[PATCH v5 4/9] PCI: rzg3s-host: Drop nop instructions

[Claudiu Beznea <claudiu.beznea@kernel.org>]

From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

On the RZ/G3S PCIe IP variant (which is similar to those used on the
RZ/G3E, RZ/V2H, and RZ/V2N SoCs), access to the PCIe Type 1 registers
requires setting the PCI_PERM.CFG_HWINIT_EN bit. Since this bit is not
set on the code paths where rzg3s_pcie_set_max_link_speed() is called,
the writes to PCI_EXP_LNKCTL2.TLS are nops. Drop them.

Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---

Changes in v5:
- collected tags

Changes in v4:
- none

Changes in v3:
- none, this patch is new

 drivers/pci/controller/pcie-rzg3s-host.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/pci/controller/pcie-rzg3s-host.c b/drivers/pci/controller/pcie-rzg3s-host.c
index 0ef49bb5ab1a..362aa923978f 100644
--- a/drivers/pci/controller/pcie-rzg3s-host.c
+++ b/drivers/pci/controller/pcie-rzg3s-host.c
@@ -1144,11 +1144,6 @@ static int rzg3s_pcie_set_max_link_speed(struct rzg3s_pcie_host *host)
 	    remote_supported_link_speeds != max_supported_link_speeds)
 		return 0;
 
-	/* Set target Link speed */
-	rzg3s_pcie_update_bits(host->pcie, pcie_cap + PCI_EXP_LNKCTL2,
-			       PCI_EXP_LNKCTL2_TLS,
-			       FIELD_PREP(PCI_EXP_LNKCTL2_TLS, link_speed));
-
 	/* Request link speed change */
 	rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PCCTRL2,
 			       RZG3S_PCI_PCCTRL2_LS_CHG_REQ |
-- 
2.43.0