Re: [PATCH v6 1/2] dt-bindings: PCI: dw: rockchip: Add rk3576 support

[Kever Yang <kever.yang@rock-chips.com>]

Hi Krzysztof,

     Thanks for your review.

On 2025/2/24 17:28, Krzysztof Kozlowski wrote:
> On Mon, Feb 24, 2025 at 03:49:27PM +0800, Kever Yang wrote:
>> rk3576 is using DWC PCIe controller, with msi interrupt directly to GIC
>> instead of using GIC ITS, so
>> - no ITS support is required and the 'msi-map' is not required,
>> - a new 'msi' interrupt is needed.
>>
>> Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
>> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
>> ---
>>
>> Changes in v6:
>> - Fix make dt_binding_check and make CHECK_DTBS=y
>>
>> Changes in v5:
>> - Add constraints per device for interrupt-names due to the interrupt is
>> different from rk3588.
>>
>> Changes in v4:
>> - Fix wrong indentation in dt_binding_check report by Rob
>>
>> Changes in v3:
>> - Fix dtb check broken on rk3588
>> - Update commit message
>>
>> Changes in v2:
>> - remove required 'msi-map'
>> - add interrupt name 'msi'
>>
>>   .../bindings/pci/rockchip-dw-pcie-common.yaml | 41 ++++++++++++++++++-
>>   .../bindings/pci/rockchip-dw-pcie.yaml        | 19 ++++++---
>>   2 files changed, 52 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
>> index cc9adfc7611c..e1ca8e2f35fe 100644
>> --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
>> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml
>> @@ -65,7 +65,11 @@ properties:
>>             tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
>>             nf_err_rx, f_err_rx, radm_qoverflow
>>         - description:
>> -          eDMA write channel 0 interrupt
>> +          If the matching interrupt name is "msi", then this is the combinded
>> +          MSI line interrupt, which is to support MSI interrupts output to GIC
>> +          controller via GIC SPI interrupt instead of GIC its interrupt.
>> +          If the matching interrupt name is "dma0", then this is the eDMA write
>> +          channel 0 interrupt.
>>         - description:
>>             eDMA write channel 1 interrupt
>>         - description:
>> @@ -81,7 +85,9 @@ properties:
>>         - const: msg
>>         - const: legacy
>>         - const: err
>> -      - const: dma0
>> +      - enum:
>> +          - msi
>> +          - dma0
>>         - const: dma1
>>         - const: dma2
>>         - const: dma3
>> @@ -123,4 +129,35 @@ required:
>>   
>>   additionalProperties: true
>>   
>> +anyOf:
> There is never syntax like that. Where did you find it (so we can fix
> it)?
>
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: rockchip,rk3576-pcie
> This does not belong to common schema, but to device specific. I don't
> see this compatible in this common schema at all.

The common schema covers rockchip-dw-pcie.yaml and rockchip-dw-pcie-ep.yaml,

so I though I should add the if condition here.


>
>> +    then:
>> +      properties:
> interrupts:
>    minItems: 6
>    maxItems: 6
Will add this back.

Thanks,
- Kever
>> +        interrupt-names:
>> +          items:
>> +            - const: sys
>> +            - const: pmc
>> +            - const: msg
>> +            - const: legacy
>> +            - const: err
> Best regards,
> Krzysztof
>
>