[PATCH AUTOSEL 6.8 67/98] PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge

[PATCH AUTOSEL 6.8 67/98] PCI: Disable D3cold on Asus B1400 PCI-NVMe bridge

[Sasha Levin]

From: Daniel Drake <drake@endlessos.org>

[ Upstream commit cdea98bf1faef23166262825ce44648be6ebff42 ]

The Asus B1400 with original shipped firmware versions and VMD disabled
cannot resume from suspend: the NVMe device becomes unresponsive and
inaccessible.

This appears to be an untested D3cold transition by the vendor; Intel
socwatch shows that Windows leaves the NVMe device and parent bridge in D0
during suspend, even though these firmware versions have StorageD3Enable=1.

The NVMe device and parent PCI bridge both share the same "PXP" ACPI power
resource, which gets turned off as both devices are put into D3cold during
suspend. The _OFF() method calls DL23() which sets a L23E bit at offset
0xe2 into the PCI configuration space for this root port.  This is the
specific write that the _ON() routine is unable to recover from. This
register is not documented in the public chipset datasheet.

Disallow D3cold on the PCI bridge to enable successful suspend/resume.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742
Link: https://lore.kernel.org/r/20240228075316.7404-1-drake@endlessos.org
Signed-off-by: Daniel Drake <drake@endlessos.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jian-Hong Pan <jhp@endlessos.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/pci/fixup.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index f347c20247d30..b33afb240601b 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -907,6 +907,54 @@ static void chromeos_fixup_apl_pci_l1ss_capability(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x5ad6, chromeos_save_apl_pci_l1ss_capability);
 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x5ad6, chromeos_fixup_apl_pci_l1ss_capability);
 
+/*
+ * Disable D3cold on Asus B1400 PCI-NVMe bridge
+ *
+ * On this platform with VMD off, the NVMe device cannot successfully power
+ * back on from D3cold. This appears to be an untested transition by the
+ * vendor: Windows leaves the NVMe and parent bridge in D0 during suspend.
+ *
+ * We disable D3cold on the parent bridge for simplicity, and the fact that
+ * both parent bridge and NVMe device share the same power resource.
+ *
+ * This is only needed on BIOS versions before 308; the newer versions flip
+ * StorageD3Enable from 1 to 0.
+ */
+static const struct dmi_system_id asus_nvme_broken_d3cold_table[] = {
+	{
+		.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+				DMI_MATCH(DMI_BIOS_VERSION, "B1400CEAE.304"),
+		},
+	},
+	{
+		.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+				DMI_MATCH(DMI_BIOS_VERSION, "B1400CEAE.305"),
+		},
+	},
+	{
+		.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+				DMI_MATCH(DMI_BIOS_VERSION, "B1400CEAE.306"),
+		},
+	},
+	{
+		.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+				DMI_MATCH(DMI_BIOS_VERSION, "B1400CEAE.307"),
+		},
+	},
+	{}
+};
+
+static void asus_disable_nvme_d3cold(struct pci_dev *pdev)
+{
+	if (dmi_check_system(asus_nvme_broken_d3cold_table) > 0)
+		pci_d3cold_disable(pdev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x9a09, asus_disable_nvme_d3cold);
+
 #ifdef CONFIG_SUSPEND
 /*
  * Root Ports on some AMD SoCs advertise PME_Support for D3hot and D3cold, but
-- 
2.43.0

[PATCH AUTOSEL 6.8 71/98] PCI: Mark LSI FW643 to avoid bus reset

[Sasha Levin]

From: Edmund Raile <edmund.raile@proton.me>

[ Upstream commit 29a43dc130ce65d365a8ea9e1cc4bc51005a353e ]

Apparently the LSI / Agere FW643 can't recover after a Secondary Bus Reset
and requires a power-off or suspend/resume and rescan.

VFIO resets a device before assigning it to a VM, and the FW643 doesn't
support any other reset methods, so this problem prevented assignment of
FW643 to VMs.

Prevent use of Secondary Bus Reset for this device.

With this change, the FW643 can be assigned to VMs with VFIO.  Note that it
will not be reset, resulting in leaking state between VMs and host.

Link: https://lore.kernel.org/r/20240227131401.17913-1-edmund.raile@proton.me
Signed-off-by: Edmund Raile <edmund.raile@proton.me>
[bhelgaas: commit log, comment]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index d797df6e5f3e9..6ac58cd098b2b 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3765,6 +3765,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003e, quirk_no_bus_reset);
  */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset);
 
+/*
+ * Apparently the LSI / Agere FW643 can't recover after a Secondary Bus
+ * Reset and requires a power-off or suspend/resume and rescan.  Prevent
+ * use of that reset.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATT, 0x5900, quirk_no_bus_reset);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATT, 0x5901, quirk_no_bus_reset);
+
 /*
  * Some TI KeyStone C667X devices do not support bus/hot reset.  The PCIESS
  * automatically disables LTSSM when Secondary Bus Reset is received and
-- 
2.43.0