From: Terry Bowman <terry.bowman@amd.com>
To: <linux-cxl@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-pci@vger.kernel.org>, <nifan.cxl@gmail.com>,
<ming4.li@intel.com>, <dave@stgolabs.net>,
<jonathan.cameron@huawei.com>, <dave.jiang@intel.com>,
<alison.schofield@intel.com>, <vishal.l.verma@intel.com>,
<dan.j.williams@intel.com>, <bhelgaas@google.com>,
<mahesh@linux.ibm.com>, <ira.weiny@intel.com>, <oohall@gmail.com>,
<Benjamin.Cheatham@amd.com>, <rrichter@amd.com>,
<nathan.fontenot@amd.com>, <terry.bowman@amd.com>,
<Smita.KoralahalliChannabasappa@amd.com>, <lukas@wunner.de>,
<PradeepVineshReddy.Kodamati@amd.com>
Subject: [PATCH v4 03/15] cxl/pci: Introduce PCIe helper functions pcie_is_cxl() and pcie_is_cxl_port()
Date: Wed, 11 Dec 2024 17:39:50 -0600 [thread overview]
Message-ID: <20241211234002.3728674-4-terry.bowman@amd.com> (raw)
In-Reply-To: <20241211234002.3728674-1-terry.bowman@amd.com>
CXL and AER drivers need the ability to identify CXL devices and CXL port
devices.
First, add set_pcie_cxl() with logic checking for CXL Flexbus DVSEC
presence. The CXL Flexbus DVSEC presence is used because it is required
for all the CXL PCIe devices.[1]
Add boolean 'struct pci_dev::is_cxl' with the purpose to cache the CXL
Flexbus presence.
Add pcie_is_cxl() as a macro to return 'struct pci_dev::is_cxl'.
Add pcie_is_cxl_port() to check if a device is a CXL Root Port, CXL
Upstream Switch Port, or CXL Downstream Switch Port. Also, verify the
CXL extensions DVSEC for port is present.[1]
[1] CXL 3.1 Spec, 8.1.1 PCIe Designated Vendor-Specific Extended
Capability (DVSEC) ID Assignment, Table 8-2
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
---
drivers/pci/pci.c | 13 +++++++++++++
drivers/pci/probe.c | 10 ++++++++++
include/linux/pci.h | 4 ++++
include/uapi/linux/pci_regs.h | 3 ++-
4 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 225a6cd2e9ca..c96c304bc799 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -5034,10 +5034,23 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, bool probe)
static u16 cxl_port_dvsec(struct pci_dev *dev)
{
+ if (!pcie_is_cxl(dev))
+ return 0;
+
return pci_find_dvsec_capability(dev, PCI_VENDOR_ID_CXL,
PCI_DVSEC_CXL_PORT);
}
+bool pcie_is_cxl_port(struct pci_dev *dev)
+{
+ if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) &&
+ (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))
+ return false;
+
+ return cxl_port_dvsec(dev);
+}
+
static bool cxl_sbr_masked(struct pci_dev *dev)
{
u16 dvsec, reg;
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index f1615805f5b0..277e3fc8e1a7 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1631,6 +1631,14 @@ static void set_pcie_thunderbolt(struct pci_dev *dev)
dev->is_thunderbolt = 1;
}
+static void set_pcie_cxl(struct pci_dev *dev)
+{
+ u16 dvsec = pci_find_dvsec_capability(dev, PCI_VENDOR_ID_CXL,
+ PCI_DVSEC_CXL_FLEXBUS);
+ if (dvsec)
+ dev->is_cxl = 1;
+}
+
static void set_pcie_untrusted(struct pci_dev *dev)
{
struct pci_dev *parent;
@@ -1945,6 +1953,8 @@ int pci_setup_device(struct pci_dev *dev)
/* Need to have dev->cfg_size ready */
set_pcie_thunderbolt(dev);
+ set_pcie_cxl(dev);
+
set_pcie_untrusted(dev);
/* "Unknown power state" */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index f6a9dddfc9e9..33a9abecdaba 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -443,6 +443,7 @@ struct pci_dev {
unsigned int is_hotplug_bridge:1;
unsigned int shpc_managed:1; /* SHPC owned by shpchp */
unsigned int is_thunderbolt:1; /* Thunderbolt controller */
+ unsigned int is_cxl:1; /* Compute Express Link (CXL) */
/*
* Devices marked being untrusted are the ones that can potentially
* execute DMA attacks and similar. They are typically connected
@@ -743,6 +744,9 @@ static inline bool pci_is_vga(struct pci_dev *pdev)
return false;
}
+#define pcie_is_cxl(dev) (dev->is_cxl)
+bool pcie_is_cxl_port(struct pci_dev *dev);
+
#define for_each_pci_bridge(dev, bus) \
list_for_each_entry(dev, &bus->devices, bus_list) \
if (!pci_is_bridge(dev)) {} else
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 12323b3334a9..5df6c74963c5 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -1186,9 +1186,10 @@
#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_PROTOCOL 0x00ff0000
#define PCI_DOE_DATA_OBJECT_DISC_RSP_3_NEXT_INDEX 0xff000000
-/* Compute Express Link (CXL r3.1, sec 8.1.5) */
+/* Compute Express Link (CXL r3.1, sec 8.1) */
#define PCI_DVSEC_CXL_PORT 3
#define PCI_DVSEC_CXL_PORT_CTL 0x0c
#define PCI_DVSEC_CXL_PORT_CTL_UNMASK_SBR 0x00000001
+#define PCI_DVSEC_CXL_FLEXBUS 7
#endif /* LINUX_PCI_REGS_H */
--
2.34.1
next prev parent reply other threads:[~2024-12-11 23:40 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-11 23:39 [PATCH v4 0/15] Enable CXL PCIe Port protocol error handling and logging Terry Bowman
2024-12-11 23:39 ` [PATCH v4 01/15] PCI/AER: Introduce 'struct cxl_err_handlers' and add to 'struct pci_driver' Terry Bowman
2024-12-11 23:39 ` [PATCH v4 02/15] PCI/AER: Rename AER driver's interfaces to also indicate CXL PCIe Port support Terry Bowman
2024-12-11 23:39 ` Terry Bowman [this message]
2024-12-11 23:39 ` [PATCH v4 04/15] PCI/AER: Modify AER driver logging to report CXL or PCIe bus error type Terry Bowman
2024-12-12 1:34 ` Li Ming
2024-12-12 19:59 ` Bowman, Terry
2024-12-14 13:34 ` Li Ming
2024-12-11 23:39 ` [PATCH v4 05/15] PCI/AER: Add CXL PCIe Port correctable error support in AER service driver Terry Bowman
2024-12-11 23:39 ` [PATCH v4 06/15] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe Port devices Terry Bowman
2024-12-24 18:28 ` Jonathan Cameron
2024-12-11 23:39 ` [PATCH v4 07/15] PCI/AER: Add CXL PCIe Port Uncorrectable Error recovery in AER service driver Terry Bowman
2024-12-12 9:28 ` Alejandro Lucero Palau
2024-12-13 15:07 ` Bowman, Terry
2024-12-24 18:31 ` Jonathan Cameron
2024-12-11 23:39 ` [PATCH v4 08/15] cxl/pci: Map CXL PCIe Root Port and Downstream Switch Port RAS registers Terry Bowman
2024-12-12 10:36 ` Alejandro Lucero Palau
2024-12-13 15:10 ` Bowman, Terry
2024-12-24 18:38 ` Jonathan Cameron
2024-12-11 23:39 ` [PATCH v4 09/15] cxl/pci: Map CXL PCIe Upstream " Terry Bowman
2024-12-24 18:41 ` Jonathan Cameron
2024-12-11 23:39 ` [PATCH v4 10/15] cxl/pci: Update RAS handler interfaces to also support CXL PCIe Ports Terry Bowman
2024-12-12 10:38 ` Alejandro Lucero Palau
2024-12-24 18:42 ` Jonathan Cameron
2024-12-11 23:39 ` [PATCH v4 11/15] cxl/pci: Change find_cxl_port() to non-static Terry Bowman
2024-12-11 23:39 ` [PATCH v4 12/15] cxl/pci: Add error handler for CXL PCIe Port RAS errors Terry Bowman
2024-12-12 2:19 ` Li Ming
2024-12-24 18:43 ` Jonathan Cameron
2024-12-11 23:40 ` [PATCH v4 13/15] cxl/pci: Add trace logging " Terry Bowman
2024-12-12 9:46 ` Alejandro Lucero Palau
2024-12-24 18:46 ` Jonathan Cameron
2024-12-26 17:01 ` Bowman, Terry
2024-12-11 23:40 ` [PATCH v4 14/15] cxl/pci: Add support to assign and clear pci_driver::cxl_err_handlers Terry Bowman
2024-12-12 2:31 ` Li Ming
2024-12-17 14:39 ` Bowman, Terry
2024-12-24 18:50 ` Jonathan Cameron
2024-12-26 17:07 ` Bowman, Terry
2025-01-07 11:32 ` Jonathan Cameron
2024-12-11 23:40 ` [PATCH v4 15/15] PCI/AER: Enable internal errors for CXL Upstream and Downstream Switch Ports Terry Bowman
2024-12-12 9:44 ` Alejandro Lucero Palau
2024-12-12 10:44 ` Alejandro Lucero Palau
2024-12-13 15:22 ` Bowman, Terry
2024-12-13 15:34 ` Bowman, Terry
2024-12-24 18:53 ` Jonathan Cameron
2024-12-26 17:19 ` Bowman, Terry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241211234002.3728674-4-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Benjamin.Cheatham@amd.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=mahesh@linux.ibm.com \
--cc=ming4.li@intel.com \
--cc=nathan.fontenot@amd.com \
--cc=nifan.cxl@gmail.com \
--cc=oohall@gmail.com \
--cc=rrichter@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox