From: Jon Derrick <jonathan.derrick@intel.com>
To: <linux-pci@vger.kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Russell King <rmk+kernel@armlinux.org.uk>,
Bjorn Helgaas <helgaas@kernel.org>,
Christoph Hellwig <hch@lst.de>, Rob Herring <robh@kernel.org>,
Jon Derrick <jonathan.derrick@intel.com>
Subject: [PATCH v2 3/4] PCI: pci-bridge-emul: Update for PCIe 5.0 r1.0
Date: Mon, 11 May 2020 12:21:16 -0400 [thread overview]
Message-ID: <20200511162117.6674-4-jonathan.derrick@intel.com> (raw)
In-Reply-To: <20200511162117.6674-1-jonathan.derrick@intel.com>
Add missing bits from PCIe 4.0 and updates for PCIe 5.0 r1.0.
PCIe 4.0:
Device Status bit 6 - W1C - Emergency Power Reduction Detected
Link Control bits 15:14 - RW - DRS Signaling Control
Slot Control bit 13 - RW - Auto Slow Power Limit Disable
PCIe 5.0:
Slot Control bit 14 - RW - In-Band PD Disable
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
---
drivers/pci/pci-bridge-emul.c | 31 ++++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c
index c00c30ffb198..6b1949995dee 100644
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -181,12 +181,12 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
.rw = GENMASK(15, 0),
/*
- * Device status register has 4 bits W1C, then 2 bits
- * RO, the rest is reserved
+ * Device status register has bits 6 and [3:0] W1C, [5:4] RO,
+ * the rest is reserved
*/
- .w1c = GENMASK(19, 16),
- .ro = GENMASK(21, 20),
- .rsvd = GENMASK(31, 22),
+ .w1c = (BIT(6) | GENMASK(3, 0)) << 16,
+ .ro = GENMASK(5, 4) << 16,
+ .rsvd = GENMASK(15, 7) << 16,
},
[PCI_EXP_LNKCAP / 4] = {
@@ -197,15 +197,16 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
[PCI_EXP_LNKCTL / 4] = {
/*
- * Link control has bits [1:0] and [11:3] RW, the
- * other bits are reserved.
- * Link status has bits [13:0] RO, and bits [14:15]
+ * Link control has bits [15:14], [11:3] and [1:0] RW, the
+ * rest is reserved.
+ *
+ * Link status has bits [13:0] RO, and bits [15:14]
* W1C.
*/
- .rw = GENMASK(11, 3) | GENMASK(1, 0),
+ .rw = GENMASK(15, 14) | GENMASK(11, 3) | GENMASK(1, 0),
.ro = GENMASK(13, 0) << 16,
.w1c = GENMASK(15, 14) << 16,
- .rsvd = GENMASK(15, 12) | BIT(2),
+ .rsvd = GENMASK(13, 12) | BIT(2),
},
[PCI_EXP_SLTCAP / 4] = {
@@ -214,19 +215,19 @@ static const struct pci_bridge_reg_behavior pcie_cap_regs_behavior[] = {
[PCI_EXP_SLTCTL / 4] = {
/*
- * Slot control has bits [12:0] RW, the rest is
+ * Slot control has bits [14:0] RW, the rest is
* reserved.
*
- * Slot status has a mix of W1C and RO bits, as well
- * as reserved bits.
+ * Slot status has bits 8 and [4:0] W1C, bits [7:5] RO, the
+ * rest is reserved.
*/
- .rw = GENMASK(12, 0),
+ .rw = GENMASK(14, 0),
.w1c = (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
PCI_EXP_SLTSTA_CC | PCI_EXP_SLTSTA_DLLSC) << 16,
.ro = (PCI_EXP_SLTSTA_MRLSS | PCI_EXP_SLTSTA_PDS |
PCI_EXP_SLTSTA_EIS) << 16,
- .rsvd = GENMASK(15, 13) | (GENMASK(15, 9) << 16),
+ .rsvd = GENMASK(15) | (GENMASK(15, 9) << 16),
},
[PCI_EXP_RTCTL / 4] = {
--
2.18.1
next prev parent reply other threads:[~2020-05-11 16:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-11 16:21 [PATCH v2 0/4] Align PCI Emul Bridge to PCIe 5.0 Jon Derrick
2020-05-11 16:21 ` [PATCH v2 1/4] PCI: pci-bridge-emul: Fix PCIe bit conflicts Jon Derrick
2020-05-11 16:21 ` [PATCH v2 2/4] PCI: pci-bridge-emul: Fix Root Cap/Status comment Jon Derrick
2020-05-11 16:21 ` Jon Derrick [this message]
2020-05-20 22:39 ` [PATCH v2 3/4] PCI: pci-bridge-emul: Update for PCIe 5.0 r1.0 Rob Herring
2020-05-11 16:21 ` [PATCH v2 4/4] PCI: pci-bridge-emul: Eliminate the 'reserved' member Jon Derrick
2020-05-20 22:41 ` Rob Herring
2020-05-22 11:42 ` [PATCH v2 0/4] Align PCI Emul Bridge to PCIe 5.0 Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200511162117.6674-4-jonathan.derrick@intel.com \
--to=jonathan.derrick@intel.com \
--cc=hch@lst.de \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox