Linux PCI subsystem development
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: sashiko-reviews@lists.linux.dev
Cc: linux-pci@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-rdma@vger.kernel.org, kvm@vger.kernel.org,
	media-ci@linuxtv.org
Subject: Re: [PATCH v11 10/19] PCI/P2PDMA: Reject Translated Requests blocked by Translation Blocking
Date: Wed, 14 Oct 2026 09:50:51 +0300	[thread overview]
Message-ID: <20261014065051.GV219304@unreal> (raw)
In-Reply-To: <sashiko-outbox-169939@kernel.org>

On Tue, Oct 13, 2026 at 02:49:05PM +0000, sashiko-bot@kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
> - [High] pci/p2pdma: deadlock in calc_map_type_and_dist() due to non-IRQ-safe xa_store()
> --
> 
> commit f019da119f00a99a75cbfe2deec0db131a89232d
> Author: Leon Romanovsky <leon@kernel.org>
> 
> PCI/P2PDMA: Reject Translated Requests blocked by Translation Blocking
>     
> ACS Translation Blocking rejects upstream Memory Requests with a Translated
> address before any peer-routing controls apply, per PCIe r7.0 sec 6.12.1.1.
> P2PDMA ignores that bit and can report a route whose ports reject the
> Requester's address type.
>     
> Add PCI_ACS_P2PDMA_BLOCKED and scan the ports traversed by each route. A
> direct route passes only ports below the divergence; a host-bridge route
> also passes the common port and its ancestors. Reject the affected class
> without falling back to another route, and preserve blocking precedence
> over internal-route restrictions.
> 
> > diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
> > index 785e4668a2af5..fc4dea28c8606 100644
> > --- a/drivers/pci/p2pdma.c
> > +++ b/drivers/pci/p2pdma.c
> [ ... ]
> > @@ -1162,6 +1252,11 @@ calc_map_type_and_dist(struct pci_dev *provider, struct pci_dev *client,
> >  		}
> >  	}
> >  
> > +	path.tb_on_path = pci_p2pdma_path_blocks_translation(client, a);
> > +	if (b_child)
> > +		path.tb_above_divergence =
> > +			pci_p2pdma_path_blocks_translation(b_child, NULL);
> > +
> >  	/*
> >  	 * The walk and the config reads above serve every class; only the
> >  	 * decision below depends on the kind of TLP being routed.
> 
> [Severity: High]
> Does xa_store() use an IRQ-safe lock here?

Same, this not-safe path is not taken in current codebase.

Thanks

  reply	other threads:[~2026-10-14  6:50 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-13 14:25 [PATCH v11 00/19] PCI/P2PDMA: Route peer-to-peer DMA by TLP class Leon Romanovsky
2026-10-13 14:25 ` [PATCH v11 01/19] PCI/P2PDMA: Honor device-specific ACS redirection Leon Romanovsky
2026-10-13 14:44   ` sashiko-bot
2026-10-14  6:49     ` Leon Romanovsky
2026-10-13 14:25 ` [PATCH v11 02/19] PCI/P2PDMA: Document the TLP attribute assumptions Leon Romanovsky
2026-10-13 14:28   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 03/19] PCI/P2PDMA: Derive routing from directional ACS controls Leon Romanovsky
2026-10-13 14:32   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 04/19] PCI: Reject unreadable ACS controls in isolation checks Leon Romanovsky
2026-10-13 14:37   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 05/19] PCI/P2PDMA: Evaluate ACS controls at the path divergence Leon Romanovsky
2026-10-13 14:38   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 06/19] PCI/P2PDMA: Document directional ACS routing Leon Romanovsky
2026-10-13 14:28   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 07/19] PCI/P2PDMA: Collect the path's ACS controls before deciding Leon Romanovsky
2026-10-13 14:32   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 08/19] PCI/P2PDMA: Answer routing per TLP class Leon Romanovsky
2026-10-13 14:34   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 09/19] PCI/P2PDMA: Route Relaxed Ordering Completions directly Leon Romanovsky
2026-10-13 14:37   ` sashiko-bot
2026-10-14  6:46     ` Leon Romanovsky
2026-10-13 14:25 ` [PATCH v11 10/19] PCI/P2PDMA: Reject Translated Requests blocked by Translation Blocking Leon Romanovsky
2026-10-13 14:49   ` sashiko-bot
2026-10-14  6:50     ` Leon Romanovsky [this message]
2026-10-13 14:25 ` [PATCH v11 11/19] PCI/P2PDMA: Route Translated Requests under Direct Translated P2P Leon Romanovsky
2026-10-13 14:36   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 12/19] PCI/P2PDMA: Log detailed ACS routing diagnostics Leon Romanovsky
2026-10-13 14:40   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 13/19] PCI/P2PDMA: Add KUnit tests for the ACS routing decisions Leon Romanovsky
2026-10-13 14:40   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 14/19] PCI/P2PDMA: Test the ACS P2P routing walk Leon Romanovsky
2026-10-13 14:49   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 15/19] PCI: Add KUnit coverage for ACS isolation checks Leon Romanovsky
2026-10-13 14:44   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 16/19] PCI/P2PDMA: Document TLP-class routing Leon Romanovsky
2026-10-13 14:39   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 17/19] PCI/P2PDMA: Let a client declare that it selects ATS per mapping Leon Romanovsky
2026-10-13 14:47   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 18/19] PCI/P2PDMA: Evaluate the ATS path for clients with ATS enabled Leon Romanovsky
2026-10-13 14:47   ` sashiko-bot
2026-10-13 14:25 ` [PATCH v11 19/19] PCI/P2PDMA: Test the routing of " Leon Romanovsky
2026-10-13 14:47   ` sashiko-bot
2026-10-14  6:53 ` [PATCH v11 00/19] PCI/P2PDMA: Route peer-to-peer DMA by TLP class Leon Romanovsky
2026-10-14 13:23   ` Bjorn Helgaas
2026-10-14 14:49     ` Leon Romanovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261014065051.GV219304@unreal \
    --to=leon@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=media-ci@linuxtv.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox