[PATCH AUTOSEL 5.15 01/13] PCI: Add ACS quirk for Broadcom BCM5760X NIC

[PATCH AUTOSEL 5.15 01/13] PCI: Add ACS quirk for Broadcom BCM5760X NIC

[Sasha Levin]

From: Ajit Khaparde <ajit.khaparde@broadcom.com>

[ Upstream commit 524e057b2d66b61f9b63b6db30467ab7b0bb4796 ]

The Broadcom BCM5760X NIC may be a multi-function device.

While it does not advertise an ACS capability, peer-to-peer transactions
are not possible between the individual functions. So it is ok to treat
them as fully isolated.

Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.

[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240510204228.73435-1-ajit.khaparde@broadcom.com
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 4d4267105cd2b..842e8fecf0a9a 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4971,6 +4971,10 @@ static const struct pci_dev_acs_enabled {
 	{ PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_BROADCOM, 0x1760, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_BROADCOM, 0x1761, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_BROADCOM, 0x1762, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_BROADCOM, 0x1763, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs },
 	/* Amazon Annapurna Labs */
 	{ PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
-- 
2.43.0

[PATCH AUTOSEL 5.15 02/13] PCI: Use preserve_config in place of pci_flags

[Sasha Levin]

From: Vidya Sagar <vidyas@nvidia.com>

[ Upstream commit 7246a4520b4bf1494d7d030166a11b5226f6d508 ]

Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable
support for "linux,pci-probe-only" on a per host bridge basis.

This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if
!PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care
of reassigning the resources that are not already claimed.

Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-host-common.c |  4 ----
 drivers/pci/probe.c                      | 20 +++++++++-----------
 2 files changed, 9 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/pci-host-common.c b/drivers/pci/controller/pci-host-common.c
index d3924a44db02f..fd3020a399cf9 100644
--- a/drivers/pci/controller/pci-host-common.c
+++ b/drivers/pci/controller/pci-host-common.c
@@ -73,10 +73,6 @@ int pci_host_common_probe(struct platform_device *pdev)
 	if (IS_ERR(cfg))
 		return PTR_ERR(cfg);
 
-	/* Do not reassign resources if probe only */
-	if (!pci_has_flag(PCI_PROBE_ONLY))
-		pci_add_flags(PCI_REASSIGN_ALL_BUS);
-
 	bridge->sysdata = cfg;
 	bridge->ops = (struct pci_ops *)&ops->pci_ops;
 	bridge->msi_domain = true;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index d9fc02a71baad..0052d3c83e4a4 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -3032,20 +3032,18 @@ int pci_host_probe(struct pci_host_bridge *bridge)
 
 	bus = bridge->bus;
 
+	/* If we must preserve the resource configuration, claim now */
+	if (bridge->preserve_config)
+		pci_bus_claim_resources(bus);
+
 	/*
-	 * We insert PCI resources into the iomem_resource and
-	 * ioport_resource trees in either pci_bus_claim_resources()
-	 * or pci_bus_assign_resources().
+	 * Assign whatever was left unassigned. If we didn't claim above,
+	 * this will reassign everything.
 	 */
-	if (pci_has_flag(PCI_PROBE_ONLY)) {
-		pci_bus_claim_resources(bus);
-	} else {
-		pci_bus_size_bridges(bus);
-		pci_bus_assign_resources(bus);
+	pci_assign_unassigned_root_bus_resources(bus);
 
-		list_for_each_entry(child, &bus->children, node)
-			pcie_bus_configure_settings(child);
-	}
+	list_for_each_entry(child, &bus->children, node)
+		pcie_bus_configure_settings(child);
 
 	pci_bus_add_devices(bus);
 	return 0;
-- 
2.43.0

[PATCH AUTOSEL 5.15 08/13] PCI/AER: Disable AER service on suspend

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 5afc2f763edc5daae4722ee46fea4e627d01fa90 ]

If the link is powered off during suspend, electrical noise may cause
errors that are logged via AER.  If the AER interrupt is enabled and shares
an IRQ with PME, that causes a spurious wakeup during suspend.

Disable the AER interrupt during suspend to prevent this.  Clear error
status before re-enabling IRQ interrupts during resume so we don't get an
interrupt for errors that occurred during the suspend/resume process.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=209149
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216295
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218090
Link: https://lore.kernel.org/r/20240416043225.1462548-2-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: drop pci_ancestor_pr3_present() etc, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pcie/aer.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 4f7744aab6c72..2908bfda88804 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1382,6 +1382,22 @@ static int aer_probe(struct pcie_device *dev)
 	return 0;
 }
 
+static int aer_suspend(struct pcie_device *dev)
+{
+	struct aer_rpc *rpc = get_service_data(dev);
+
+	aer_disable_rootport(rpc);
+	return 0;
+}
+
+static int aer_resume(struct pcie_device *dev)
+{
+	struct aer_rpc *rpc = get_service_data(dev);
+
+	aer_enable_rootport(rpc);
+	return 0;
+}
+
 /**
  * aer_root_reset - reset Root Port hierarchy, RCEC, or RCiEP
  * @dev: pointer to Root Port, RCEC, or RCiEP
@@ -1453,6 +1469,8 @@ static struct pcie_port_service_driver aerdriver = {
 	.service	= PCIE_PORT_SERVICE_AER,
 
 	.probe		= aer_probe,
+	.suspend	= aer_suspend,
+	.resume		= aer_resume,
 	.remove		= aer_remove,
 };
 
-- 
2.43.0

[PATCH AUTOSEL 5.15 10/13] PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 86f271f22bbb6391410a07e08d6ca3757fda01fa ]

Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0
(SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an
inbound PCIe TLP spans more than two internal AXI 128-byte bursts,
the bus may corrupt the packet payload and the corrupt data may
cause associated applications or the processor to hang.

The workaround for Errata #i2037 is to limit the maximum read
request size and maximum payload size to 128 bytes. Add workaround
for Errata #i2037 here.

The errata and workaround is applicable only to AM65x SR 1.0 and
later versions of the silicon will have this fixed.

[1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf

Link: https://lore.kernel.org/linux-pci/16e1fcae-1ea7-46be-b157-096e05661b15@siemens.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Achal Verma <a-verma1@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-keystone.c | 44 ++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 09379e5f7724a..24031123a5504 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -35,6 +35,11 @@
 #define PCIE_DEVICEID_SHIFT	16
 
 /* Application registers */
+#define PID				0x000
+#define RTL				GENMASK(15, 11)
+#define RTL_SHIFT			11
+#define AM6_PCI_PG1_RTL_VER		0x15
+
 #define CMD_STATUS			0x004
 #define LTSSM_EN_VAL		        BIT(0)
 #define OB_XLAT_EN_VAL		        BIT(1)
@@ -105,6 +110,8 @@
 
 #define to_keystone_pcie(x)		dev_get_drvdata((x)->dev)
 
+#define PCI_DEVICE_ID_TI_AM654X		0xb00c
+
 struct ks_pcie_of_data {
 	enum dw_pcie_device_mode mode;
 	const struct dw_pcie_host_ops *host_ops;
@@ -528,7 +535,11 @@ static int ks_pcie_start_link(struct dw_pcie *pci)
 static void ks_pcie_quirk(struct pci_dev *dev)
 {
 	struct pci_bus *bus = dev->bus;
+	struct keystone_pcie *ks_pcie;
+	struct device *bridge_dev;
 	struct pci_dev *bridge;
+	u32 val;
+
 	static const struct pci_device_id rc_pci_devids[] = {
 		{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2HK),
 		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
@@ -540,6 +551,11 @@ static void ks_pcie_quirk(struct pci_dev *dev)
 		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
 		{ 0, },
 	};
+	static const struct pci_device_id am6_pci_devids[] = {
+		{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM654X),
+		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
+		{ 0, },
+	};
 
 	if (pci_is_root_bus(bus))
 		bridge = dev;
@@ -561,10 +577,36 @@ static void ks_pcie_quirk(struct pci_dev *dev)
 	 */
 	if (pci_match_id(rc_pci_devids, bridge)) {
 		if (pcie_get_readrq(dev) > 256) {
-			dev_info(&dev->dev, "limiting MRRS to 256\n");
+			dev_info(&dev->dev, "limiting MRRS to 256 bytes\n");
 			pcie_set_readrq(dev, 256);
 		}
 	}
+
+	/*
+	 * Memory transactions fail with PCI controller in AM654 PG1.0
+	 * when MRRS is set to more than 128 bytes. Force the MRRS to
+	 * 128 bytes in all downstream devices.
+	 */
+	if (pci_match_id(am6_pci_devids, bridge)) {
+		bridge_dev = pci_get_host_bridge_device(dev);
+		if (!bridge_dev && !bridge_dev->parent)
+			return;
+
+		ks_pcie = dev_get_drvdata(bridge_dev->parent);
+		if (!ks_pcie)
+			return;
+
+		val = ks_pcie_app_readl(ks_pcie, PID);
+		val &= RTL;
+		val >>= RTL_SHIFT;
+		if (val != AM6_PCI_PG1_RTL_VER)
+			return;
+
+		if (pcie_get_readrq(dev) > 128) {
+			dev_info(&dev->dev, "limiting MRRS to 128 bytes\n");
+			pcie_set_readrq(dev, 128);
+		}
+	}
 }
 DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, ks_pcie_quirk);
 
-- 
2.43.0

[PATCH AUTOSEL 5.15 11/13] PCI: vmd: Create domain symlink before pci_bus_add_devices()

[Sasha Levin]

From: Jiwei Sun <sunjw10@lenovo.com>

[ Upstream commit f24c9bfcd423e2b2bb0d198456412f614ec2030a ]

The vmd driver creates a "domain" symlink in sysfs for each VMD bridge.
Previously this symlink was created after pci_bus_add_devices() added
devices below the VMD bridge and emitted udev events to announce them to
userspace.

This led to a race between userspace consumers of the udev events and the
kernel creation of the symlink.  One such consumer is mdadm, which
assembles block devices into a RAID array, and for devices below a VMD
bridge, mdadm depends on the "domain" symlink.

If mdadm loses the race, it may be unable to assemble a RAID array, which
may cause a boot failure or other issues, with complaints like this:

  (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: Unable to get real path for '/sys/bus/pci/drivers/vmd/0000:c7:00.5/domain/device''
  (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: /dev/nvme1n1 is not attached to Intel(R) RAID controller.'
  (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: No OROM/EFI properties for /dev/nvme1n1'
  (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: no RAID superblock on /dev/nvme1n1.'
  (udev-worker)[2149]: nvme1n1: Process '/sbin/mdadm -I /dev/nvme1n1' failed with exit code 1.

This symptom prevents the OS from booting successfully.

After a NVMe disk is probed/added by the nvme driver, udevd invokes mdadm
to detect if there is a mdraid associated with this NVMe disk, and mdadm
determines if a NVMe device is connected to a particular VMD domain by
checking the "domain" symlink. For example:

  Thread A                   Thread B             Thread mdadm
  vmd_enable_domain
    pci_bus_add_devices
      __driver_probe_device
       ...
       work_on_cpu
         schedule_work_on
         : wakeup Thread B
                             nvme_probe
                             : wakeup scan_work
                               to scan nvme disk
                               and add nvme disk
                               then wakeup udevd
                                                  : udevd executes
                                                    mdadm command
         flush_work                               main
         : wait for nvme_probe done                ...
      __driver_probe_device                        find_driver_devices
      : probe next nvme device                     : 1) Detect domain symlink
      ...                                            2) Find domain symlink
      ...                                               from vmd sysfs
      ...                                            3) Domain symlink not
      ...                                               created yet; failed
    sysfs_create_link
    : create domain symlink

Create the VMD "domain" symlink before invoking pci_bus_add_devices() to
avoid this race.

Suggested-by: Adrian Huang <ahuang12@lenovo.com>
Link: https://lore.kernel.org/linux-pci/20240605124844.24293-1-sjiwei@163.com
Signed-off-by: Jiwei Sun <sunjw10@lenovo.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/vmd.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index f49001ba96c75..10a078ef4799d 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -798,6 +798,9 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	if (vmd->irq_domain)
 		dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
 
+	WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,
+			       "domain"), "Can't create symlink to domain\n");
+
 	vmd_acpi_begin();
 
 	pci_scan_child_bus(vmd->bus);
@@ -814,9 +817,6 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	pci_bus_add_devices(vmd->bus);
 
 	vmd_acpi_end();
-
-	WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,
-			       "domain"), "Can't create symlink to domain\n");
 	return 0;
 }
 
@@ -873,8 +873,8 @@ static void vmd_remove(struct pci_dev *dev)
 {
 	struct vmd_dev *vmd = pci_get_drvdata(dev);
 
-	sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
 	pci_stop_root_bus(vmd->bus);
+	sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
 	pci_remove_root_bus(vmd->bus);
 	vmd_cleanup_srcu(vmd);
 	vmd_detach_resources(vmd);
-- 
2.43.0

[PATCH AUTOSEL 5.15 12/13] PCI: Add missing bridge lock to pci_bus_lock()

[Sasha Levin]

From: Dan Williams <dan.j.williams@intel.com>

[ Upstream commit a4e772898f8bf2e7e1cf661a12c60a5612c4afab ]

One of the true positives that the cfg_access_lock lockdep effort
identified is this sequence:

  WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70
  RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70
  Call Trace:
   <TASK>
   ? __warn+0x8c/0x190
   ? pci_bridge_secondary_bus_reset+0x5d/0x70
   ? report_bug+0x1f8/0x200
   ? handle_bug+0x3c/0x70
   ? exc_invalid_op+0x18/0x70
   ? asm_exc_invalid_op+0x1a/0x20
   ? pci_bridge_secondary_bus_reset+0x5d/0x70
   pci_reset_bus+0x1d8/0x270
   vmd_probe+0x778/0xa10
   pci_device_probe+0x95/0x120

Where pci_reset_bus() users are triggering unlocked secondary bus resets.
Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses
pci_bus_lock() before issuing the reset which locks everything *but* the
bridge itself.

For the same motivation as adding:

  bridge = pci_upstream_bridge(dev);
  if (bridge)
    pci_dev_lock(bridge);

to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add
pci_dev_lock() for @bus->self to pci_bus_lock().

Link: https://lore.kernel.org/r/171711747501.1628941.15217746952476635316.stgit@dwillia2-xfh.jf.intel.com
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: http://lore.kernel.org/r/6657833b3b5ae_14984b29437@dwillia2-xfh.jf.intel.com.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
[bhelgaas: squash in recursive locking deadlock fix from Keith Busch:
https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 67216f4ea2151..84c1300afb951 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5491,10 +5491,12 @@ static void pci_bus_lock(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 
+	pci_dev_lock(bus->self);
 	list_for_each_entry(dev, &bus->devices, bus_list) {
-		pci_dev_lock(dev);
 		if (dev->subordinate)
 			pci_bus_lock(dev->subordinate);
+		else
+			pci_dev_lock(dev);
 	}
 }
 
@@ -5506,8 +5508,10 @@ static void pci_bus_unlock(struct pci_bus *bus)
 	list_for_each_entry(dev, &bus->devices, bus_list) {
 		if (dev->subordinate)
 			pci_bus_unlock(dev->subordinate);
-		pci_dev_unlock(dev);
+		else
+			pci_dev_unlock(dev);
 	}
+	pci_dev_unlock(bus->self);
 }
 
 /* Return 1 on successful lock, 0 on contention */
@@ -5515,15 +5519,15 @@ static int pci_bus_trylock(struct pci_bus *bus)
 {
 	struct pci_dev *dev;
 
+	if (!pci_dev_trylock(bus->self))
+		return 0;
+
 	list_for_each_entry(dev, &bus->devices, bus_list) {
-		if (!pci_dev_trylock(dev))
-			goto unlock;
 		if (dev->subordinate) {
-			if (!pci_bus_trylock(dev->subordinate)) {
-				pci_dev_unlock(dev);
+			if (!pci_bus_trylock(dev->subordinate))
 				goto unlock;
-			}
-		}
+		} else if (!pci_dev_trylock(dev))
+			goto unlock;
 	}
 	return 1;
 
@@ -5531,8 +5535,10 @@ static int pci_bus_trylock(struct pci_bus *bus)
 	list_for_each_entry_continue_reverse(dev, &bus->devices, bus_list) {
 		if (dev->subordinate)
 			pci_bus_unlock(dev->subordinate);
-		pci_dev_unlock(dev);
+		else
+			pci_dev_unlock(dev);
 	}
+	pci_dev_unlock(bus->self);
 	return 0;
 }
 
@@ -5564,9 +5570,10 @@ static void pci_slot_lock(struct pci_slot *slot)
 	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
 		if (!dev->slot || dev->slot != slot)
 			continue;
-		pci_dev_lock(dev);
 		if (dev->subordinate)
 			pci_bus_lock(dev->subordinate);
+		else
+			pci_dev_lock(dev);
 	}
 }
 
@@ -5592,14 +5599,13 @@ static int pci_slot_trylock(struct pci_slot *slot)
 	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
 		if (!dev->slot || dev->slot != slot)
 			continue;
-		if (!pci_dev_trylock(dev))
-			goto unlock;
 		if (dev->subordinate) {
 			if (!pci_bus_trylock(dev->subordinate)) {
 				pci_dev_unlock(dev);
 				goto unlock;
 			}
-		}
+		} else if (!pci_dev_trylock(dev))
+			goto unlock;
 	}
 	return 1;
 
@@ -5610,7 +5616,8 @@ static int pci_slot_trylock(struct pci_slot *slot)
 			continue;
 		if (dev->subordinate)
 			pci_bus_unlock(dev->subordinate);
-		pci_dev_unlock(dev);
+		else
+			pci_dev_unlock(dev);
 	}
 	return 0;
 }
-- 
2.43.0