[PATCH v4 6/7] PCI/AER: Add ratelimits to PCI AER Documentation

[Jon Pan-Doh <pandoh@google.com>]

Add ratelimits section for rationale and defaults.

Signed-off-by: Karolina Stolarek <karolina.stolarek@oracle.com>
Signed-off-by: Jon Pan-Doh <pandoh@google.com>
---
 Documentation/PCI/pcieaer-howto.rst | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/PCI/pcieaer-howto.rst b/Documentation/PCI/pcieaer-howto.rst
index f013f3b27c82..896d2a232a90 100644
--- a/Documentation/PCI/pcieaer-howto.rst
+++ b/Documentation/PCI/pcieaer-howto.rst
@@ -85,6 +85,17 @@ In the example, 'Requester ID' means the ID of the device that sent
 the error message to the Root Port. Please refer to PCIe specs for other
 fields.
 
+AER Ratelimits
+--------------
+
+Since error messages can be generated for each transaction, we may see
+large volumes of errors reported. To prevent spammy devices from flooding
+the console/stalling execution, messages are throttled by device and error
+type (correctable vs. uncorrectable).
+
+AER uses the default ratelimit of DEFAULT_RATELIMIT_BURST (10 events) over
+DEFAULT_RATELIMIT_INTERVAL (5 seconds).
+
 AER Statistics / Counters
 -------------------------
 
-- 
2.49.0.rc1.451.g8f38331e32-goog