Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Niklas Cassel <cassel@kernel.org>
To: "Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Jonathan Hunter" <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>,
	Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>,
	Niklas Cassel <cassel@kernel.org>,
	linux-pci@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: [PATCH] PCI: tegra194: Reset BARs when running in PCIe endpoint mode
Date: Fri, 19 Sep 2025 15:16:47 +0200	[thread overview]
Message-ID: <20250919131646.167330-2-cassel@kernel.org> (raw)

Tegra already defines all BARs expect for BAR0 as BAR_RESERVED.
This is sufficient for pci-epf-test to not allocate backing memory and to
not call set_bar() for those BARs.

However, the host side driver, pci_endpoint_test, simply does an ioremap
for all enabled BARs, and will run tests against all enabled BARs.

After running the BARs tests (which will write to all enabled BARs), the
inbound address translation is broken.
This is because the tegra controller exposes the ATU Port Logic Structure
in BAR4. So when BAR4 is written, the inbound address translation settings
get overwritten.

To avoid this, implement the dw_pcie_ep_ops .init() callback and start off
by disabling all BARs (pci-epf-test will later enable/configure BARs that
are not defined as BAR_RESERVED).

This matches the behavior of other PCIe endpoint drivers:
dra7xx, imx6, layerscape-ep, artpec6, dw-rockchip, qcom-ep, rcar-gen4, and
uniphier-ep.

With this, the PCI endpoint kselftest test case CONSECUTIVE_BAR_TEST
(which was specifically made to detect address translation issues) passes.

Signed-off-by: Niklas Cassel <cassel@kernel.org>
---
 drivers/pci/controller/dwc/pcie-tegra194.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 4f26086f25daf..9488805ecf608 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1941,6 +1941,15 @@ static irqreturn_t tegra_pcie_ep_pex_rst_irq(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+static void tegra_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	enum pci_barno bar;
+
+	for (bar = 0; bar < PCI_STD_NUM_BARS; bar++)
+		dw_pcie_ep_reset_bar(pci, bar);
+};
+
 static int tegra_pcie_ep_raise_intx_irq(struct tegra_pcie_dw *pcie, u16 irq)
 {
 	/* Tegra194 supports only INTA */
@@ -2017,6 +2026,7 @@ tegra_pcie_ep_get_features(struct dw_pcie_ep *ep)
 }
 
 static const struct dw_pcie_ep_ops pcie_ep_ops = {
+	.init = tegra_pcie_ep_init,
 	.raise_irq = tegra_pcie_ep_raise_irq,
 	.get_features = tegra_pcie_ep_get_features,
 };
-- 
2.51.0


             reply	other threads:[~2025-09-19 13:16 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-19 13:16 Niklas Cassel [this message]
2025-09-20 15:34 ` [PATCH] PCI: tegra194: Reset BARs when running in PCIe endpoint mode Manivannan Sadhasivam
2025-09-22 13:06   ` Niklas Cassel
2025-09-24 15:57     ` Manivannan Sadhasivam
2025-09-24 16:15       ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250919131646.167330-2-cassel@kernel.org \
    --to=cassel@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=jonathanh@nvidia.com \
    --cc=kwilczynski@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=robh@kernel.org \
    --cc=shinichiro.kawasaki@wdc.com \
    --cc=thierry.reding@gmail.com \
    --cc=vidyas@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox