[PATCH 10/10] PCI: v3: Use generic PCI Conf Type 0/1 helpers

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

Convert v3 to use pci_conf{0,1}_addr() from PCI core to calculate PCI
Configuration Space address for Type 0/1 access.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/pci/controller/pci-v3-semi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/pci-v3-semi.c b/drivers/pci/controller/pci-v3-semi.c
index 460a825325dd..a07323148007 100644
--- a/drivers/pci/controller/pci-v3-semi.c
+++ b/drivers/pci/controller/pci-v3-semi.c
@@ -327,7 +327,7 @@ static void __iomem *v3_map_bus(struct pci_bus *bus,
 		 *  3:1 = config cycle (101)
 		 *  0   = PCI A1 & A0 are 0 (0)
 		 */
-		address = PCI_FUNC(devfn) << 8;
+		address = pci_conf0_addr(devfn, offset);
 		mapaddress = V3_LB_MAP_TYPE_CONFIG;
 
 		if (slot > 12)
@@ -354,7 +354,7 @@ static void __iomem *v3_map_bus(struct pci_bus *bus,
 		 *  0   = PCI A1 & A0 from host bus (1)
 		 */
 		mapaddress = V3_LB_MAP_TYPE_CONFIG | V3_LB_MAP_AD_LOW_EN;
-		address = (busnr << 16) | (devfn << 8);
+		address = pci_conf1_addr(busnr, devfn, offset, false);
 	}
 
 	/*
@@ -375,7 +375,7 @@ static void __iomem *v3_map_bus(struct pci_bus *bus,
 	       v3->base + V3_LB_BASE1);
 	writew(mapaddress, v3->base + V3_LB_MAP1);
 
-	return v3->config_base + address + offset;
+	return v3->config_base + address;
 }
 
 static void v3_unmap_bus(struct v3_pci *v3)
-- 
2.39.2