From: Niklas Cassel <cassel@kernel.org>
To: "Jingoo Han" <jingoohan1@gmail.com>,
"Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Kishon Vijay Abraham I" <kishon@kernel.org>
Cc: Niklas Cassel <cassel@kernel.org>, linux-pci@vger.kernel.org
Subject: [PATCH v2] PCI: dwc: endpoint: Fix advertised resizable BAR size
Date: Thu, 7 Mar 2024 12:15:20 +0100 [thread overview]
Message-ID: <20240307111520.3303774-1-cassel@kernel.org> (raw)
The commit message in commit fc9a77040b04 ("PCI: designware-ep: Configure
Resizable BAR cap to advertise the smallest size") claims that it modifies
the Resizable BAR capability to only advertise support for 1 MB size BARs.
However, the commit writes all zeroes to PCI_REBAR_CAP (the register which
contains the possible BAR sizes that a BAR be resized to).
According to the spec, it is illegal to not have a bit set in
PCI_REBAR_CAP, and 1 MB is the smallest size allowed.
Set bit 4 in PCI_REBAR_CAP, so that we actually advertise support for a
1 MB BAR size.
Before:
Capabilities: [2e8 v1] Physical Resizable BAR
BAR 0: current size: 1MB
BAR 1: current size: 1MB
BAR 2: current size: 1MB
BAR 3: current size: 1MB
BAR 4: current size: 1MB
BAR 5: current size: 1MB
After:
Capabilities: [2e8 v1] Physical Resizable BAR
BAR 0: current size: 1MB, supported: 1MB
BAR 1: current size: 1MB, supported: 1MB
BAR 2: current size: 1MB, supported: 1MB
BAR 3: current size: 1MB, supported: 1MB
BAR 4: current size: 1MB, supported: 1MB
BAR 5: current size: 1MB, supported: 1MB
Fixes: fc9a77040b04 ("PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
Changes since v1:
-Fix spelling of advertise (Bjorn).
-Add lspci output to highlight the problem (Bjorn).
-Add specific section and version when referring to the PCIe spec (Bjorn).
drivers/pci/controller/dwc/pcie-designware-ep.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 9a437cfce073..746a11dcb67f 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -629,8 +629,13 @@ int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep)
nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >>
PCI_REBAR_CTRL_NBAR_SHIFT;
+ /*
+ * PCIe r6.0, sec 7.8.6.2 require us to support at least one
+ * size in the range from 1 MB to 512 GB. Advertise support
+ * for 1 MB BAR size only.
+ */
for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL)
- dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, 0x0);
+ dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, BIT(4));
}
/*
--
2.44.0
next reply other threads:[~2024-03-07 11:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-07 11:15 Niklas Cassel [this message]
2024-03-10 13:04 ` [PATCH v2] PCI: dwc: endpoint: Fix advertised resizable BAR size Manivannan Sadhasivam
2024-03-10 18:52 ` Krzysztof Wilczyński
2024-03-10 18:51 ` Krzysztof Wilczyński
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240307111520.3303774-1-cassel@kernel.org \
--to=cassel@kernel.org \
--cc=bhelgaas@google.com \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=kishon@kernel.org \
--cc=kw@linux.com \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox