From: sashiko-bot@kernel.org
To: "Shameer Kolothum" <skolothumtho@nvidia.com>
Cc: kvm@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [RFC PATCH 02/19] vfio/pci: Serialize generic device lifetime with recovery
Date: Tue, 01 Sep 2026 09:47:35 +0000 [thread overview]
Message-ID: <20260901094735.915D91F000E9@smtp.kernel.org> (raw)
In-Reply-To: <20260901093217.8539-3-skolothumtho@nvidia.com>
> vfio_pci_core_disable() frees vconfig while holding only the vfio
> device_set mutex. The PCI error callbacks never take that one. They run
> under the PCI device_lock instead, and vfio's close path does not hold
> that. So a callback still running when close starts can walk into state
> which is being freed.
>
> Publish a device_open flag under recovery_lock. enable() clears it before
> it touches the device, finish_enable() sets it once vfio_config_init()
> has allocated vconfig, and prepare_close() clears it again before the
> teardown frees vconfig. All three take recovery_lock for writing, so a
> callback either gets there first and close waits for it, or it finds the
> flag clear and does nothing. The access guards added later test the same
> flag.
>
> recovery_lock is not held across vfio_pci_core_disable(). A later patch
> has error_detected() take it from under pci_bus_sem, and disable() gets
> to pci_reset_bus(), which takes pci_bus_sem the other way round.
>
> access_blocked is only ever set while device_open is set. Nothing sets it
> without testing device_open first, and close clears access_blocked before
> it clears device_open. If close left it set, nothing could clear it
> afterwards.
> The transaction which set it cannot clear it once device_open is gone,
> and every path which refuses work on a blocked device would go on
> refusing. Clear it before device_open so a lock-free reader never sees
> it set on a device which is closed.
>
> open() now refuses a disconnected device with -ENODEV. That is new.
>
> Signed-off-by: Shameer Kolothum <skolothumtho@nvidia.com>
Sashiko has reviewed this patch and found no issues. It looks great!
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260901093217.8539-1-skolothumtho@nvidia.com?part=2
next prev parent reply other threads:[~2026-09-01 9:47 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 9:31 [RFC PATCH 00/19] vfio/pci: Handle PCI error recovery and report state to userspace Shameer Kolothum
2026-09-01 9:31 ` [RFC PATCH 01/19] vfio/pci: Add PCI error recovery support state Shameer Kolothum
2026-09-01 9:45 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 02/19] vfio/pci: Serialize generic device lifetime with recovery Shameer Kolothum
2026-09-01 9:47 ` sashiko-bot [this message]
2026-09-01 13:14 ` K V P, Satyanarayana
2026-09-01 13:37 ` Shameer Kolothum Thodi
2026-09-01 9:32 ` [RFC PATCH 03/19] vfio/pci: Add PCI recovery access guards Shameer Kolothum
2026-09-01 9:39 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 04/19] vfio/pci: Serialize function reset with recovery Shameer Kolothum
2026-09-01 9:45 ` sashiko-bot
2026-09-02 6:06 ` K V P, Satyanarayana
2026-09-03 11:20 ` Shameer Kolothum Thodi
2026-09-01 9:32 ` [RFC PATCH 05/19] vfio/pci: Serialize config access " Shameer Kolothum
2026-09-01 9:46 ` sashiko-bot
2026-09-02 6:27 ` K V P, Satyanarayana
2026-09-03 11:08 ` Shameer Kolothum Thodi
2026-09-01 9:32 ` [RFC PATCH 06/19] vfio/pci: Serialize ioeventfd writes " Shameer Kolothum
2026-09-01 9:43 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 07/19] vfio/pci: Retry BAR faults after temporary recovery Shameer Kolothum
2026-09-01 9:47 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 08/19] vfio/pci: Serialize BAR and ROM access with recovery Shameer Kolothum
2026-09-01 9:48 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 09/19] vfio/pci: Serialize interrupt operations " Shameer Kolothum
2026-09-01 9:42 ` sashiko-bot
2026-09-03 6:34 ` K V P, Satyanarayana
2026-09-03 10:39 ` Shameer Kolothum Thodi
2026-09-01 9:32 ` [RFC PATCH 10/19] vfio/pci: Serialize hot reset " Shameer Kolothum
2026-09-01 9:58 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 11/19] vfio/pci: Serialize runtime PM " Shameer Kolothum
2026-09-01 9:49 ` sashiko-bot
2026-09-03 6:43 ` K V P, Satyanarayana
2026-09-03 10:47 ` Shameer Kolothum Thodi
2026-09-01 9:32 ` [RFC PATCH 12/19] vfio/pci: Serialize physical device information queries " Shameer Kolothum
2026-09-01 9:48 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 13/19] vfio/pci: Serialize DMA-BUF export " Shameer Kolothum
2026-09-01 9:43 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 14/19] vfio/pci: Add generic PCI error slot reset handling Shameer Kolothum
2026-09-01 9:53 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 15/19] vfio/pci: Add INTx helpers for PCI recovery Shameer Kolothum
2026-09-01 9:59 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 16/19] vfio/pci: Quiesce INTx during " Shameer Kolothum
2026-09-01 9:53 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 17/19] vfio/pci: Add generic PCI error resume handling Shameer Kolothum
2026-09-01 9:55 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 18/19] vfio/pci: Coordinate generic device access with host recovery Shameer Kolothum
2026-09-01 9:56 ` sashiko-bot
2026-09-01 9:32 ` [RFC PATCH 19/19] vfio/pci: Expose and enable host PCI error recovery Shameer Kolothum
2026-09-01 9:56 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260901094735.915D91F000E9@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=skolothumtho@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox