable interrupts LOC: 22437 15298 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 15 14 Performance monitoring interrupts IWI: 0 0 IRQ work interrupts RTR: 0 0 APIC ICR read retries RES: 4740 3751 Rescheduling interrupts CAL: 2632 9194 Function call interrupts TLB: 246 204 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 2 2 Machine check polls ERR: 0 MIS: 0 [-- Attachment #4: Type: TEXT/plain, Size: 27391 bytes --] 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) Subsystem: Lenovo Device 20e0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0a <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 20e4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0100c Data: 4142 Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Subsystem: Lenovo Device 20e4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) Subsystem: Lenovo Device 20e6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) (prog-if 85 [Master SecO PriO]) Subsystem: Lenovo Device 20ea Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at 1828 [size=8] Region 1: I/O ports at 180c [size=4] Region 2: I/O ports at 1820 [size=8] Region 3: I/O ports at 1808 [size=4] Region 4: I/O ports at 1810 [size=16] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: ata_generic Kernel modules: ata_generic 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) (prog-if 02 [16550]) Subsystem: Lenovo Device 20ec Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 1830 [size=8] Region 1: Memory at f2624000 (32-bit, non-prefetchable) [size=4K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: serial 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) Subsystem: Lenovo Device 20ee Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1840 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 41b2 Capabilities: [e0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1860 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1880 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 18a0 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 20f1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci-pci Kernel modules: ehci-pci 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Subsystem: Lenovo Device 20f2 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 47 Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 4172 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 7f000000-7f1fffff Prefetchable memory behind bridge: 000000007f200000-000000007f3fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41c1 Capabilities: [90] Subsystem: Lenovo Device 20f3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: f2500000-f25fffff Prefetchable memory behind bridge: 000000007f400000-000000007f5fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #1, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41d1 Capabilities: [90] Subsystem: Lenovo Device 20f3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=02 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0000000-f1ffffff Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #3, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0300c Data: 41e1 Capabilities: [90] Subsystem: Lenovo Device 20f3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=04 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 18c0 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 18e0 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1c00 [size=32] Capabilities: [50] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 20f1 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci-pci Kernel modules: ehci-pci 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Lenovo Device 20f4 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) Subsystem: Lenovo Device 20f5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 20f8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at 1c48 [size=8] Region 1: I/O ports at 183c [size=4] Region 2: I/O ports at 1c40 [size=8] Region 3: I/O ports at 1838 [size=4] Region 4: I/O ports at 1c20 [size=32] Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Address: fee0100c Data: 4122 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) Subsystem: Lenovo Device 20f9 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c60 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection Subsystem: Intel Corporation WiFi Link 5100 AGN Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4162 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-22-fa-ff-ff-34-b0-4c Kernel driver in use: iwlwifi Kernel modules: iwlwifi ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-13 21:35 ` Jiri Kosina @ 2013-03-14 14:51 ` Alan Stern 2013-03-14 14:56 ` Jiri Kosina 2013-03-14 18:48 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Yinghai Lu 1 sibling, 1 reply; 40+ messages in thread From: Alan Stern @ 2013-03-14 14:51 UTC (permalink / raw) To: Jiri Kosina Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Wed, 13 Mar 2013, Jiri Kosina wrote: > OK, this is a "me too", on Thinkpad x200s. > > [ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option) > [ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186 > [ 4.116850] Call Trace: > [ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0 > [ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240 > [ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230 > [ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70 > [ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100 > [ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150 > [ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80 > [ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0 > [ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d > [ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0 > [ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560 > [ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630 > [ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130 > [ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630 > [ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0 > [ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40 > [ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120 > [ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90 > [ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360 > [ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10 > [ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0 > [ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30 > [ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220 > [ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70 > [ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0 > [ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0 > [ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280 > [ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110 > [ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0 > [ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130 > [ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0 > [ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b > [ 4.116943] handlers: > [ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore] > [ 4.116960] Disabling IRQ #16 > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > but I have definitely seen sluggish system response on that kernel as > well. > > Attaching lspci, /proc/interrupts and dmesg. Can you try to do a git bisect for this? Is the sluggish system response clear enough that you can tell reliably when it is present and when it isn't? Alan Stern ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 14:51 ` Alan Stern @ 2013-03-14 14:56 ` Jiri Kosina 2013-03-14 15:18 ` Alan Stern 2013-03-14 16:09 ` Jiri Kosina 0 siblings, 2 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-14 14:56 UTC (permalink / raw) To: Alan Stern Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Thu, 14 Mar 2013, Alan Stern wrote: > > [ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option) > > [ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186 > > [ 4.116850] Call Trace: > > [ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0 > > [ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240 > > [ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230 > > [ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70 > > [ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100 > > [ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150 > > [ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80 > > [ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0 > > [ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d > > [ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0 > > [ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560 > > [ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630 > > [ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130 > > [ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630 > > [ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0 > > [ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40 > > [ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120 > > [ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90 > > [ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360 > > [ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10 > > [ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0 > > [ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30 > > [ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220 > > [ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70 > > [ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0 > > [ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0 > > [ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280 > > [ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110 > > [ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0 > > [ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130 > > [ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0 > > [ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b > > [ 4.116943] handlers: > > [ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore] > > [ 4.116960] Disabling IRQ #16 > > > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > > but I have definitely seen sluggish system response on that kernel as > > well. > > > > Attaching lspci, /proc/interrupts and dmesg. > > Can you try to do a git bisect for this? Is the sluggish system > response clear enough that you can tell reliably when it is present and > when it isn't? That was my first thought, but unfortunately I am afraid there will be point at which I will easily make a bisection mistake, as the responsiveness of the system varies over time, so it's not really a 100% objective measure. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 14:56 ` Jiri Kosina @ 2013-03-14 15:18 ` Alan Stern 2013-03-14 15:39 ` Jiri Kosina 2013-03-14 16:09 ` Jiri Kosina 1 sibling, 1 reply; 40+ messages in thread From: Alan Stern @ 2013-03-14 15:18 UTC (permalink / raw) To: Jiri Kosina Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Thu, 14 Mar 2013, Jiri Kosina wrote: > On Thu, 14 Mar 2013, Alan Stern wrote: > > > > [ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option) > > > [ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186 > > > [ 4.116850] Call Trace: > > > [ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0 > > > [ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240 > > > [ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230 > > > [ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70 > > > [ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100 > > > [ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150 > > > [ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80 > > > [ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0 > > > [ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d > > > [ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0 > > > [ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560 > > > [ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630 > > > [ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130 > > > [ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630 > > > [ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0 > > > [ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40 > > > [ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120 > > > [ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90 > > > [ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360 > > > [ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10 > > > [ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0 > > > [ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30 > > > [ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220 > > > [ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70 > > > [ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0 > > > [ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0 > > > [ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280 > > > [ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110 > > > [ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0 > > > [ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130 > > > [ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0 > > > [ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b > > > [ 4.116943] handlers: > > > [ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore] > > > [ 4.116960] Disabling IRQ #16 > > > > > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > > > but I have definitely seen sluggish system response on that kernel as > > > well. > > > > > > Attaching lspci, /proc/interrupts and dmesg. > > > > Can you try to do a git bisect for this? Is the sluggish system > > response clear enough that you can tell reliably when it is present and > > when it isn't? > > That was my first thought, but unfortunately I am afraid there will be > point at which I will easily make a bisection mistake, as the > responsiveness of the system varies over time, so it's not really a > 100% objective measure. All right. There have been only three significant changes to uhci-hcd since last summer, and two of them appear to be completely unrelated to this issue. The three commits are 3171fcabb169 USB: uhci: beautify source code 13996ca7afd5 USB: uhci: check buffer length to avoid memory overflow 0f815a0a700b USB: UHCI: fix IRQ race during initialization Reverting the first two almost certainly will not have any effect, but you may as well try it anyway. The third commit may be relevant. If you revert all three and still see the problem then it must be caused by changes outside of the USB stack. Differences in interrupt routing could be a result of changes to PCI or ACPI. Have you compared the current /proc/interrupts with versions from earlier kernels without this problem? Is occurrence of the "nobody cared" connected with any particular device? Somebody reported a similar problem not long ago (although IIRC it was for OHCI rather than UHCI) which appeared to be related to activity on the built-in webcam. Alan Stern ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 15:18 ` Alan Stern @ 2013-03-14 15:39 ` Jiri Kosina 2013-03-14 15:47 ` Jiri Kosina ` (2 more replies) 0 siblings, 3 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-14 15:39 UTC (permalink / raw) To: Alan Stern Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Thu, 14 Mar 2013, Alan Stern wrote: > > > Can you try to do a git bisect for this? Is the sluggish system > > > response clear enough that you can tell reliably when it is present and > > > when it isn't? > > > > That was my first thought, but unfortunately I am afraid there will be > > point at which I will easily make a bisection mistake, as the > > responsiveness of the system varies over time, so it's not really a > > 100% objective measure. > > All right. > > There have been only three significant changes to uhci-hcd since last > summer, and two of them appear to be completely unrelated to this > issue. The three commits are > > 3171fcabb169 USB: uhci: beautify source code > 13996ca7afd5 USB: uhci: check buffer length to avoid memory > overflow > 0f815a0a700b USB: UHCI: fix IRQ race during initialization > > Reverting the first two almost certainly will not have any effect, but > you may as well try it anyway. The third commit may be relevant. I have reverted all three commits, and the "nobody cared" is still there. > If you revert all three and still see the problem then it must be > caused by changes outside of the USB stack. Differences in interrupt > routing could be a result of changes to PCI or ACPI. Have you compared > the current /proc/interrupts with versions from earlier kernels without > this problem? The diff of stripped-down (without CPU statistics) /proc/interrupts from some oldish working 3.1 and the current tree: --- /tmp/interrupts-old.txt 2013-03-14 16:30:46.938710286 +0100 +++ /tmp/interrupts-new.txt 2013-03-14 16:30:18.954571413 +0100 @@ -3,27 +3,28 @@ 8:IO-APIC-edge rtc0 9:IO-APIC-fasteoi acpi 12:IO-APIC-edge i8042 - 16:IO-APIC-fasteoi uhci_hcd:usb6 - 17:IO-APIC-fasteoi uhci_hcd:usb7 - 18:IO-APIC-fasteoi ata_generic, uhci_hcd:usb8 - 19:IO-APIC-fasteoi ehci_hcd:usb2 - 20:IO-APIC-fasteoi uhci_hcd:usb3 - 21:IO-APIC-fasteoi uhci_hcd:usb4 - 22:IO-APIC-fasteoi uhci_hcd:usb5 - 23:IO-APIC-fasteoi ehci_hcd:usb1 + 16:IO-APIC-fasteoi uhci_hcd:usb4 + 17:IO-APIC-fasteoi uhci_hcd:usb5 + 18:IO-APIC-fasteoi ata_generic, uhci_hcd:usb6 + 19:IO-APIC-fasteoi ehci_hcd:usb8 + 20:IO-APIC-fasteoi uhci_hcd:usb1 + 21:IO-APIC-fasteoi uhci_hcd:usb2 + 22:IO-APIC-fasteoi uhci_hcd:usb3 + 23:IO-APIC-fasteoi ehci_hcd:usb7, i801_smbus 40:PCI-MSI-edge PCIe PME 41:PCI-MSI-edge PCIe PME 42:PCI-MSI-edge PCIe PME 43:PCI-MSI-edge ahci 44:PCI-MSI-edge i915 45:PCI-MSI-edge eth0 - 46:PCI-MSI-edge iwlagn + 46:PCI-MSI-edge iwlwifi 47:PCI-MSI-edge snd_hda_intel NMI:Non-maskable interrupts LOC:Local timer interrupts SPU:Spurious interrupts PMI:Performance monitoring interrupts IWI:IRQ work interrupts +RTR:APIC ICR read retries RES:Rescheduling interrupts CAL:Function call interrupts TLB:TLB shootdowns IRQ16 is routed differently (usb4 vs usb6), so that might be relevant. > Is occurrence of the "nobody cared" connected with any particular > device? Somebody reported a similar problem not long ago (although IIRC > it was for OHCI rather than UHCI) which appeared to be related to > activity on the built-in webcam. Will check this. No external devices are plugged in, I think the only internal one it has is bluetooth chip. I'll try turning it off. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 15:39 ` Jiri Kosina @ 2013-03-14 15:47 ` Jiri Kosina 2013-03-14 16:10 ` Alan Stern 2013-03-14 16:13 ` Alan Stern 2 siblings, 0 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-14 15:47 UTC (permalink / raw) To: Alan Stern Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Thu, 14 Mar 2013, Jiri Kosina wrote: > > Is occurrence of the "nobody cared" connected with any particular > > device? Somebody reported a similar problem not long ago (although IIRC > > it was for OHCI rather than UHCI) which appeared to be related to > > activity on the built-in webcam. > > Will check this. No external devices are plugged in, I think the only > internal one it has is bluetooth chip. I'll try turning it off. That didn't help (I disabled it via hard rfkill and it vanished from lsusb), i.e. it happens even with only the hubs being there. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 15:39 ` Jiri Kosina 2013-03-14 15:47 ` Jiri Kosina @ 2013-03-14 16:10 ` Alan Stern 2013-03-14 16:13 ` Alan Stern 2 siblings, 0 replies; 40+ messages in thread From: Alan Stern @ 2013-03-14 16:10 UTC (permalink / raw) To: Jiri Kosina Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Thu, 14 Mar 2013, Jiri Kosina wrote: > I have reverted all three commits, and the "nobody cared" is still there. > > > If you revert all three and still see the problem then it must be > > caused by changes outside of the USB stack. Differences in interrupt > > routing could be a result of changes to PCI or ACPI. Have you compared > > the current /proc/interrupts with versions from earlier kernels without > > this problem? > > The diff of stripped-down (without CPU statistics) /proc/interrupts from > some oldish working 3.1 and the current tree: > > --- /tmp/interrupts-old.txt 2013-03-14 16:30:46.938710286 +0100 > +++ /tmp/interrupts-new.txt 2013-03-14 16:30:18.954571413 +0100 > @@ -3,27 +3,28 @@ > 8:IO-APIC-edge rtc0 > 9:IO-APIC-fasteoi acpi > 12:IO-APIC-edge i8042 > - 16:IO-APIC-fasteoi uhci_hcd:usb6 > - 17:IO-APIC-fasteoi uhci_hcd:usb7 > - 18:IO-APIC-fasteoi ata_generic, uhci_hcd:usb8 > - 19:IO-APIC-fasteoi ehci_hcd:usb2 > - 20:IO-APIC-fasteoi uhci_hcd:usb3 > - 21:IO-APIC-fasteoi uhci_hcd:usb4 > - 22:IO-APIC-fasteoi uhci_hcd:usb5 > - 23:IO-APIC-fasteoi ehci_hcd:usb1 > + 16:IO-APIC-fasteoi uhci_hcd:usb4 > + 17:IO-APIC-fasteoi uhci_hcd:usb5 > + 18:IO-APIC-fasteoi ata_generic, uhci_hcd:usb6 > + 19:IO-APIC-fasteoi ehci_hcd:usb8 > + 20:IO-APIC-fasteoi uhci_hcd:usb1 > + 21:IO-APIC-fasteoi uhci_hcd:usb2 > + 22:IO-APIC-fasteoi uhci_hcd:usb3 > + 23:IO-APIC-fasteoi ehci_hcd:usb7, i801_smbus > 40:PCI-MSI-edge PCIe PME > 41:PCI-MSI-edge PCIe PME > 42:PCI-MSI-edge PCIe PME > 43:PCI-MSI-edge ahci > 44:PCI-MSI-edge i915 > 45:PCI-MSI-edge eth0 > - 46:PCI-MSI-edge iwlagn > + 46:PCI-MSI-edge iwlwifi > 47:PCI-MSI-edge snd_hda_intel > NMI:Non-maskable interrupts > LOC:Local timer interrupts > SPU:Spurious interrupts > PMI:Performance monitoring interrupts > IWI:IRQ work interrupts > +RTR:APIC ICR read retries > RES:Rescheduling interrupts > CAL:Function call interrupts > TLB:TLB shootdowns > > IRQ16 is routed differently (usb4 vs usb6), so that might be relevant. It looks like the order of probing changed. The old kernel did ehci-hcd before uhci-hcd and the new kernel did them in the opposite order. Consequently usb3-usb8 in the old kernel (the UHCI devices) are the same as usb1-usb6 in the new kernel. Likewise, usb1-usb2 in the old kernel are usb7-usb8 in the new kernel. In fact, the only major difference appears to be i801_smbus on IRQ 23. It's hard to see how that could have any effect. > > Is occurrence of the "nobody cared" connected with any particular > > device? Somebody reported a similar problem not long ago (although IIRC > > it was for OHCI rather than UHCI) which appeared to be related to > > activity on the built-in webcam. > > Will check this. No external devices are plugged in, I think the only > internal one it has is bluetooth chip. I'll try turning it off. All right. One other thing you could try: Transplant the entire uhci-hcd driver from 3.1 (or whatever) into 3.9-rc1. It should go okay -- you may have to apply by hand the appropriate parts of commits bc677d5b6464, 90ab5ee94171, and 9ffc93f203c1. Alan Stern ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 15:39 ` Jiri Kosina 2013-03-14 15:47 ` Jiri Kosina 2013-03-14 16:10 ` Alan Stern @ 2013-03-14 16:13 ` Alan Stern 2 siblings, 0 replies; 40+ messages in thread From: Alan Stern @ 2013-03-14 16:13 UTC (permalink / raw) To: Jiri Kosina Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Thu, 14 Mar 2013, Jiri Kosina wrote: > > There have been only three significant changes to uhci-hcd since last > > summer, and two of them appear to be completely unrelated to this > > issue. The three commits are > > > > 3171fcabb169 USB: uhci: beautify source code > > 13996ca7afd5 USB: uhci: check buffer length to avoid memory > > overflow > > 0f815a0a700b USB: UHCI: fix IRQ race during initialization > > > > Reverting the first two almost certainly will not have any effect, but > > you may as well try it anyway. The third commit may be relevant. > > I have reverted all three commits, and the "nobody cared" is still there. There's one other commit I failed to find at first: 840008bb5162 (USB: UHCI: notify usbcore about port resumes). Probably not relevant, but you should check to make sure. Alan Stern ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 14:56 ` Jiri Kosina 2013-03-14 15:18 ` Alan Stern @ 2013-03-14 16:09 ` Jiri Kosina 2013-03-14 16:42 ` Peter Hurley 2013-03-14 16:46 ` Rafael J. Wysocki 1 sibling, 2 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-14 16:09 UTC (permalink / raw) To: Alan Stern Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Thu, 14 Mar 2013, Jiri Kosina wrote: > > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > > > but I have definitely seen sluggish system response on that kernel as > > > well. > > > > > > Attaching lspci, /proc/interrupts and dmesg. > > > > Can you try to do a git bisect for this? Is the sluggish system > > response clear enough that you can tell reliably when it is present and > > when it isn't? > > That was my first thought, but unfortunately I am afraid there will be > point at which I will easily make a bisection mistake, as the > responsiveness of the system varies over time, so it's not really a > 100% objective measure. So I will try a bisect, but it'll take some time so that I could claim it to be trustworthy. Therefore in case anyone has any idea in parallel, I am all ears. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 16:09 ` Jiri Kosina @ 2013-03-14 16:42 ` Peter Hurley 2013-03-14 16:46 ` Rafael J. Wysocki 1 sibling, 0 replies; 40+ messages in thread From: Peter Hurley @ 2013-03-14 16:42 UTC (permalink / raw) To: Jiri Kosina Cc: Alan Stern, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Thu, 2013-03-14 at 17:09 +0100, Jiri Kosina wrote: > On Thu, 14 Mar 2013, Jiri Kosina wrote: > > > > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > > > > but I have definitely seen sluggish system response on that kernel as > > > > well. > > > > > > > > Attaching lspci, /proc/interrupts and dmesg. > > > > > > Can you try to do a git bisect for this? Is the sluggish system > > > response clear enough that you can tell reliably when it is present and > > > when it isn't? > > > > That was my first thought, but unfortunately I am afraid there will be > > point at which I will easily make a bisection mistake, as the > > responsiveness of the system varies over time, so it's not really a > > 100% objective measure. > > So I will try a bisect, but it'll take some time so that I could claim it > to be trustworthy. > > Therefore in case anyone has any idea in parallel, I am all ears. When I had this happen on -next, it was PCI + ACPI-related and I had to bisect it. But for me the problem was quite noticable and showed up right at login prompt. Regards, Peter Hurley PS - I already confirmed that the commit that fixes that is in 3.9-rc1 ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 16:09 ` Jiri Kosina 2013-03-14 16:42 ` Peter Hurley @ 2013-03-14 16:46 ` Rafael J. Wysocki 2013-03-14 17:06 ` Peter Hurley 1 sibling, 1 reply; 40+ messages in thread From: Rafael J. Wysocki @ 2013-03-14 16:46 UTC (permalink / raw) To: Jiri Kosina Cc: Alan Stern, Peter Hurley, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu On Thursday, March 14, 2013 05:09:59 PM Jiri Kosina wrote: > On Thu, 14 Mar 2013, Jiri Kosina wrote: > > > > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > > > > but I have definitely seen sluggish system response on that kernel as > > > > well. > > > > > > > > Attaching lspci, /proc/interrupts and dmesg. > > > > > > Can you try to do a git bisect for this? Is the sluggish system > > > response clear enough that you can tell reliably when it is present and > > > when it isn't? > > > > That was my first thought, but unfortunately I am afraid there will be > > point at which I will easily make a bisection mistake, as the > > responsiveness of the system varies over time, so it's not really a > > 100% objective measure. > > So I will try a bisect, but it'll take some time so that I could claim it > to be trustworthy. > > Therefore in case anyone has any idea in parallel, I am all ears. This one is a candidate to focus on I think: commit 181380b702eee1a9aca51354d7b87c7b08541fcf Author: Yinghai Lu <yinghai@kernel.org> Date: Sat Feb 16 11:58:34 2013 -0700 PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers Thanks, Rafael -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 16:46 ` Rafael J. Wysocki @ 2013-03-14 17:06 ` Peter Hurley 2013-03-14 17:22 ` Rafael J. Wysocki 0 siblings, 1 reply; 40+ messages in thread From: Peter Hurley @ 2013-03-14 17:06 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Jiri Kosina, Alan Stern, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu On Thu, 2013-03-14 at 17:46 +0100, Rafael J. Wysocki wrote: > On Thursday, March 14, 2013 05:09:59 PM Jiri Kosina wrote: > > On Thu, 14 Mar 2013, Jiri Kosina wrote: > > > > > > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > > > > > but I have definitely seen sluggish system response on that kernel as > > > > > well. > > > > > > > > > > Attaching lspci, /proc/interrupts and dmesg. > > > > > > > > Can you try to do a git bisect for this? Is the sluggish system > > > > response clear enough that you can tell reliably when it is present and > > > > when it isn't? > > > > > > That was my first thought, but unfortunately I am afraid there will be > > > point at which I will easily make a bisection mistake, as the > > > responsiveness of the system varies over time, so it's not really a > > > 100% objective measure. > > > > So I will try a bisect, but it'll take some time so that I could claim it > > to be trustworthy. > > > > Therefore in case anyone has any idea in parallel, I am all ears. > > This one is a candidate to focus on I think: > > commit 181380b702eee1a9aca51354d7b87c7b08541fcf > Author: Yinghai Lu <yinghai@kernel.org> > Date: Sat Feb 16 11:58:34 2013 -0700 > > PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers This patch __fixed__ this problem for me in linux-next back in February. Rafael, did you hold back some ACPI patches from 3.9 that would have made fix no longer applicable? ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 17:06 ` Peter Hurley @ 2013-03-14 17:22 ` Rafael J. Wysocki 2013-03-14 17:26 ` Peter Hurley 2013-03-15 7:59 ` Jiri Kosina 0 siblings, 2 replies; 40+ messages in thread From: Rafael J. Wysocki @ 2013-03-14 17:22 UTC (permalink / raw) To: Peter Hurley Cc: Jiri Kosina, Alan Stern, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu On Thursday, March 14, 2013 01:06:04 PM Peter Hurley wrote: > On Thu, 2013-03-14 at 17:46 +0100, Rafael J. Wysocki wrote: > > On Thursday, March 14, 2013 05:09:59 PM Jiri Kosina wrote: > > > On Thu, 14 Mar 2013, Jiri Kosina wrote: > > > > > > > > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > > > > > > but I have definitely seen sluggish system response on that kernel as > > > > > > well. > > > > > > > > > > > > Attaching lspci, /proc/interrupts and dmesg. > > > > > > > > > > Can you try to do a git bisect for this? Is the sluggish system > > > > > response clear enough that you can tell reliably when it is present and > > > > > when it isn't? > > > > > > > > That was my first thought, but unfortunately I am afraid there will be > > > > point at which I will easily make a bisection mistake, as the > > > > responsiveness of the system varies over time, so it's not really a > > > > 100% objective measure. > > > > > > So I will try a bisect, but it'll take some time so that I could claim it > > > to be trustworthy. > > > > > > Therefore in case anyone has any idea in parallel, I am all ears. > > > > This one is a candidate to focus on I think: > > > > commit 181380b702eee1a9aca51354d7b87c7b08541fcf > > Author: Yinghai Lu <yinghai@kernel.org> > > Date: Sat Feb 16 11:58:34 2013 -0700 > > > > PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers > > This patch __fixed__ this problem for me in linux-next back in February. > > Rafael, did you hold back some ACPI patches from 3.9 that would have > made fix no longer applicable? No, I didn't. I'm afraid, though, that the fix might not be effective on some systems for a reason that's unclear at the moment. So in fact the one to check is commit 4f535093cf ("PCI: Put pci_dev in device tree as early as possible") and if the problem doesn't appear before that, we need to figure out why the fix may not be sufficient. Thanks, Rafael -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 17:22 ` Rafael J. Wysocki @ 2013-03-14 17:26 ` Peter Hurley 2013-03-15 7:59 ` Jiri Kosina 1 sibling, 0 replies; 40+ messages in thread From: Peter Hurley @ 2013-03-14 17:26 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Jiri Kosina, Alan Stern, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu On Thu, 2013-03-14 at 18:22 +0100, Rafael J. Wysocki wrote: > On Thursday, March 14, 2013 01:06:04 PM Peter Hurley wrote: > > On Thu, 2013-03-14 at 17:46 +0100, Rafael J. Wysocki wrote: > > > On Thursday, March 14, 2013 05:09:59 PM Jiri Kosina wrote: > > > > On Thu, 14 Mar 2013, Jiri Kosina wrote: > > > > > > > > > > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > > > > > > > but I have definitely seen sluggish system response on that kernel as > > > > > > > well. > > > > > > > > > > > > > > Attaching lspci, /proc/interrupts and dmesg. > > > > > > > > > > > > Can you try to do a git bisect for this? Is the sluggish system > > > > > > response clear enough that you can tell reliably when it is present and > > > > > > when it isn't? > > > > > > > > > > That was my first thought, but unfortunately I am afraid there will be > > > > > point at which I will easily make a bisection mistake, as the > > > > > responsiveness of the system varies over time, so it's not really a > > > > > 100% objective measure. > > > > > > > > So I will try a bisect, but it'll take some time so that I could claim it > > > > to be trustworthy. > > > > > > > > Therefore in case anyone has any idea in parallel, I am all ears. > > > > > > This one is a candidate to focus on I think: > > > > > > commit 181380b702eee1a9aca51354d7b87c7b08541fcf > > > Author: Yinghai Lu <yinghai@kernel.org> > > > Date: Sat Feb 16 11:58:34 2013 -0700 > > > > > > PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers > > > > This patch __fixed__ this problem for me in linux-next back in February. > > > > Rafael, did you hold back some ACPI patches from 3.9 that would have > > made fix no longer applicable? > > No, I didn't. > > I'm afraid, though, that the fix might not be effective on some systems for a > reason that's unclear at the moment. > > So in fact the one to check is commit 4f535093cf ("PCI: Put pci_dev in device > tree as early as possible") and if the problem doesn't appear before that, we > need to figure out why the fix may not be sufficient. I agree. Commit 4f535093cf ("PCI: Put pci_dev in device tree as early as possible") is the likely culprit, and "Don't cache _PRT..." is probably an insufficient fix. Not so sure about the other reporters though because they had active devices on those USB ports. Regards, Peter Hurley ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-14 17:22 ` Rafael J. Wysocki 2013-03-14 17:26 ` Peter Hurley @ 2013-03-15 7:59 ` Jiri Kosina 2013-03-15 9:20 ` Harald Arnesen 1 sibling, 1 reply; 40+ messages in thread From: Jiri Kosina @ 2013-03-15 7:59 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, Kernel development list, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu On Thu, 14 Mar 2013, Rafael J. Wysocki wrote: > > > commit 181380b702eee1a9aca51354d7b87c7b08541fcf > > > Author: Yinghai Lu <yinghai@kernel.org> > > > Date: Sat Feb 16 11:58:34 2013 -0700 > > > > > > PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers > > > > This patch __fixed__ this problem for me in linux-next back in February. > > > > Rafael, did you hold back some ACPI patches from 3.9 that would have > > made fix no longer applicable? > > No, I didn't. > > I'm afraid, though, that the fix might not be effective on some systems for a > reason that's unclear at the moment. > > So in fact the one to check is commit 4f535093cf ("PCI: Put pci_dev in device > tree as early as possible") and if the problem doesn't appear before that, we > need to figure out why the fix may not be sufficient. With either 4f535093cf or 181380b702 I do *not* see the problem, i.e. these commits are not the culprit and it was caused by some later change. I will proceed with bisect now, hopefully it'll produce a meaningful result. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 7:59 ` Jiri Kosina @ 2013-03-15 9:20 ` Harald Arnesen 2013-03-15 13:33 ` Jiri Kosina 0 siblings, 1 reply; 40+ messages in thread From: Harald Arnesen @ 2013-03-15 9:20 UTC (permalink / raw) To: Kernel development list Cc: Jiri Kosina, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu I have the same problem on my Lenovo T500. I think the graphics card is involved. This laptop has "hybrid graphics" - one Intel GMA 4500MHD and one ATI Mobility Radeon HD 3650. When I boot with the Intel card, I get "irq 16: nobody cared" during boot, not when I boot with the ATI card. And /proc/interrupts are surely different with the two cards. Look at the irq 16 line: $ cat intel-interrupts.txt CPU0 CPU1 0: 23658 22859 IO-APIC-edge timer 1: 168 177 IO-APIC-edge i8042 8: 1 0 IO-APIC-edge rtc0 9: 329 347 IO-APIC-fasteoi acpi 12: 3065 3166 IO-APIC-edge i8042 16: 49732 50269 IO-APIC-fasteoi yenta, uhci_hcd:usb6 17: 1 0 IO-APIC-fasteoi firewire_ohci, uhci_hcd:usb7 18: 0 0 IO-APIC-fasteoi mmc0, uhci_hcd:usb8 19: 216 204 IO-APIC-fasteoi ehci_hcd:usb2 20: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 21: 114 103 IO-APIC-fasteoi uhci_hcd:usb4 22: 0 0 IO-APIC-fasteoi uhci_hcd:usb5 23: 9 9 IO-APIC-fasteoi i801_smbus, ehci_hcd:usb1 40: 0 0 DMAR_MSI-edge dmar2 41: 0 0 DMAR_MSI-edge dmar0 42: 0 0 DMAR_MSI-edge dmar3 43: 0 0 PCI-MSI-edge PCIe PME 44: 0 0 PCI-MSI-edge PCIe PME 45: 0 0 PCI-MSI-edge PCIe PME 46: 0 0 PCI-MSI-edge PCIe PME 47: 10023 10173 PCI-MSI-edge ahci 48: 10 8 PCI-MSI-edge mei 49: 22 30 PCI-MSI-edge eth0 50: 66 71 PCI-MSI-edge i915 51: 2508 2348 PCI-MSI-edge iwlwifi 52: 168 169 PCI-MSI-edge snd_hda_intel NMI: 17 17 Non-maskable interrupts LOC: 27988 25243 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 17 17 Performance monitoring interrupts IWI: 0 0 IRQ work interrupts RTR: 0 0 APIC ICR read retries RES: 4584 2746 Rescheduling interrupts CAL: 6178 7492 Function call interrupts TLB: 702 651 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 1 1 Machine check polls ERR: 0 MIS: 0 $ cat ati-interrupts.txt CPU0 CPU1 0: 15488 15268 IO-APIC-edge timer 1: 182 189 IO-APIC-edge i8042 8: 1 0 IO-APIC-edge rtc0 9: 328 339 IO-APIC-fasteoi acpi 12: 2071 1997 IO-APIC-edge i8042 16: 55 47 IO-APIC-fasteoi yenta, uhci_hcd:usb4 17: 1 1 IO-APIC-fasteoi firewire_ohci, uhci_hcd:usb5 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb6, mmc0 19: 219 202 IO-APIC-fasteoi ehci_hcd:usb8 20: 0 0 IO-APIC-fasteoi uhci_hcd:usb1 21: 112 104 IO-APIC-fasteoi uhci_hcd:usb2 22: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 10 8 IO-APIC-fasteoi i801_smbus, ehci_hcd:usb7 40: 0 0 DMAR_MSI-edge dmar1 41: 0 0 DMAR_MSI-edge dmar0 42: 0 0 DMAR_MSI-edge dmar2 43: 0 0 PCI-MSI-edge PCIe PME 44: 0 0 PCI-MSI-edge PCIe PME 45: 0 0 PCI-MSI-edge PCIe PME 46: 0 0 PCI-MSI-edge PCIe PME 47: 0 0 PCI-MSI-edge PCIe PME 48: 9733 9932 PCI-MSI-edge ahci 49: 9 9 PCI-MSI-edge mei 50: 2308 2196 PCI-MSI-edge iwlwifi 51: 15 35 PCI-MSI-edge eth0 52: 818 815 PCI-MSI-edge radeon 53: 167 167 PCI-MSI-edge snd_hda_intel NMI: 17 16 Non-maskable interrupts LOC: 18139 34223 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 17 16 Performance monitoring interrupts IWI: 0 0 IRQ work interrupts RTR: 0 0 APIC ICR read retries RES: 3788 3563 Rescheduling interrupts CAL: 6303 5894 Function call interrupts TLB: 711 711 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 1 1 Machine check polls ERR: 0 MIS: 0 -- Hilsen Harald ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 9:20 ` Harald Arnesen @ 2013-03-15 13:33 ` Jiri Kosina 2013-03-15 13:33 ` Jiri Kosina ` (2 more replies) 0 siblings, 3 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-15 13:33 UTC (permalink / raw) To: Harald Arnesen Cc: Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, 15 Mar 2013, Harald Arnesen wrote: > I have the same problem on my Lenovo T500. I think the graphics card is > involved. > > This laptop has "hybrid graphics" - one Intel GMA 4500MHD and one ATI > Mobility Radeon HD 3650. When I boot with the Intel card, I get "irq 16: > nobody cared" during boot, not when I boot with the ATI card. Confirming this. After a lot of hassle, I have bisected this reliably to commit 28c70f162a315bdcfbe0bf940a740ef8bfb918d6 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 13:53:45 2012 +0100 drm/i915: use the gmbus irq for waits Adding Daniel, Imre and Daniel to CC while I will try to figure out what's happening in parallel. Attaching dmesg.txt from the machine with 28c70f162a as head, with drm.debug=0xe. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 13:33 ` Jiri Kosina @ 2013-03-15 13:33 ` Jiri Kosina 2013-03-15 15:14 ` Jiri Kosina 2013-03-15 15:32 ` Greg KH 2 siblings, 0 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-15 13:33 UTC (permalink / raw) To: Harald Arnesen Cc: Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel [-- Attachment #1: Type: TEXT/PLAIN, Size: 193 bytes --] On Fri, 15 Mar 2013, Jiri Kosina wrote: > Attaching dmesg.txt from the machine with 28c70f162a as head, with > drm.debug=0xe. OK, now actually attaching it, sorry. -- Jiri Kosina SUSE Labs [-- Attachment #2: Type: TEXT/plain, Size: 108697 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.7.0-rc4-00382-g28c70f1 (jkosina@noe) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #214 SMP Fri Mar 15 11:58:58 CET 2013 [ 0.000000] Command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal drm.debug=0xe [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007c4a0fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c4a1000-0x000000007c4a6fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c4a7000-0x000000007c5b6fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c5b7000-0x000000007c60efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c60f000-0x000000007c6c5fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007c6c6000-0x000000007c6d0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007c6d1000-0x000000007c6d3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007c6d4000-0x000000007c6d7fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c6d8000-0x000000007c6dbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007c6dc000-0x000000007c6defff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c6df000-0x000000007c705fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007c706000-0x000000007c707fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007c708000-0x000000007c90efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007c90f000-0x000000007c99efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007c99f000-0x000000007c9fefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007c9ff000-0x000000007c9fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007cc00000-0x000000007effffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 7470BN2/7470BN2, BIOS 6DET38WW (2.02 ) 12/19/2008 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x7ca00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 07D000000 mask FFF000000 uncachable [ 0.000000] 1 base 07E000000 mask FFE000000 uncachable [ 0.000000] 2 base 000000000 mask F80000000 write-back [ 0.000000] 3 base 07CE00000 mask FFFE00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [mem 0x000f73c0-0x000f73cf] mapped at [ffff8800000f73c0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 28672 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x7c9fffff] [ 0.000000] [mem 0x00000000-0x7c9fffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x7c9fffff @ [mem 0x1fffd000-0x1fffffff] [ 0.000000] RAMDISK: [mem 0x36b31000-0x37feffff] [ 0.000000] ACPI: RSDP 00000000000f7380 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 000000007c97bdcc 0009C (v01 LENOVO TP-6D 00002020 LTP 00000000) [ 0.000000] ACPI: FACP 000000007c97bf00 000F4 (v03 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: DSDT 000000007c97c2f4 0D889 (v01 LENOVO TP-6D 00002020 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007c98e000 00040 [ 0.000000] ACPI: SSDT 000000007c97c0b4 00240 (v01 LENOVO TP-6D 00002020 MSFT 03000000) [ 0.000000] ACPI: ECDT 000000007c989b7d 00052 (v01 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: APIC 000000007c989bcf 00078 (v01 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: MCFG 000000007c989c47 0003C (v01 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: HPET 000000007c989c83 00038 (v01 LENOVO TP-6D 00002020 LNVO 00000001) [ 0.000000] ACPI: SLIC 000000007c989dc2 00176 (v01 LENOVO TP-6D 00002020 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007c989f38 00028 (v01 LENOVO TP-6D 00002020 LTP 00000001) [ 0.000000] ACPI: ASF! 000000007c989f60 000A0 (v16 LENOVO TP-6D 00002020 PTL 00000001) [ 0.000000] ACPI: SSDT 000000007c98d203 0055F (v01 LENOVO TP-6D 00002020 INTL 20050513) [ 0.000000] ACPI: TCPA 000000007c707000 00032 (v00 00000000 00000000) [ 0.000000] ACPI: DMAR 000000007c706000 00120 (v01 ? 00000001 00000000) [ 0.000000] ACPI: SSDT 000000007c6d3000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000007c6d2000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 000000007c6d1000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007c9fffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7c9fffff] [ 0.000000] NODE_DATA [mem 0x7c6b2000-0x7c6c5fff] [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880079c00000-ffff88007b7fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x7c4a0fff] [ 0.000000] node 0: [mem 0x7c4a7000-0x7c5b6fff] [ 0.000000] node 0: [mem 0x7c60f000-0x7c6c5fff] [ 0.000000] node 0: [mem 0x7c9ff000-0x7c9fffff] [ 0.000000] On node 0 totalpages: 509431 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 7 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6923 pages used for memmap [ 0.000000] DMA32 zone: 498526 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007c4a1000 - 000000007c4a7000 [ 0.000000] PM: Registered nosave memory: 000000007c5b7000 - 000000007c60f000 [ 0.000000] PM: Registered nosave memory: 000000007c6c6000 - 000000007c6d1000 [ 0.000000] PM: Registered nosave memory: 000000007c6d1000 - 000000007c6d4000 [ 0.000000] PM: Registered nosave memory: 000000007c6d4000 - 000000007c6d8000 [ 0.000000] PM: Registered nosave memory: 000000007c6d8000 - 000000007c6dc000 [ 0.000000] PM: Registered nosave memory: 000000007c6dc000 - 000000007c6df000 [ 0.000000] PM: Registered nosave memory: 000000007c6df000 - 000000007c706000 [ 0.000000] PM: Registered nosave memory: 000000007c706000 - 000000007c708000 [ 0.000000] PM: Registered nosave memory: 000000007c708000 - 000000007c90f000 [ 0.000000] PM: Registered nosave memory: 000000007c90f000 - 000000007c99f000 [ 0.000000] PM: Registered nosave memory: 000000007c99f000 - 000000007c9ff000 [ 0.000000] e820: [mem 0x7f000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007c200000 s80512 r8192 d21888 u524288 [ 0.000000] pcpu-alloc: s80512 r8192 d21888 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 502445 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda2 resume=/dev/sda1 showopts vga=normal drm.debug=0xe [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1973036k/2041856k available (5288k kernel code, 4132k absent, 64688k reserved, 5599k data, 1096k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] NR_IRQS:33024 nr_irqs:712 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] kmemleak: Kernel memory leak detector disabled [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] kmemleak: Early log buffer exceeded (514), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1862.033 MHz processor [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.06 BogoMIPS (lpj=7448132) [ 0.004158] pid_max: default: 32768 minimum: 301 [ 0.004391] Security Framework initialized [ 0.004771] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006054] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.006681] Mount-cache hash table entries: 256 [ 0.007248] Initializing cgroup subsys cpuacct [ 0.007324] Initializing cgroup subsys devices [ 0.007400] Initializing cgroup subsys freezer [ 0.007475] Initializing cgroup subsys net_cls [ 0.007550] Initializing cgroup subsys blkio [ 0.007625] Initializing cgroup subsys perf_event [ 0.008028] Disabled fast string operations [ 0.008107] CPU: Physical Processor ID: 0 [ 0.008182] CPU: Processor Core ID: 0 [ 0.008256] mce: CPU supports 6 MCE banks [ 0.008338] CPU0: Thermal monitoring enabled (TM2) [ 0.008414] process: using mwait in idle threads [ 0.008494] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.008494] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32 [ 0.008494] tlb_flushall_shift: -1 [ 0.008718] Freeing SMP alternatives: 20k freed [ 0.009680] ACPI: Core revision 20120913 [ 0.028563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068946] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU L9400 @ 1.86GHz (fam: 06, model: 17, stepping: 06) [ 0.072000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.072000] ... version: 2 [ 0.072000] ... bit width: 40 [ 0.072000] ... generic registers: 2 [ 0.072000] ... value mask: 000000ffffffffff [ 0.072000] ... max period: 000000007fffffff [ 0.072000] ... fixed-purpose events: 3 [ 0.072000] ... event mask: 0000000700000003 [ 0.008000] Disabled fast string operations [ 0.072000] smpboot: Booting Node 0, Processors #1 [ 0.084026] Brought up 2 CPUs [ 0.084246] smpboot: Total of 2 processors activated (7448.13 BogoMIPS) [ 0.088758] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.089052] devtmpfs: initialized [ 0.094755] PM: Registering ACPI NVS region [mem 0x7c6c6000-0x7c6d0fff] (45056 bytes) [ 0.094755] PM: Registering ACPI NVS region [mem 0x7c6d8000-0x7c6dbfff] (16384 bytes) [ 0.094755] PM: Registering ACPI NVS region [mem 0x7c6df000-0x7c705fff] (159744 bytes) [ 0.094755] PM: Registering ACPI NVS region [mem 0x7c90f000-0x7c99efff] (589824 bytes) [ 0.094755] regulator-dummy: no parameters [ 0.094755] RTC time: 13:19:30, date: 03/15/13 [ 0.094755] NET: Registered protocol family 16 [ 0.096136] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.096244] ACPI: bus type pci registered [ 0.096419] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.096529] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.106524] PCI: Using configuration type 1 for base access [ 0.109028] bio: create slab <bio-0> at 0 [ 0.109028] ACPI: Added _OSI(Module Device) [ 0.109028] ACPI: Added _OSI(Processor Device) [ 0.109028] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.109028] ACPI: Added _OSI(Processor Aggregator Device) [ 0.113670] ACPI: EC: EC description table is found, configuring boot EC [ 0.128012] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.138509] ACPI: SSDT 000000007c6d6c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.139567] ACPI: Dynamic OEM Table Load: [ 0.139725] ACPI: SSDT (null) 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.140450] ACPI: SSDT 000000007c6d4020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.141596] ACPI: Dynamic OEM Table Load: [ 0.141754] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.156726] ACPI: SSDT 000000007c6d5ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.157838] ACPI: Dynamic OEM Table Load: [ 0.157996] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.158200] ACPI: SSDT 000000007c6d5f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.158200] ACPI: Dynamic OEM Table Load: [ 0.158200] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.172343] ACPI: Interpreter enabled [ 0.172420] ACPI: (supports S0 S3 S4 S5) [ 0.172696] ACPI: Using IOAPIC for interrupt routing [ 0.188364] ACPI: Power Resource [PUBS] (on) [ 0.193445] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.197034] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.197115] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.197713] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.197844] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.198029] PCI host bridge to bus 0000:00 [ 0.198106] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.198184] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.198261] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.198339] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.198418] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.198497] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.198575] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xfebfffff] [ 0.198672] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000 [ 0.198734] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000 [ 0.198749] pci 0000:00:02.0: reg 10: [mem 0xf2000000-0xf23fffff 64bit] [ 0.198758] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.198765] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] [ 0.198820] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000 [ 0.198832] pci 0000:00:02.1: reg 10: [mem 0xf2400000-0xf24fffff 64bit] [ 0.200046] pci 0000:00:03.0: [8086:2a44] type 00 class 0x078000 [ 0.200061] pci 0000:00:03.0: reg 10: [mem 0xf2826800-0xf282680f 64bit] [ 0.200108] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.200137] pci 0000:00:03.2: [8086:2a46] type 00 class 0x010185 [ 0.200150] pci 0000:00:03.2: reg 10: [io 0x1828-0x182f] [ 0.200157] pci 0000:00:03.2: reg 14: [io 0x180c-0x180f] [ 0.200164] pci 0000:00:03.2: reg 18: [io 0x1820-0x1827] [ 0.200171] pci 0000:00:03.2: reg 1c: [io 0x1808-0x180b] [ 0.200178] pci 0000:00:03.2: reg 20: [io 0x1810-0x181f] [ 0.200236] pci 0000:00:03.3: [8086:2a47] type 00 class 0x070002 [ 0.200248] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] [ 0.200255] pci 0000:00:03.3: reg 14: [mem 0xf2624000-0xf2624fff] [ 0.200375] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000 [ 0.200402] pci 0000:00:19.0: reg 10: [mem 0xf2600000-0xf261ffff] [ 0.200415] pci 0000:00:19.0: reg 14: [mem 0xf2625000-0xf2625fff] [ 0.200427] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] [ 0.200524] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.200565] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.200626] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] [ 0.200712] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.200773] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] [ 0.200858] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.200920] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] [ 0.201018] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.201046] pci 0000:00:1a.7: reg 10: [mem 0xf2826c00-0xf2826fff] [ 0.201166] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.201215] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.201238] pci 0000:00:1b.0: reg 10: [mem 0xf2620000-0xf2623fff 64bit] [ 0.201344] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.201393] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400 [ 0.201503] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.201550] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400 [ 0.201660] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.201709] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400 [ 0.201819] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.201872] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.201933] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] [ 0.202019] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.202080] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] [ 0.202165] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.202226] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] [ 0.202323] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.202351] pci 0000:00:1d.7: reg 10: [mem 0xf2827000-0xf28273ff] [ 0.202471] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.202513] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 [ 0.202623] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100 [ 0.202812] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601 [ 0.202842] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] [ 0.202855] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] [ 0.202867] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] [ 0.202879] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] [ 0.202892] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] [ 0.202904] pci 0000:00:1f.2: reg 24: [mem 0xf2826000-0xf28267ff] [ 0.202980] pci 0000:00:1f.2: PME# supported from D3hot [ 0.203020] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.203043] pci 0000:00:1f.3: reg 10: [mem 0xf2827400-0xf28274ff 64bit] [ 0.203075] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] [ 0.203182] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.203425] pci 0000:03:00.0: [8086:4237] type 00 class 0x028000 [ 0.203486] pci 0000:03:00.0: reg 10: [mem 0xf2500000-0xf2501fff 64bit] [ 0.203720] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.203851] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.203934] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 0.204017] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.204097] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.204102] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.204111] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.204214] pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode) [ 0.204305] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.204308] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.204311] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.204314] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.204316] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.204319] pci 0000:00:1e.0: bridge window [mem 0x7f000000-0xfebfffff] (subtractive decode) [ 0.204349] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.204679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.204764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.204853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.205448] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.206339] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.219041] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.219703] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.220363] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.221023] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.221681] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.222342] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.223000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.223658] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.224288] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.224288] vgaarb: loaded [ 0.224288] vgaarb: bridge control possible 0000:00:02.0 [ 0.224636] SCSI subsystem initialized [ 0.224712] ACPI: bus type scsi registered [ 0.224795] libata version 3.00 loaded. [ 0.224795] PCI: Using ACPI for IRQ routing [ 0.226892] PCI: pci_cache_line_size set to 64 bytes [ 0.226988] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] [ 0.226992] e820: reserve RAM buffer [mem 0x7c4a1000-0x7fffffff] [ 0.226996] e820: reserve RAM buffer [mem 0x7c5b7000-0x7fffffff] [ 0.226999] e820: reserve RAM buffer [mem 0x7c6c6000-0x7fffffff] [ 0.227003] e820: reserve RAM buffer [mem 0x7ca00000-0x7fffffff] [ 0.228107] NetLabel: Initializing [ 0.228182] NetLabel: domain hash size = 128 [ 0.228256] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.228389] NetLabel: unlabeled traffic allowed by default [ 0.228488] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.228571] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.228855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.230939] Switching to clocksource hpet [ 0.236958] pnp: PnP ACPI init [ 0.237054] ACPI: bus type pnp registered [ 0.258555] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.258558] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.258562] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.258565] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.258567] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.258570] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.258573] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 0.258576] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 0.258579] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 0.258581] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.258584] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.258590] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.258593] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.258596] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.258599] pnp 00:00: [mem 0x00100000-0x7effffff] [ 0.258601] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.258604] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.258690] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.258771] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.258851] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.258931] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.259009] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.259089] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.259168] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.259248] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.259328] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.259407] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.259487] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.259566] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.259646] system 00:00: [mem 0x00100000-0x7effffff] could not be reserved [ 0.259727] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.259806] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.259887] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.259928] pnp 00:01: [bus 00-ff] [ 0.259931] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.259934] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.259937] pnp 00:01: [io 0x0d00-0xffff window] [ 0.259940] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.259943] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.259946] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.259949] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.259952] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.259955] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.259958] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.259961] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.259964] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.259967] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.259970] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.259973] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.259975] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.259978] pnp 00:01: [mem 0x7f000000-0xfebfffff window] [ 0.259981] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.260054] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.280506] pnp 00:02: [io 0x0010-0x001f] [ 0.280510] pnp 00:02: [io 0x0090-0x009f] [ 0.280512] pnp 00:02: [io 0x0024-0x0025] [ 0.280515] pnp 00:02: [io 0x0028-0x0029] [ 0.280518] pnp 00:02: [io 0x002c-0x002d] [ 0.280520] pnp 00:02: [io 0x0030-0x0031] [ 0.280523] pnp 00:02: [io 0x0034-0x0035] [ 0.280525] pnp 00:02: [io 0x0038-0x0039] [ 0.280528] pnp 00:02: [io 0x003c-0x003d] [ 0.280531] pnp 00:02: [io 0x00a4-0x00a5] [ 0.280533] pnp 00:02: [io 0x00a8-0x00a9] [ 0.280536] pnp 00:02: [io 0x00ac-0x00ad] [ 0.280538] pnp 00:02: [io 0x00b0-0x00b5] [ 0.280541] pnp 00:02: [io 0x00b8-0x00b9] [ 0.280543] pnp 00:02: [io 0x00bc-0x00bd] [ 0.280546] pnp 00:02: [io 0x0050-0x0053] [ 0.280549] pnp 00:02: [io 0x0072-0x0077] [ 0.280552] pnp 00:02: [io 0x164e-0x164f] [ 0.280554] pnp 00:02: [io 0x002e-0x002f] [ 0.280557] pnp 00:02: [io 0x1000-0x107f] [ 0.280560] pnp 00:02: [io 0x1180-0x11ff] [ 0.280562] pnp 00:02: [io 0x0800-0x080f] [ 0.280565] pnp 00:02: [io 0x15e0-0x15ef] [ 0.280567] pnp 00:02: [io 0x1600-0x1641] [ 0.280570] pnp 00:02: [io 0x1600-0x161b] [ 0.280575] pnp 00:02: [mem 0xe0000000-0xefffffff] [ 0.280578] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.280581] pnp 00:02: [mem 0xfed10000-0xfed13fff] [ 0.280584] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.280586] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.280589] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.280696] system 00:02: [io 0x164e-0x164f] has been reserved [ 0.280776] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.280858] system 00:02: [io 0x1180-0x11ff] has been reserved [ 0.280937] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.281015] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.281093] system 00:02: [io 0x1600-0x1641] has been reserved [ 0.281171] system 00:02: [io 0x1600-0x161b] has been reserved [ 0.281250] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 0.281329] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.281409] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.281489] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.281571] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.281650] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.281731] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.281814] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.281869] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.281889] pnp 00:04: [io 0x0000-0x000f] [ 0.281893] pnp 00:04: [io 0x0080-0x008f] [ 0.281895] pnp 00:04: [io 0x00c0-0x00df] [ 0.281898] pnp 00:04: [dma 4] [ 0.281946] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.281965] pnp 00:05: [io 0x0061] [ 0.282017] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.282036] pnp 00:06: [io 0x00f0] [ 0.282048] pnp 00:06: [irq 13] [ 0.282100] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.282121] pnp 00:07: [io 0x0070-0x0071] [ 0.282128] pnp 00:07: [irq 8] [ 0.282177] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.282198] pnp 00:08: [io 0x0060] [ 0.282201] pnp 00:08: [io 0x0064] [ 0.282208] pnp 00:08: [irq 1] [ 0.282260] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.282288] pnp 00:09: [irq 12] [ 0.282342] pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active) [ 0.302840] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.302895] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.303574] pnp: PnP ACPI: found 11 devices [ 0.303650] ACPI: ACPI bus type pnp unregistered [ 0.313359] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.313364] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 0.313368] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 [ 0.313381] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 0.313385] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 0.313417] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 0.313420] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.313423] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 0.313426] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.313429] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 0.313435] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f000000-0x7f1fffff] [ 0.313516] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.313623] pci 0000:00:1c.1: BAR 15: assigned [mem 0x7f400000-0x7f5fffff 64bit pref] [ 0.313731] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff] [ 0.313810] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff] [ 0.313891] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.313969] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.314051] pci 0000:00:1c.0: bridge window [mem 0x7f000000-0x7f1fffff] [ 0.314132] pci 0000:00:1c.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.314245] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.314322] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff] [ 0.314404] pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff] [ 0.314485] pci 0000:00:1c.1: bridge window [mem 0x7f400000-0x7f5fffff 64bit pref] [ 0.314598] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.314675] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.314757] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.314838] pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.314950] pci 0000:00:1e.0: PCI bridge to [bus 0d] [ 0.315085] pci 0000:00:1e.0: setting latency timer to 64 [ 0.315089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.315092] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.315094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.315097] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.315100] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.315102] pci_bus 0000:00: resource 9 [mem 0x7f000000-0xfebfffff] [ 0.315105] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff] [ 0.315107] pci_bus 0000:02: resource 1 [mem 0x7f000000-0x7f1fffff] [ 0.315110] pci_bus 0000:02: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref] [ 0.315112] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.315115] pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff] [ 0.315117] pci_bus 0000:03: resource 2 [mem 0x7f400000-0x7f5fffff 64bit pref] [ 0.315120] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 0.315122] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.315125] pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref] [ 0.315127] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7] [ 0.315130] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff] [ 0.315132] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff] [ 0.315135] pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.315137] pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.315140] pci_bus 0000:0d: resource 9 [mem 0x7f000000-0xfebfffff] [ 0.315284] NET: Registered protocol family 2 [ 0.316103] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.317942] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) [ 0.318892] TCP: Hash tables configured (established 262144 bind 65536) [ 0.319364] TCP: reno registered [ 0.319458] UDP hash table entries: 1024 (order: 4, 98304 bytes) [ 0.319595] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes) [ 0.319924] NET: Registered protocol family 1 [ 0.320056] pci 0000:00:02.0: Boot video device [ 0.320086] pci 0000:00:1a.0: power state changed by ACPI to D0 [ 0.320221] pci 0000:00:1a.2: power state changed by ACPI to D0 [ 0.320390] pci 0000:00:1d.0: power state changed by ACPI to D0 [ 0.320609] PCI: CLS 64 bytes, default 64 [ 0.320891] Unpacking initramfs... [ 0.866617] Freeing initrd memory: 21244k freed [ 0.877872] Simple Boot Flag at 0x35 set to 0x1 [ 0.878861] audit: initializing netlink socket (disabled) [ 0.878963] type=2000 audit(1363353570.876:1): initialized [ 0.910213] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.910953] VFS: Disk quotas dquot_6.5.2 [ 0.911079] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.911758] msgmni has been set to 3895 [ 0.912422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.912587] io scheduler noop registered [ 0.913223] io scheduler deadline registered [ 0.913334] io scheduler cfq registered (default) [ 0.914765] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.915017] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.915271] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.915536] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.915620] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.915662] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.915742] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 0.915824] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.915868] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt [ 0.915952] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded [ 0.916205] intel_idle: does not run on family 6 model 23 [ 0.960349] GHES: HEST is not enabled! [ 0.960512] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled [ 0.983394] 0000:00:03.3: ttyS4 at I/O 0x1830 (irq = 17) is a 16550A [ 0.983835] Non-volatile memory driver v1.3 [ 0.983911] Linux agpgart interface v0.103 [ 0.984140] agpgart-intel 0000:00:00.0: Intel GM45 Chipset [ 0.984336] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.986765] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.987024] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.987342] ahci 0000:00:1f.2: version 3.0 [ 0.987414] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 0.987609] ahci: SSS flag set, parallel bus scan disabled [ 0.987712] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 0.987821] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs [ 0.987931] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.988956] scsi0 : ahci [ 0.989233] scsi1 : ahci [ 0.989461] scsi2 : ahci [ 0.989700] scsi3 : ahci [ 0.989878] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 43 [ 0.989985] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 43 [ 0.990090] ata3: DUMMY [ 0.990162] ata4: DUMMY [ 0.990422] libphy: Fixed MDIO Bus: probed [ 0.990497] PPP generic driver version 2.4.2 [ 0.990701] PPP BSD Compression module registered [ 0.990780] PPP Deflate Compression module registered [ 0.990861] PPP MPPE Compression module registered [ 0.990936] NET: Registered protocol family 24 [ 0.991110] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.003072] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.003154] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.003421] mousedev: PS/2 mouse device common for all mice [ 1.003636] rtc_cmos 00:07: RTC can wake from S4 [ 1.003933] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.004060] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.004158] cpuidle: using governor ladder [ 1.004232] cpuidle: using governor menu [ 1.004307] EFI Variables Facility v0.08 2004-May-17 [ 1.004560] TCP: cubic registered [ 1.004739] NET: Registered protocol family 10 [ 1.005681] PM: Checking hibernation image partition /dev/sda1 [ 1.008608] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.312027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.313002] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.313006] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.313113] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.313441] ata1.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HA, max UDMA/133 [ 1.313521] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.313636] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.314371] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.314375] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.314481] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.314844] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 1.314848] ata1.00: configured for UDMA/133 [ 1.315117] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5 [ 1.315635] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.315868] sd 0:0:0:0: [sda] Write Protect is off [ 1.315962] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.316018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.316997] sda: sda1 sda2 [ 1.317570] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.543066] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 1.560527] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1 [ 1.632028] ata2: SATA link down (SStatus 0 SControl 300) [ 1.632175] PM: Hibernation image partition 8:1 present [ 1.632177] PM: Looking for hibernation image. [ 1.644336] PM: Image not found (code -22) [ 1.644339] PM: Hibernation image not present or could not be loaded. [ 1.644374] registered taskstats version 1 [ 1.645107] Magic number: 5:756:331 [ 1.645247] tty tty52: hash matches [ 1.645453] rtc_cmos 00:07: setting system clock to 2013-03-15 13:19:32 UTC (1363353572) [ 1.648124] Freeing unused kernel memory: 1096k freed [ 1.648508] Write protecting the kernel read-only data: 10240k [ 1.651682] Freeing unused kernel memory: 844k freed [ 1.658287] Freeing unused kernel memory: 1704k freed [ 1.700272] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.700354] ACPI: Thermal Zone [THM0] (53 C) [ 1.705438] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.705516] ACPI: Thermal Zone [THM1] (51 C) [ 1.708230] ata_generic 0000:00:03.2: setting latency timer to 64 [ 1.708860] scsi4 : ata_generic [ 1.709093] scsi5 : ata_generic [ 1.709285] ata5: PATA max UDMA/100 cmd 0x1828 ctl 0x180c bmdma 0x1810 irq 18 [ 1.709364] ata6: PATA max UDMA/100 cmd 0x1820 ctl 0x1808 bmdma 0x1818 irq 18 [ 1.876018] tsc: Refined TSC clocksource calibration: 1861.999 MHz [ 1.876098] Switching to clocksource tsc [ 2.044113] ACPI: Requesting acpi_cpufreq [ 2.049923] Monitor-Mwait will be used to enter C-1 state [ 2.049936] Monitor-Mwait will be used to enter C-2 state [ 2.049945] Monitor-Mwait will be used to enter C-3 state [ 2.049952] tsc: Marking TSC unstable due to TSC halts in idle [ 2.050044] ACPI: acpi_idle registered with cpuidle [ 2.050332] Switching to clocksource hpet [ 2.107518] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 2.114858] udevd[99]: starting version 173 [ 2.151983] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 2.174268] ACPI: bus type usb registered [ 2.174424] usbcore: registered new interface driver usbfs [ 2.174534] usbcore: registered new interface driver hub [ 2.184086] ACPI: Lid Switch [LID] [ 2.184278] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 2.184482] ACPI: Sleep Button [SLPB] [ 2.184679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 2.184868] ACPI: Power Button [PWRF] [ 2.195191] [drm] Initialized drm 1.1.0 20060810 [ 2.223938] usbcore: registered new device driver usb [ 1.315890] ACPI: Invalid Power Resource to register! [ 2.239383] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv,has_bsd_ring, [ 2.239485] i915 0000:00:02.0: setting latency timer to 64 [ 2.276601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.292378] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7c98b1f3 [ 2.292403] [drm:intel_opregion_setup], Public ACPI methods supported [ 2.292405] [drm:intel_opregion_setup], SWSCI supported [ 2.292407] [drm:intel_opregion_setup], ASLE supported [ 2.292477] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 2.292493] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.292573] [drm] Driver supports precise vblank timestamp query. [ 2.292652] [drm:init_vbt_defaults], Set default to SSC at 100MHz [ 2.292656] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA d [ 2.292659] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0 [ 2.292663] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 2.292668] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 2.292671] [drm:drm_mode_debug_printmodeline], Modeline 0:"1440x900" 0 74080 1440 1464 1480 1600 900 903 909 926 0x8 0xa [ 2.292675] [drm:parse_lfp_panel_data], VBT initial LVDS value 42300300 [ 2.292679] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 2.292681] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 2.292685] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 2.292701] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 2.292774] [drm:intel_modeset_init], 2 display pipes available. [ 2.292791] [drm:intel_modeset_init], plane 0 init failed: -19 [ 2.292804] [drm:intel_modeset_init], plane 1 init failed: -19 [ 2.292806] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation [ 2.292811] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.293661] [drm:i965_irq_handler], pipe B underrun [ 2.293666] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.300774] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.301137] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.301501] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.301866] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.302232] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.302971] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.303335] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.303700] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.304072] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.304437] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.304802] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.305166] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.305531] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.305896] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.306261] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.306625] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.306990] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.307355] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.307720] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.308092] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.308457] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.308821] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.309186] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.309550] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.309915] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.310281] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.310645] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.311010] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.311375] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.311740] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.312111] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.320082] [drm:intel_lvds_init], using preferred mode from EDID: [ 2.320087] [drm:drm_mode_debug_printmodeline], Modeline 8:"1440x900" 0 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa [ 2.320176] [drm:intel_lvds_init], detected single-link lvds configuration [ 2.320269] [drm:intel_panel_get_backlight], get backlight PWM = 3211215 [ 2.320323] [drm:intel_panel_get_backlight], get backlight PWM = 3211215 [ 2.320401] [drm:intel_setup_outputs], probing SDVOB [ 2.320409] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.340786] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 2.340790] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 2.346953] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.346959] [drm:intel_setup_outputs], probing HDMI on SDVOB [ 2.347061] [drm:intel_setup_outputs], probing DP_B [ 2.347141] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 2.349638] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 2.349641] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.352135] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 2.352137] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.352192] [drm:intel_setup_outputs], probing SDVOC [ 2.352203] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.376901] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 2.376905] [drm:intel_sdvo_init], No SDVO device found on SDVOC [ 2.376955] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.376960] [drm:intel_setup_outputs], probing HDMI on SDVOC [ 2.377058] [drm:intel_setup_outputs], probing DP_C [ 2.377152] [drm:intel_dp_i2c_init], i2c_init DPDDC-C [ 2.379640] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 2.379643] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.382137] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 2.382139] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.382191] [drm:intel_setup_outputs], probing DP_D [ 2.382270] [drm:intel_dp_i2c_init], i2c_init DPDDC-D [ 2.384765] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 2.384767] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.387255] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085 [ 2.387257] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 2.387311] [drm:intel_tv_init], Integrated TV is not present. [ 2.387317] [drm:i915_gem_init_global_gtt], clearing unused GTT space: [0, 7ffff000] [ 2.390290] [drm:init_status_page], render ring hws offset: 0x00001000 [ 2.390506] [drm:init_status_page], bsd ring hws offset: 0x00024000 [ 2.390688] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: disabled [ 2.390691] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: enabled [ 2.390695] [drm:intel_modeset_setup_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1 [ 2.390698] [drm:intel_modeset_setup_hw_state], [ENCODER:13:DAC-13] hw state readout: disabled, pipe=0 [ 2.390701] [drm:intel_modeset_setup_hw_state], [ENCODER:14:TMDS-14] hw state readout: disabled, pipe=0 [ 2.390704] [drm:intel_modeset_setup_hw_state], [ENCODER:18:TMDS-18] hw state readout: disabled, pipe=0 [ 2.390707] [drm:intel_modeset_setup_hw_state], [ENCODER:20:TMDS-20] hw state readout: disabled, pipe=0 [ 2.390710] [drm:intel_modeset_setup_hw_state], [ENCODER:22:TMDS-22] hw state readout: disabled, pipe=0 [ 2.390713] [drm:intel_modeset_setup_hw_state], [ENCODER:24:TMDS-24] hw state readout: disabled, pipe=0 [ 2.390717] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled [ 2.390720] [drm:intel_modeset_setup_hw_state], [CONNECTOR:12:VGA-1] hw state readout: disabled [ 2.390723] [drm:intel_modeset_setup_hw_state], [CONNECTOR:15:HDMI-A-1] hw state readout: disabled [ 2.390725] [drm:intel_modeset_setup_hw_state], [CONNECTOR:19:DP-1] hw state readout: disabled [ 2.390728] [drm:intel_modeset_setup_hw_state], [CONNECTOR:21:HDMI-A-2] hw state readout: disabled [ 2.390731] [drm:intel_modeset_setup_hw_state], [CONNECTOR:23:DP-2] hw state readout: disabled [ 2.390734] [drm:intel_modeset_setup_hw_state], [CONNECTOR:25:DP-3] hw state readout: disabled [ 2.390739] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 2.390743] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 2.390746] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 2.390748] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 2.390751] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 2.390754] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 2.390756] [drm:intel_modeset_check_state], [ENCODER:22:TMDS-22] [ 2.390758] [drm:intel_modeset_check_state], [ENCODER:24:TMDS-24] [ 2.390761] [drm:intel_modeset_check_state], [CRTC:3] [ 2.390763] [drm:intel_modeset_check_state], [CRTC:4] [ 2.390777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 2.390794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 2.390796] [drm:drm_mode_debug_printmodeline], Modeline 27:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa [ 2.390801] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 2.402390] [drm:intel_crt_detect], CRT detected via hotplug [ 2.402536] [drm:gmbus_irq_handler], GMBUS interrupt [ 2.403651] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 2.403656] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.403658] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 2.403660] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 2.403917] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 2.403919] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 2.460113] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 2.460120] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.460124] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 2.460127] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 2.484714] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 2.484716] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 2.484731] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes : [ 2.484734] [drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.484738] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 2.484741] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 2.484745] [drm:drm_mode_debug_printmodeline], Modeline 28:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 2.484748] [drm:drm_mode_debug_printmodeline], Modeline 8:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 2.484752] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 2.484755] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 2.484758] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 2.484761] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2.484763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 2.484766] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 2.484768] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 2.484770] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] [ 2.484772] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2.484774] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected [ 2.484777] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] [ 2.484779] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 2.484781] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected [ 2.484783] [drm:drm_setup_crtcs], [ 2.484786] [drm:drm_enable_connectors], connector 5 enabled? yes [ 2.484788] [drm:drm_enable_connectors], connector 12 enabled? yes [ 2.484789] [drm:drm_enable_connectors], connector 15 enabled? no [ 2.484791] [drm:drm_enable_connectors], connector 19 enabled? no [ 2.484793] [drm:drm_enable_connectors], connector 21 enabled? no [ 2.484795] [drm:drm_enable_connectors], connector 23 enabled? no [ 2.484796] [drm:drm_enable_connectors], connector 25 enabled? no [ 2.484798] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 2.484800] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 2.484803] [drm:drm_target_preferred], found mode 1440x900 [ 2.484804] [drm:drm_target_preferred], looking for cmdline mode on connector 12 [ 2.484806] [drm:drm_target_preferred], looking for preferred mode on connector 12 [ 2.484808] [drm:drm_target_preferred], found mode 1024x768 [ 2.484810] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 2.484816] [drm:drm_setup_crtcs], desired mode 1440x900 set on crtc 3 [ 2.484819] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 4 [ 2.490633] [drm:intelfb_create], allocated 1440x900 fb: 0x00046000, bo ffff880036b5b6c0 [ 2.490842] fbcon: inteldrmfb (fb0) is primary device [ 2.491660] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 2.491669] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 2.491671] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 2.491674] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.491676] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa [ 2.491680] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.491681] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 2.491682] [drm:intel_crtc_set_config], attempting to set mode from userspace [ 2.491684] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa [ 2.491687] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 2 [ 2.491689] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0 [ 2.491691] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 2.491699] [drm:intel_opregion_asle_intr], non asle set request?? [ 2.792104] [drm:intel_update_fbc], no output, disabling [ 2.792108] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0 [ 2.792116] [drm:intel_modeset_adjusted_mode], [CRTC:3] [ 2.792121] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz [ 2.792454] [drm:i9xx_crtc_mode_set], Mode for pipe A: [ 2.792457] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa [ 2.792458] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [ 2.816109] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760 [ 2.816111] [drm:intel_update_fbc], fbc set to per-chip default [ 2.816113] [drm:intel_update_fbc], fbc disabled per module param [ 2.816116] [drm:g4x_check_srwm], SR watermark: display plane 58, cursor 6 [ 2.816119] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=2, cursor=2, SR: plane=58, cursor=6 [ 2.816122] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:30:1440x900] [ 2.816124] [drm:g4x_check_srwm], SR watermark: display plane 58, cursor 6 [ 2.816127] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=2, cursor=2, SR: plane=58, cursor=6 [ 2.840135] [drm:intel_update_fbc], fbc set to per-chip default [ 2.840136] [drm:intel_update_fbc], fbc disabled per module param [ 2.840139] [drm:intel_enable_lvds], applying panel-fitter: 0, 0 [ 3.048104] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 [ 3.048107] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 3.048113] [drm:intel_opregion_asle_intr], non asle set request?? [ 3.048115] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 3.048120] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 3.048123] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 3.048126] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 3.048128] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 3.048130] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 3.048132] [drm:intel_modeset_check_state], [ENCODER:22:TMDS-22] [ 3.048134] [drm:intel_modeset_check_state], [ENCODER:24:TMDS-24] [ 3.048135] [drm:intel_modeset_check_state], [CRTC:3] [ 3.048137] [drm:intel_modeset_check_state], [CRTC:4] [ 3.048140] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 3.048144] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set [ 3.048145] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set [ 3.048148] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 3.048152] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.048154] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch [ 3.048156] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.048158] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 3.048159] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch [ 3.048161] [drm:intel_crtc_set_config], attempting to set mode from userspace [ 3.048164] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.048166] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0 [ 3.048172] [drm:intel_modeset_adjusted_mode], [CRTC:4] [ 3.048513] [drm:i9xx_crtc_mode_set], Mode for pipe B: [ 3.048515] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 3.048516] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking [ 3.072104] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760 [ 3.072106] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 3.072109] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=23, cursor=6, SR: plane=0, cursor=0 [ 3.072112] [drm:intel_crtc_mode_set], [ENCODER:13:DAC-13] set [MODE:31:1024x768] [ 3.072116] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=26, cursor=6, B: plane=23, cursor=6, SR: plane=0, cursor=0 [ 3.088133] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 3.088139] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1] [ 3.088142] [drm:intel_connector_check_state], [CONNECTOR:12:VGA-1] [ 3.088145] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6] [ 3.088147] [drm:intel_modeset_check_state], [ENCODER:13:DAC-13] [ 3.088149] [drm:intel_modeset_check_state], [ENCODER:14:TMDS-14] [ 3.088152] [drm:intel_modeset_check_state], [ENCODER:18:TMDS-18] [ 3.088154] [drm:intel_modeset_check_state], [ENCODER:20:TMDS-20] [ 3.088156] [drm:intel_modeset_check_state], [ENCODER:22:TMDS-22] [ 3.088158] [drm:intel_modeset_check_state], [ENCODER:24:TMDS-24] [ 3.088159] [drm:intel_modeset_check_state], [CRTC:3] [ 3.088161] [drm:intel_modeset_check_state], [CRTC:4] [ 3.088230] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 3.088234] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.088236] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 3.088239] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 3.088242] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.088244] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 3.090453] Console: switching to colour frame buffer device 128x48 [ 3.090457] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 3.090460] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.090461] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 3.090464] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 3.090466] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 3.090467] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 3.092784] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.092815] i915 0000:00:02.0: registered panic notifier [ 3.095267] [drm:intel_opregion_asle_intr], non asle set request?? [ 3.095647] [drm:asle_set_backlight], bclp = 0x800000ff [ 3.095651] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 3.095653] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 [ 3.095656] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 3.095662] [drm:intel_opregion_asle_intr], non asle set request?? [ 3.097814] [drm:intel_opregion_asle_intr], non asle set request?? [ 3.098155] [drm:asle_set_backlight], bclp = 0x800000ff [ 3.098158] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 3.098160] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 [ 3.098162] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 3.098166] [drm:intel_opregion_asle_intr], non asle set request?? [ 3.099345] acpi device:02: registered as cooling_device2 [ 3.099523] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.099652] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 3.100414] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 3.100523] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.100529] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.100571] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.104567] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.104603] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported [ 3.104644] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00 [ 3.116027] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.116129] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.116168] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.116210] usb usb1: Product: EHCI Host Controller [ 3.116239] usb usb1: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 ehci_hcd [ 3.116277] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.116566] hub 1-0:1.0: USB hub found [ 3.116602] hub 1-0:1.0: 6 ports detected [ 3.117199] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.117204] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.117246] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.121227] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.121258] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 3.121289] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000 [ 3.132101] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.133352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.134534] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.135732] usb usb2: Product: EHCI Host Controller [ 3.136946] usb usb2: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 ehci_hcd [ 3.138168] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.139627] hub 2-0:1.0: USB hub found [ 3.140872] hub 2-0:1.0: 6 ports detected [ 3.145458] uhci_hcd: USB Universal Host Controller Interface driver [ 3.146842] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.146847] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.148163] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.149452] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 3.150697] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.151873] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.153055] usb usb3: Product: UHCI Host Controller [ 3.154353] usb usb3: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd [ 3.155609] usb usb3: SerialNumber: 0000:00:1a.0 [ 3.157179] hub 3-0:1.0: USB hub found [ 3.158413] hub 3-0:1.0: 2 ports detected [ 3.159772] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.159778] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.161057] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.162240] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 3.163415] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.164519] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.165634] usb usb4: Product: UHCI Host Controller [ 3.166711] usb usb4: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd [ 3.167803] usb usb4: SerialNumber: 0000:00:1a.1 [ 3.169119] hub 4-0:1.0: USB hub found [ 3.170219] hub 4-0:1.0: 2 ports detected [ 3.171441] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 3.171445] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 3.172557] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 3.173655] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 [ 3.174751] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.175787] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.176845] usb usb5: Product: UHCI Host Controller [ 3.177921] usb usb5: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd [ 3.178982] usb usb5: SerialNumber: 0000:00:1a.2 [ 3.180325] hub 5-0:1.0: USB hub found [ 3.181402] hub 5-0:1.0: 2 ports detected [ 3.182637] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.182642] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.183696] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 3.184857] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 [ 3.186019] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.187096] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.188230] usb usb6: Product: UHCI Host Controller [ 3.189315] usb usb6: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd [ 3.190409] usb usb6: SerialNumber: 0000:00:1d.0 [ 3.191782] hub 6-0:1.0: USB hub found [ 3.192923] hub 6-0:1.0: 2 ports detected [ 3.194197] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.194202] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.195370] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 3.196573] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 [ 3.197877] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.199057] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.200255] usb usb7: Product: UHCI Host Controller [ 3.201433] usb usb7: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd [ 3.202571] usb usb7: SerialNumber: 0000:00:1d.1 [ 3.203946] hub 7-0:1.0: USB hub found [ 3.205122] hub 7-0:1.0: 2 ports detected [ 3.206387] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.206393] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.207547] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 3.208740] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 [ 3.209908] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.210982] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.212095] usb usb8: Product: UHCI Host Controller [ 3.213163] usb usb8: Manufacturer: Linux 3.7.0-rc4-00382-g28c70f1 uhci_hcd [ 3.214267] usb usb8: SerialNumber: 0000:00:1d.2 [ 3.215641] hub 8-0:1.0: USB hub found [ 3.216780] hub 8-0:1.0: 2 ports detected [ 3.326859] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff] [ 3.326869] PM: Marking nosave pages: [mem 0x7c4a1000-0x7c4a6fff] [ 3.326871] PM: Marking nosave pages: [mem 0x7c5b7000-0x7c60efff] [ 3.326875] PM: Marking nosave pages: [mem 0x7c6c6000-0x7c9fefff] [ 3.326905] PM: Basic memory bitmaps created [ 3.339699] PM: Basic memory bitmaps freed [ 3.339710] video LNXVIDEO:00: Restoring backlight state [ 3.341120] [drm:intel_opregion_asle_intr], non asle set request?? [ 3.341618] [drm:asle_set_backlight], bclp = 0x800000ff [ 3.341623] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 3.341626] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 [ 3.341630] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 3.341636] [drm:intel_opregion_asle_intr], non asle set request?? [ 3.357984] PM: Starting manual resume from disk [ 3.359142] PM: Hibernation image partition 8:1 present [ 3.359145] PM: Looking for hibernation image. [ 3.372304] PM: Image not found (code -22) [ 3.372307] PM: Hibernation image not present or could not be loaded. [ 3.444586] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr [ 3.467119] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 3.780037] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 3.928101] irq 16: nobody cared (try booting with the "irqpoll" option) [ 3.929329] Pid: 0, comm: swapper/1 Not tainted 3.7.0-rc4-00382-g28c70f1 #214 [ 3.930481] Call Trace: [ 3.931613] <IRQ> [<ffffffff810d7358>] __report_bad_irq+0x38/0xf0 [ 3.932097] [<ffffffff810dc105>] ? rcu_report_qs_rnp+0x75/0x120 [ 3.932097] [<ffffffff810d7603>] note_interrupt+0x1f3/0x240 [ 3.932097] [<ffffffff810d4b97>] handle_irq_event_percpu+0x147/0x230 [ 3.932097] [<ffffffff810d4cc9>] handle_irq_event+0x49/0x70 [ 3.932097] [<ffffffff810d7df1>] handle_fasteoi_irq+0x61/0x100 [ 3.932097] [<ffffffff81004709>] handle_irq+0x59/0x150 [ 3.932097] [<ffffffff8104d34e>] ? _local_bh_enable+0xe/0x10 [ 3.932097] [<ffffffff8104df11>] ? irq_enter+0x71/0x80 [ 3.932097] [<ffffffff81003dcb>] do_IRQ+0x5b/0xe0 [ 3.932097] [<ffffffff8151e72d>] common_interrupt+0x6d/0x6d [ 3.932097] <EOI> [<ffffffff8109d20c>] ? tick_nohz_idle_enter+0x3c/0x70 [ 3.932097] [<ffffffff8109d208>] ? tick_nohz_idle_enter+0x38/0x70 [ 3.932097] [<ffffffff8100af55>] cpu_idle+0x35/0xf0 [ 3.932097] [<ffffffff81513991>] start_secondary+0x80/0x8f [ 3.932097] handlers: [ 3.932097] [<ffffffffa004b9c0>] usb_hcd_irq [usbcore] [ 3.932097] Disabling IRQ #16 [ 3.977415] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810 [ 3.978626] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.979817] usb 4-1: Product: Fingerprint Sensor [ 4.055107] systemd-readahead-replay[383]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day. [ 4.168964] udevd[410]: starting version 173 [ 4.220043] usb 4-2: new full-speed USB device number 3 using uhci_hcd [ 4.328462] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k [ 4.329499] e1000e: Copyright(c) 1999 - 2012 Intel Corporation. [ 4.330592] e1000e 0000:00:19.0: setting latency timer to 64 [ 4.330769] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.331886] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 4.397409] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 [ 4.397411] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.397413] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II [ 4.397415] usb 4-2: Manufacturer: Lenovo Computer Corp [ 4.401106] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr [ 4.438478] wmi: Mapper loaded [ 4.544347] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 4.544354] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.544357] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 4.544360] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 4.544363] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 4.544365] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 4.570318] mtp-probe[570]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1" [ 4.579199] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6) [ 4.580302] tpm_tis 00:0a: Intel iTPM workaround enabled [ 4.591056] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.593253] ACPI: AC Adapter [AC] (on-line) [ 4.598513] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:16:15:7a:65 [ 4.599707] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.600969] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF [ 4.602880] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 4.613898] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 4.615187] ACPI: Battery Slot [BAT0] (battery present) [ 4.630569] cfg80211: Calling CRDA to update world regulatory domain [ 4.645077] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 4.646412] Copyright(c) 2003-2012 Intel Corporation [ 4.647885] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [ 4.649310] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900049a8000 [ 4.650655] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [ 4.652109] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X [ 4.658574] mtp-probe[570]: bus: 4, device: 2 was not an MTP device [ 4.660071] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 [ 4.661083] hda_codec: CX20561 (Hermosa): BIOS auto-probing. [ 4.662825] ALSA sound/pci/hda/hda_auto_parser.c:318 autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker [ 4.662828] ALSA sound/pci/hda/hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 4.662831] ALSA sound/pci/hda/hda_auto_parser.c:326 hp_outs=2 (0x19/0x16/0x0/0x0/0x0) [ 4.662833] ALSA sound/pci/hda/hda_auto_parser.c:327 mono: mono_out=0x0 [ 4.662835] ALSA sound/pci/hda/hda_auto_parser.c:330 dig-out=0x1c/0x0 [ 4.662837] ALSA sound/pci/hda/hda_auto_parser.c:331 inputs: [ 4.662840] ALSA sound/pci/hda/hda_auto_parser.c:335 Dock Mic=0x17 [ 4.662842] ALSA sound/pci/hda/hda_auto_parser.c:335 Mic=0x18 [ 4.662844] ALSA sound/pci/hda/hda_auto_parser.c:335 Internal Mic=0x1d [ 4.664239] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 4.669808] ALSA sound/pci/hda/patch_conexant.c:4546 hda_codec: Enable sync_write for stable communication [ 4.673734] WARNING! power/level is deprecated; use power/control instead [ 4.678574] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 4.725748] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 4.727355] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 4.729552] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 4.732208] ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20120913/utaddress-251) [ 4.735211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.736857] ACPI Warning: 0x00000000000011b0-0x00000000000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120913/utaddress-251) [ 4.739927] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.740049] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 4.742945] udevd[416]: error opening ATTR{/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/power/level} for writing: No such file or directory [ 4.746387] ACPI Warning: 0x0000000000001180-0x00000000000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20120913/utaddress-251) [ 4.749807] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.751557] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.754469] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt [ 4.792895] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 4.792896] iwldvm: Copyright(c) 2003-2012 Intel Corporation [ 4.793017] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 4.793019] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 4.793020] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 4.793022] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled [ 4.793023] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [ 4.793025] iwlwifi 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 4.793102] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 4.812613] iwlwifi 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4 [ 4.812614] iwlwifi 0000:03:00.0: Device SKU: 0xF0 [ 4.812616] iwlwifi 0000:03:00.0: Valid Tx ant: 0x2, Valid Rx ant: 0x3 [ 4.816818] Registered led device: phy0-led [ 4.817144] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 4.847647] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c [ 4.853545] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 4.855196] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 4.856901] thinkpad_acpi: ThinkPad BIOS 6DET38WW (2.02 ), EC 7XHT21WW-1.03 [ 4.858575] thinkpad_acpi: Lenovo ThinkPad X200s, model 7470BN2 [ 4.860421] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.919291] ifup-sysctl[646]: ifup-sysctl lo -o hotplug [ 4.927392] ifup-sysctl[649]: Applying lo ifsysctl settings [ 4.932328] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 4.934364] thinkpad_acpi: radio switch found; radios are enabled [ 4.936044] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 4.937706] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 4.943585] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it [ 4.945306] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation [ 4.957348] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 4.960716] Registered led device: tpacpi::thinklight [ 4.960811] Registered led device: tpacpi::power [ 4.960865] Registered led device: tpacpi::standby [ 4.960909] Registered led device: tpacpi::thinkvantage [ 4.967484] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 4.973234] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 4.986190] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input12 [ 5.051846] Bluetooth: Core ver 2.16 [ 5.053846] NET: Registered protocol family 31 [ 5.055568] Bluetooth: HCI device and connection manager initialized [ 5.057268] Bluetooth: HCI socket layer initialized [ 5.058900] Bluetooth: L2CAP socket layer initialized [ 5.060484] Bluetooth: SCO socket layer initialized [ 5.075244] iTCO_vendor_support: vendor-support=0 [ 5.085349] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10 [ 5.086936] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) [ 5.089799] udev-configure-printer[703]: add /module/lpc_ich [ 5.094281] udev-configure-printer[703]: Failed to get parent [ 5.102854] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.108888] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c [ 5.113091] usbcore: registered new interface driver btusb [ 5.138092] udev-configure-printer[719]: add /bus/pci/drivers/lpc_ich [ 5.142301] udev-configure-printer[719]: Failed to get parent [ 5.144901] cfg80211: World regulatory domain updated: [ 5.146237] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.147567] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.149005] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.150353] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.151653] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.152952] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.172552] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 5.216702] ifup-sysctl[745]: ifup-sysctl eth0 -o hotplug [ 5.224739] ifup-sysctl[759]: Applying eth0 ifsysctl settings [ 5.227188] ifup-sysctl[761]: ifup-sysctl wlan0 -o hotplug [ 5.231256] ifup-sysctl[766]: Applying wlan0 ifsysctl settings [ 5.248722] Adding 2104476k swap on /dev/sda1. Priority:0 extents:1 across:2104476k SS [ 5.261204] ifup[780]: eth0 -o hotplug [ 5.262595] ifup[782]: wlan0 -o hotplug [ 5.276928] ifup[795]: Service network not started and mode 'auto' -> skipping [ 5.280494] ifup[799]: Service network not started and mode 'auto' -> skipping [ 5.315139] device-mapper: uevent: version 1.0.3 [ 5.316698] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com [ 5.544004] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 [ 5.555840] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 [ 5.629411] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.646199] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 5.667660] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 5.701590] tun: Universal TUN/TAP device driver, 1.6 [ 5.702768] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 6.458827] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6.460173] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 6.668245] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6.669549] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 6.806465] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 7.158015] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 7.260166] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [ 7.260434] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.581044] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 9.584078] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 10.503215] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.505546] Bluetooth: BNEP filters: protocol multicast [ 10.506713] Bluetooth: BNEP socket layer initialized [ 10.618801] Bluetooth: RFCOMM TTY layer initialized [ 10.620094] Bluetooth: RFCOMM socket layer initialized [ 10.621399] Bluetooth: RFCOMM ver 1.11 [ 10.684939] nscd[2037]: segfault at 1 ip 0000000000000001 sp 00007ffff736b7b8 error 14 in libnss_files-2.16.90.so[7f7641154000+c000] [ 11.107126] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 11.107134] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.107137] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 11.107140] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 11.107143] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.107145] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 11.116288] [drm:i915_driver_open], [ 11.116339] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 11.116347] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.116350] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 11.116354] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 11.116358] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.116360] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 11.116428] [drm:i915_driver_open], [ 11.116750] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [ 11.116757] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[7] ENCODERS[7] [ 11.116842] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 11.116847] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 11.116863] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 11.116866] [drm:drm_mode_debug_printmodeline], Modeline 27:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa [ 11.116872] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 11.117694] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.117699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 11.124025] [drm:intel_crt_detect], CRT detected via hotplug [ 11.124179] [drm:gmbus_irq_handler], GMBUS interrupt [ 11.124230] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 11.124236] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.124238] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 11.124240] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 11.124497] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.124499] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 11.176026] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 11.176034] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 11.176037] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 11.176039] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 11.208127] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 11.208133] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 11.208158] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes : [ 11.208161] [drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 11.208165] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 11.208169] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 11.208173] [drm:drm_mode_debug_printmodeline], Modeline 28:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 11.208176] [drm:drm_mode_debug_printmodeline], Modeline 8:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 11.208297] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.208355] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.208360] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 11.208364] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 11.208367] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.208370] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 11.208373] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 11.208396] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 11.208400] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 11.208404] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.208406] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 11.208409] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 11.208412] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 11.208414] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.208416] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 11.208444] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.208448] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 11.208451] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 11.208454] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.208456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 11.208459] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 11.208480] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 11.208484] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] [ 11.208487] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.208489] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected [ 11.208492] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 11.208494] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] [ 11.208497] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.208499] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected [ 11.208521] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 11.208524] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] [ 11.208527] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.208529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected [ 11.208532] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 11.208535] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] [ 11.208537] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.208539] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected [ 11.208585] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 11.208589] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 11.208604] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 11.208606] [drm:drm_mode_debug_printmodeline], Modeline 27:"1440x900" 50 74080 1440 1464 1480 1600 900 903 909 926 0x48 0xa [ 11.208611] [drm:drm_mode_getconnector], [CONNECTOR:5:?] [ 11.210101] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.210106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] [ 11.224037] [drm:intel_crt_detect], CRT detected via hotplug [ 11.224183] [drm:gmbus_irq_handler], GMBUS interrupt [ 11.224204] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1) [ 11.224208] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.224210] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 11.224213] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1 [ 11.224470] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga [ 11.224473] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0 [ 11.276071] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1) [ 11.276079] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 11.276082] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging [ 11.276084] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1 [ 11.308152] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpb [ 11.308156] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0 [ 11.308182] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:VGA-1] probed modes : [ 11.308185] [drm:drm_mode_debug_printmodeline], Modeline 29:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 11.308190] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 11.308194] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 11.308197] [drm:drm_mode_debug_printmodeline], Modeline 28:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 [ 11.308201] [drm:drm_mode_debug_printmodeline], Modeline 8:"640x480" 60 25175 640 656 752 800 480 489 492 525 0x40 0xa [ 11.308792] [drm:drm_mode_getconnector], [CONNECTOR:12:?] [ 11.308982] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.308987] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 11.308991] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 11.308994] [drm:drm_mode_getconnector], [CONNECTOR:15:?] [ 11.308997] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] [ 11.308999] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-1] disconnected [ 11.309019] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 11.309023] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 11.309027] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.309029] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 11.309033] [drm:drm_mode_getconnector], [CONNECTOR:19:?] [ 11.309035] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] [ 11.309037] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.309040] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected [ 11.309059] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.309062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 11.309065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 11.309068] [drm:drm_mode_getconnector], [CONNECTOR:21:?] [ 11.309071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] [ 11.309073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-2] disconnected [ 11.309092] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 11.309096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] [ 11.309099] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.309101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected [ 11.309105] [drm:drm_mode_getconnector], [CONNECTOR:23:?] [ 11.309107] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] [ 11.309110] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.309112] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:23:DP-2] disconnected [ 11.309130] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 11.309134] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] [ 11.309136] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.309139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected [ 11.309142] [drm:drm_mode_getconnector], [CONNECTOR:25:?] [ 11.309144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] [ 11.309147] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.309149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:DP-3] disconnected [ 11.332467] [drm:drm_mode_addfb], [FB:33] [ 11.332540] [drm:drm_mode_setcrtc], [CRTC:3] [ 11.332547] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [ 11.332550] [drm:intel_crtc_set_config], [CRTC:3] [FB:33] #connectors=1 (x y) (0 0) [ 11.332558] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.332561] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 11.359633] [drm:i9xx_update_plane], Writing base 00538000 00000000 0 0 15360 [ 11.368965] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 11.369043] [drm:drm_mode_setcrtc], [CRTC:4] [ 11.369052] [drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1] [ 11.369055] [drm:intel_crtc_set_config], [CRTC:4] [FB:33] #connectors=1 (x y) (0 0) [ 11.369062] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.369065] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 11.369072] [drm:i9xx_update_plane], Writing base 00538000 00000000 0 0 15360 [ 11.376030] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 11.377406] [drm:intel_opregion_asle_intr], non asle set request?? [ 11.377801] [drm:asle_set_backlight], bclp = 0x800000ff [ 11.377806] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 11.377809] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 [ 11.377812] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 11.377818] [drm:intel_opregion_asle_intr], non asle set request?? [ 11.379977] [drm:intel_opregion_asle_intr], non asle set request?? [ 11.380417] [drm:asle_set_backlight], bclp = 0x800000ff [ 11.380421] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 11.380424] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3211215 [ 11.380427] [drm:intel_panel_get_max_backlight], max backlight PWM = 3211215 [ 11.380431] [drm:intel_opregion_asle_intr], non asle set request?? [ 11.394264] [drm:drm_mode_addfb], [FB:34] [ 11.394306] [drm:drm_mode_setcrtc], [CRTC:3] [ 11.394314] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1] [ 11.394317] [drm:intel_crtc_set_config], [CRTC:3] [FB:34] #connectors=1 (x y) (0 0) [ 11.394325] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.394328] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 11.401698] [drm:i9xx_update_plane], Writing base 01938000 00000000 0 0 6144 [ 11.412128] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 11.412190] [drm:drm_mode_setcrtc], [CRTC:4] [ 11.412199] [drm:drm_mode_setcrtc], [CONNECTOR:12:VGA-1] [ 11.412202] [drm:intel_crtc_set_config], [CRTC:4] [FB:34] #connectors=1 (x y) (0 0) [ 11.412211] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 11.412213] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 11.412219] [drm:i9xx_update_plane], Writing base 01938000 00000000 0 0 6144 [ 11.428032] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 11.692905] cgroup: libvirtd (2194) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 11.692992] cgroup: libvirtd (2194) created nested cgroup for controller "freezer" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 11.693071] cgroup: libvirtd (2194) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. [ 12.603288] NET: Registered protocol family 17 [ 19.247046] [drm:intel_crtc_cursor_set], cursor off [ 19.247063] [drm:intel_crtc_cursor_set], cursor off [ 19.256456] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 19.256472] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 19.256476] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 19.256492] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760 [ 19.280080] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 19.280093] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 19.280104] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 19.280108] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 19.280117] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5760 [ 19.288042] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 19.288047] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 19.288051] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 19.288053] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 19.288056] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 19.288058] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 19.288060] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 19.288073] [drm:intel_crtc_set_config], [CRTC:3] [FB:32] #connectors=1 (x y) (0 0) [ 19.288075] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 19.288077] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] [ 19.288079] [drm:intel_crtc_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0) [ 19.288082] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 19.288084] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:VGA-1] to [CRTC:4] ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 13:33 ` Jiri Kosina 2013-03-15 13:33 ` Jiri Kosina @ 2013-03-15 15:14 ` Jiri Kosina 2013-03-15 19:14 ` Yinghai Lu 2013-03-15 15:32 ` Greg KH 2 siblings, 1 reply; 40+ messages in thread From: Jiri Kosina @ 2013-03-15 15:14 UTC (permalink / raw) To: Harald Arnesen Cc: Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, 15 Mar 2013, Jiri Kosina wrote: > > I have the same problem on my Lenovo T500. I think the graphics card is > > involved. > > > > This laptop has "hybrid graphics" - one Intel GMA 4500MHD and one ATI > > Mobility Radeon HD 3650. When I boot with the Intel card, I get "irq 16: > > nobody cared" during boot, not when I boot with the ATI card. > > Confirming this. After a lot of hassle, I have bisected this reliably to > > commit 28c70f162a315bdcfbe0bf940a740ef8bfb918d6 > Author: Daniel Vetter <daniel.vetter@ffwll.ch> > Date: Sat Dec 1 13:53:45 2012 +0100 > > drm/i915: use the gmbus irq for waits > > Adding Daniel, Imre and Daniel to CC while I will try to figure out what's > happening in parallel. > > Attaching dmesg.txt from the machine with 28c70f162a as head, with > drm.debug=0xe. Just a datapoint -- I have put a trivial debugging patch in place, and it reveals that "nobody cared" for irq 16 happens long after last I915_WRITE(GMBUS4 + reg_offset, 0); has been performed in gmbus_wait_hw_status(). On the other hand, if I comment out both GMBUS4 register offset writes in gmbus_wait_hw_status(), then it of course falls back to GPIO bit-banging, but the "nobody cared" for irq 16 is gone. So it seems like something gets severely confused by the I915_WRITE to GMBUS4 + reg_offset. So far this seems to have been reported solely on Lenovos as far as I can see (although a completely different types), so it might be some platform-specific quirk? Honestly, I still don't understand how all the GMBUS stuff relates to IRQ 16 at all. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 15:14 ` Jiri Kosina @ 2013-03-15 19:14 ` Yinghai Lu 2013-03-18 9:12 ` Jiri Kosina 0 siblings, 1 reply; 40+ messages in thread From: Yinghai Lu @ 2013-03-15 19:14 UTC (permalink / raw) To: Jiri Kosina Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, Mar 15, 2013 at 8:14 AM, Jiri Kosina <jkosina@suse.cz> wrote: > Just a datapoint -- I have put a trivial debugging patch in place, and it > reveals that "nobody cared" for irq 16 happens long after last > > I915_WRITE(GMBUS4 + reg_offset, 0); > > has been performed in gmbus_wait_hw_status(). On the other hand, if I > comment out both GMBUS4 register offset writes in gmbus_wait_hw_status(), > then it of course falls back to GPIO bit-banging, but the "nobody cared" > for irq 16 is gone. > > So it seems like something gets severely confused by the I915_WRITE to > GMBUS4 + reg_offset. So far this seems to have been reported solely on > Lenovos as far as I can see (although a completely different types), so it > might be some platform-specific quirk? > > Honestly, I still don't understand how all the GMBUS stuff relates to IRQ > 16 at all. that device is using i915 0000:00:02.0: irq 44 for MSI/MSI-X so can you try to boot with pci=nomsi? ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 19:14 ` Yinghai Lu @ 2013-03-18 9:12 ` Jiri Kosina 2013-03-18 18:57 ` Yinghai Lu 2013-03-18 19:19 ` Daniel Vetter 0 siblings, 2 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-18 9:12 UTC (permalink / raw) To: Yinghai Lu Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, 15 Mar 2013, Yinghai Lu wrote: > > Just a datapoint -- I have put a trivial debugging patch in place, and it > > reveals that "nobody cared" for irq 16 happens long after last > > > > I915_WRITE(GMBUS4 + reg_offset, 0); > > > > has been performed in gmbus_wait_hw_status(). On the other hand, if I > > comment out both GMBUS4 register offset writes in gmbus_wait_hw_status(), > > then it of course falls back to GPIO bit-banging, but the "nobody cared" > > for irq 16 is gone. > > > > So it seems like something gets severely confused by the I915_WRITE to > > GMBUS4 + reg_offset. So far this seems to have been reported solely on > > Lenovos as far as I can see (although a completely different types), so it > > might be some platform-specific quirk? > > > > Honestly, I still don't understand how all the GMBUS stuff relates to IRQ > > 16 at all. > > that device is using > i915 0000:00:02.0: irq 44 for MSI/MSI-X > > so can you try to boot with pci=nomsi? Yes, switching from MSI to IO-APIC-fasteoi makes the report about lost interrupts go away. My understanding from the other mail is that DAniel Vetter already has an idea what might be going wrong with IRQ acking on GM45 chipsets; hopefully this datapoint regarding MSI will fit into it. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-18 9:12 ` Jiri Kosina @ 2013-03-18 18:57 ` Yinghai Lu 2013-03-18 22:05 ` Jiri Kosina 2013-03-18 19:19 ` Daniel Vetter 1 sibling, 1 reply; 40+ messages in thread From: Yinghai Lu @ 2013-03-18 18:57 UTC (permalink / raw) To: Jiri Kosina Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Mon, Mar 18, 2013 at 2:12 AM, Jiri Kosina <jkosina@suse.cz> wrote: > On Fri, 15 Mar 2013, Yinghai Lu wrote: > >> > Just a datapoint -- I have put a trivial debugging patch in place, and it >> > reveals that "nobody cared" for irq 16 happens long after last >> > >> > I915_WRITE(GMBUS4 + reg_offset, 0); >> > >> > has been performed in gmbus_wait_hw_status(). On the other hand, if I >> > comment out both GMBUS4 register offset writes in gmbus_wait_hw_status(), >> > then it of course falls back to GPIO bit-banging, but the "nobody cared" >> > for irq 16 is gone. >> > >> > So it seems like something gets severely confused by the I915_WRITE to >> > GMBUS4 + reg_offset. So far this seems to have been reported solely on >> > Lenovos as far as I can see (although a completely different types), so it >> > might be some platform-specific quirk? >> > >> > Honestly, I still don't understand how all the GMBUS stuff relates to IRQ >> > 16 at all. >> >> that device is using >> i915 0000:00:02.0: irq 44 for MSI/MSI-X >> >> so can you try to boot with pci=nomsi? > > Yes, switching from MSI to IO-APIC-fasteoi makes the report about lost > interrupts go away. > > My understanding from the other mail is that DAniel Vetter already has an > idea what might be going wrong with IRQ acking on GM45 chipsets; hopefully > this datapoint regarding MSI will fit into it. What is /proc/interrupts difference between with and without pci=nomsi ? drm is forced to share irq 16? Thanks Yinghai ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-18 18:57 ` Yinghai Lu @ 2013-03-18 22:05 ` Jiri Kosina 2013-03-18 22:50 ` Yinghai Lu 0 siblings, 1 reply; 40+ messages in thread From: Jiri Kosina @ 2013-03-18 22:05 UTC (permalink / raw) To: Yinghai Lu Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Mon, 18 Mar 2013, Yinghai Lu wrote: > > Yes, switching from MSI to IO-APIC-fasteoi makes the report about lost > > interrupts go away. > > > > My understanding from the other mail is that DAniel Vetter already has an > > idea what might be going wrong with IRQ acking on GM45 chipsets; hopefully > > this datapoint regarding MSI will fit into it. > > What is /proc/interrupts difference between with and without pci=nomsi ? > > drm is forced to share irq 16? Yup, IRQ 16 is being shared, and one of the owners is i915. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-18 22:05 ` Jiri Kosina @ 2013-03-18 22:50 ` Yinghai Lu 0 siblings, 0 replies; 40+ messages in thread From: Yinghai Lu @ 2013-03-18 22:50 UTC (permalink / raw) To: Jiri Kosina Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Mon, Mar 18, 2013 at 3:05 PM, Jiri Kosina <jkosina@suse.cz> wrote: > On Mon, 18 Mar 2013, Yinghai Lu wrote: > >> > Yes, switching from MSI to IO-APIC-fasteoi makes the report about lost >> > interrupts go away. >> > >> > My understanding from the other mail is that DAniel Vetter already has an >> > idea what might be going wrong with IRQ acking on GM45 chipsets; hopefully >> > this datapoint regarding MSI will fit into it. >> >> What is /proc/interrupts difference between with and without pci=nomsi ? >> >> drm is forced to share irq 16? > > Yup, IRQ 16 is being shared, and one of the owners is i915. the vga report strange INTx status... 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 20e4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0100c Data: 4142 Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: i915 Kernel modules: i915 it should be INTx-, after we have set DisINTx+ in control. So INTx can not be disabled after it get enabled before ? the VGA on my T420 looks right. 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 21ce Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Thanks Yinghai ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-18 9:12 ` Jiri Kosina 2013-03-18 18:57 ` Yinghai Lu @ 2013-03-18 19:19 ` Daniel Vetter 2013-03-18 19:57 ` Chris Wilson 2013-03-18 22:04 ` Jiri Kosina 1 sibling, 2 replies; 40+ messages in thread From: Daniel Vetter @ 2013-03-18 19:19 UTC (permalink / raw) To: Jiri Kosina Cc: Yinghai Lu, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Mon, Mar 18, 2013 at 10:12:49AM +0100, Jiri Kosina wrote: > On Fri, 15 Mar 2013, Yinghai Lu wrote: > > > > Just a datapoint -- I have put a trivial debugging patch in place, and it > > > reveals that "nobody cared" for irq 16 happens long after last > > > > > > I915_WRITE(GMBUS4 + reg_offset, 0); > > > > > > has been performed in gmbus_wait_hw_status(). On the other hand, if I > > > comment out both GMBUS4 register offset writes in gmbus_wait_hw_status(), > > > then it of course falls back to GPIO bit-banging, but the "nobody cared" > > > for irq 16 is gone. > > > > > > So it seems like something gets severely confused by the I915_WRITE to > > > GMBUS4 + reg_offset. So far this seems to have been reported solely on > > > Lenovos as far as I can see (although a completely different types), so it > > > might be some platform-specific quirk? > > > > > > Honestly, I still don't understand how all the GMBUS stuff relates to IRQ > > > 16 at all. > > > > that device is using > > i915 0000:00:02.0: irq 44 for MSI/MSI-X > > > > so can you try to boot with pci=nomsi? > > Yes, switching from MSI to IO-APIC-fasteoi makes the report about lost > interrupts go away. > > My understanding from the other mail is that DAniel Vetter already has an > idea what might be going wrong with IRQ acking on GM45 chipsets; hopefully > this datapoint regarding MSI will fit into it. Yep, there's a big comment in the irq handler for that chipset that we have a gaping race with when using MSI interrupts. Although the comment bodly claims that the race is small enough to avoid the dreaded "nobody cared" message. Looks like gmbus is good at hitting that race - on newer chips it already brought up a similar race in handling pch interrupts. Can you please give the below patch a whirl? It removes the probably race msi race avoidance code and replaces it with the same trick Paulo used to fix pch irq handling races. Thanks, Daniel --- diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 3c7bb04..13de12e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2684,7 +2684,7 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 iir, new_iir; + u32 iir, new_iir, ier; u32 pipe_stats[I915_MAX_PIPES]; unsigned long irqflags; int irq_received; @@ -2692,9 +2692,14 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) atomic_inc(&dev_priv->irq_received); + /* irq race avoidance, copy&pasta from Paulo's PCH irq fix */ + ier = I915_READ(IER); + I915_WRITE(IER, 0); + POSTING_READ(IER); + iir = I915_READ(IIR); - for (;;) { + do { bool blc_event = false; irq_received = iir != 0; @@ -2792,7 +2797,10 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) * stray interrupts. */ iir = new_iir; - } + } while (0); + + I915_WRITE(IER, ier); + POSTING_READ(IER); i915_update_dri1_breadcrumb(dev); -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-18 19:19 ` Daniel Vetter @ 2013-03-18 19:57 ` Chris Wilson 2013-03-18 22:04 ` Jiri Kosina 1 sibling, 0 replies; 40+ messages in thread From: Chris Wilson @ 2013-03-18 19:57 UTC (permalink / raw) To: Jiri Kosina, Yinghai Lu, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Imre Deak, Daniel Kurtz, dri-devel On Mon, Mar 18, 2013 at 08:19:03PM +0100, Daniel Vetter wrote: > On Mon, Mar 18, 2013 at 10:12:49AM +0100, Jiri Kosina wrote: > > On Fri, 15 Mar 2013, Yinghai Lu wrote: > > > > > > Just a datapoint -- I have put a trivial debugging patch in place, and it > > > > reveals that "nobody cared" for irq 16 happens long after last > > > > > > > > I915_WRITE(GMBUS4 + reg_offset, 0); > > > > > > > > has been performed in gmbus_wait_hw_status(). On the other hand, if I > > > > comment out both GMBUS4 register offset writes in gmbus_wait_hw_status(), > > > > then it of course falls back to GPIO bit-banging, but the "nobody cared" > > > > for irq 16 is gone. > > > > > > > > So it seems like something gets severely confused by the I915_WRITE to > > > > GMBUS4 + reg_offset. So far this seems to have been reported solely on > > > > Lenovos as far as I can see (although a completely different types), so it > > > > might be some platform-specific quirk? > > > > > > > > Honestly, I still don't understand how all the GMBUS stuff relates to IRQ > > > > 16 at all. > > > > > > that device is using > > > i915 0000:00:02.0: irq 44 for MSI/MSI-X > > > > > > so can you try to boot with pci=nomsi? > > > > Yes, switching from MSI to IO-APIC-fasteoi makes the report about lost > > interrupts go away. > > > > My understanding from the other mail is that DAniel Vetter already has an > > idea what might be going wrong with IRQ acking on GM45 chipsets; hopefully > > this datapoint regarding MSI will fit into it. > > Yep, there's a big comment in the irq handler for that chipset that we > have a gaping race with when using MSI interrupts. Although the comment > bodly claims that the race is small enough to avoid the dreaded "nobody > cared" message. Looks like gmbus is good at hitting that race - on newer > chips it already brought up a similar race in handling pch interrupts. > > Can you please give the below patch a whirl? It removes the probably race > msi race avoidance code and replaces it with the same trick Paulo used to > fix pch irq handling races. Still nobody cares about irq16. -Chris -- Chris Wilson, Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-18 19:19 ` Daniel Vetter 2013-03-18 19:57 ` Chris Wilson @ 2013-03-18 22:04 ` Jiri Kosina 1 sibling, 0 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-18 22:04 UTC (permalink / raw) To: Daniel Vetter Cc: Yinghai Lu, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Mon, 18 Mar 2013, Daniel Vetter wrote: > Yep, there's a big comment in the irq handler for that chipset that we > have a gaping race with when using MSI interrupts. Although the comment > bodly claims that the race is small enough to avoid the dreaded "nobody > cared" message. Looks like gmbus is good at hitting that race - on newer > chips it already brought up a similar race in handling pch interrupts. I see ... will target my focus in that direction, thanks. > Can you please give the below patch a whirl? It removes the probably race > msi race avoidance code and replaces it with the same trick Paulo used to > fix pch irq handling races. Unfortunately it didn't change anything, the spurious interrupt report is still there. -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 13:33 ` Jiri Kosina 2013-03-15 13:33 ` Jiri Kosina 2013-03-15 15:14 ` Jiri Kosina @ 2013-03-15 15:32 ` Greg KH 2013-03-15 15:37 ` Jiri Kosina 2 siblings, 1 reply; 40+ messages in thread From: Greg KH @ 2013-03-15 15:32 UTC (permalink / raw) To: Jiri Kosina Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, Mar 15, 2013 at 02:33:13PM +0100, Jiri Kosina wrote: > On Fri, 15 Mar 2013, Harald Arnesen wrote: > > > I have the same problem on my Lenovo T500. I think the graphics card is > > involved. > > > > This laptop has "hybrid graphics" - one Intel GMA 4500MHD and one ATI > > Mobility Radeon HD 3650. When I boot with the Intel card, I get "irq 16: > > nobody cared" during boot, not when I boot with the ATI card. > > Confirming this. After a lot of hassle, I have bisected this reliably to > > commit 28c70f162a315bdcfbe0bf940a740ef8bfb918d6 > Author: Daniel Vetter <daniel.vetter@ffwll.ch> > Date: Sat Dec 1 13:53:45 2012 +0100 > > drm/i915: use the gmbus irq for waits > > Adding Daniel, Imre and Daniel to CC while I will try to figure out what's > happening in parallel. Wasn't this fixed by the merge from David (2cc79544bd0aabb4b3cf467ead5df526d9134c64)? I can't figure out the exact commit that the merge message referred to though... greg k-h ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 15:32 ` Greg KH @ 2013-03-15 15:37 ` Jiri Kosina 2013-03-15 15:47 ` Greg KH 0 siblings, 1 reply; 40+ messages in thread From: Jiri Kosina @ 2013-03-15 15:37 UTC (permalink / raw) To: Greg KH Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, 15 Mar 2013, Greg KH wrote: > > > I have the same problem on my Lenovo T500. I think the graphics card is > > > involved. > > > > > > This laptop has "hybrid graphics" - one Intel GMA 4500MHD and one ATI > > > Mobility Radeon HD 3650. When I boot with the Intel card, I get "irq 16: > > > nobody cared" during boot, not when I boot with the ATI card. > > > > Confirming this. After a lot of hassle, I have bisected this reliably to > > > > commit 28c70f162a315bdcfbe0bf940a740ef8bfb918d6 > > Author: Daniel Vetter <daniel.vetter@ffwll.ch> > > Date: Sat Dec 1 13:53:45 2012 +0100 > > > > drm/i915: use the gmbus irq for waits > > > > Adding Daniel, Imre and Daniel to CC while I will try to figure out what's > > happening in parallel. > > Wasn't this fixed by the merge from David > (2cc79544bd0aabb4b3cf467ead5df526d9134c64)? Why do you think it should, please? (I am seeing this with a2362d247 still). -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 15:37 ` Jiri Kosina @ 2013-03-15 15:47 ` Greg KH 2013-03-15 16:21 ` Jiri Kosina 2013-03-18 8:21 ` Daniel Vetter 0 siblings, 2 replies; 40+ messages in thread From: Greg KH @ 2013-03-15 15:47 UTC (permalink / raw) To: Jiri Kosina Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, Mar 15, 2013 at 04:37:56PM +0100, Jiri Kosina wrote: > On Fri, 15 Mar 2013, Greg KH wrote: > > > > > I have the same problem on my Lenovo T500. I think the graphics card is > > > > involved. > > > > > > > > This laptop has "hybrid graphics" - one Intel GMA 4500MHD and one ATI > > > > Mobility Radeon HD 3650. When I boot with the Intel card, I get "irq 16: > > > > nobody cared" during boot, not when I boot with the ATI card. > > > > > > Confirming this. After a lot of hassle, I have bisected this reliably to > > > > > > commit 28c70f162a315bdcfbe0bf940a740ef8bfb918d6 > > > Author: Daniel Vetter <daniel.vetter@ffwll.ch> > > > Date: Sat Dec 1 13:53:45 2012 +0100 > > > > > > drm/i915: use the gmbus irq for waits > > > > > > Adding Daniel, Imre and Daniel to CC while I will try to figure out what's > > > happening in parallel. > > > > Wasn't this fixed by the merge from David > > (2cc79544bd0aabb4b3cf467ead5df526d9134c64)? > > Why do you think it should, please? The line: - Fix PCH irq handling race which resulted in missed gmbus/dp aux irqs and subsequent fallout (Paulo) > (I am seeing this with a2362d247 still). Ok, I guess it isn't still fixed properly, just was guessing :) greg k-h ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 15:47 ` Greg KH @ 2013-03-15 16:21 ` Jiri Kosina 2013-03-18 8:21 ` Daniel Vetter 1 sibling, 0 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-15 16:21 UTC (permalink / raw) To: Greg KH Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, 15 Mar 2013, Greg KH wrote: > > > > > I have the same problem on my Lenovo T500. I think the graphics card is > > > > > involved. > > > > > > > > > > This laptop has "hybrid graphics" - one Intel GMA 4500MHD and one ATI > > > > > Mobility Radeon HD 3650. When I boot with the Intel card, I get "irq 16: > > > > > nobody cared" during boot, not when I boot with the ATI card. > > > > > > > > Confirming this. After a lot of hassle, I have bisected this reliably to > > > > > > > > commit 28c70f162a315bdcfbe0bf940a740ef8bfb918d6 > > > > Author: Daniel Vetter <daniel.vetter@ffwll.ch> > > > > Date: Sat Dec 1 13:53:45 2012 +0100 > > > > > > > > drm/i915: use the gmbus irq for waits > > > > > > > > Adding Daniel, Imre and Daniel to CC while I will try to figure out what's > > > > happening in parallel. > > > > > > Wasn't this fixed by the merge from David > > > (2cc79544bd0aabb4b3cf467ead5df526d9134c64)? > > > > Why do you think it should, please? > > The line: > - Fix PCH irq handling race which resulted in missed gmbus/dp > aux irqs and subsequent fallout (Paulo) Ah, that one. I believe that should be irrelevant for GM chipsets, as they don't have AUX line, right? > > (I am seeing this with a2362d247 still). > > Ok, I guess it isn't still fixed properly, just was guessing :) Seems like this is a different issue. Thanks, -- Jiri Kosina SUSE Labs ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-15 15:47 ` Greg KH 2013-03-15 16:21 ` Jiri Kosina @ 2013-03-18 8:21 ` Daniel Vetter 2013-03-18 15:56 ` [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) Jiri Kosina 1 sibling, 1 reply; 40+ messages in thread From: Daniel Vetter @ 2013-03-18 8:21 UTC (permalink / raw) To: Greg KH Cc: Jiri Kosina, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Fri, Mar 15, 2013 at 08:47:39AM -0700, Greg KH wrote: > On Fri, Mar 15, 2013 at 04:37:56PM +0100, Jiri Kosina wrote: > > On Fri, 15 Mar 2013, Greg KH wrote: > > > > > > > I have the same problem on my Lenovo T500. I think the graphics card is > > > > > involved. > > > > > > > > > > This laptop has "hybrid graphics" - one Intel GMA 4500MHD and one ATI > > > > > Mobility Radeon HD 3650. When I boot with the Intel card, I get "irq 16: > > > > > nobody cared" during boot, not when I boot with the ATI card. > > > > > > > > Confirming this. After a lot of hassle, I have bisected this reliably to > > > > > > > > commit 28c70f162a315bdcfbe0bf940a740ef8bfb918d6 > > > > Author: Daniel Vetter <daniel.vetter@ffwll.ch> > > > > Date: Sat Dec 1 13:53:45 2012 +0100 > > > > > > > > drm/i915: use the gmbus irq for waits > > > > > > > > Adding Daniel, Imre and Daniel to CC while I will try to figure out what's > > > > happening in parallel. > > > > > > Wasn't this fixed by the merge from David > > > (2cc79544bd0aabb4b3cf467ead5df526d9134c64)? > > > > Why do you think it should, please? > > The line: > - Fix PCH irq handling race which resulted in missed gmbus/dp > aux irqs and subsequent fallout (Paulo) > > > (I am seeing this with a2362d247 still). > > Ok, I guess it isn't still fixed properly, just was guessing :) Yeah, the above fix is for pch split platforms, whereas these reports here are for gm45 (which doesn't have the pch display split). Acking of gmbus interrupts works differently on those, I'm testing right now whether I can reproduce this fail. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 40+ messages in thread
* [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) 2013-03-18 8:21 ` Daniel Vetter @ 2013-03-18 15:56 ` Jiri Kosina 2013-03-18 17:04 ` Chris Wilson 2013-03-18 19:21 ` Daniel Vetter 0 siblings, 2 replies; 40+ messages in thread From: Jiri Kosina @ 2013-03-18 15:56 UTC (permalink / raw) To: Daniel Vetter, Chris Wilson Cc: Greg KH, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel Okay, so I think that for 3.9 we want the patch below, and if eventually hardware root cause / workaround is found for GM45, we can have it merged later. From: Jiri Kosina <jkosina@suse.cz> Subject: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to using GMBUS irqs instead of GPIO bit-banging for chipset generations 4 and above. It turns out though that on many systems this leads to spurious interrupts being generated, long after the register write to disable the IRQs has been issued. Flushing of the register writes by POSTING_READ() directly after the register write doesn't work either. Disable using of GMBUS IRQs on Gen4 systems before the root cause is found and revert back to old behavior. Also be more careful about not issuing GMBUS4 register reads in gmbus_wait_hw_status() if we are not using GMBUS IRQs. Signed-off-by: Jiri Kosina <jkosina@suse.cz> --- drivers/gpu/drm/i915/intel_i2c.c | 12 ++++++++++-- 1 files changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index acf8aec..8638036 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -58,12 +58,14 @@ to_intel_gmbus(struct i2c_adapter *i2c) return container_of(i2c, struct intel_gmbus, adapter); } +#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) void intel_i2c_reset(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0); - I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); + if (HAS_GMBUS_IRQ(dev)) + I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); } static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable) @@ -203,7 +205,6 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin) algo->data = bus; } -#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4) static int gmbus_wait_hw_status(struct drm_i915_private *dev_priv, u32 gmbus2_status, @@ -214,6 +215,13 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, u32 gmbus2 = 0; DEFINE_WAIT(wait); + if (!HAS_GMBUS_IRQ(dev_priv->dev)) { + int ret; + ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) & + (GMBUS_SATOER | gmbus2_status), + 50); + return ret; + } /* Important: The hw handles only the first bit, so set only one! Since * we also need to check for NAKs besides the hw ready/idle signal, we * need to wake up periodically and check that ourselves. */ -- Jiri Kosina SUSE Labs ^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) 2013-03-18 15:56 ` [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) Jiri Kosina @ 2013-03-18 17:04 ` Chris Wilson 2013-03-19 8:56 ` Jiri Kosina 2013-03-18 19:21 ` Daniel Vetter 1 sibling, 1 reply; 40+ messages in thread From: Chris Wilson @ 2013-03-18 17:04 UTC (permalink / raw) To: Jiri Kosina Cc: Daniel Vetter, Greg KH, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Mon, Mar 18, 2013 at 04:56:02PM +0100, Jiri Kosina wrote: > Okay, so I think that for 3.9 we want the patch below, and if eventually > hardware root cause / workaround is found for GM45, we can have it merged > later. > > > > From: Jiri Kosina <jkosina@suse.cz> > Subject: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips > > Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to > using GMBUS irqs instead of GPIO bit-banging for chipset generations 4 > and above. > > It turns out though that on many systems this leads to spurious interrupts > being generated, long after the register write to disable the IRQs has been > issued. > > Flushing of the register writes by POSTING_READ() directly after the register > write doesn't work either. > > Disable using of GMBUS IRQs on Gen4 systems before the root cause is found and > revert back to old behavior. > > Also be more careful about not issuing GMBUS4 register reads in > gmbus_wait_hw_status() if we are not using GMBUS IRQs. > > Signed-off-by: Jiri Kosina <jkosina@suse.cz> > --- > drivers/gpu/drm/i915/intel_i2c.c | 12 ++++++++++-- > 1 files changed, 10 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c > index acf8aec..8638036 100644 > --- a/drivers/gpu/drm/i915/intel_i2c.c > +++ b/drivers/gpu/drm/i915/intel_i2c.c > @@ -58,12 +58,14 @@ to_intel_gmbus(struct i2c_adapter *i2c) > return container_of(i2c, struct intel_gmbus, adapter); > } > > +#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) > void > intel_i2c_reset(struct drm_device *dev) > { > struct drm_i915_private *dev_priv = dev->dev_private; > I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0); > - I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); > + if (HAS_GMBUS_IRQ(dev)) > + I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); There should not be any harm in always clearing GMBUS4, it exists on all platforms. > } > > static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable) > @@ -203,7 +205,6 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin) > algo->data = bus; > } > > -#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4) > static int > gmbus_wait_hw_status(struct drm_i915_private *dev_priv, > u32 gmbus2_status, > @@ -214,6 +215,13 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, > u32 gmbus2 = 0; > DEFINE_WAIT(wait); > > + if (!HAS_GMBUS_IRQ(dev_priv->dev)) { > + int ret; > + ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) & > + (GMBUS_SATOER | gmbus2_status), > + 50); This should couple up to the normal return code that chooses the appropriate return value based on gmbus2. How about just using: if (!HAS_GMBUS_IRQ(dev_priv->dev)) gmbus4_irq_en = 0; and the existing wait loop? > + return ret; > + } > /* Important: The hw handles only the first bit, so set only one! Since > * we also need to check for NAKs besides the hw ready/idle signal, we > * need to wake up periodically and check that ourselves. */ -- Chris Wilson, Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) 2013-03-18 17:04 ` Chris Wilson @ 2013-03-19 8:56 ` Jiri Kosina 2013-03-19 9:03 ` Chris Wilson 0 siblings, 1 reply; 40+ messages in thread From: Jiri Kosina @ 2013-03-19 8:56 UTC (permalink / raw) To: Chris Wilson Cc: Daniel Vetter, Greg KH, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Mon, 18 Mar 2013, Chris Wilson wrote: > > +#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) > > void > > intel_i2c_reset(struct drm_device *dev) > > { > > struct drm_i915_private *dev_priv = dev->dev_private; > > I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0); > > - I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); > > + if (HAS_GMBUS_IRQ(dev)) > > + I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); > > There should not be any harm in always clearing GMBUS4, it exists on all > platforms. > > > } > > > > static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable) > > @@ -203,7 +205,6 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin) > > algo->data = bus; > > } > > > > -#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4) > > static int > > gmbus_wait_hw_status(struct drm_i915_private *dev_priv, > > u32 gmbus2_status, > > @@ -214,6 +215,13 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, > > u32 gmbus2 = 0; > > DEFINE_WAIT(wait); > > > > + if (!HAS_GMBUS_IRQ(dev_priv->dev)) { > > + int ret; > > + ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) & > > + (GMBUS_SATOER | gmbus2_status), > > + 50); > > This should couple up to the normal return code that chooses the > appropriate return value based on gmbus2. > > How about just using: > if (!HAS_GMBUS_IRQ(dev_priv->dev)) gmbus4_irq_en = 0; > and the existing wait loop? I explicitly wanted to avoid touching GMBUS4 register, as the real cause of the failure is not clear. But, as Yinghai Lu points out, the problem is most likely caused by interrupt disabling not working properly (see his very good point regarding DisINTx+ and INTx+ discrepancy), so zeroing the register out should work .... and it indeed does in my case, hence the (tested) patch below. I think it's a 3.9-rc material, and I am all open to debug this further for 3.10 so that the race is closed and gmbus irqs can be used on Gen4 platform properly. From: Jiri Kosina <jkosina@suse.cz> Subject: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to using GMBUS irqs instead of GPIO bit-banging for chipset generations 4 and above. It turns out though that on many systems this leads to spurious interrupts being generated, long after the register write to disable the IRQs has been issued. Flushing of the register writes by POSTING_READ() directly after the register write doesn't work either. Disable using of GMBUS IRQs on Gen4 systems before the root cause is found and revert back to old behavior. Signed-off-by: Jiri Kosina <jkosina@suse.cz> --- drivers/gpu/drm/i915/intel_i2c.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index acf8aec..9934724 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -203,7 +203,7 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin) algo->data = bus; } -#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4) +#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) static int gmbus_wait_hw_status(struct drm_i915_private *dev_priv, u32 gmbus2_status, @@ -214,6 +214,8 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, u32 gmbus2 = 0; DEFINE_WAIT(wait); + if (!HAS_GMBUS_IRQ(dev_priv->dev)) + gmbus4_irq_en = 0; /* Important: The hw handles only the first bit, so set only one! Since * we also need to check for NAKs besides the hw ready/idle signal, we * need to wake up periodically and check that ourselves. */ -- Jiri Kosina SUSE Labs ^ permalink raw reply related [flat|nested] 40+ messages in thread
* Re: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) 2013-03-19 8:56 ` Jiri Kosina @ 2013-03-19 9:03 ` Chris Wilson 0 siblings, 0 replies; 40+ messages in thread From: Chris Wilson @ 2013-03-19 9:03 UTC (permalink / raw) To: Jiri Kosina Cc: Daniel Vetter, Greg KH, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Tue, Mar 19, 2013 at 09:56:57AM +0100, Jiri Kosina wrote: > On Mon, 18 Mar 2013, Chris Wilson wrote: > > > > +#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) > > > void > > > intel_i2c_reset(struct drm_device *dev) > > > { > > > struct drm_i915_private *dev_priv = dev->dev_private; > > > I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0); > > > - I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); > > > + if (HAS_GMBUS_IRQ(dev)) > > > + I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); > > > > There should not be any harm in always clearing GMBUS4, it exists on all > > platforms. > > > > > } > > > > > > static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable) > > > @@ -203,7 +205,6 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin) > > > algo->data = bus; > > > } > > > > > > -#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4) > > > static int > > > gmbus_wait_hw_status(struct drm_i915_private *dev_priv, > > > u32 gmbus2_status, > > > @@ -214,6 +215,13 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, > > > u32 gmbus2 = 0; > > > DEFINE_WAIT(wait); > > > > > > + if (!HAS_GMBUS_IRQ(dev_priv->dev)) { > > > + int ret; > > > + ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) & > > > + (GMBUS_SATOER | gmbus2_status), > > > + 50); > > > > This should couple up to the normal return code that chooses the > > appropriate return value based on gmbus2. > > > > How about just using: > > if (!HAS_GMBUS_IRQ(dev_priv->dev)) gmbus4_irq_en = 0; > > and the existing wait loop? > > I explicitly wanted to avoid touching GMBUS4 register, as the real cause > of the failure is not clear. > > But, as Yinghai Lu points out, the problem is most likely caused by > interrupt disabling not working properly (see his very good point > regarding DisINTx+ and INTx+ discrepancy), so zeroing the register out > should work .... and it indeed does in my case, hence the (tested) patch > below. > > I think it's a 3.9-rc material, and I am all open to debug this further > for 3.10 so that the race is closed and gmbus irqs can be used on Gen4 > platform properly. Agreed. Using the IRQ for GMBUS is just a performance feature that can be deferred until after we determine the root cause - and hope that the failure is somehow peculiar to GMBUS. Acked-by: Chris Wilson <chris@chris-wilson.co.uk> -Chris -- Chris Wilson, Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) 2013-03-18 15:56 ` [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) Jiri Kosina 2013-03-18 17:04 ` Chris Wilson @ 2013-03-18 19:21 ` Daniel Vetter 1 sibling, 0 replies; 40+ messages in thread From: Daniel Vetter @ 2013-03-18 19:21 UTC (permalink / raw) To: Jiri Kosina Cc: Daniel Vetter, Chris Wilson, Greg KH, Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Thomas Meyer, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel On Mon, Mar 18, 2013 at 04:56:02PM +0100, Jiri Kosina wrote: > Okay, so I think that for 3.9 we want the patch below, and if eventually > hardware root cause / workaround is found for GM45, we can have it merged > later. I'd prefer if we dig into this for a bit more. I've been traveling last week and only just now recovered from the mail backlog, hence my delays in handling this. Also the "nobody cared" showing up only very late after the last gmbus transaction isn't too surprising: It only fires after 100k interrupts, and apparently the irq handler is already a bit racy, so any interrupt might push it over the edge. gmbus interrupts are apparently just help to expose the race (presuming it's indeed the msi race already docuemented in the code). -Daniel > From: Jiri Kosina <jkosina@suse.cz> > Subject: [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips > > Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to > using GMBUS irqs instead of GPIO bit-banging for chipset generations 4 > and above. > > It turns out though that on many systems this leads to spurious interrupts > being generated, long after the register write to disable the IRQs has been > issued. > > Flushing of the register writes by POSTING_READ() directly after the register > write doesn't work either. > > Disable using of GMBUS IRQs on Gen4 systems before the root cause is found and > revert back to old behavior. > > Also be more careful about not issuing GMBUS4 register reads in > gmbus_wait_hw_status() if we are not using GMBUS IRQs. > > Signed-off-by: Jiri Kosina <jkosina@suse.cz> > --- > drivers/gpu/drm/i915/intel_i2c.c | 12 ++++++++++-- > 1 files changed, 10 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c > index acf8aec..8638036 100644 > --- a/drivers/gpu/drm/i915/intel_i2c.c > +++ b/drivers/gpu/drm/i915/intel_i2c.c > @@ -58,12 +58,14 @@ to_intel_gmbus(struct i2c_adapter *i2c) > return container_of(i2c, struct intel_gmbus, adapter); > } > > +#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5) > void > intel_i2c_reset(struct drm_device *dev) > { > struct drm_i915_private *dev_priv = dev->dev_private; > I915_WRITE(dev_priv->gpio_mmio_base + GMBUS0, 0); > - I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); > + if (HAS_GMBUS_IRQ(dev)) > + I915_WRITE(dev_priv->gpio_mmio_base + GMBUS4, 0); > } > > static void intel_i2c_quirk_set(struct drm_i915_private *dev_priv, bool enable) > @@ -203,7 +205,6 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin) > algo->data = bus; > } > > -#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 4) > static int > gmbus_wait_hw_status(struct drm_i915_private *dev_priv, > u32 gmbus2_status, > @@ -214,6 +215,13 @@ gmbus_wait_hw_status(struct drm_i915_private *dev_priv, > u32 gmbus2 = 0; > DEFINE_WAIT(wait); > > + if (!HAS_GMBUS_IRQ(dev_priv->dev)) { > + int ret; > + ret = wait_for((gmbus2 = I915_READ(GMBUS2 + reg_offset)) & > + (GMBUS_SATOER | gmbus2_status), > + 50); > + return ret; > + } > /* Important: The hw handles only the first bit, so set only one! Since > * we also need to check for NAKs besides the hw ready/idle signal, we > * need to wake up periodically and check that ourselves. */ > > -- > Jiri Kosina > SUSE Labs -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) 2013-03-13 21:35 ` Jiri Kosina 2013-03-14 14:51 ` Alan Stern @ 2013-03-14 18:48 ` Yinghai Lu 1 sibling, 0 replies; 40+ messages in thread From: Yinghai Lu @ 2013-03-14 18:48 UTC (permalink / raw) To: Jiri Kosina Cc: Peter Hurley, Thomas Meyer, Shawn Starr, Alan Stern, Kernel development list, USB list, linux-acpi, Rafael J. Wysocki, Bjorn Helgaas, linux-pci On Wed, Mar 13, 2013 at 2:35 PM, Jiri Kosina <jkosina@suse.cz> wrote: > OK, this is a "me too", on Thinkpad x200s. > > [ 4.116847] irq 16: nobody cared (try booting with the "irqpoll" option) > [ 4.116849] Pid: 1, comm: systemd Not tainted 3.9.0-rc2-00188-g6c23cbb #186 > [ 4.116850] Call Trace: > [ 4.116860] <IRQ> [<ffffffff810db0f8>] __report_bad_irq+0x38/0xf0 > [ 4.116862] [<ffffffff810db3a3>] note_interrupt+0x1f3/0x240 > [ 4.116865] [<ffffffff810d8977>] handle_irq_event_percpu+0x147/0x230 > [ 4.116867] [<ffffffff810d8aa9>] handle_irq_event+0x49/0x70 > [ 4.116869] [<ffffffff810dbbc1>] handle_fasteoi_irq+0x61/0x100 > [ 4.116873] [<ffffffff81004689>] handle_irq+0x59/0x150 > [ 4.116877] [<ffffffff8104e916>] ? irq_enter+0x16/0x80 > [ 4.116879] [<ffffffff81003d4b>] do_IRQ+0x5b/0xe0 > [ 4.116883] [<ffffffff815563ad>] common_interrupt+0x6d/0x6d > [ 4.116888] <EOI> [<ffffffff81320dc1>] ? cfb_imageblit+0x581/0x5b0 > [ 4.116891] [<ffffffff8131e019>] bit_putcs+0x329/0x560 > [ 4.116893] [<ffffffff8131dc8f>] ? bit_cursor+0x5cf/0x630 > [ 4.116896] [<ffffffff81317a28>] fbcon_putcs+0xf8/0x130 > [ 4.116898] [<ffffffff8131dcf0>] ? bit_cursor+0x630/0x630 > [ 4.116900] [<ffffffff8131a27e>] fbcon_redraw+0x16e/0x1e0 > [ 4.116902] [<ffffffff8131a554>] fbcon_scroll+0x264/0xe40 > [ 4.116905] [<ffffffff8138a263>] scrup+0x113/0x120 > [ 4.116907] [<ffffffff8138a4d0>] lf+0x80/0x90 > [ 4.116910] [<ffffffff8138e1dd>] do_con_trol+0xcd/0x1360 > [ 4.116912] [<ffffffff8138f725>] do_con_write+0x2b5/0xa10 > [ 4.116915] [<ffffffff81552bb7>] ? __mutex_lock_slowpath+0x237/0x2e0 > [ 4.116917] [<ffffffff8138fed9>] con_write+0x19/0x30 > [ 4.116920] [<ffffffff8137823b>] do_output_char+0x1eb/0x220 > [ 4.116922] [<ffffffff813782b6>] process_output+0x46/0x70 > [ 4.116924] [<ffffffff81378b0f>] n_tty_write+0x13f/0x2f0 > [ 4.116928] [<ffffffff8107a900>] ? try_to_wake_up+0x2b0/0x2b0 > [ 4.116930] [<ffffffff8137553c>] tty_write+0x1cc/0x280 > [ 4.116932] [<ffffffff813789d0>] ? n_tty_ioctl+0x110/0x110 > [ 4.116934] [<ffffffff8137569d>] redirected_tty_write+0xad/0xc0 > [ 4.116937] [<ffffffff811733ab>] vfs_write+0xcb/0x130 > [ 4.116939] [<ffffffff81173bac>] sys_write+0x5c/0xa0 > [ 4.116943] [<ffffffff8155e4a9>] system_call_fastpath+0x16/0x1b > [ 4.116943] handlers: > [ 4.116959] [<ffffffffa0048450>] usb_hcd_irq [usbcore] > [ 4.116960] Disabling IRQ #16 > > I don't think I have seen this message on rc1+ (8343bce, to be precise), > but I have definitely seen sluggish system response on that kernel as > well. > > Attaching lspci, /proc/interrupts and dmesg. can you post dmesg with "debug ignore_loglevel pci=routeirq" with current linus tree and v3.8 or previous working kernel? Thanks Yinghai ^ permalink raw reply [flat|nested] 40+ messages in thread
* Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) @ 2013-03-18 7:14 Thomas Meyer 0 siblings, 0 replies; 40+ messages in thread From: Thomas Meyer @ 2013-03-18 7:14 UTC (permalink / raw) To: Jiri Kosina Cc: Harald Arnesen, Kernel development list, Rafael J. Wysocki, Peter Hurley, Alan Stern, Shawn Starr, USB list, linux-acpi, Bjorn Helgaas, linux-pci, Yinghai Lu, Daniel Vetter, Imre Deak, Daniel Kurtz, dri-devel TXkgbGFwdG9wIGlzIGFuIEFjZXIgMTgxMFQuIEkgc2VlIHRoaXMgZXJyb3IgbWVzc2FnZSBlYWNo IGJvb3QuCgpLaW5kIHJlZ2FyZHMKVGhvbWFzCgpKaXJpIEtvc2luYSA8amtvc2luYUBzdXNlLmN6 PiBzY2hyaWViOgoKPk9uIEZyaSwgMTUgTWFyIDIwMTMsIEppcmkgS29zaW5hIHdyb3RlOgo+Cj4+ ID4gSSBoYXZlIHRoZSBzYW1lIHByb2JsZW0gb24gbXkgTGVub3ZvIFQ1MDAuIEkgdGhpbmsgdGhl IGdyYXBoaWNzIGNhcmQgaXMKPj4gPiBpbnZvbHZlZC4KPj4gPiAKPj4gPiBUaGlzIGxhcHRvcCBo YXMgImh5YnJpZCBncmFwaGljcyIgLSBvbmUgSW50ZWwgR01BIDQ1MDBNSEQgYW5kIG9uZSBBVEkK Pj4gPiBNb2JpbGl0eSBSYWRlb24gSEQgMzY1MC4gV2hlbiBJIGJvb3Qgd2l0aCB0aGUgSW50ZWwg Y2FyZCwgSSBnZXQgImlycSAxNjoKPj4gPiBub2JvZHkgY2FyZWQiIGR1cmluZyBib290LCBub3Qg d2hlbiBJIGJvb3Qgd2l0aCB0aGUgQVRJIGNhcmQuCj4+IAo+PiBDb25maXJtaW5nIHRoaXMuIEFm dGVyIGEgbG90IG9mIGhhc3NsZSwgSSBoYXZlIGJpc2VjdGVkIHRoaXMgcmVsaWFibHkgdG8KPj4g Cj4+IAljb21taXQgMjhjNzBmMTYyYTMxNWJkY2ZiZTBiZjk0MGE3NDBlZjhiZmI5MThkNgo+PiAJ QXV0aG9yOiBEYW5pZWwgVmV0dGVyIDxkYW5pZWwudmV0dGVyQGZmd2xsLmNoPgo+PiAJRGF0ZTog ICBTYXQgRGVjIDEgMTM6NTM6NDUgMjAxMiArMDEwMAo+PiAKPj4gCSAgICBkcm0vaTkxNTogdXNl IHRoZSBnbWJ1cyBpcnEgZm9yIHdhaXRzCj4+IAo+PiBBZGRpbmcgRGFuaWVsLCBJbXJlIGFuZCBE YW5pZWwgdG8gQ0Mgd2hpbGUgSSB3aWxsIHRyeSB0byBmaWd1cmUgb3V0IHdoYXQncyAKPj4gaGFw cGVuaW5nIGluIHBhcmFsbGVsLgo+PiAKPj4gQXR0YWNoaW5nIGRtZXNnLnR4dCBmcm9tIHRoZSBt YWNoaW5lIHdpdGggMjhjNzBmMTYyYSBhcyBoZWFkLCB3aXRoIAo+PiBkcm0uZGVidWc9MHhlLgo+ Cj5KdXN0IGEgZGF0YXBvaW50IC0tIEkgaGF2ZSBwdXQgYSB0cml2aWFsIGRlYnVnZ2luZyBwYXRj aCBpbiBwbGFjZSwgYW5kIGl0IAo+cmV2ZWFscyB0aGF0ICJub2JvZHkgY2FyZWQiIGZvciBpcnEg MTYgaGFwcGVucyBsb25nIGFmdGVyIGxhc3QKPgo+CUk5MTVfV1JJVEUoR01CVVM0ICsgcmVnX29m ZnNldCwgMCk7Cj4KPmhhcyBiZWVuIHBlcmZvcm1lZCBpbiBnbWJ1c193YWl0X2h3X3N0YXR1cygp LiBPbiB0aGUgb3RoZXIgaGFuZCwgaWYgSSAKPmNvbW1lbnQgb3V0IGJvdGggR01CVVM0IHJlZ2lz dGVyIG9mZnNldCB3cml0ZXMgaW4gZ21idXNfd2FpdF9od19zdGF0dXMoKSwgCj50aGVuIGl0IG9m IGNvdXJzZSBmYWxscyBiYWNrIHRvIEdQSU8gYml0LWJhbmdpbmcsIGJ1dCB0aGUgIm5vYm9keSBj YXJlZCIgCj5mb3IgaXJxIDE2IGlzIGdvbmUuIAo+Cj5TbyBpdCBzZWVtcyBsaWtlIHNvbWV0aGlu ZyBnZXRzIHNldmVyZWx5IGNvbmZ1c2VkIGJ5IHRoZSBJOTE1X1dSSVRFIHRvIAo+R01CVVM0ICsg cmVnX29mZnNldC4gU28gZmFyIHRoaXMgc2VlbXMgdG8gaGF2ZSBiZWVuIHJlcG9ydGVkIHNvbGVs eSBvbiAKPkxlbm92b3MgYXMgZmFyIGFzIEkgY2FuIHNlZSAoYWx0aG91Z2ggYSBjb21wbGV0ZWx5 IGRpZmZlcmVudCB0eXBlcyksIHNvIGl0IAo+bWlnaHQgYmUgc29tZSBwbGF0Zm9ybS1zcGVjaWZp YyBxdWlyaz8KPgo+SG9uZXN0bHksIEkgc3RpbGwgZG9uJ3QgdW5kZXJzdGFuZCBob3cgYWxsIHRo ZSBHTUJVUyBzdHVmZiByZWxhdGVzIHRvIElSUSAKPjE2IGF0IGFsbC4gCj4KPi0tIAo+SmlyaSBL b3NpbmEKPlNVU0UgTGFicwo= ^ permalink raw reply [flat|nested] 40+ messages in thread
end of thread, other threads:[~2013-03-19 9:03 UTC | newest]
Thread overview: 40+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <Pine.LNX.4.44L0.1303082116310.28403-100000@netrider.rowland.org>
[not found] ` <1362819234.1220.1.camel@localhost.localdomain>
2013-03-09 13:07 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Peter Hurley
2013-03-13 21:35 ` Jiri Kosina
2013-03-14 14:51 ` Alan Stern
2013-03-14 14:56 ` Jiri Kosina
2013-03-14 15:18 ` Alan Stern
2013-03-14 15:39 ` Jiri Kosina
2013-03-14 15:47 ` Jiri Kosina
2013-03-14 16:10 ` Alan Stern
2013-03-14 16:13 ` Alan Stern
2013-03-14 16:09 ` Jiri Kosina
2013-03-14 16:42 ` Peter Hurley
2013-03-14 16:46 ` Rafael J. Wysocki
2013-03-14 17:06 ` Peter Hurley
2013-03-14 17:22 ` Rafael J. Wysocki
2013-03-14 17:26 ` Peter Hurley
2013-03-15 7:59 ` Jiri Kosina
2013-03-15 9:20 ` Harald Arnesen
2013-03-15 13:33 ` Jiri Kosina
2013-03-15 13:33 ` Jiri Kosina
2013-03-15 15:14 ` Jiri Kosina
2013-03-15 19:14 ` Yinghai Lu
2013-03-18 9:12 ` Jiri Kosina
2013-03-18 18:57 ` Yinghai Lu
2013-03-18 22:05 ` Jiri Kosina
2013-03-18 22:50 ` Yinghai Lu
2013-03-18 19:19 ` Daniel Vetter
2013-03-18 19:57 ` Chris Wilson
2013-03-18 22:04 ` Jiri Kosina
2013-03-15 15:32 ` Greg KH
2013-03-15 15:37 ` Jiri Kosina
2013-03-15 15:47 ` Greg KH
2013-03-15 16:21 ` Jiri Kosina
2013-03-18 8:21 ` Daniel Vetter
2013-03-18 15:56 ` [PATCH] drm/i915: stop using GMBUS IRQs on Gen4 chips (was Re: [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses)) Jiri Kosina
2013-03-18 17:04 ` Chris Wilson
2013-03-19 8:56 ` Jiri Kosina
2013-03-19 9:03 ` Chris Wilson
2013-03-18 19:21 ` Daniel Vetter
2013-03-14 18:48 ` [3.9-rc1] irq 16: nobody cared (was [3.9-rc1] very poor interrupt responses) Yinghai Lu
2013-03-18 7:14 Thomas Meyer
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox