From: Szymon Durawa <szymon.durawa@linux.intel.com>
To: helgaas@kernel.org, nirmal.patel@linux.intel.com,
szymon.durawa@linux.intel.com, djbw@kernel.org,
linux-pci@vger.kernel.org, lukas@wunner.de
Subject: [PATCH v6 6/8] PCI: vmd: Convert bus and busn_start to an array
Date: Thu, 6 Aug 2026 22:13:45 +0000 [thread overview]
Message-ID: <20260806221351.38592-7-szymon.durawa@linux.intel.com> (raw)
In-Reply-To: <20260806221351.38592-1-szymon.durawa@linux.intel.com>
Convert bus and busn_start from scalar to an array to support
multiple VMD buses in the future. No functional changes.
Suggested-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Szymon Durawa <szymon.durawa@linux.intel.com>
---
drivers/pci/controller/vmd.c | 50 +++++++++++++++++++++---------------
1 file changed, 29 insertions(+), 21 deletions(-)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 78e8bdf7c3d7..786374965f74 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -49,6 +49,11 @@ enum vmd_resource {
VMD_RES_COUNT
};
+enum vmd_rootbus {
+ VMD_BUS_0 = 0,
+ VMD_BUS_COUNT
+};
+
enum vmd_features {
/*
* Device may contain registers which hint the physical location of the
@@ -149,8 +154,8 @@ struct vmd_dev {
struct pci_sysdata sysdata;
struct resource resources[VMD_RES_COUNT];
struct irq_domain *irq_domain;
- struct pci_bus *bus;
- u8 busn_start;
+ struct pci_bus *bus[VMD_BUS_COUNT];
+ u8 busn_start[VMD_BUS_COUNT];
u8 first_vec;
char *name;
int instance;
@@ -404,7 +409,7 @@ static void vmd_remove_irq_domain(struct vmd_dev *vmd)
static void __iomem *vmd_cfg_addr(struct vmd_dev *vmd, struct pci_bus *bus,
unsigned int devfn, int reg, int len)
{
- unsigned int busnr_ecam = bus->number - vmd->busn_start;
+ unsigned int busnr_ecam = bus->number - vmd->busn_start[VMD_BUS_0];
u32 offset = PCIE_ECAM_OFFSET(busnr_ecam, devfn, reg);
if (offset + len >= resource_size(&vmd->dev->resource[VMD_CFGBAR]))
@@ -655,13 +660,13 @@ static int vmd_get_bus_number_start(struct vmd_dev *vmd)
switch (BUS_RESTRICT_CFG(reg)) {
case 0:
- vmd->busn_start = VMD_RESTRICT_0_BUS_START;
+ vmd->busn_start[VMD_BUS_0] = VMD_RESTRICT_0_BUS_START;
break;
case 1:
- vmd->busn_start = VMD_RESTRICT_1_BUS_START;
+ vmd->busn_start[VMD_BUS_0] = VMD_RESTRICT_1_BUS_START;
break;
case 2:
- vmd->busn_start = VMD_RESTRICT_2_BUS_START;
+ vmd->busn_start[VMD_BUS_0] = VMD_RESTRICT_2_BUS_START;
break;
default:
pci_err(dev, "Unknown Bus Offset Setting (%d)\n",
@@ -789,8 +794,9 @@ static void vmd_configure_cfgbar(struct vmd_dev *vmd)
vmd->resources[VMD_RES_CFGBAR] = (struct resource){
.name = "VMD CFGBAR",
- .start = vmd->busn_start,
- .end = vmd->busn_start + (resource_size(res) >> 20) - 1,
+ .start = vmd->busn_start[VMD_BUS_0],
+ .end = vmd->busn_start[VMD_BUS_0] +
+ (resource_size(res) >> 20) - 1,
.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
};
}
@@ -844,11 +850,11 @@ static int vmd_configure_membar1_membar2(struct vmd_dev *vmd,
{
int ret;
- ret = vmd_configure_membar(vmd, 1, VMD_MEMBAR1, 0, 0);
+ ret = vmd_configure_membar(vmd, VMD_RES_MBAR_1, VMD_MEMBAR1, 0, 0);
if (ret)
return ret;
- ret = vmd_configure_membar(vmd, 2, VMD_MEMBAR2, mbar2_ofs, 0);
+ ret = vmd_configure_membar(vmd, VMD_RES_MBAR_2, VMD_MEMBAR2, mbar2_ofs, 0);
if (ret) {
devm_kfree(&vmd->dev->dev, (void *)vmd->resources[VMD_RES_MBAR_1].name);
memset(&vmd->resources[VMD_RES_MBAR_1], 0, sizeof(vmd->resources[VMD_RES_MBAR_1]));
@@ -869,21 +875,22 @@ static int vmd_create_bus(struct vmd_dev *vmd, struct pci_sysdata *sd,
pci_add_resource_offset(&resources, &vmd->resources[VMD_RES_MBAR_2],
offset[1]);
- vmd->bus = pci_create_root_bus(&vmd->dev->dev, vmd->busn_start,
- &vmd_ops, sd, &resources);
- if (!vmd->bus) {
+ vmd->bus[VMD_BUS_0] = pci_create_root_bus(&vmd->dev->dev,
+ vmd->busn_start[VMD_BUS_0],
+ &vmd_ops, sd, &resources);
+ if (!vmd->bus[VMD_BUS_0]) {
pci_free_resource_list(&resources);
return -ENODEV;
}
vmd_copy_host_bridge_flags(pci_find_host_bridge(vmd->dev->bus),
- to_pci_host_bridge(vmd->bus->bridge));
+ to_pci_host_bridge(vmd->bus[VMD_BUS_0]->bridge));
vmd_attach_resources(vmd);
if (vmd->irq_domain)
- dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
+ dev_set_msi_domain(&vmd->bus[VMD_BUS_0]->dev, vmd->irq_domain);
else
- dev_set_msi_domain(&vmd->bus->dev,
+ dev_set_msi_domain(&vmd->bus[VMD_BUS_0]->dev,
dev_get_msi_domain(&vmd->dev->dev));
return 0;
@@ -1037,10 +1044,11 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
return ret;
}
- WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,
- "domain"), "Can't create symlink to domain\n");
+ WARN(sysfs_create_link(&vmd->dev->dev.kobj,
+ &vmd->bus[VMD_BUS_0]->dev.kobj, "domain"),
+ "Can't create symlink to domain\n");
- vmd_bus_enumeration(vmd->bus, features);
+ vmd_bus_enumeration(vmd->bus[VMD_BUS_0], features);
return 0;
}
@@ -1136,9 +1144,9 @@ static void vmd_remove(struct pci_dev *dev)
{
struct vmd_dev *vmd = pci_get_drvdata(dev);
- pci_stop_root_bus(vmd->bus);
+ pci_stop_root_bus(vmd->bus[VMD_BUS_0]);
sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
- pci_remove_root_bus(vmd->bus);
+ pci_remove_root_bus(vmd->bus[VMD_BUS_0]);
vmd_cleanup_srcu(vmd);
vmd_detach_resources(vmd);
vmd_remove_irq_domain(vmd);
--
2.43.0
next prev parent reply other threads:[~2026-08-06 19:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-06 22:13 [PATCH v6 0/8] VMD add second root bus support Szymon Durawa
2026-08-06 22:13 ` [PATCH v6 1/8] PCI: vmd: Add vmd_bus_enumeration() helper function Szymon Durawa
2026-08-06 20:11 ` sashiko-bot
2026-08-06 22:13 ` [PATCH v6 2/8] PCI: vmd: Add vmd_configure_cfgbar() " Szymon Durawa
2026-08-06 20:02 ` sashiko-bot
2026-08-06 22:13 ` [PATCH v6 3/8] PCI: vmd: Add vmd_configure_membar() and vmd_configure_membar1_membar2() Szymon Durawa
2026-08-06 20:05 ` sashiko-bot
2026-08-06 22:13 ` [PATCH v6 4/8] PCI: vmd: Add vmd_create_bus() Szymon Durawa
2026-08-06 20:10 ` sashiko-bot
2026-08-06 22:13 ` [PATCH v6 5/8] PCI: vmd: Replace hardcoded values with enum and defines Szymon Durawa
2026-08-06 20:04 ` sashiko-bot
2026-08-06 22:13 ` Szymon Durawa [this message]
2026-08-06 20:03 ` [PATCH v6 6/8] PCI: vmd: Convert bus and busn_start to an array sashiko-bot
2026-08-06 22:13 ` [PATCH v6 7/8] PCI: vmd: Add support for second rootbus under VMD Szymon Durawa
2026-08-06 20:15 ` sashiko-bot
2026-08-06 22:13 ` [PATCH v6 8/8] PCI: vmd: Add workaround for bus number hardwired to fixed non-zero value Szymon Durawa
2026-08-06 20:22 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260806221351.38592-7-szymon.durawa@linux.intel.com \
--to=szymon.durawa@linux.intel.com \
--cc=djbw@kernel.org \
--cc=helgaas@kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=nirmal.patel@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox