* [PATCH] PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads
@ 2024-08-06 6:50 412574090
2024-08-06 19:17 ` Bjorn Helgaas
0 siblings, 1 reply; 2+ messages in thread
From: 412574090 @ 2024-08-06 6:50 UTC (permalink / raw)
To: bhelgaas; +Cc: linux-pci, linux-kernel, xiongxin, weiyufeng
From: weiyufeng <weiyufeng@kylinos.cn>
Use PCI_POSSIBLE_ERROR() to check the response we get when we read data
from hardware. This unifies PCI error response checking and makes error
checks consistent and easier to find.
Signed-off-by: weiyufeng <weiyufeng@kylinos.cn>
---
drivers/pci/hotplug/cpqphp_pci.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
index e9f1fb333a71..718bc6cf12cb 100644
--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -138,7 +138,7 @@ static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 o
if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &vendID) == -1)
return -1;
- if (vendID == 0xffffffff)
+ if (PCI_POSSIBLE_ERROR(vendID))
return -1;
return pci_bus_read_config_dword(bus, devfn, offset, value);
}
@@ -253,7 +253,7 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
*dev_num = tdevice;
ctrl->pci_bus->number = tbus;
pci_bus_read_config_dword(ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
- if (!nobridge || (work == 0xffffffff))
+ if (!nobridge || PCI_POSSIBLE_ERROR(work))
return 0;
dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads
2024-08-06 6:50 [PATCH] PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads 412574090
@ 2024-08-06 19:17 ` Bjorn Helgaas
0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Helgaas @ 2024-08-06 19:17 UTC (permalink / raw)
To: 412574090; +Cc: bhelgaas, linux-pci, linux-kernel, xiongxin, weiyufeng
On Tue, Aug 06, 2024 at 02:50:50PM +0800, 412574090@163.com wrote:
> From: weiyufeng <weiyufeng@kylinos.cn>
>
> Use PCI_POSSIBLE_ERROR() to check the response we get when we read data
> from hardware. This unifies PCI error response checking and makes error
> checks consistent and easier to find.
>
> Signed-off-by: weiyufeng <weiyufeng@kylinos.cn>
Thanks, applied to pci/hotplug for v6.12.
> ---
> drivers/pci/hotplug/cpqphp_pci.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/hotplug/cpqphp_pci.c b/drivers/pci/hotplug/cpqphp_pci.c
> index e9f1fb333a71..718bc6cf12cb 100644
> --- a/drivers/pci/hotplug/cpqphp_pci.c
> +++ b/drivers/pci/hotplug/cpqphp_pci.c
> @@ -138,7 +138,7 @@ static int PCI_RefinedAccessConfig(struct pci_bus *bus, unsigned int devfn, u8 o
>
> if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &vendID) == -1)
> return -1;
> - if (vendID == 0xffffffff)
> + if (PCI_POSSIBLE_ERROR(vendID))
> return -1;
> return pci_bus_read_config_dword(bus, devfn, offset, value);
> }
> @@ -253,7 +253,7 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
> *dev_num = tdevice;
> ctrl->pci_bus->number = tbus;
> pci_bus_read_config_dword(ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
> - if (!nobridge || (work == 0xffffffff))
> + if (!nobridge || PCI_POSSIBLE_ERROR(work))
> return 0;
>
> dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-08-06 19:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-08-06 6:50 [PATCH] PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads 412574090
2024-08-06 19:17 ` Bjorn Helgaas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox