[PATCH 08/10] PCI: tegra: Use generic PCI Conf Type 1 helper

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

Convert tegra to use the pci_conf1_ext_addr() helper from PCI core to
calculate PCI Configuration Space address for Type 1 access.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---

Note: where mask is changed from 0xff -> 0xfc by this change.
---
 drivers/pci/controller/pci-tegra.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index 038d974a318e..a86e88c6b87a 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -415,13 +415,6 @@ static inline u32 pads_readl(struct tegra_pcie *pcie, unsigned long offset)
  * address (access to which generates correct config transaction) falls in
  * this 4 KiB region.
  */
-static unsigned int tegra_pcie_conf_offset(u8 bus, unsigned int devfn,
-					   unsigned int where)
-{
-	return ((where & 0xf00) << 16) | (bus << 16) | (PCI_SLOT(devfn) << 11) |
-	       (PCI_FUNC(devfn) << 8) | (where & 0xff);
-}
-
 static void __iomem *tegra_pcie_map_bus(struct pci_bus *bus,
 					unsigned int devfn,
 					int where)
@@ -440,10 +433,9 @@ static void __iomem *tegra_pcie_map_bus(struct pci_bus *bus,
 			}
 		}
 	} else {
-		unsigned int offset;
-		u32 base;
+		u32 base, offset;
 
-		offset = tegra_pcie_conf_offset(bus->number, devfn, where);
+		offset = pci_conf1_ext_addr(bus->number, devfn, where, false);
 
 		/* move 4 KiB window to offset within the FPCI region */
 		base = 0xfe100000 + ((offset & ~(SZ_4K - 1)) >> 8);
-- 
2.39.2