Re: [PATCH] PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads

[Bjorn Helgaas <helgaas@kernel.org>]

On Tue, Aug 06, 2024 at 02:50:50PM +0800, 412574090@163.com wrote:
> From: weiyufeng <weiyufeng@kylinos.cn>
> 
> Use PCI_POSSIBLE_ERROR() to check the response we get when we read data
> from hardware.  This unifies PCI error response checking and makes error
> checks consistent and easier to find.
> 
> Signed-off-by: weiyufeng <weiyufeng@kylinos.cn>

Thanks, applied to pci/hotplug for v6.12.

> ---
>  drivers/pci/hotplug/cpqphp_pci.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
> index e9f1fb333a71..718bc6cf12cb 100644
> --- a/drivers/pci/hotplug/cpqphp_pci.c
> +++ b/drivers/pci/hotplug/cpqphp_pci.c
> @@ -138,7 +138,7 @@ static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 o
>  
>  	if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &vendID) == -1)
>  		return -1;
> -	if (vendID == 0xffffffff)
> +	if (PCI_POSSIBLE_ERROR(vendID))
>  		return -1;
>  	return pci_bus_read_config_dword(bus, devfn, offset, value);
>  }
> @@ -253,7 +253,7 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
>  			*dev_num = tdevice;
>  			ctrl->pci_bus->number = tbus;
>  			pci_bus_read_config_dword(ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
> -			if (!nobridge || (work == 0xffffffff))
> +			if (!nobridge || PCI_POSSIBLE_ERROR(work))
>  				return 0;
>  
>  			dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
> -- 
> 2.25.1
>