[PATCH 2/3] PCI: dwc: Use common D3cold eligibility helper in suspend path

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

Previously, the driver skipped putting the link into L2/device state in
D3cold whenever L1 ASPM was enabled, since some devices (e.g. NVMe) expect
low resume latency and may not tolerate deeper power states. However, such
devices typically remain in D0 and are already covered by the new helper's
requirement that all endpoints be in D3hot before the host bridge may
enter D3cold.

So, replace the local L1/L1SS-based check in dw_pcie_suspend_noirq() with
the shared pci_host_common_can_enter_d3cold() helper to decide whether the
DesignWare host bridge can safely transition to D3cold.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 7 +------
 drivers/pci/controller/dwc/pcie-designware.h      | 1 +
 2 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 372207c33a857b4c98572bb1e9b61fa0080bc871..2c8056761addf7febc1b0e06ddf8ba4dd4ad1684 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -1157,15 +1157,10 @@ static int dw_pcie_pme_turn_off(struct dw_pcie *pci)
 
 int dw_pcie_suspend_noirq(struct dw_pcie *pci)
 {
-	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	u32 val;
 	int ret;
 
-	/*
-	 * If L1SS is supported, then do not put the link into L2 as some
-	 * devices such as NVMe expect low resume latency.
-	 */
-	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
+	if (!pci_host_common_can_enter_d3cold(pci->pp.bridge))
 		return 0;
 
 	if (pci->pp.ops->pme_turn_off) {
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 31685951a080456b8834aab2bf79a36c78f46639..18d8f7d5d23088b2fa177e84a21d900c98850fcd 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -26,6 +26,7 @@
 #include <linux/pci-epc.h>
 #include <linux/pci-epf.h>
 
+#include "../pci-host-common.h"
 #include "../../pci.h"
 
 /* DWC PCIe IP-core versions (native support since v4.70a) */

-- 
2.34.1