* [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest
@ 2025-01-16 13:51 Manivannan Sadhasivam
2025-01-16 13:51 ` [PATCH v5 1/4] PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test Manivannan Sadhasivam
` (4 more replies)
0 siblings, 5 replies; 12+ messages in thread
From: Manivannan Sadhasivam @ 2025-01-16 13:51 UTC (permalink / raw)
To: kw, gregkh, arnd, lpieralisi, shuah
Cc: kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh,
linux-kselftest, cassel, Manivannan Sadhasivam
Hi,
This series carries forward the effort to add Kselftest for PCI Endpoint
Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version
based on another patch that fixes the return values of IOCTLs in
pci_endpoint_test driver and did many cleanups. Since the resulting work
modified the initial version substantially, I took over the authorship.
This series also incorporates the review comment by Shuah Khan [2] to move the
existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before
migrating to Kselftest framework. I made sure that the tests are executable in
each commit and updated documentation accordingly.
- Mani
[1] https://lore.kernel.org/linux-pci/20221007053934.5188-1-aman1.gupta@samsung.com
[2] https://lore.kernel.org/linux-pci/b2a5db97-dc59-33ab-71cd-f591e0b1b34d@linuxfoundation.org
Changes in v5:
* Incorporated comments from Niklas
* Added a patch to fix the DMA MEMCPY check in pci-epf-test driver
* Collected tags
* Rebased on top of pci/next 0333f56dbbf7ef6bb46d2906766c3e1b2a04a94d
Changes in v4:
* Dropped the BAR fix patches and submitted them separately:
https://lore.kernel.org/linux-pci/20241231130224.38206-1-manivannan.sadhasivam@linaro.org/
* Rebased on top of pci/next 9e1b45d7a5bc0ad20f6b5267992da422884b916e
Changes in v3:
* Collected tags.
* Added a note about failing testcase 10 and command to skip it in
documentation.
* Removed Aman Gupta and Padmanabhan Rajanbabu from CC as their addresses are
bouncing.
Changes in v2:
* Added a patch that fixes return values of IOCTL in pci_endpoint_test driver
* Moved the existing tests to new location before migrating
* Added a fix for BARs on Qcom devices
* Updated documentation and also added fixture variants for memcpy & DMA modes
Manivannan Sadhasivam (4):
PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test
misc: pci_endpoint_test: Fix the return value of IOCTL
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
selftests: pci_endpoint: Migrate to Kselftest framework
Documentation/PCI/endpoint/pci-test-howto.rst | 170 +++++------
MAINTAINERS | 2 +-
drivers/misc/pci_endpoint_test.c | 255 +++++++++--------
drivers/pci/endpoint/functions/pci-epf-test.c | 4 +-
tools/pci/Build | 1 -
tools/pci/Makefile | 58 ----
tools/pci/pcitest.c | 264 ------------------
tools/pci/pcitest.sh | 73 -----
tools/testing/selftests/Makefile | 1 +
.../testing/selftests/pci_endpoint/.gitignore | 2 +
tools/testing/selftests/pci_endpoint/Makefile | 7 +
tools/testing/selftests/pci_endpoint/config | 4 +
.../pci_endpoint/pci_endpoint_test.c | 221 +++++++++++++++
13 files changed, 435 insertions(+), 627 deletions(-)
delete mode 100644 tools/pci/Build
delete mode 100644 tools/pci/Makefile
delete mode 100644 tools/pci/pcitest.c
delete mode 100644 tools/pci/pcitest.sh
create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore
create mode 100644 tools/testing/selftests/pci_endpoint/Makefile
create mode 100644 tools/testing/selftests/pci_endpoint/config
create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread* [PATCH v5 1/4] PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test 2025-01-16 13:51 [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Manivannan Sadhasivam @ 2025-01-16 13:51 ` Manivannan Sadhasivam 2025-01-16 15:10 ` Niklas Cassel 2025-01-16 13:51 ` [PATCH v5 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL Manivannan Sadhasivam ` (3 subsequent siblings) 4 siblings, 1 reply; 12+ messages in thread From: Manivannan Sadhasivam @ 2025-01-16 13:51 UTC (permalink / raw) To: kw, gregkh, arnd, lpieralisi, shuah Cc: kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest, cassel, Manivannan Sadhasivam Currently, if DMA MEMCPY test is requested by the host, and if the endpoint DMA controller supports DMA_PRIVATE, the test will fail. This is not correct since there is no check for DMA_MEMCPY capability and the DMA controller can support both DMA_PRIVATE and DMA_MEMCPY. So fix the check and also reword the error message. Reported-by: Niklas Cassel <cassel@kernel.org> Closes: https://lore.kernel.org/linux-pci/Z3QtEihbiKIGogWA@ryzen Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/pci/endpoint/functions/pci-epf-test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c index ffb534a8e50a..b94e205ae10b 100644 --- a/drivers/pci/endpoint/functions/pci-epf-test.c +++ b/drivers/pci/endpoint/functions/pci-epf-test.c @@ -331,8 +331,8 @@ static void pci_epf_test_copy(struct pci_epf_test *epf_test, void *copy_buf = NULL, *buf; if (reg->flags & FLAG_USE_DMA) { - if (epf_test->dma_private) { - dev_err(dev, "Cannot transfer data using DMA\n"); + if (!dma_has_cap(DMA_MEMCPY, epf_test->dma_chan_tx->device->cap_mask)) { + dev_err(dev, "DMA controller doesn't support MEMCPY\n"); ret = -EINVAL; goto set_status; } -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v5 1/4] PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test 2025-01-16 13:51 ` [PATCH v5 1/4] PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test Manivannan Sadhasivam @ 2025-01-16 15:10 ` Niklas Cassel 0 siblings, 0 replies; 12+ messages in thread From: Niklas Cassel @ 2025-01-16 15:10 UTC (permalink / raw) To: Manivannan Sadhasivam Cc: kw, gregkh, arnd, lpieralisi, shuah, kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest On Thu, Jan 16, 2025 at 07:21:03PM +0530, Manivannan Sadhasivam wrote: > Currently, if DMA MEMCPY test is requested by the host, and if the endpoint > DMA controller supports DMA_PRIVATE, the test will fail. This is not > correct since there is no check for DMA_MEMCPY capability and the DMA > controller can support both DMA_PRIVATE and DMA_MEMCPY. > > So fix the check and also reword the error message. > > Reported-by: Niklas Cassel <cassel@kernel.org> > Closes: https://lore.kernel.org/linux-pci/Z3QtEihbiKIGogWA@ryzen > Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > drivers/pci/endpoint/functions/pci-epf-test.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c > index ffb534a8e50a..b94e205ae10b 100644 > --- a/drivers/pci/endpoint/functions/pci-epf-test.c > +++ b/drivers/pci/endpoint/functions/pci-epf-test.c > @@ -331,8 +331,8 @@ static void pci_epf_test_copy(struct pci_epf_test *epf_test, > void *copy_buf = NULL, *buf; > > if (reg->flags & FLAG_USE_DMA) { > - if (epf_test->dma_private) { > - dev_err(dev, "Cannot transfer data using DMA\n"); > + if (!dma_has_cap(DMA_MEMCPY, epf_test->dma_chan_tx->device->cap_mask)) { > + dev_err(dev, "DMA controller doesn't support MEMCPY\n"); > ret = -EINVAL; > goto set_status; > } > -- > 2.25.1 > Reviewed-by: Niklas Cassel <cassel@kernel.org> ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v5 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL 2025-01-16 13:51 [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Manivannan Sadhasivam 2025-01-16 13:51 ` [PATCH v5 1/4] PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test Manivannan Sadhasivam @ 2025-01-16 13:51 ` Manivannan Sadhasivam 2025-01-16 13:51 ` [PATCH v5 3/4] selftests: Move PCI Endpoint tests from tools/pci to Kselftests Manivannan Sadhasivam ` (2 subsequent siblings) 4 siblings, 0 replies; 12+ messages in thread From: Manivannan Sadhasivam @ 2025-01-16 13:51 UTC (permalink / raw) To: kw, gregkh, arnd, lpieralisi, shuah Cc: kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest, cassel, Manivannan Sadhasivam, Damien Le Moal IOCTLs are supposed to return 0 for success and negative error codes for failure. Currently, this driver is returning 0 for failure and 1 for success, that's not correct. Hence, fix it! Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Closes: https://lore.kernel.org/all/YvzNg5ROnxEApDgS@kroah.com Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device") Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/misc/pci_endpoint_test.c | 255 +++++++++++++++---------------- tools/pci/pcitest.c | 51 ++++--- 2 files changed, 153 insertions(+), 153 deletions(-) diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c index abe6c8f03fca..906658acff0f 100644 --- a/drivers/misc/pci_endpoint_test.c +++ b/drivers/misc/pci_endpoint_test.c @@ -169,43 +169,47 @@ static void pci_endpoint_test_free_irq_vectors(struct pci_endpoint_test *test) test->irq_type = IRQ_TYPE_UNDEFINED; } -static bool pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test, +static int pci_endpoint_test_alloc_irq_vectors(struct pci_endpoint_test *test, int type) { - int irq = -1; + int irq; struct pci_dev *pdev = test->pdev; struct device *dev = &pdev->dev; - bool res = true; switch (type) { case IRQ_TYPE_INTX: irq = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_INTX); - if (irq < 0) + if (irq < 0) { dev_err(dev, "Failed to get Legacy interrupt\n"); + return irq; + } + break; case IRQ_TYPE_MSI: irq = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI); - if (irq < 0) + if (irq < 0) { dev_err(dev, "Failed to get MSI interrupts\n"); + return irq; + } + break; case IRQ_TYPE_MSIX: irq = pci_alloc_irq_vectors(pdev, 1, 2048, PCI_IRQ_MSIX); - if (irq < 0) + if (irq < 0) { dev_err(dev, "Failed to get MSI-X interrupts\n"); + return irq; + } + break; default: dev_err(dev, "Invalid IRQ type selected\n"); - } - - if (irq < 0) { - irq = 0; - res = false; + return -EINVAL; } test->irq_type = type; test->num_irqs = irq; - return res; + return 0; } static void pci_endpoint_test_release_irq(struct pci_endpoint_test *test) @@ -220,22 +224,22 @@ static void pci_endpoint_test_release_irq(struct pci_endpoint_test *test) test->num_irqs = 0; } -static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test) +static int pci_endpoint_test_request_irq(struct pci_endpoint_test *test) { int i; - int err; + int ret; struct pci_dev *pdev = test->pdev; struct device *dev = &pdev->dev; for (i = 0; i < test->num_irqs; i++) { - err = devm_request_irq(dev, pci_irq_vector(pdev, i), + ret = devm_request_irq(dev, pci_irq_vector(pdev, i), pci_endpoint_test_irqhandler, IRQF_SHARED, test->name, test); - if (err) + if (ret) goto fail; } - return true; + return 0; fail: switch (irq_type) { @@ -255,7 +259,7 @@ static bool pci_endpoint_test_request_irq(struct pci_endpoint_test *test) break; } - return false; + return ret; } static const u32 bar_test_pattern[] = { @@ -280,7 +284,7 @@ static int pci_endpoint_test_bar_memcmp(struct pci_endpoint_test *test, return memcmp(write_buf, read_buf, size); } -static bool pci_endpoint_test_bar(struct pci_endpoint_test *test, +static int pci_endpoint_test_bar(struct pci_endpoint_test *test, enum pci_barno barno) { int j, buf_size, iters; @@ -290,7 +294,7 @@ static bool pci_endpoint_test_bar(struct pci_endpoint_test *test, resource_size_t bar_size; if (!test->bar[barno]) - return false; + return -ENOMEM; bar_size = pci_resource_len(pdev, barno); @@ -305,19 +309,19 @@ static bool pci_endpoint_test_bar(struct pci_endpoint_test *test, write_buf = kmalloc(buf_size, GFP_KERNEL); if (!write_buf) - return false; + return -ENOMEM; read_buf = kmalloc(buf_size, GFP_KERNEL); if (!read_buf) - return false; + return -ENOMEM; iters = div_u64(bar_size, buf_size); for (j = 0; j < iters; j++) if (pci_endpoint_test_bar_memcmp(test, barno, buf_size * j, write_buf, read_buf, buf_size)) - return false; + return -EIO; - return true; + return 0; } static u32 bar_test_pattern_with_offset(enum pci_barno barno, int offset) @@ -332,7 +336,7 @@ static u32 bar_test_pattern_with_offset(enum pci_barno barno, int offset) return val; } -static bool pci_endpoint_test_bars_write_bar(struct pci_endpoint_test *test, +static void pci_endpoint_test_bars_write_bar(struct pci_endpoint_test *test, enum pci_barno barno) { struct pci_dev *pdev = test->pdev; @@ -346,11 +350,9 @@ static bool pci_endpoint_test_bars_write_bar(struct pci_endpoint_test *test, for (j = 0; j < size; j += 4) writel_relaxed(bar_test_pattern_with_offset(barno, j), test->bar[barno] + j); - - return true; } -static bool pci_endpoint_test_bars_read_bar(struct pci_endpoint_test *test, +static int pci_endpoint_test_bars_read_bar(struct pci_endpoint_test *test, enum pci_barno barno) { struct pci_dev *pdev = test->pdev; @@ -371,14 +373,14 @@ static bool pci_endpoint_test_bars_read_bar(struct pci_endpoint_test *test, dev_err(dev, "BAR%d incorrect data at offset: %#x, got: %#x expected: %#x\n", barno, j, val, expected); - return false; + return -EIO; } } - return true; + return 0; } -static bool pci_endpoint_test_bars(struct pci_endpoint_test *test) +static int pci_endpoint_test_bars(struct pci_endpoint_test *test) { enum pci_barno bar; bool ret; @@ -402,10 +404,10 @@ static bool pci_endpoint_test_bars(struct pci_endpoint_test *test) } } - return true; + return 0; } -static bool pci_endpoint_test_intx_irq(struct pci_endpoint_test *test) +static int pci_endpoint_test_intx_irq(struct pci_endpoint_test *test) { u32 val; @@ -417,16 +419,17 @@ static bool pci_endpoint_test_intx_irq(struct pci_endpoint_test *test) val = wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000)); if (!val) - return false; + return -ETIMEDOUT; - return true; + return 0; } -static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test, +static int pci_endpoint_test_msi_irq(struct pci_endpoint_test *test, u16 msi_num, bool msix) { - u32 val; struct pci_dev *pdev = test->pdev; + u32 val; + int ret; pci_endpoint_test_writel(test, PCI_ENDPOINT_TEST_IRQ_TYPE, msix ? IRQ_TYPE_MSIX : IRQ_TYPE_MSI); @@ -437,9 +440,16 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test, val = wait_for_completion_timeout(&test->irq_raised, msecs_to_jiffies(1000)); if (!val) - return false; + return -ETIMEDOUT; - return pci_irq_vector(pdev, msi_num - 1) == test->last_irq; + ret = pci_irq_vector(pdev, msi_num - 1); + if (ret < 0) + return ret; + + if (ret != test->last_irq) + return -EIO; + + return 0; } static int pci_endpoint_test_validate_xfer_params(struct device *dev, @@ -458,11 +468,10 @@ static int pci_endpoint_test_validate_xfer_params(struct device *dev, return 0; } -static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, +static int pci_endpoint_test_copy(struct pci_endpoint_test *test, unsigned long arg) { struct pci_endpoint_test_xfer_param param; - bool ret = false; void *src_addr; void *dst_addr; u32 flags = 0; @@ -481,17 +490,17 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, int irq_type = test->irq_type; u32 src_crc32; u32 dst_crc32; - int err; + int ret; - err = copy_from_user(¶m, (void __user *)arg, sizeof(param)); - if (err) { + ret = copy_from_user(¶m, (void __user *)arg, sizeof(param)); + if (ret) { dev_err(dev, "Failed to get transfer param\n"); - return false; + return -EFAULT; } - err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); - if (err) - return false; + ret = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (ret) + return ret; size = param.size; @@ -501,22 +510,21 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, if (irq_type < IRQ_TYPE_INTX || irq_type > IRQ_TYPE_MSIX) { dev_err(dev, "Invalid IRQ type option\n"); - goto err; + return -EINVAL; } orig_src_addr = kzalloc(size + alignment, GFP_KERNEL); if (!orig_src_addr) { dev_err(dev, "Failed to allocate source buffer\n"); - ret = false; - goto err; + return -ENOMEM; } get_random_bytes(orig_src_addr, size + alignment); orig_src_phys_addr = dma_map_single(dev, orig_src_addr, size + alignment, DMA_TO_DEVICE); - if (dma_mapping_error(dev, orig_src_phys_addr)) { + ret = dma_mapping_error(dev, orig_src_phys_addr); + if (ret) { dev_err(dev, "failed to map source buffer address\n"); - ret = false; goto err_src_phys_addr; } @@ -540,15 +548,15 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, orig_dst_addr = kzalloc(size + alignment, GFP_KERNEL); if (!orig_dst_addr) { dev_err(dev, "Failed to allocate destination address\n"); - ret = false; + ret = -ENOMEM; goto err_dst_addr; } orig_dst_phys_addr = dma_map_single(dev, orig_dst_addr, size + alignment, DMA_FROM_DEVICE); - if (dma_mapping_error(dev, orig_dst_phys_addr)) { + ret = dma_mapping_error(dev, orig_dst_phys_addr); + if (ret) { dev_err(dev, "failed to map destination buffer address\n"); - ret = false; goto err_dst_phys_addr; } @@ -581,8 +589,8 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, DMA_FROM_DEVICE); dst_crc32 = crc32_le(~0, dst_addr, size); - if (dst_crc32 == src_crc32) - ret = true; + if (dst_crc32 != src_crc32) + ret = -EIO; err_dst_phys_addr: kfree(orig_dst_addr); @@ -593,16 +601,13 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test, err_src_phys_addr: kfree(orig_src_addr); - -err: return ret; } -static bool pci_endpoint_test_write(struct pci_endpoint_test *test, +static int pci_endpoint_test_write(struct pci_endpoint_test *test, unsigned long arg) { struct pci_endpoint_test_xfer_param param; - bool ret = false; u32 flags = 0; bool use_dma; u32 reg; @@ -617,17 +622,17 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, int irq_type = test->irq_type; size_t size; u32 crc32; - int err; + int ret; - err = copy_from_user(¶m, (void __user *)arg, sizeof(param)); - if (err != 0) { + ret = copy_from_user(¶m, (void __user *)arg, sizeof(param)); + if (ret) { dev_err(dev, "Failed to get transfer param\n"); - return false; + return -EFAULT; } - err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); - if (err) - return false; + ret = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (ret) + return ret; size = param.size; @@ -637,23 +642,22 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, if (irq_type < IRQ_TYPE_INTX || irq_type > IRQ_TYPE_MSIX) { dev_err(dev, "Invalid IRQ type option\n"); - goto err; + return -EINVAL; } orig_addr = kzalloc(size + alignment, GFP_KERNEL); if (!orig_addr) { dev_err(dev, "Failed to allocate address\n"); - ret = false; - goto err; + return -ENOMEM; } get_random_bytes(orig_addr, size + alignment); orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment, DMA_TO_DEVICE); - if (dma_mapping_error(dev, orig_phys_addr)) { + ret = dma_mapping_error(dev, orig_phys_addr); + if (ret) { dev_err(dev, "failed to map source buffer address\n"); - ret = false; goto err_phys_addr; } @@ -686,24 +690,21 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test, wait_for_completion(&test->irq_raised); reg = pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_STATUS); - if (reg & STATUS_READ_SUCCESS) - ret = true; + if (!(reg & STATUS_READ_SUCCESS)) + ret = -EIO; dma_unmap_single(dev, orig_phys_addr, size + alignment, DMA_TO_DEVICE); err_phys_addr: kfree(orig_addr); - -err: return ret; } -static bool pci_endpoint_test_read(struct pci_endpoint_test *test, +static int pci_endpoint_test_read(struct pci_endpoint_test *test, unsigned long arg) { struct pci_endpoint_test_xfer_param param; - bool ret = false; u32 flags = 0; bool use_dma; size_t size; @@ -717,17 +718,17 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, size_t alignment = test->alignment; int irq_type = test->irq_type; u32 crc32; - int err; + int ret; - err = copy_from_user(¶m, (void __user *)arg, sizeof(param)); - if (err) { + ret = copy_from_user(¶m, (void __user *)arg, sizeof(param)); + if (ret) { dev_err(dev, "Failed to get transfer param\n"); - return false; + return -EFAULT; } - err = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); - if (err) - return false; + ret = pci_endpoint_test_validate_xfer_params(dev, ¶m, alignment); + if (ret) + return ret; size = param.size; @@ -737,21 +738,20 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, if (irq_type < IRQ_TYPE_INTX || irq_type > IRQ_TYPE_MSIX) { dev_err(dev, "Invalid IRQ type option\n"); - goto err; + return -EINVAL; } orig_addr = kzalloc(size + alignment, GFP_KERNEL); if (!orig_addr) { dev_err(dev, "Failed to allocate destination address\n"); - ret = false; - goto err; + return -ENOMEM; } orig_phys_addr = dma_map_single(dev, orig_addr, size + alignment, DMA_FROM_DEVICE); - if (dma_mapping_error(dev, orig_phys_addr)) { + ret = dma_mapping_error(dev, orig_phys_addr); + if (ret) { dev_err(dev, "failed to map source buffer address\n"); - ret = false; goto err_phys_addr; } @@ -783,50 +783,51 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test, DMA_FROM_DEVICE); crc32 = crc32_le(~0, addr, size); - if (crc32 == pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM)) - ret = true; + if (crc32 != pci_endpoint_test_readl(test, PCI_ENDPOINT_TEST_CHECKSUM)) + ret = -EIO; err_phys_addr: kfree(orig_addr); -err: return ret; } -static bool pci_endpoint_test_clear_irq(struct pci_endpoint_test *test) +static int pci_endpoint_test_clear_irq(struct pci_endpoint_test *test) { pci_endpoint_test_release_irq(test); pci_endpoint_test_free_irq_vectors(test); - return true; + + return 0; } -static bool pci_endpoint_test_set_irq(struct pci_endpoint_test *test, +static int pci_endpoint_test_set_irq(struct pci_endpoint_test *test, int req_irq_type) { struct pci_dev *pdev = test->pdev; struct device *dev = &pdev->dev; + int ret; if (req_irq_type < IRQ_TYPE_INTX || req_irq_type > IRQ_TYPE_MSIX) { dev_err(dev, "Invalid IRQ type option\n"); - return false; + return -EINVAL; } if (test->irq_type == req_irq_type) - return true; + return 0; pci_endpoint_test_release_irq(test); pci_endpoint_test_free_irq_vectors(test); - if (!pci_endpoint_test_alloc_irq_vectors(test, req_irq_type)) - goto err; + ret = pci_endpoint_test_alloc_irq_vectors(test, req_irq_type); + if (ret) + return ret; - if (!pci_endpoint_test_request_irq(test)) - goto err; - - return true; + ret = pci_endpoint_test_request_irq(test); + if (ret) { + pci_endpoint_test_free_irq_vectors(test); + return ret; + } -err: - pci_endpoint_test_free_irq_vectors(test); - return false; + return 0; } static long pci_endpoint_test_ioctl(struct file *file, unsigned int cmd, @@ -908,7 +909,7 @@ static void pci_endpoint_test_get_capabilities(struct pci_endpoint_test *test) static int pci_endpoint_test_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { - int err; + int ret; int id; char name[24]; enum pci_barno bar; @@ -947,24 +948,23 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48)); - err = pci_enable_device(pdev); - if (err) { + ret = pci_enable_device(pdev); + if (ret) { dev_err(dev, "Cannot enable PCI device\n"); - return err; + return ret; } - err = pci_request_regions(pdev, DRV_MODULE_NAME); - if (err) { + ret = pci_request_regions(pdev, DRV_MODULE_NAME); + if (ret) { dev_err(dev, "Cannot obtain PCI resources\n"); goto err_disable_pdev; } pci_set_master(pdev); - if (!pci_endpoint_test_alloc_irq_vectors(test, irq_type)) { - err = -EINVAL; + ret = pci_endpoint_test_alloc_irq_vectors(test, irq_type); + if (ret) goto err_disable_irq; - } for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) { if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) { @@ -979,7 +979,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, test->base = test->bar[test_reg_bar]; if (!test->base) { - err = -ENOMEM; + ret = -ENOMEM; dev_err(dev, "Cannot perform PCI test without BAR%d\n", test_reg_bar); goto err_iounmap; @@ -989,7 +989,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, id = ida_alloc(&pci_endpoint_test_ida, GFP_KERNEL); if (id < 0) { - err = id; + ret = id; dev_err(dev, "Unable to get id\n"); goto err_iounmap; } @@ -997,14 +997,13 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id); test->name = kstrdup(name, GFP_KERNEL); if (!test->name) { - err = -ENOMEM; + ret = -ENOMEM; goto err_ida_remove; } - if (!pci_endpoint_test_request_irq(test)) { - err = -EINVAL; + ret = pci_endpoint_test_request_irq(test); + if (ret) goto err_kfree_test_name; - } pci_endpoint_test_get_capabilities(test); @@ -1012,14 +1011,14 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, misc_device->minor = MISC_DYNAMIC_MINOR; misc_device->name = kstrdup(name, GFP_KERNEL); if (!misc_device->name) { - err = -ENOMEM; + ret = -ENOMEM; goto err_release_irq; } misc_device->parent = &pdev->dev; misc_device->fops = &pci_endpoint_test_fops; - err = misc_register(misc_device); - if (err) { + ret = misc_register(misc_device); + if (ret) { dev_err(dev, "Failed to register device\n"); goto err_kfree_name; } @@ -1051,7 +1050,7 @@ static int pci_endpoint_test_probe(struct pci_dev *pdev, err_disable_pdev: pci_disable_device(pdev); - return err; + return ret; } static void pci_endpoint_test_remove(struct pci_dev *pdev) diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c index 08f355083754..b96cc118839b 100644 --- a/tools/pci/pcitest.c +++ b/tools/pci/pcitest.c @@ -16,7 +16,6 @@ #include <linux/pcitest.h> -static char *result[] = { "NOT OKAY", "OKAY" }; static char *irq[] = { "LEGACY", "MSI", "MSI-X" }; struct pci_test { @@ -53,72 +52,74 @@ static int run_test(struct pci_test *test) ret = ioctl(fd, PCITEST_BAR, test->barnum); fprintf(stdout, "BAR%d:\t\t", test->barnum); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->consecutive_bar_test) { ret = ioctl(fd, PCITEST_BARS); fprintf(stdout, "Consecutive BAR test:\t\t"); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->set_irqtype) { ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype); fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]); if (ret < 0) - fprintf(stdout, "FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->get_irqtype) { ret = ioctl(fd, PCITEST_GET_IRQTYPE); fprintf(stdout, "GET IRQ TYPE:\t\t"); - if (ret < 0) - fprintf(stdout, "FAILED\n"); - else + if (ret < 0) { + fprintf(stdout, "NOT OKAY\n"); + } else { fprintf(stdout, "%s\n", irq[ret]); + ret = 0; + } } if (test->clear_irq) { ret = ioctl(fd, PCITEST_CLEAR_IRQ); fprintf(stdout, "CLEAR IRQ:\t\t"); if (ret < 0) - fprintf(stdout, "FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->legacyirq) { ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0); fprintf(stdout, "LEGACY IRQ:\t"); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->msinum > 0 && test->msinum <= 32) { ret = ioctl(fd, PCITEST_MSI, test->msinum); fprintf(stdout, "MSI%u:\t\t", test->msinum); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->msixnum > 0 && test->msixnum <= 2048) { ret = ioctl(fd, PCITEST_MSIX, test->msixnum); fprintf(stdout, "MSI-X%u:\t\t", test->msixnum); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->write) { @@ -128,9 +129,9 @@ static int run_test(struct pci_test *test) ret = ioctl(fd, PCITEST_WRITE, ¶m); fprintf(stdout, "WRITE (%7lu bytes):\t\t", test->size); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->read) { @@ -140,9 +141,9 @@ static int run_test(struct pci_test *test) ret = ioctl(fd, PCITEST_READ, ¶m); fprintf(stdout, "READ (%7lu bytes):\t\t", test->size); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } if (test->copy) { @@ -152,14 +153,14 @@ static int run_test(struct pci_test *test) ret = ioctl(fd, PCITEST_COPY, ¶m); fprintf(stdout, "COPY (%7lu bytes):\t\t", test->size); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "NOT OKAY\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "OKAY\n"); } fflush(stdout); close(fd); - return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */ + return ret; } int main(int argc, char **argv) -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v5 3/4] selftests: Move PCI Endpoint tests from tools/pci to Kselftests 2025-01-16 13:51 [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Manivannan Sadhasivam 2025-01-16 13:51 ` [PATCH v5 1/4] PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test Manivannan Sadhasivam 2025-01-16 13:51 ` [PATCH v5 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL Manivannan Sadhasivam @ 2025-01-16 13:51 ` Manivannan Sadhasivam 2025-01-16 15:39 ` Niklas Cassel 2025-01-16 13:51 ` [PATCH v5 4/4] selftests: pci_endpoint: Migrate to Kselftest framework Manivannan Sadhasivam 2025-01-16 15:36 ` [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Niklas Cassel 4 siblings, 1 reply; 12+ messages in thread From: Manivannan Sadhasivam @ 2025-01-16 13:51 UTC (permalink / raw) To: kw, gregkh, arnd, lpieralisi, shuah Cc: kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest, cassel, Manivannan Sadhasivam This just moves the existing tests under tools/pci to tools/testing/selftests/pci_endpoint and adjusts the paths in Makefile accordingly. Migration to Kselftest framework will be done in subsequent commits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- Documentation/PCI/endpoint/pci-test-howto.rst | 9 +++++---- MAINTAINERS | 2 +- tools/testing/selftests/pci_endpoint/.gitignore | 3 +++ tools/{pci => testing/selftests/pci_endpoint}/Build | 0 tools/{pci => testing/selftests/pci_endpoint}/Makefile | 10 +++++----- .../{pci => testing/selftests/pci_endpoint}/pcitest.c | 0 .../{pci => testing/selftests/pci_endpoint}/pcitest.sh | 0 7 files changed, 14 insertions(+), 10 deletions(-) create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore rename tools/{pci => testing/selftests/pci_endpoint}/Build (100%) rename tools/{pci => testing/selftests/pci_endpoint}/Makefile (83%) rename tools/{pci => testing/selftests/pci_endpoint}/pcitest.c (100%) rename tools/{pci => testing/selftests/pci_endpoint}/pcitest.sh (100%) diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst index 909f770a07d6..c4ae7af50ede 100644 --- a/Documentation/PCI/endpoint/pci-test-howto.rst +++ b/Documentation/PCI/endpoint/pci-test-howto.rst @@ -123,16 +123,17 @@ above:: Using Endpoint Test function Device ----------------------------------- -pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint -tests. To compile this tool the following commands should be used:: +pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all +the default PCI endpoint tests. To compile this tool the following commands +should be used:: # cd <kernel-dir> - # make -C tools/pci + # make -C tools/testing/selftests/pci_endpoint or if you desire to compile and install in your system:: # cd <kernel-dir> - # make -C tools/pci install + # make -C tools/testing/selftests/pci_endpoint install The tool and script will be located in <rootfs>/usr/bin/ diff --git a/MAINTAINERS b/MAINTAINERS index e0fcdd8b6434..e96e80d8486d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18002,7 +18002,7 @@ F: Documentation/PCI/endpoint/* F: Documentation/misc-devices/pci-endpoint-test.rst F: drivers/misc/pci_endpoint_test.c F: drivers/pci/endpoint/ -F: tools/pci/ +F: tools/testing/selftests/pci_endpoint/ PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC M: Mahesh J Salgaonkar <mahesh@linux.ibm.com> diff --git a/tools/testing/selftests/pci_endpoint/.gitignore b/tools/testing/selftests/pci_endpoint/.gitignore new file mode 100644 index 000000000000..29ab47c48484 --- /dev/null +++ b/tools/testing/selftests/pci_endpoint/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +*.o +pcitest diff --git a/tools/pci/Build b/tools/testing/selftests/pci_endpoint/Build similarity index 100% rename from tools/pci/Build rename to tools/testing/selftests/pci_endpoint/Build diff --git a/tools/pci/Makefile b/tools/testing/selftests/pci_endpoint/Makefile similarity index 83% rename from tools/pci/Makefile rename to tools/testing/selftests/pci_endpoint/Makefile index 62d41f1a1e2c..3c6fe18e32cc 100644 --- a/tools/pci/Makefile +++ b/tools/testing/selftests/pci_endpoint/Makefile @@ -1,11 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 -include ../scripts/Makefile.include +include ../../../scripts/Makefile.include bindir ?= /usr/bin ifeq ($(srctree),) -srctree := $(patsubst %/,%,$(dir $(CURDIR))) -srctree := $(patsubst %/,%,$(dir $(srctree))) +srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) endif # Do not use make's built-in rules @@ -27,10 +26,11 @@ include $(srctree)/tools/build/Makefile.include # # We need the following to be outside of kernel tree # -$(OUTPUT)include/linux/: ../../include/uapi/linux/ +$(OUTPUT)include/linux/: ../../../../include/uapi/linux/ mkdir -p $(OUTPUT)include/linux/ 2>&1 || true - ln -sf $(CURDIR)/../../include/uapi/linux/pcitest.h $@ + ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@ +$(info ${CURDIR}) prepare: $(OUTPUT)include/linux/ PCITEST_IN := $(OUTPUT)pcitest-in.o diff --git a/tools/pci/pcitest.c b/tools/testing/selftests/pci_endpoint/pcitest.c similarity index 100% rename from tools/pci/pcitest.c rename to tools/testing/selftests/pci_endpoint/pcitest.c diff --git a/tools/pci/pcitest.sh b/tools/testing/selftests/pci_endpoint/pcitest.sh similarity index 100% rename from tools/pci/pcitest.sh rename to tools/testing/selftests/pci_endpoint/pcitest.sh -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v5 3/4] selftests: Move PCI Endpoint tests from tools/pci to Kselftests 2025-01-16 13:51 ` [PATCH v5 3/4] selftests: Move PCI Endpoint tests from tools/pci to Kselftests Manivannan Sadhasivam @ 2025-01-16 15:39 ` Niklas Cassel 0 siblings, 0 replies; 12+ messages in thread From: Niklas Cassel @ 2025-01-16 15:39 UTC (permalink / raw) To: Manivannan Sadhasivam Cc: kw, gregkh, arnd, lpieralisi, shuah, kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest On Thu, Jan 16, 2025 at 07:21:05PM +0530, Manivannan Sadhasivam wrote: > This just moves the existing tests under tools/pci to > tools/testing/selftests/pci_endpoint and adjusts the paths in Makefile > accordingly. Migration to Kselftest framework will be done in subsequent > commits. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > Documentation/PCI/endpoint/pci-test-howto.rst | 9 +++++---- > MAINTAINERS | 2 +- > tools/testing/selftests/pci_endpoint/.gitignore | 3 +++ > tools/{pci => testing/selftests/pci_endpoint}/Build | 0 > tools/{pci => testing/selftests/pci_endpoint}/Makefile | 10 +++++----- > .../{pci => testing/selftests/pci_endpoint}/pcitest.c | 0 > .../{pci => testing/selftests/pci_endpoint}/pcitest.sh | 0 > 7 files changed, 14 insertions(+), 10 deletions(-) > create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore > rename tools/{pci => testing/selftests/pci_endpoint}/Build (100%) > rename tools/{pci => testing/selftests/pci_endpoint}/Makefile (83%) > rename tools/{pci => testing/selftests/pci_endpoint}/pcitest.c (100%) > rename tools/{pci => testing/selftests/pci_endpoint}/pcitest.sh (100%) > > diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst > index 909f770a07d6..c4ae7af50ede 100644 > --- a/Documentation/PCI/endpoint/pci-test-howto.rst > +++ b/Documentation/PCI/endpoint/pci-test-howto.rst > @@ -123,16 +123,17 @@ above:: > Using Endpoint Test function Device > ----------------------------------- > > -pcitest.sh added in tools/pci/ can be used to run all the default PCI endpoint > -tests. To compile this tool the following commands should be used:: > +pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all > +the default PCI endpoint tests. To compile this tool the following commands > +should be used:: > > # cd <kernel-dir> > - # make -C tools/pci > + # make -C tools/testing/selftests/pci_endpoint > > or if you desire to compile and install in your system:: > > # cd <kernel-dir> > - # make -C tools/pci install > + # make -C tools/testing/selftests/pci_endpoint install > > The tool and script will be located in <rootfs>/usr/bin/ > > diff --git a/MAINTAINERS b/MAINTAINERS > index e0fcdd8b6434..e96e80d8486d 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -18002,7 +18002,7 @@ F: Documentation/PCI/endpoint/* > F: Documentation/misc-devices/pci-endpoint-test.rst > F: drivers/misc/pci_endpoint_test.c > F: drivers/pci/endpoint/ > -F: tools/pci/ > +F: tools/testing/selftests/pci_endpoint/ > > PCI ENHANCED ERROR HANDLING (EEH) FOR POWERPC > M: Mahesh J Salgaonkar <mahesh@linux.ibm.com> > diff --git a/tools/testing/selftests/pci_endpoint/.gitignore b/tools/testing/selftests/pci_endpoint/.gitignore > new file mode 100644 > index 000000000000..29ab47c48484 > --- /dev/null > +++ b/tools/testing/selftests/pci_endpoint/.gitignore > @@ -0,0 +1,3 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +*.o > +pcitest > diff --git a/tools/pci/Build b/tools/testing/selftests/pci_endpoint/Build > similarity index 100% > rename from tools/pci/Build > rename to tools/testing/selftests/pci_endpoint/Build > diff --git a/tools/pci/Makefile b/tools/testing/selftests/pci_endpoint/Makefile > similarity index 83% > rename from tools/pci/Makefile > rename to tools/testing/selftests/pci_endpoint/Makefile > index 62d41f1a1e2c..3c6fe18e32cc 100644 > --- a/tools/pci/Makefile > +++ b/tools/testing/selftests/pci_endpoint/Makefile > @@ -1,11 +1,10 @@ > # SPDX-License-Identifier: GPL-2.0 > -include ../scripts/Makefile.include > +include ../../../scripts/Makefile.include > > bindir ?= /usr/bin > > ifeq ($(srctree),) > -srctree := $(patsubst %/,%,$(dir $(CURDIR))) > -srctree := $(patsubst %/,%,$(dir $(srctree))) > +srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) > endif > > # Do not use make's built-in rules > @@ -27,10 +26,11 @@ include $(srctree)/tools/build/Makefile.include > # > # We need the following to be outside of kernel tree > # > -$(OUTPUT)include/linux/: ../../include/uapi/linux/ > +$(OUTPUT)include/linux/: ../../../../include/uapi/linux/ > mkdir -p $(OUTPUT)include/linux/ 2>&1 || true > - ln -sf $(CURDIR)/../../include/uapi/linux/pcitest.h $@ > + ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@ > > +$(info ${CURDIR}) > prepare: $(OUTPUT)include/linux/ > > PCITEST_IN := $(OUTPUT)pcitest-in.o > diff --git a/tools/pci/pcitest.c b/tools/testing/selftests/pci_endpoint/pcitest.c > similarity index 100% > rename from tools/pci/pcitest.c > rename to tools/testing/selftests/pci_endpoint/pcitest.c > diff --git a/tools/pci/pcitest.sh b/tools/testing/selftests/pci_endpoint/pcitest.sh > similarity index 100% > rename from tools/pci/pcitest.sh > rename to tools/testing/selftests/pci_endpoint/pcitest.sh > -- > 2.25.1 > Reviewed-by: Niklas Cassel <cassel@kernel.org> ^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v5 4/4] selftests: pci_endpoint: Migrate to Kselftest framework 2025-01-16 13:51 [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Manivannan Sadhasivam ` (2 preceding siblings ...) 2025-01-16 13:51 ` [PATCH v5 3/4] selftests: Move PCI Endpoint tests from tools/pci to Kselftests Manivannan Sadhasivam @ 2025-01-16 13:51 ` Manivannan Sadhasivam 2025-01-16 15:39 ` Niklas Cassel 2025-01-16 15:36 ` [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Niklas Cassel 4 siblings, 1 reply; 12+ messages in thread From: Manivannan Sadhasivam @ 2025-01-16 13:51 UTC (permalink / raw) To: kw, gregkh, arnd, lpieralisi, shuah Cc: kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest, cassel, Manivannan Sadhasivam, Aman Gupta, Padmanabhan Rajanbabu Migrate the PCI endpoint test to Kselftest framework. All the tests that were part of the previous pcitest.sh file were migrated. Below is the exclusive list of tests: 1. BAR0 Test 2. BAR1 Test 3. BAR2 Test 4. BAR3 Test 5. BAR4 Test 6. BAR5 Test 7. Consecutive BAR Tests 8. Legacy IRQ Tests 9. MSI Interrupt Tests (MSI1 to MSI32) 10. MSI-X Interrupt Tests (MSI-X1 to MSI-X2048) 11. Read Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) 12. Write Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) 13. Copy Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) 14. Read Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes) 15. Write Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes) 16. Copy Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes) BAR, DMA and MEMCPY tests are added as fixture variants and can be executed separately as below: $ pci_endpoint_test -v BAR0 $ pci_endpoint_test -v dma $ pci_endpoint_test -v memcpy Co-developed-by: Aman Gupta <aman1.gupta@samsung.com> Signed-off-by: Aman Gupta <aman1.gupta@samsung.com> Co-developed-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> [mani: reworked based on the IOCTL fix, cleanups, documentation, commit message] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- Documentation/PCI/endpoint/pci-test-howto.rst | 169 +++++------ tools/testing/selftests/Makefile | 1 + .../testing/selftests/pci_endpoint/.gitignore | 3 +- tools/testing/selftests/pci_endpoint/Build | 1 - tools/testing/selftests/pci_endpoint/Makefile | 59 +--- tools/testing/selftests/pci_endpoint/config | 4 + .../pci_endpoint/pci_endpoint_test.c | 221 +++++++++++++++ .../testing/selftests/pci_endpoint/pcitest.c | 265 ------------------ .../testing/selftests/pci_endpoint/pcitest.sh | 73 ----- 9 files changed, 300 insertions(+), 496 deletions(-) delete mode 100644 tools/testing/selftests/pci_endpoint/Build create mode 100644 tools/testing/selftests/pci_endpoint/config create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.c delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.sh diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst index c4ae7af50ede..7d0dbad61456 100644 --- a/Documentation/PCI/endpoint/pci-test-howto.rst +++ b/Documentation/PCI/endpoint/pci-test-howto.rst @@ -123,9 +123,9 @@ above:: Using Endpoint Test function Device ----------------------------------- -pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all -the default PCI endpoint tests. To compile this tool the following commands -should be used:: +Kselftest added in tools/testing/selftests/pci_endpoint can be used to run all +the default PCI endpoint tests. To build the Kselftest for PCI endpoint +subsystem, the following commands should be used:: # cd <kernel-dir> # make -C tools/testing/selftests/pci_endpoint @@ -133,104 +133,73 @@ should be used:: or if you desire to compile and install in your system:: # cd <kernel-dir> - # make -C tools/testing/selftests/pci_endpoint install + # make -C tools/testing/selftests/pci_endpoint INSTALL_PATH=/usr/bin install -The tool and script will be located in <rootfs>/usr/bin/ +The test will be located in <rootfs>/usr/bin/ - -pcitest.sh Output -~~~~~~~~~~~~~~~~~ +Kselftest Output +~~~~~~~~~~~~~~~~ :: - # pcitest.sh - BAR tests - - BAR0: OKAY - BAR1: OKAY - BAR2: OKAY - BAR3: OKAY - BAR4: NOT OKAY - BAR5: NOT OKAY - - Interrupt tests - - SET IRQ TYPE TO LEGACY: OKAY - LEGACY IRQ: NOT OKAY - SET IRQ TYPE TO MSI: OKAY - MSI1: OKAY - MSI2: OKAY - MSI3: OKAY - MSI4: OKAY - MSI5: OKAY - MSI6: OKAY - MSI7: OKAY - MSI8: OKAY - MSI9: OKAY - MSI10: OKAY - MSI11: OKAY - MSI12: OKAY - MSI13: OKAY - MSI14: OKAY - MSI15: OKAY - MSI16: OKAY - MSI17: NOT OKAY - MSI18: NOT OKAY - MSI19: NOT OKAY - MSI20: NOT OKAY - MSI21: NOT OKAY - MSI22: NOT OKAY - MSI23: NOT OKAY - MSI24: NOT OKAY - MSI25: NOT OKAY - MSI26: NOT OKAY - MSI27: NOT OKAY - MSI28: NOT OKAY - MSI29: NOT OKAY - MSI30: NOT OKAY - MSI31: NOT OKAY - MSI32: NOT OKAY - SET IRQ TYPE TO MSI-X: OKAY - MSI-X1: OKAY - MSI-X2: OKAY - MSI-X3: OKAY - MSI-X4: OKAY - MSI-X5: OKAY - MSI-X6: OKAY - MSI-X7: OKAY - MSI-X8: OKAY - MSI-X9: NOT OKAY - MSI-X10: NOT OKAY - MSI-X11: NOT OKAY - MSI-X12: NOT OKAY - MSI-X13: NOT OKAY - MSI-X14: NOT OKAY - MSI-X15: NOT OKAY - MSI-X16: NOT OKAY - [...] - MSI-X2047: NOT OKAY - MSI-X2048: NOT OKAY - - Read Tests - - SET IRQ TYPE TO MSI: OKAY - READ ( 1 bytes): OKAY - READ ( 1024 bytes): OKAY - READ ( 1025 bytes): OKAY - READ (1024000 bytes): OKAY - READ (1024001 bytes): OKAY - - Write Tests - - WRITE ( 1 bytes): OKAY - WRITE ( 1024 bytes): OKAY - WRITE ( 1025 bytes): OKAY - WRITE (1024000 bytes): OKAY - WRITE (1024001 bytes): OKAY - - Copy Tests - - COPY ( 1 bytes): OKAY - COPY ( 1024 bytes): OKAY - COPY ( 1025 bytes): OKAY - COPY (1024000 bytes): OKAY - COPY (1024001 bytes): OKAY + # pci_endpoint_test + TAP version 13 + 1..16 + # Starting 16 tests from 9 test cases. + # RUN pci_ep_bar.BAR0.BAR_TEST ... + # OK pci_ep_bar.BAR0.BAR_TEST + ok 1 pci_ep_bar.BAR0.BAR_TEST + # RUN pci_ep_bar.BAR1.BAR_TEST ... + # OK pci_ep_bar.BAR1.BAR_TEST + ok 2 pci_ep_bar.BAR1.BAR_TEST + # RUN pci_ep_bar.BAR2.BAR_TEST ... + # OK pci_ep_bar.BAR2.BAR_TEST + ok 3 pci_ep_bar.BAR2.BAR_TEST + # RUN pci_ep_bar.BAR3.BAR_TEST ... + # OK pci_ep_bar.BAR3.BAR_TEST + ok 4 pci_ep_bar.BAR3.BAR_TEST + # RUN pci_ep_bar.BAR4.BAR_TEST ... + # OK pci_ep_bar.BAR4.BAR_TEST + ok 5 pci_ep_bar.BAR4.BAR_TEST + # RUN pci_ep_bar.BAR5.BAR_TEST ... + # OK pci_ep_bar.BAR5.BAR_TEST + ok 6 pci_ep_bar.BAR5.BAR_TEST + # RUN pci_ep_basic.CONSECUTIVE_BAR_TEST ... + # OK pci_ep_basic.CONSECUTIVE_BAR_TEST + ok 7 pci_ep_basic.CONSECUTIVE_BAR_TEST + # RUN pci_ep_basic.LEGACY_IRQ_TEST ... + # OK pci_ep_basic.LEGACY_IRQ_TEST + ok 8 pci_ep_basic.LEGACY_IRQ_TEST + # RUN pci_ep_basic.MSI_TEST ... + # OK pci_ep_basic.MSI_TEST + ok 9 pci_ep_basic.MSI_TEST + # RUN pci_ep_basic.MSIX_TEST ... + # OK pci_ep_basic.MSIX_TEST + ok 10 pci_ep_basic.MSIX_TEST + # RUN pci_ep_data_transfer.memcpy.READ_TEST ... + # OK pci_ep_data_transfer.memcpy.READ_TEST + ok 11 pci_ep_data_transfer.memcpy.READ_TEST + # RUN pci_ep_data_transfer.memcpy.WRITE_TEST ... + # OK pci_ep_data_transfer.memcpy.WRITE_TEST + ok 12 pci_ep_data_transfer.memcpy.WRITE_TEST + # RUN pci_ep_data_transfer.memcpy.COPY_TEST ... + # OK pci_ep_data_transfer.memcpy.COPY_TEST + ok 13 pci_ep_data_transfer.memcpy.COPY_TEST + # RUN pci_ep_data_transfer.dma.READ_TEST ... + # OK pci_ep_data_transfer.dma.READ_TEST + ok 14 pci_ep_data_transfer.dma.READ_TEST + # RUN pci_ep_data_transfer.dma.WRITE_TEST ... + # OK pci_ep_data_transfer.dma.WRITE_TEST + ok 15 pci_ep_data_transfer.dma.WRITE_TEST + # RUN pci_ep_data_transfer.dma.COPY_TEST ... + # OK pci_ep_data_transfer.dma.COPY_TEST + ok 16 pci_ep_data_transfer.dma.COPY_TEST + # PASSED: 16 / 16 tests passed. + # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:0 error:0 + + +Testcase 16 (pci_ep_data_transfer.dma.COPY_TEST) will fail for most of the DMA +capable endpoint controllers due to the absence of the MEMCPY over DMA. For such +controllers, it is advisable to skip the forementioned testcase using below +command:: + + # pci_endpoint_test -f pci_ep_bar -f pci_ep_basic -v memcpy -T COPY_TEST -v dma diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 2401e973c359..50931cd6aff2 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -72,6 +72,7 @@ TARGETS += net/packetdrill TARGETS += net/rds TARGETS += net/tcp_ao TARGETS += nsfs +TARGETS += pci_endpoint TARGETS += pcie_bwctrl TARGETS += perf_events TARGETS += pidfd diff --git a/tools/testing/selftests/pci_endpoint/.gitignore b/tools/testing/selftests/pci_endpoint/.gitignore index 29ab47c48484..6a4837a3e034 100644 --- a/tools/testing/selftests/pci_endpoint/.gitignore +++ b/tools/testing/selftests/pci_endpoint/.gitignore @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only -*.o -pcitest +pci_endpoint_test diff --git a/tools/testing/selftests/pci_endpoint/Build b/tools/testing/selftests/pci_endpoint/Build deleted file mode 100644 index c375aea21790..000000000000 --- a/tools/testing/selftests/pci_endpoint/Build +++ /dev/null @@ -1 +0,0 @@ -pcitest-y += pcitest.o diff --git a/tools/testing/selftests/pci_endpoint/Makefile b/tools/testing/selftests/pci_endpoint/Makefile index 3c6fe18e32cc..bf21ebf20b4a 100644 --- a/tools/testing/selftests/pci_endpoint/Makefile +++ b/tools/testing/selftests/pci_endpoint/Makefile @@ -1,58 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 -include ../../../scripts/Makefile.include +CFLAGS += -O2 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES) +LDFLAGS += -lrt -lpthread -lm -bindir ?= /usr/bin +TEST_GEN_PROGS = pci_endpoint_test -ifeq ($(srctree),) -srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) -endif - -# Do not use make's built-in rules -# (this improves performance and avoids hard-to-debug behaviour); -MAKEFLAGS += -r - -CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include - -ALL_TARGETS := pcitest -ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS)) - -SCRIPTS := pcitest.sh - -all: $(ALL_PROGRAMS) - -export srctree OUTPUT CC LD CFLAGS -include $(srctree)/tools/build/Makefile.include - -# -# We need the following to be outside of kernel tree -# -$(OUTPUT)include/linux/: ../../../../include/uapi/linux/ - mkdir -p $(OUTPUT)include/linux/ 2>&1 || true - ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@ - -$(info ${CURDIR}) -prepare: $(OUTPUT)include/linux/ - -PCITEST_IN := $(OUTPUT)pcitest-in.o -$(PCITEST_IN): prepare FORCE - $(Q)$(MAKE) $(build)=pcitest -$(OUTPUT)pcitest: $(PCITEST_IN) - $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@ - -clean: - rm -f $(ALL_PROGRAMS) - rm -rf $(OUTPUT)include/ - find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete - -install: $(ALL_PROGRAMS) - install -d -m 755 $(DESTDIR)$(bindir); \ - for program in $(ALL_PROGRAMS); do \ - install $$program $(DESTDIR)$(bindir); \ - done; \ - for script in $(SCRIPTS); do \ - install $$script $(DESTDIR)$(bindir); \ - done - -FORCE: - -.PHONY: all install clean FORCE prepare +include ../lib.mk diff --git a/tools/testing/selftests/pci_endpoint/config b/tools/testing/selftests/pci_endpoint/config new file mode 100644 index 000000000000..7cdcf117db8d --- /dev/null +++ b/tools/testing/selftests/pci_endpoint/config @@ -0,0 +1,4 @@ +CONFIG_PCI_ENDPOINT=y +CONFIG_PCI_ENDPOINT_CONFIGFS=y +CONFIG_PCI_EPF_TEST=m +CONFIG_PCI_ENDPOINT_TEST=m diff --git a/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c new file mode 100644 index 000000000000..c267b822c108 --- /dev/null +++ b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Kselftest for PCI Endpoint Subsystem + * + * Copyright (c) 2022 Samsung Electronics Co., Ltd. + * https://www.samsung.com + * Author: Aman Gupta <aman1.gupta@samsung.com> + * + * Copyright (c) 2024, Linaro Ltd. + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +#include <errno.h> +#include <fcntl.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <sys/ioctl.h> +#include <unistd.h> + +#include "../../../../include/uapi/linux/pcitest.h" + +#include "../kselftest_harness.h" + +#define pci_ep_ioctl(cmd, arg) \ +({ \ + ret = ioctl(self->fd, cmd, arg); \ + ret = ret < 0 ? -errno : 0; \ +}) + +static const char *test_device = "/dev/pci-endpoint-test.0"; +static const unsigned long test_size[5] = { 1, 1024, 1025, 1024000, 1024001 }; + +FIXTURE(pci_ep_bar) +{ + int fd; +}; + +FIXTURE_SETUP(pci_ep_bar) +{ + self->fd = open(test_device, O_RDWR); + + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); +} + +FIXTURE_TEARDOWN(pci_ep_bar) +{ + close(self->fd); +} + +FIXTURE_VARIANT(pci_ep_bar) +{ + int barno; +}; + +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR0) { .barno = 0 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR1) { .barno = 1 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR2) { .barno = 2 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR3) { .barno = 3 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR4) { .barno = 4 }; +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR5) { .barno = 5 }; + +TEST_F(pci_ep_bar, BAR_TEST) +{ + int ret; + + pci_ep_ioctl(PCITEST_BAR, variant->barno); + EXPECT_FALSE(ret) TH_LOG("Test failed for BAR%d", variant->barno); +} + +FIXTURE(pci_ep_basic) +{ + int fd; +}; + +FIXTURE_SETUP(pci_ep_basic) +{ + self->fd = open(test_device, O_RDWR); + + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); +} + +FIXTURE_TEARDOWN(pci_ep_basic) +{ + close(self->fd); +} + +TEST_F(pci_ep_basic, CONSECUTIVE_BAR_TEST) +{ + int ret; + + pci_ep_ioctl(PCITEST_BARS, 0); + EXPECT_FALSE(ret) TH_LOG("Consecutive BAR test failed"); +} + +TEST_F(pci_ep_basic, LEGACY_IRQ_TEST) +{ + int ret; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 0); + ASSERT_EQ(0, ret) TH_LOG("Can't set Legacy IRQ type"); + + pci_ep_ioctl(PCITEST_LEGACY_IRQ, 0); + EXPECT_FALSE(ret) TH_LOG("Test failed for Legacy IRQ"); +} + +TEST_F(pci_ep_basic, MSI_TEST) +{ + int ret, i; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); + + for (i = 1; i <= 32; i++) { + pci_ep_ioctl(PCITEST_MSI, i); + EXPECT_FALSE(ret) TH_LOG("Test failed for MSI%d", i); + } +} + +TEST_F(pci_ep_basic, MSIX_TEST) +{ + int ret, i; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 2); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI-X IRQ type"); + + for (i = 1; i <= 2048; i++) { + pci_ep_ioctl(PCITEST_MSIX, i); + EXPECT_FALSE(ret) TH_LOG("Test failed for MSI-X%d", i); + } +} + +FIXTURE(pci_ep_data_transfer) +{ + int fd; +}; + +FIXTURE_SETUP(pci_ep_data_transfer) +{ + self->fd = open(test_device, O_RDWR); + + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); +} + +FIXTURE_TEARDOWN(pci_ep_data_transfer) +{ + close(self->fd); +} + +FIXTURE_VARIANT(pci_ep_data_transfer) +{ + bool use_dma; +}; + +FIXTURE_VARIANT_ADD(pci_ep_data_transfer, memcpy) +{ + .use_dma = false, +}; + +FIXTURE_VARIANT_ADD(pci_ep_data_transfer, dma) +{ + .use_dma = true, +}; + +TEST_F(pci_ep_data_transfer, READ_TEST) +{ + struct pci_endpoint_test_xfer_param param = {}; + int ret, i; + + if (variant->use_dma) + param.flags = PCITEST_FLAGS_USE_DMA; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); + + for (i = 0; i < ARRAY_SIZE(test_size); i++) { + param.size = test_size[i]; + pci_ep_ioctl(PCITEST_READ, ¶m); + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", + test_size[i]); + } +} + +TEST_F(pci_ep_data_transfer, WRITE_TEST) +{ + struct pci_endpoint_test_xfer_param param = {}; + int ret, i; + + if (variant->use_dma) + param.flags = PCITEST_FLAGS_USE_DMA; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); + + for (i = 0; i < ARRAY_SIZE(test_size); i++) { + param.size = test_size[i]; + pci_ep_ioctl(PCITEST_WRITE, ¶m); + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", + test_size[i]); + } +} + +TEST_F(pci_ep_data_transfer, COPY_TEST) +{ + struct pci_endpoint_test_xfer_param param = {}; + int ret, i; + + if (variant->use_dma) + param.flags = PCITEST_FLAGS_USE_DMA; + + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); + + for (i = 0; i < ARRAY_SIZE(test_size); i++) { + param.size = test_size[i]; + pci_ep_ioctl(PCITEST_COPY, ¶m); + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", + test_size[i]); + } +} +TEST_HARNESS_MAIN diff --git a/tools/testing/selftests/pci_endpoint/pcitest.c b/tools/testing/selftests/pci_endpoint/pcitest.c deleted file mode 100644 index b96cc118839b..000000000000 --- a/tools/testing/selftests/pci_endpoint/pcitest.c +++ /dev/null @@ -1,265 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/** - * Userspace PCI Endpoint Test Module - * - * Copyright (C) 2017 Texas Instruments - * Author: Kishon Vijay Abraham I <kishon@ti.com> - */ - -#include <errno.h> -#include <fcntl.h> -#include <stdbool.h> -#include <stdio.h> -#include <stdlib.h> -#include <sys/ioctl.h> -#include <unistd.h> - -#include <linux/pcitest.h> - -static char *irq[] = { "LEGACY", "MSI", "MSI-X" }; - -struct pci_test { - char *device; - char barnum; - bool consecutive_bar_test; - bool legacyirq; - unsigned int msinum; - unsigned int msixnum; - int irqtype; - bool set_irqtype; - bool get_irqtype; - bool clear_irq; - bool read; - bool write; - bool copy; - unsigned long size; - bool use_dma; -}; - -static int run_test(struct pci_test *test) -{ - struct pci_endpoint_test_xfer_param param = {}; - int ret = -EINVAL; - int fd; - - fd = open(test->device, O_RDWR); - if (fd < 0) { - perror("can't open PCI Endpoint Test device"); - return -ENODEV; - } - - if (test->barnum >= 0 && test->barnum <= 5) { - ret = ioctl(fd, PCITEST_BAR, test->barnum); - fprintf(stdout, "BAR%d:\t\t", test->barnum); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->consecutive_bar_test) { - ret = ioctl(fd, PCITEST_BARS); - fprintf(stdout, "Consecutive BAR test:\t\t"); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->set_irqtype) { - ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype); - fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->get_irqtype) { - ret = ioctl(fd, PCITEST_GET_IRQTYPE); - fprintf(stdout, "GET IRQ TYPE:\t\t"); - if (ret < 0) { - fprintf(stdout, "NOT OKAY\n"); - } else { - fprintf(stdout, "%s\n", irq[ret]); - ret = 0; - } - } - - if (test->clear_irq) { - ret = ioctl(fd, PCITEST_CLEAR_IRQ); - fprintf(stdout, "CLEAR IRQ:\t\t"); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->legacyirq) { - ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0); - fprintf(stdout, "LEGACY IRQ:\t"); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->msinum > 0 && test->msinum <= 32) { - ret = ioctl(fd, PCITEST_MSI, test->msinum); - fprintf(stdout, "MSI%u:\t\t", test->msinum); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->msixnum > 0 && test->msixnum <= 2048) { - ret = ioctl(fd, PCITEST_MSIX, test->msixnum); - fprintf(stdout, "MSI-X%u:\t\t", test->msixnum); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->write) { - param.size = test->size; - if (test->use_dma) - param.flags = PCITEST_FLAGS_USE_DMA; - ret = ioctl(fd, PCITEST_WRITE, ¶m); - fprintf(stdout, "WRITE (%7lu bytes):\t\t", test->size); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->read) { - param.size = test->size; - if (test->use_dma) - param.flags = PCITEST_FLAGS_USE_DMA; - ret = ioctl(fd, PCITEST_READ, ¶m); - fprintf(stdout, "READ (%7lu bytes):\t\t", test->size); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - if (test->copy) { - param.size = test->size; - if (test->use_dma) - param.flags = PCITEST_FLAGS_USE_DMA; - ret = ioctl(fd, PCITEST_COPY, ¶m); - fprintf(stdout, "COPY (%7lu bytes):\t\t", test->size); - if (ret < 0) - fprintf(stdout, "NOT OKAY\n"); - else - fprintf(stdout, "OKAY\n"); - } - - fflush(stdout); - close(fd); - return ret; -} - -int main(int argc, char **argv) -{ - int c; - struct pci_test *test; - - test = calloc(1, sizeof(*test)); - if (!test) { - perror("Fail to allocate memory for pci_test\n"); - return -ENOMEM; - } - - /* since '0' is a valid BAR number, initialize it to -1 */ - test->barnum = -1; - - /* set default size as 100KB */ - test->size = 0x19000; - - /* set default endpoint device */ - test->device = "/dev/pci-endpoint-test.0"; - - while ((c = getopt(argc, argv, "D:b:Cm:x:i:deIlhrwcs:")) != EOF) - switch (c) { - case 'D': - test->device = optarg; - continue; - case 'b': - test->barnum = atoi(optarg); - if (test->barnum < 0 || test->barnum > 5) - goto usage; - continue; - case 'C': - test->consecutive_bar_test = true; - continue; - case 'l': - test->legacyirq = true; - continue; - case 'm': - test->msinum = atoi(optarg); - if (test->msinum < 1 || test->msinum > 32) - goto usage; - continue; - case 'x': - test->msixnum = atoi(optarg); - if (test->msixnum < 1 || test->msixnum > 2048) - goto usage; - continue; - case 'i': - test->irqtype = atoi(optarg); - if (test->irqtype < 0 || test->irqtype > 2) - goto usage; - test->set_irqtype = true; - continue; - case 'I': - test->get_irqtype = true; - continue; - case 'r': - test->read = true; - continue; - case 'w': - test->write = true; - continue; - case 'c': - test->copy = true; - continue; - case 'e': - test->clear_irq = true; - continue; - case 's': - test->size = strtoul(optarg, NULL, 0); - continue; - case 'd': - test->use_dma = true; - continue; - case 'h': - default: -usage: - fprintf(stderr, - "usage: %s [options]\n" - "Options:\n" - "\t-D <dev> PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n" - "\t-b <bar num> BAR test (bar number between 0..5)\n" - "\t-C Consecutive BAR test\n" - "\t-m <msi num> MSI test (msi number between 1..32)\n" - "\t-x <msix num> \tMSI-X test (msix number between 1..2048)\n" - "\t-i <irq type> \tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n" - "\t-e Clear IRQ\n" - "\t-I Get current IRQ type configured\n" - "\t-d Use DMA\n" - "\t-l Legacy IRQ test\n" - "\t-r Read buffer test\n" - "\t-w Write buffer test\n" - "\t-c Copy buffer test\n" - "\t-s <size> Size of buffer {default: 100KB}\n" - "\t-h Print this help message\n", - argv[0]); - return -EINVAL; - } - - return run_test(test); -} diff --git a/tools/testing/selftests/pci_endpoint/pcitest.sh b/tools/testing/selftests/pci_endpoint/pcitest.sh deleted file mode 100644 index 770f4d6df34b..000000000000 --- a/tools/testing/selftests/pci_endpoint/pcitest.sh +++ /dev/null @@ -1,73 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 - -echo "BAR tests" -echo - -bar=0 - -while [ $bar -lt 6 ] -do - pcitest -b $bar - bar=`expr $bar + 1` -done -pcitest -C -echo - -echo "Interrupt tests" -echo - -pcitest -i 0 -pcitest -l - -pcitest -i 1 -msi=1 - -while [ $msi -lt 33 ] -do - pcitest -m $msi - msi=`expr $msi + 1` -done -echo - -pcitest -i 2 -msix=1 - -while [ $msix -lt 2049 ] -do - pcitest -x $msix - msix=`expr $msix + 1` -done -echo - -echo "Read Tests" -echo - -pcitest -i 1 - -pcitest -r -s 1 -pcitest -r -s 1024 -pcitest -r -s 1025 -pcitest -r -s 1024000 -pcitest -r -s 1024001 -echo - -echo "Write Tests" -echo - -pcitest -w -s 1 -pcitest -w -s 1024 -pcitest -w -s 1025 -pcitest -w -s 1024000 -pcitest -w -s 1024001 -echo - -echo "Copy Tests" -echo - -pcitest -c -s 1 -pcitest -c -s 1024 -pcitest -c -s 1025 -pcitest -c -s 1024000 -pcitest -c -s 1024001 -echo -- 2.25.1 ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v5 4/4] selftests: pci_endpoint: Migrate to Kselftest framework 2025-01-16 13:51 ` [PATCH v5 4/4] selftests: pci_endpoint: Migrate to Kselftest framework Manivannan Sadhasivam @ 2025-01-16 15:39 ` Niklas Cassel 0 siblings, 0 replies; 12+ messages in thread From: Niklas Cassel @ 2025-01-16 15:39 UTC (permalink / raw) To: Manivannan Sadhasivam Cc: kw, gregkh, arnd, lpieralisi, shuah, kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest, Aman Gupta, Padmanabhan Rajanbabu On Thu, Jan 16, 2025 at 07:21:06PM +0530, Manivannan Sadhasivam wrote: > Migrate the PCI endpoint test to Kselftest framework. All the tests that > were part of the previous pcitest.sh file were migrated. > > Below is the exclusive list of tests: > > 1. BAR0 Test > 2. BAR1 Test > 3. BAR2 Test > 4. BAR3 Test > 5. BAR4 Test > 6. BAR5 Test > 7. Consecutive BAR Tests > 8. Legacy IRQ Tests > 9. MSI Interrupt Tests (MSI1 to MSI32) > 10. MSI-X Interrupt Tests (MSI-X1 to MSI-X2048) > 11. Read Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) > 12. Write Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) > 13. Copy Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes) > 14. Read Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes) > 15. Write Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes) > 16. Copy Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes) > > BAR, DMA and MEMCPY tests are added as fixture variants and can be executed > separately as below: > > $ pci_endpoint_test -v BAR0 > $ pci_endpoint_test -v dma > $ pci_endpoint_test -v memcpy > > Co-developed-by: Aman Gupta <aman1.gupta@samsung.com> > Signed-off-by: Aman Gupta <aman1.gupta@samsung.com> > Co-developed-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com> > [mani: reworked based on the IOCTL fix, cleanups, documentation, commit message] > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > Documentation/PCI/endpoint/pci-test-howto.rst | 169 +++++------ > tools/testing/selftests/Makefile | 1 + > .../testing/selftests/pci_endpoint/.gitignore | 3 +- > tools/testing/selftests/pci_endpoint/Build | 1 - > tools/testing/selftests/pci_endpoint/Makefile | 59 +--- > tools/testing/selftests/pci_endpoint/config | 4 + > .../pci_endpoint/pci_endpoint_test.c | 221 +++++++++++++++ > .../testing/selftests/pci_endpoint/pcitest.c | 265 ------------------ > .../testing/selftests/pci_endpoint/pcitest.sh | 73 ----- > 9 files changed, 300 insertions(+), 496 deletions(-) > delete mode 100644 tools/testing/selftests/pci_endpoint/Build > create mode 100644 tools/testing/selftests/pci_endpoint/config > create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c > delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.c > delete mode 100644 tools/testing/selftests/pci_endpoint/pcitest.sh > > diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst > index c4ae7af50ede..7d0dbad61456 100644 > --- a/Documentation/PCI/endpoint/pci-test-howto.rst > +++ b/Documentation/PCI/endpoint/pci-test-howto.rst > @@ -123,9 +123,9 @@ above:: > Using Endpoint Test function Device > ----------------------------------- > > -pcitest.sh added in tools/testing/selftests/pci_endpoint can be used to run all > -the default PCI endpoint tests. To compile this tool the following commands > -should be used:: > +Kselftest added in tools/testing/selftests/pci_endpoint can be used to run all > +the default PCI endpoint tests. To build the Kselftest for PCI endpoint > +subsystem, the following commands should be used:: > > # cd <kernel-dir> > # make -C tools/testing/selftests/pci_endpoint > @@ -133,104 +133,73 @@ should be used:: > or if you desire to compile and install in your system:: > > # cd <kernel-dir> > - # make -C tools/testing/selftests/pci_endpoint install > + # make -C tools/testing/selftests/pci_endpoint INSTALL_PATH=/usr/bin install > > -The tool and script will be located in <rootfs>/usr/bin/ > +The test will be located in <rootfs>/usr/bin/ > > - > -pcitest.sh Output > -~~~~~~~~~~~~~~~~~ > +Kselftest Output > +~~~~~~~~~~~~~~~~ > :: > > - # pcitest.sh > - BAR tests > - > - BAR0: OKAY > - BAR1: OKAY > - BAR2: OKAY > - BAR3: OKAY > - BAR4: NOT OKAY > - BAR5: NOT OKAY > - > - Interrupt tests > - > - SET IRQ TYPE TO LEGACY: OKAY > - LEGACY IRQ: NOT OKAY > - SET IRQ TYPE TO MSI: OKAY > - MSI1: OKAY > - MSI2: OKAY > - MSI3: OKAY > - MSI4: OKAY > - MSI5: OKAY > - MSI6: OKAY > - MSI7: OKAY > - MSI8: OKAY > - MSI9: OKAY > - MSI10: OKAY > - MSI11: OKAY > - MSI12: OKAY > - MSI13: OKAY > - MSI14: OKAY > - MSI15: OKAY > - MSI16: OKAY > - MSI17: NOT OKAY > - MSI18: NOT OKAY > - MSI19: NOT OKAY > - MSI20: NOT OKAY > - MSI21: NOT OKAY > - MSI22: NOT OKAY > - MSI23: NOT OKAY > - MSI24: NOT OKAY > - MSI25: NOT OKAY > - MSI26: NOT OKAY > - MSI27: NOT OKAY > - MSI28: NOT OKAY > - MSI29: NOT OKAY > - MSI30: NOT OKAY > - MSI31: NOT OKAY > - MSI32: NOT OKAY > - SET IRQ TYPE TO MSI-X: OKAY > - MSI-X1: OKAY > - MSI-X2: OKAY > - MSI-X3: OKAY > - MSI-X4: OKAY > - MSI-X5: OKAY > - MSI-X6: OKAY > - MSI-X7: OKAY > - MSI-X8: OKAY > - MSI-X9: NOT OKAY > - MSI-X10: NOT OKAY > - MSI-X11: NOT OKAY > - MSI-X12: NOT OKAY > - MSI-X13: NOT OKAY > - MSI-X14: NOT OKAY > - MSI-X15: NOT OKAY > - MSI-X16: NOT OKAY > - [...] > - MSI-X2047: NOT OKAY > - MSI-X2048: NOT OKAY > - > - Read Tests > - > - SET IRQ TYPE TO MSI: OKAY > - READ ( 1 bytes): OKAY > - READ ( 1024 bytes): OKAY > - READ ( 1025 bytes): OKAY > - READ (1024000 bytes): OKAY > - READ (1024001 bytes): OKAY > - > - Write Tests > - > - WRITE ( 1 bytes): OKAY > - WRITE ( 1024 bytes): OKAY > - WRITE ( 1025 bytes): OKAY > - WRITE (1024000 bytes): OKAY > - WRITE (1024001 bytes): OKAY > - > - Copy Tests > - > - COPY ( 1 bytes): OKAY > - COPY ( 1024 bytes): OKAY > - COPY ( 1025 bytes): OKAY > - COPY (1024000 bytes): OKAY > - COPY (1024001 bytes): OKAY > + # pci_endpoint_test > + TAP version 13 > + 1..16 > + # Starting 16 tests from 9 test cases. > + # RUN pci_ep_bar.BAR0.BAR_TEST ... > + # OK pci_ep_bar.BAR0.BAR_TEST > + ok 1 pci_ep_bar.BAR0.BAR_TEST > + # RUN pci_ep_bar.BAR1.BAR_TEST ... > + # OK pci_ep_bar.BAR1.BAR_TEST > + ok 2 pci_ep_bar.BAR1.BAR_TEST > + # RUN pci_ep_bar.BAR2.BAR_TEST ... > + # OK pci_ep_bar.BAR2.BAR_TEST > + ok 3 pci_ep_bar.BAR2.BAR_TEST > + # RUN pci_ep_bar.BAR3.BAR_TEST ... > + # OK pci_ep_bar.BAR3.BAR_TEST > + ok 4 pci_ep_bar.BAR3.BAR_TEST > + # RUN pci_ep_bar.BAR4.BAR_TEST ... > + # OK pci_ep_bar.BAR4.BAR_TEST > + ok 5 pci_ep_bar.BAR4.BAR_TEST > + # RUN pci_ep_bar.BAR5.BAR_TEST ... > + # OK pci_ep_bar.BAR5.BAR_TEST > + ok 6 pci_ep_bar.BAR5.BAR_TEST > + # RUN pci_ep_basic.CONSECUTIVE_BAR_TEST ... > + # OK pci_ep_basic.CONSECUTIVE_BAR_TEST > + ok 7 pci_ep_basic.CONSECUTIVE_BAR_TEST > + # RUN pci_ep_basic.LEGACY_IRQ_TEST ... > + # OK pci_ep_basic.LEGACY_IRQ_TEST > + ok 8 pci_ep_basic.LEGACY_IRQ_TEST > + # RUN pci_ep_basic.MSI_TEST ... > + # OK pci_ep_basic.MSI_TEST > + ok 9 pci_ep_basic.MSI_TEST > + # RUN pci_ep_basic.MSIX_TEST ... > + # OK pci_ep_basic.MSIX_TEST > + ok 10 pci_ep_basic.MSIX_TEST > + # RUN pci_ep_data_transfer.memcpy.READ_TEST ... > + # OK pci_ep_data_transfer.memcpy.READ_TEST > + ok 11 pci_ep_data_transfer.memcpy.READ_TEST > + # RUN pci_ep_data_transfer.memcpy.WRITE_TEST ... > + # OK pci_ep_data_transfer.memcpy.WRITE_TEST > + ok 12 pci_ep_data_transfer.memcpy.WRITE_TEST > + # RUN pci_ep_data_transfer.memcpy.COPY_TEST ... > + # OK pci_ep_data_transfer.memcpy.COPY_TEST > + ok 13 pci_ep_data_transfer.memcpy.COPY_TEST > + # RUN pci_ep_data_transfer.dma.READ_TEST ... > + # OK pci_ep_data_transfer.dma.READ_TEST > + ok 14 pci_ep_data_transfer.dma.READ_TEST > + # RUN pci_ep_data_transfer.dma.WRITE_TEST ... > + # OK pci_ep_data_transfer.dma.WRITE_TEST > + ok 15 pci_ep_data_transfer.dma.WRITE_TEST > + # RUN pci_ep_data_transfer.dma.COPY_TEST ... > + # OK pci_ep_data_transfer.dma.COPY_TEST > + ok 16 pci_ep_data_transfer.dma.COPY_TEST > + # PASSED: 16 / 16 tests passed. > + # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:0 error:0 > + > + > +Testcase 16 (pci_ep_data_transfer.dma.COPY_TEST) will fail for most of the DMA > +capable endpoint controllers due to the absence of the MEMCPY over DMA. For such > +controllers, it is advisable to skip the forementioned testcase using below > +command:: > + > + # pci_endpoint_test -f pci_ep_bar -f pci_ep_basic -v memcpy -T COPY_TEST -v dma > diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile > index 2401e973c359..50931cd6aff2 100644 > --- a/tools/testing/selftests/Makefile > +++ b/tools/testing/selftests/Makefile > @@ -72,6 +72,7 @@ TARGETS += net/packetdrill > TARGETS += net/rds > TARGETS += net/tcp_ao > TARGETS += nsfs > +TARGETS += pci_endpoint > TARGETS += pcie_bwctrl > TARGETS += perf_events > TARGETS += pidfd > diff --git a/tools/testing/selftests/pci_endpoint/.gitignore b/tools/testing/selftests/pci_endpoint/.gitignore > index 29ab47c48484..6a4837a3e034 100644 > --- a/tools/testing/selftests/pci_endpoint/.gitignore > +++ b/tools/testing/selftests/pci_endpoint/.gitignore > @@ -1,3 +1,2 @@ > # SPDX-License-Identifier: GPL-2.0-only > -*.o > -pcitest > +pci_endpoint_test > diff --git a/tools/testing/selftests/pci_endpoint/Build b/tools/testing/selftests/pci_endpoint/Build > deleted file mode 100644 > index c375aea21790..000000000000 > --- a/tools/testing/selftests/pci_endpoint/Build > +++ /dev/null > @@ -1 +0,0 @@ > -pcitest-y += pcitest.o > diff --git a/tools/testing/selftests/pci_endpoint/Makefile b/tools/testing/selftests/pci_endpoint/Makefile > index 3c6fe18e32cc..bf21ebf20b4a 100644 > --- a/tools/testing/selftests/pci_endpoint/Makefile > +++ b/tools/testing/selftests/pci_endpoint/Makefile > @@ -1,58 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0 > -include ../../../scripts/Makefile.include > +CFLAGS += -O2 -Wl,-no-as-needed -Wall $(KHDR_INCLUDES) > +LDFLAGS += -lrt -lpthread -lm > > -bindir ?= /usr/bin > +TEST_GEN_PROGS = pci_endpoint_test > > -ifeq ($(srctree),) > -srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) > -endif > - > -# Do not use make's built-in rules > -# (this improves performance and avoids hard-to-debug behaviour); > -MAKEFLAGS += -r > - > -CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include > - > -ALL_TARGETS := pcitest > -ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS)) > - > -SCRIPTS := pcitest.sh > - > -all: $(ALL_PROGRAMS) > - > -export srctree OUTPUT CC LD CFLAGS > -include $(srctree)/tools/build/Makefile.include > - > -# > -# We need the following to be outside of kernel tree > -# > -$(OUTPUT)include/linux/: ../../../../include/uapi/linux/ > - mkdir -p $(OUTPUT)include/linux/ 2>&1 || true > - ln -sf $(CURDIR)/../../../../include/uapi/linux/pcitest.h $@ > - > -$(info ${CURDIR}) > -prepare: $(OUTPUT)include/linux/ > - > -PCITEST_IN := $(OUTPUT)pcitest-in.o > -$(PCITEST_IN): prepare FORCE > - $(Q)$(MAKE) $(build)=pcitest > -$(OUTPUT)pcitest: $(PCITEST_IN) > - $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@ > - > -clean: > - rm -f $(ALL_PROGRAMS) > - rm -rf $(OUTPUT)include/ > - find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete > - > -install: $(ALL_PROGRAMS) > - install -d -m 755 $(DESTDIR)$(bindir); \ > - for program in $(ALL_PROGRAMS); do \ > - install $$program $(DESTDIR)$(bindir); \ > - done; \ > - for script in $(SCRIPTS); do \ > - install $$script $(DESTDIR)$(bindir); \ > - done > - > -FORCE: > - > -.PHONY: all install clean FORCE prepare > +include ../lib.mk > diff --git a/tools/testing/selftests/pci_endpoint/config b/tools/testing/selftests/pci_endpoint/config > new file mode 100644 > index 000000000000..7cdcf117db8d > --- /dev/null > +++ b/tools/testing/selftests/pci_endpoint/config > @@ -0,0 +1,4 @@ > +CONFIG_PCI_ENDPOINT=y > +CONFIG_PCI_ENDPOINT_CONFIGFS=y > +CONFIG_PCI_EPF_TEST=m > +CONFIG_PCI_ENDPOINT_TEST=m > diff --git a/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c > new file mode 100644 > index 000000000000..c267b822c108 > --- /dev/null > +++ b/tools/testing/selftests/pci_endpoint/pci_endpoint_test.c > @@ -0,0 +1,221 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Kselftest for PCI Endpoint Subsystem > + * > + * Copyright (c) 2022 Samsung Electronics Co., Ltd. > + * https://www.samsung.com > + * Author: Aman Gupta <aman1.gupta@samsung.com> > + * > + * Copyright (c) 2024, Linaro Ltd. > + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > + */ > + > +#include <errno.h> > +#include <fcntl.h> > +#include <stdbool.h> > +#include <stdio.h> > +#include <stdlib.h> > +#include <sys/ioctl.h> > +#include <unistd.h> > + > +#include "../../../../include/uapi/linux/pcitest.h" > + > +#include "../kselftest_harness.h" > + > +#define pci_ep_ioctl(cmd, arg) \ > +({ \ > + ret = ioctl(self->fd, cmd, arg); \ > + ret = ret < 0 ? -errno : 0; \ > +}) > + > +static const char *test_device = "/dev/pci-endpoint-test.0"; > +static const unsigned long test_size[5] = { 1, 1024, 1025, 1024000, 1024001 }; > + > +FIXTURE(pci_ep_bar) > +{ > + int fd; > +}; > + > +FIXTURE_SETUP(pci_ep_bar) > +{ > + self->fd = open(test_device, O_RDWR); > + > + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); > +} > + > +FIXTURE_TEARDOWN(pci_ep_bar) > +{ > + close(self->fd); > +} > + > +FIXTURE_VARIANT(pci_ep_bar) > +{ > + int barno; > +}; > + > +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR0) { .barno = 0 }; > +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR1) { .barno = 1 }; > +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR2) { .barno = 2 }; > +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR3) { .barno = 3 }; > +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR4) { .barno = 4 }; > +FIXTURE_VARIANT_ADD(pci_ep_bar, BAR5) { .barno = 5 }; > + > +TEST_F(pci_ep_bar, BAR_TEST) > +{ > + int ret; > + > + pci_ep_ioctl(PCITEST_BAR, variant->barno); > + EXPECT_FALSE(ret) TH_LOG("Test failed for BAR%d", variant->barno); > +} > + > +FIXTURE(pci_ep_basic) > +{ > + int fd; > +}; > + > +FIXTURE_SETUP(pci_ep_basic) > +{ > + self->fd = open(test_device, O_RDWR); > + > + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); > +} > + > +FIXTURE_TEARDOWN(pci_ep_basic) > +{ > + close(self->fd); > +} > + > +TEST_F(pci_ep_basic, CONSECUTIVE_BAR_TEST) > +{ > + int ret; > + > + pci_ep_ioctl(PCITEST_BARS, 0); > + EXPECT_FALSE(ret) TH_LOG("Consecutive BAR test failed"); > +} > + > +TEST_F(pci_ep_basic, LEGACY_IRQ_TEST) > +{ > + int ret; > + > + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 0); > + ASSERT_EQ(0, ret) TH_LOG("Can't set Legacy IRQ type"); > + > + pci_ep_ioctl(PCITEST_LEGACY_IRQ, 0); > + EXPECT_FALSE(ret) TH_LOG("Test failed for Legacy IRQ"); > +} > + > +TEST_F(pci_ep_basic, MSI_TEST) > +{ > + int ret, i; > + > + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); > + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); > + > + for (i = 1; i <= 32; i++) { > + pci_ep_ioctl(PCITEST_MSI, i); > + EXPECT_FALSE(ret) TH_LOG("Test failed for MSI%d", i); > + } > +} > + > +TEST_F(pci_ep_basic, MSIX_TEST) > +{ > + int ret, i; > + > + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 2); > + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI-X IRQ type"); > + > + for (i = 1; i <= 2048; i++) { > + pci_ep_ioctl(PCITEST_MSIX, i); > + EXPECT_FALSE(ret) TH_LOG("Test failed for MSI-X%d", i); > + } > +} > + > +FIXTURE(pci_ep_data_transfer) > +{ > + int fd; > +}; > + > +FIXTURE_SETUP(pci_ep_data_transfer) > +{ > + self->fd = open(test_device, O_RDWR); > + > + ASSERT_NE(-1, self->fd) TH_LOG("Can't open PCI Endpoint Test device"); > +} > + > +FIXTURE_TEARDOWN(pci_ep_data_transfer) > +{ > + close(self->fd); > +} > + > +FIXTURE_VARIANT(pci_ep_data_transfer) > +{ > + bool use_dma; > +}; > + > +FIXTURE_VARIANT_ADD(pci_ep_data_transfer, memcpy) > +{ > + .use_dma = false, > +}; > + > +FIXTURE_VARIANT_ADD(pci_ep_data_transfer, dma) > +{ > + .use_dma = true, > +}; > + > +TEST_F(pci_ep_data_transfer, READ_TEST) > +{ > + struct pci_endpoint_test_xfer_param param = {}; > + int ret, i; > + > + if (variant->use_dma) > + param.flags = PCITEST_FLAGS_USE_DMA; > + > + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); > + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); > + > + for (i = 0; i < ARRAY_SIZE(test_size); i++) { > + param.size = test_size[i]; > + pci_ep_ioctl(PCITEST_READ, ¶m); > + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", > + test_size[i]); > + } > +} > + > +TEST_F(pci_ep_data_transfer, WRITE_TEST) > +{ > + struct pci_endpoint_test_xfer_param param = {}; > + int ret, i; > + > + if (variant->use_dma) > + param.flags = PCITEST_FLAGS_USE_DMA; > + > + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); > + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); > + > + for (i = 0; i < ARRAY_SIZE(test_size); i++) { > + param.size = test_size[i]; > + pci_ep_ioctl(PCITEST_WRITE, ¶m); > + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", > + test_size[i]); > + } > +} > + > +TEST_F(pci_ep_data_transfer, COPY_TEST) > +{ > + struct pci_endpoint_test_xfer_param param = {}; > + int ret, i; > + > + if (variant->use_dma) > + param.flags = PCITEST_FLAGS_USE_DMA; > + > + pci_ep_ioctl(PCITEST_SET_IRQTYPE, 1); > + ASSERT_EQ(0, ret) TH_LOG("Can't set MSI IRQ type"); > + > + for (i = 0; i < ARRAY_SIZE(test_size); i++) { > + param.size = test_size[i]; > + pci_ep_ioctl(PCITEST_COPY, ¶m); > + EXPECT_FALSE(ret) TH_LOG("Test failed for size (%ld)", > + test_size[i]); > + } > +} > +TEST_HARNESS_MAIN > diff --git a/tools/testing/selftests/pci_endpoint/pcitest.c b/tools/testing/selftests/pci_endpoint/pcitest.c > deleted file mode 100644 > index b96cc118839b..000000000000 > --- a/tools/testing/selftests/pci_endpoint/pcitest.c > +++ /dev/null > @@ -1,265 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0-only > -/** > - * Userspace PCI Endpoint Test Module > - * > - * Copyright (C) 2017 Texas Instruments > - * Author: Kishon Vijay Abraham I <kishon@ti.com> > - */ > - > -#include <errno.h> > -#include <fcntl.h> > -#include <stdbool.h> > -#include <stdio.h> > -#include <stdlib.h> > -#include <sys/ioctl.h> > -#include <unistd.h> > - > -#include <linux/pcitest.h> > - > -static char *irq[] = { "LEGACY", "MSI", "MSI-X" }; > - > -struct pci_test { > - char *device; > - char barnum; > - bool consecutive_bar_test; > - bool legacyirq; > - unsigned int msinum; > - unsigned int msixnum; > - int irqtype; > - bool set_irqtype; > - bool get_irqtype; > - bool clear_irq; > - bool read; > - bool write; > - bool copy; > - unsigned long size; > - bool use_dma; > -}; > - > -static int run_test(struct pci_test *test) > -{ > - struct pci_endpoint_test_xfer_param param = {}; > - int ret = -EINVAL; > - int fd; > - > - fd = open(test->device, O_RDWR); > - if (fd < 0) { > - perror("can't open PCI Endpoint Test device"); > - return -ENODEV; > - } > - > - if (test->barnum >= 0 && test->barnum <= 5) { > - ret = ioctl(fd, PCITEST_BAR, test->barnum); > - fprintf(stdout, "BAR%d:\t\t", test->barnum); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->consecutive_bar_test) { > - ret = ioctl(fd, PCITEST_BARS); > - fprintf(stdout, "Consecutive BAR test:\t\t"); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->set_irqtype) { > - ret = ioctl(fd, PCITEST_SET_IRQTYPE, test->irqtype); > - fprintf(stdout, "SET IRQ TYPE TO %s:\t\t", irq[test->irqtype]); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->get_irqtype) { > - ret = ioctl(fd, PCITEST_GET_IRQTYPE); > - fprintf(stdout, "GET IRQ TYPE:\t\t"); > - if (ret < 0) { > - fprintf(stdout, "NOT OKAY\n"); > - } else { > - fprintf(stdout, "%s\n", irq[ret]); > - ret = 0; > - } > - } > - > - if (test->clear_irq) { > - ret = ioctl(fd, PCITEST_CLEAR_IRQ); > - fprintf(stdout, "CLEAR IRQ:\t\t"); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->legacyirq) { > - ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0); > - fprintf(stdout, "LEGACY IRQ:\t"); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->msinum > 0 && test->msinum <= 32) { > - ret = ioctl(fd, PCITEST_MSI, test->msinum); > - fprintf(stdout, "MSI%u:\t\t", test->msinum); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->msixnum > 0 && test->msixnum <= 2048) { > - ret = ioctl(fd, PCITEST_MSIX, test->msixnum); > - fprintf(stdout, "MSI-X%u:\t\t", test->msixnum); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->write) { > - param.size = test->size; > - if (test->use_dma) > - param.flags = PCITEST_FLAGS_USE_DMA; > - ret = ioctl(fd, PCITEST_WRITE, ¶m); > - fprintf(stdout, "WRITE (%7lu bytes):\t\t", test->size); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->read) { > - param.size = test->size; > - if (test->use_dma) > - param.flags = PCITEST_FLAGS_USE_DMA; > - ret = ioctl(fd, PCITEST_READ, ¶m); > - fprintf(stdout, "READ (%7lu bytes):\t\t", test->size); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - if (test->copy) { > - param.size = test->size; > - if (test->use_dma) > - param.flags = PCITEST_FLAGS_USE_DMA; > - ret = ioctl(fd, PCITEST_COPY, ¶m); > - fprintf(stdout, "COPY (%7lu bytes):\t\t", test->size); > - if (ret < 0) > - fprintf(stdout, "NOT OKAY\n"); > - else > - fprintf(stdout, "OKAY\n"); > - } > - > - fflush(stdout); > - close(fd); > - return ret; > -} > - > -int main(int argc, char **argv) > -{ > - int c; > - struct pci_test *test; > - > - test = calloc(1, sizeof(*test)); > - if (!test) { > - perror("Fail to allocate memory for pci_test\n"); > - return -ENOMEM; > - } > - > - /* since '0' is a valid BAR number, initialize it to -1 */ > - test->barnum = -1; > - > - /* set default size as 100KB */ > - test->size = 0x19000; > - > - /* set default endpoint device */ > - test->device = "/dev/pci-endpoint-test.0"; > - > - while ((c = getopt(argc, argv, "D:b:Cm:x:i:deIlhrwcs:")) != EOF) > - switch (c) { > - case 'D': > - test->device = optarg; > - continue; > - case 'b': > - test->barnum = atoi(optarg); > - if (test->barnum < 0 || test->barnum > 5) > - goto usage; > - continue; > - case 'C': > - test->consecutive_bar_test = true; > - continue; > - case 'l': > - test->legacyirq = true; > - continue; > - case 'm': > - test->msinum = atoi(optarg); > - if (test->msinum < 1 || test->msinum > 32) > - goto usage; > - continue; > - case 'x': > - test->msixnum = atoi(optarg); > - if (test->msixnum < 1 || test->msixnum > 2048) > - goto usage; > - continue; > - case 'i': > - test->irqtype = atoi(optarg); > - if (test->irqtype < 0 || test->irqtype > 2) > - goto usage; > - test->set_irqtype = true; > - continue; > - case 'I': > - test->get_irqtype = true; > - continue; > - case 'r': > - test->read = true; > - continue; > - case 'w': > - test->write = true; > - continue; > - case 'c': > - test->copy = true; > - continue; > - case 'e': > - test->clear_irq = true; > - continue; > - case 's': > - test->size = strtoul(optarg, NULL, 0); > - continue; > - case 'd': > - test->use_dma = true; > - continue; > - case 'h': > - default: > -usage: > - fprintf(stderr, > - "usage: %s [options]\n" > - "Options:\n" > - "\t-D <dev> PCI endpoint test device {default: /dev/pci-endpoint-test.0}\n" > - "\t-b <bar num> BAR test (bar number between 0..5)\n" > - "\t-C Consecutive BAR test\n" > - "\t-m <msi num> MSI test (msi number between 1..32)\n" > - "\t-x <msix num> \tMSI-X test (msix number between 1..2048)\n" > - "\t-i <irq type> \tSet IRQ type (0 - Legacy, 1 - MSI, 2 - MSI-X)\n" > - "\t-e Clear IRQ\n" > - "\t-I Get current IRQ type configured\n" > - "\t-d Use DMA\n" > - "\t-l Legacy IRQ test\n" > - "\t-r Read buffer test\n" > - "\t-w Write buffer test\n" > - "\t-c Copy buffer test\n" > - "\t-s <size> Size of buffer {default: 100KB}\n" > - "\t-h Print this help message\n", > - argv[0]); > - return -EINVAL; > - } > - > - return run_test(test); > -} > diff --git a/tools/testing/selftests/pci_endpoint/pcitest.sh b/tools/testing/selftests/pci_endpoint/pcitest.sh > deleted file mode 100644 > index 770f4d6df34b..000000000000 > --- a/tools/testing/selftests/pci_endpoint/pcitest.sh > +++ /dev/null > @@ -1,73 +0,0 @@ > -#!/bin/sh > -# SPDX-License-Identifier: GPL-2.0 > - > -echo "BAR tests" > -echo > - > -bar=0 > - > -while [ $bar -lt 6 ] > -do > - pcitest -b $bar > - bar=`expr $bar + 1` > -done > -pcitest -C > -echo > - > -echo "Interrupt tests" > -echo > - > -pcitest -i 0 > -pcitest -l > - > -pcitest -i 1 > -msi=1 > - > -while [ $msi -lt 33 ] > -do > - pcitest -m $msi > - msi=`expr $msi + 1` > -done > -echo > - > -pcitest -i 2 > -msix=1 > - > -while [ $msix -lt 2049 ] > -do > - pcitest -x $msix > - msix=`expr $msix + 1` > -done > -echo > - > -echo "Read Tests" > -echo > - > -pcitest -i 1 > - > -pcitest -r -s 1 > -pcitest -r -s 1024 > -pcitest -r -s 1025 > -pcitest -r -s 1024000 > -pcitest -r -s 1024001 > -echo > - > -echo "Write Tests" > -echo > - > -pcitest -w -s 1 > -pcitest -w -s 1024 > -pcitest -w -s 1025 > -pcitest -w -s 1024000 > -pcitest -w -s 1024001 > -echo > - > -echo "Copy Tests" > -echo > - > -pcitest -c -s 1 > -pcitest -c -s 1024 > -pcitest -c -s 1025 > -pcitest -c -s 1024000 > -pcitest -c -s 1024001 > -echo > -- > 2.25.1 > Reviewed-by: Niklas Cassel <cassel@kernel.org> ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest 2025-01-16 13:51 [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Manivannan Sadhasivam ` (3 preceding siblings ...) 2025-01-16 13:51 ` [PATCH v5 4/4] selftests: pci_endpoint: Migrate to Kselftest framework Manivannan Sadhasivam @ 2025-01-16 15:36 ` Niklas Cassel 2025-01-16 16:12 ` Manivannan Sadhasivam 4 siblings, 1 reply; 12+ messages in thread From: Niklas Cassel @ 2025-01-16 15:36 UTC (permalink / raw) To: Manivannan Sadhasivam Cc: kw, gregkh, arnd, lpieralisi, shuah, kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest On Thu, Jan 16, 2025 at 07:21:02PM +0530, Manivannan Sadhasivam wrote: > Hi, > > This series carries forward the effort to add Kselftest for PCI Endpoint > Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version > based on another patch that fixes the return values of IOCTLs in > pci_endpoint_test driver and did many cleanups. Since the resulting work > modified the initial version substantially, I took over the authorship. > > This series also incorporates the review comment by Shuah Khan [2] to move the > existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before > migrating to Kselftest framework. I made sure that the tests are executable in > each commit and updated documentation accordingly. > > - Mani > > [1] https://lore.kernel.org/linux-pci/20221007053934.5188-1-aman1.gupta@samsung.com > [2] https://lore.kernel.org/linux-pci/b2a5db97-dc59-33ab-71cd-f591e0b1b34d@linuxfoundation.org > > Changes in v5: > > * Incorporated comments from Niklas > * Added a patch to fix the DMA MEMCPY check in pci-epf-test driver > * Collected tags > * Rebased on top of pci/next 0333f56dbbf7ef6bb46d2906766c3e1b2a04a94d > > Changes in v4: > > * Dropped the BAR fix patches and submitted them separately: > https://lore.kernel.org/linux-pci/20241231130224.38206-1-manivannan.sadhasivam@linaro.org/ > * Rebased on top of pci/next 9e1b45d7a5bc0ad20f6b5267992da422884b916e > > Changes in v3: > > * Collected tags. > * Added a note about failing testcase 10 and command to skip it in > documentation. > * Removed Aman Gupta and Padmanabhan Rajanbabu from CC as their addresses are > bouncing. > > Changes in v2: > > * Added a patch that fixes return values of IOCTL in pci_endpoint_test driver > * Moved the existing tests to new location before migrating > * Added a fix for BARs on Qcom devices > * Updated documentation and also added fixture variants for memcpy & DMA modes > > > Manivannan Sadhasivam (4): > PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test > misc: pci_endpoint_test: Fix the return value of IOCTL > selftests: Move PCI Endpoint tests from tools/pci to Kselftests > selftests: pci_endpoint: Migrate to Kselftest framework > > Documentation/PCI/endpoint/pci-test-howto.rst | 170 +++++------ > MAINTAINERS | 2 +- > drivers/misc/pci_endpoint_test.c | 255 +++++++++-------- > drivers/pci/endpoint/functions/pci-epf-test.c | 4 +- > tools/pci/Build | 1 - > tools/pci/Makefile | 58 ---- > tools/pci/pcitest.c | 264 ------------------ > tools/pci/pcitest.sh | 73 ----- > tools/testing/selftests/Makefile | 1 + > .../testing/selftests/pci_endpoint/.gitignore | 2 + > tools/testing/selftests/pci_endpoint/Makefile | 7 + > tools/testing/selftests/pci_endpoint/config | 4 + > .../pci_endpoint/pci_endpoint_test.c | 221 +++++++++++++++ > 13 files changed, 435 insertions(+), 627 deletions(-) > delete mode 100644 tools/pci/Build > delete mode 100644 tools/pci/Makefile > delete mode 100644 tools/pci/pcitest.c > delete mode 100644 tools/pci/pcitest.sh > create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore > create mode 100644 tools/testing/selftests/pci_endpoint/Makefile > create mode 100644 tools/testing/selftests/pci_endpoint/config > create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c > > -- > 2.25.1 > I ran the test using simply: $ ./pci_endpoint_test and got: # RUN pci_ep_basic.MSIX_TEST ... # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X33 # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X34 # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X35 # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X36 # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X37 # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X38 # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X39 I think that you should also do: diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst index 7d0dbad61456..7d5049c884dd 100644 --- a/Documentation/PCI/endpoint/pci-test-howto.rst +++ b/Documentation/PCI/endpoint/pci-test-howto.rst @@ -81,8 +81,8 @@ device, the following commands can be used:: # echo 0x104c > functions/pci_epf_test/func1/vendorid # echo 0xb500 > functions/pci_epf_test/func1/deviceid - # echo 16 > functions/pci_epf_test/func1/msi_interrupts - # echo 8 > functions/pci_epf_test/func1/msix_interrupts + # echo 32 > functions/pci_epf_test/func1/msi_interrupts + # echo 2048 > functions/pci_epf_test/func1/msix_interrupts Such that the documentation suggests values that will actually make the pci_endpoint_test pass without any special parameters set. Other than that small nit, for the series: Tested-by: Niklas Cassel <cassel@kernel.org> ^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest 2025-01-16 15:36 ` [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Niklas Cassel @ 2025-01-16 16:12 ` Manivannan Sadhasivam 2025-01-16 16:39 ` Niklas Cassel 0 siblings, 1 reply; 12+ messages in thread From: Manivannan Sadhasivam @ 2025-01-16 16:12 UTC (permalink / raw) To: Niklas Cassel Cc: kw, gregkh, arnd, lpieralisi, shuah, kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest On Thu, Jan 16, 2025 at 04:36:07PM +0100, Niklas Cassel wrote: > On Thu, Jan 16, 2025 at 07:21:02PM +0530, Manivannan Sadhasivam wrote: > > Hi, > > > > This series carries forward the effort to add Kselftest for PCI Endpoint > > Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version > > based on another patch that fixes the return values of IOCTLs in > > pci_endpoint_test driver and did many cleanups. Since the resulting work > > modified the initial version substantially, I took over the authorship. > > > > This series also incorporates the review comment by Shuah Khan [2] to move the > > existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before > > migrating to Kselftest framework. I made sure that the tests are executable in > > each commit and updated documentation accordingly. > > > > - Mani > > > > [1] https://lore.kernel.org/linux-pci/20221007053934.5188-1-aman1.gupta@samsung.com > > [2] https://lore.kernel.org/linux-pci/b2a5db97-dc59-33ab-71cd-f591e0b1b34d@linuxfoundation.org > > > > Changes in v5: > > > > * Incorporated comments from Niklas > > * Added a patch to fix the DMA MEMCPY check in pci-epf-test driver > > * Collected tags > > * Rebased on top of pci/next 0333f56dbbf7ef6bb46d2906766c3e1b2a04a94d > > > > Changes in v4: > > > > * Dropped the BAR fix patches and submitted them separately: > > https://lore.kernel.org/linux-pci/20241231130224.38206-1-manivannan.sadhasivam@linaro.org/ > > * Rebased on top of pci/next 9e1b45d7a5bc0ad20f6b5267992da422884b916e > > > > Changes in v3: > > > > * Collected tags. > > * Added a note about failing testcase 10 and command to skip it in > > documentation. > > * Removed Aman Gupta and Padmanabhan Rajanbabu from CC as their addresses are > > bouncing. > > > > Changes in v2: > > > > * Added a patch that fixes return values of IOCTL in pci_endpoint_test driver > > * Moved the existing tests to new location before migrating > > * Added a fix for BARs on Qcom devices > > * Updated documentation and also added fixture variants for memcpy & DMA modes > > > > > > Manivannan Sadhasivam (4): > > PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test > > misc: pci_endpoint_test: Fix the return value of IOCTL > > selftests: Move PCI Endpoint tests from tools/pci to Kselftests > > selftests: pci_endpoint: Migrate to Kselftest framework > > > > Documentation/PCI/endpoint/pci-test-howto.rst | 170 +++++------ > > MAINTAINERS | 2 +- > > drivers/misc/pci_endpoint_test.c | 255 +++++++++-------- > > drivers/pci/endpoint/functions/pci-epf-test.c | 4 +- > > tools/pci/Build | 1 - > > tools/pci/Makefile | 58 ---- > > tools/pci/pcitest.c | 264 ------------------ > > tools/pci/pcitest.sh | 73 ----- > > tools/testing/selftests/Makefile | 1 + > > .../testing/selftests/pci_endpoint/.gitignore | 2 + > > tools/testing/selftests/pci_endpoint/Makefile | 7 + > > tools/testing/selftests/pci_endpoint/config | 4 + > > .../pci_endpoint/pci_endpoint_test.c | 221 +++++++++++++++ > > 13 files changed, 435 insertions(+), 627 deletions(-) > > delete mode 100644 tools/pci/Build > > delete mode 100644 tools/pci/Makefile > > delete mode 100644 tools/pci/pcitest.c > > delete mode 100644 tools/pci/pcitest.sh > > create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore > > create mode 100644 tools/testing/selftests/pci_endpoint/Makefile > > create mode 100644 tools/testing/selftests/pci_endpoint/config > > create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c > > > > -- > > 2.25.1 > > > > I ran the test using simply: > > $ ./pci_endpoint_test > > and got: > > # RUN pci_ep_basic.MSIX_TEST ... > # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) > # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X33 > # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) > # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X34 > # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) > # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X35 > # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) > # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X36 > # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) > # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X37 > # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) > # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X38 > # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) > # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X39 > > > I think that you should also do: > > diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst > index 7d0dbad61456..7d5049c884dd 100644 > --- a/Documentation/PCI/endpoint/pci-test-howto.rst > +++ b/Documentation/PCI/endpoint/pci-test-howto.rst > @@ -81,8 +81,8 @@ device, the following commands can be used:: > > # echo 0x104c > functions/pci_epf_test/func1/vendorid > # echo 0xb500 > functions/pci_epf_test/func1/deviceid > - # echo 16 > functions/pci_epf_test/func1/msi_interrupts > - # echo 8 > functions/pci_epf_test/func1/msix_interrupts > + # echo 32 > functions/pci_epf_test/func1/msi_interrupts > + # echo 2048 > functions/pci_epf_test/func1/msix_interrupts > > > Such that the documentation suggests values that will actually make the > pci_endpoint_test pass without any special parameters set. > Agree and this is what I am doing locally, but that change is not really related to this series. So I'll submit it separately. > > Other than that small nit, for the series: > Tested-by: Niklas Cassel <cassel@kernel.org> Thanks a lot! - Mani -- மணிவண்ணன் சதாசிவம் ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest 2025-01-16 16:12 ` Manivannan Sadhasivam @ 2025-01-16 16:39 ` Niklas Cassel 2025-01-16 17:10 ` Manivannan Sadhasivam 0 siblings, 1 reply; 12+ messages in thread From: Niklas Cassel @ 2025-01-16 16:39 UTC (permalink / raw) To: Manivannan Sadhasivam Cc: kw, gregkh, arnd, lpieralisi, shuah, kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest On 16 January 2025 17:12:27 CET, Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote: >On Thu, Jan 16, 2025 at 04:36:07PM +0100, Niklas Cassel wrote: >> On Thu, Jan 16, 2025 at 07:21:02PM +0530, Manivannan Sadhasivam wrote: >> > Hi, >> > >> > This series carries forward the effort to add Kselftest for PCI Endpoint >> > Subsystem started by Aman Gupta [1] a while ago. I reworked the initial version >> > based on another patch that fixes the return values of IOCTLs in >> > pci_endpoint_test driver and did many cleanups. Since the resulting work >> > modified the initial version substantially, I took over the authorship. >> > >> > This series also incorporates the review comment by Shuah Khan [2] to move the >> > existing tests from 'tools/pci' to 'tools/testing/kselftest/pci_endpoint' before >> > migrating to Kselftest framework. I made sure that the tests are executable in >> > each commit and updated documentation accordingly. >> > >> > - Mani >> > >> > [1] https://lore.kernel.org/linux-pci/20221007053934.5188-1-aman1.gupta@samsung.com >> > [2] https://lore.kernel.org/linux-pci/b2a5db97-dc59-33ab-71cd-f591e0b1b34d@linuxfoundation.org >> > >> > Changes in v5: >> > >> > * Incorporated comments from Niklas >> > * Added a patch to fix the DMA MEMCPY check in pci-epf-test driver >> > * Collected tags >> > * Rebased on top of pci/next 0333f56dbbf7ef6bb46d2906766c3e1b2a04a94d >> > >> > Changes in v4: >> > >> > * Dropped the BAR fix patches and submitted them separately: >> > https://lore.kernel.org/linux-pci/20241231130224.38206-1-manivannan.sadhasivam@linaro.org/ >> > * Rebased on top of pci/next 9e1b45d7a5bc0ad20f6b5267992da422884b916e >> > >> > Changes in v3: >> > >> > * Collected tags. >> > * Added a note about failing testcase 10 and command to skip it in >> > documentation. >> > * Removed Aman Gupta and Padmanabhan Rajanbabu from CC as their addresses are >> > bouncing. >> > >> > Changes in v2: >> > >> > * Added a patch that fixes return values of IOCTL in pci_endpoint_test driver >> > * Moved the existing tests to new location before migrating >> > * Added a fix for BARs on Qcom devices >> > * Updated documentation and also added fixture variants for memcpy & DMA modes >> > >> > >> > Manivannan Sadhasivam (4): >> > PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test >> > misc: pci_endpoint_test: Fix the return value of IOCTL >> > selftests: Move PCI Endpoint tests from tools/pci to Kselftests >> > selftests: pci_endpoint: Migrate to Kselftest framework >> > >> > Documentation/PCI/endpoint/pci-test-howto.rst | 170 +++++------ >> > MAINTAINERS | 2 +- >> > drivers/misc/pci_endpoint_test.c | 255 +++++++++-------- >> > drivers/pci/endpoint/functions/pci-epf-test.c | 4 +- >> > tools/pci/Build | 1 - >> > tools/pci/Makefile | 58 ---- >> > tools/pci/pcitest.c | 264 ------------------ >> > tools/pci/pcitest.sh | 73 ----- >> > tools/testing/selftests/Makefile | 1 + >> > .../testing/selftests/pci_endpoint/.gitignore | 2 + >> > tools/testing/selftests/pci_endpoint/Makefile | 7 + >> > tools/testing/selftests/pci_endpoint/config | 4 + >> > .../pci_endpoint/pci_endpoint_test.c | 221 +++++++++++++++ >> > 13 files changed, 435 insertions(+), 627 deletions(-) >> > delete mode 100644 tools/pci/Build >> > delete mode 100644 tools/pci/Makefile >> > delete mode 100644 tools/pci/pcitest.c >> > delete mode 100644 tools/pci/pcitest.sh >> > create mode 100644 tools/testing/selftests/pci_endpoint/.gitignore >> > create mode 100644 tools/testing/selftests/pci_endpoint/Makefile >> > create mode 100644 tools/testing/selftests/pci_endpoint/config >> > create mode 100644 tools/testing/selftests/pci_endpoint/pci_endpoint_test.c >> > >> > -- >> > 2.25.1 >> > >> >> I ran the test using simply: >> >> $ ./pci_endpoint_test >> >> and got: >> >> # RUN pci_ep_basic.MSIX_TEST ... >> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) >> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X33 >> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) >> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X34 >> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) >> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X35 >> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) >> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X36 >> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) >> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X37 >> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) >> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X38 >> # pci_endpoint_test.c:129:MSIX_TEST:Expected 0 (0) == ret (-110) >> # pci_endpoint_test.c:129:MSIX_TEST:Test failed for MSI-X39 >> >> >> I think that you should also do: >> >> diff --git a/Documentation/PCI/endpoint/pci-test-howto.rst b/Documentation/PCI/endpoint/pci-test-howto.rst >> index 7d0dbad61456..7d5049c884dd 100644 >> --- a/Documentation/PCI/endpoint/pci-test-howto.rst >> +++ b/Documentation/PCI/endpoint/pci-test-howto.rst >> @@ -81,8 +81,8 @@ device, the following commands can be used:: >> >> # echo 0x104c > functions/pci_epf_test/func1/vendorid >> # echo 0xb500 > functions/pci_epf_test/func1/deviceid >> - # echo 16 > functions/pci_epf_test/func1/msi_interrupts >> - # echo 8 > functions/pci_epf_test/func1/msix_interrupts >> + # echo 32 > functions/pci_epf_test/func1/msi_interrupts >> + # echo 2048 > functions/pci_epf_test/func1/msix_interrupts >> >> >> Such that the documentation suggests values that will actually make the >> pci_endpoint_test pass without any special parameters set. >> > >Agree and this is what I am doing locally, but that change is not really related >to this series. So I'll submit it separately. I don't not agree that it is not related, before this series the example output was: MSI1: OKAY - MSI2: OKAY - MSI3: OKAY - MSI4: OKAY - MSI5: OKAY - MSI6: OKAY - MSI7: OKAY - MSI8: OKAY - MSI9: OKAY - MSI10: OKAY - MSI11: OKAY - MSI12: OKAY - MSI13: OKAY - MSI14: OKAY - MSI15: OKAY - MSI16: OKAY - MSI17: NOT OKAY - MSI18: NOT OKAY - MSI19: NOT OKAY - MSI20: NOT OKAY - MSI21: NOT OKAY - MSI22: NOT OKAY - MSI23: NOT OKAY - MSI24: NOT OKAY - MSI25: NOT OKAY - MSI26: NOT OKAY - MSI27: NOT OKAY - MSI28: NOT OKAY - MSI29: NOT OKAY - MSI30: NOT OKAY - MSI31: NOT OKAY - MSI32: NOT OKAY - SET IRQ TYPE TO MSI-X: OKAY - MSI-X1: OKAY - MSI-X2: OKAY - MSI-X3: OKAY - MSI-X4: OKAY - MSI-X5: OKAY - MSI-X6: OKAY - MSI-X7: OKAY - MSI-X8: OKAY - MSI-X9: NOT OKAY - MSI-X10: NOT OKAY - MSI-X11: NOT OKAY - MSI-X12: NOT OKAY - MSI-X13: NOT OKAY - MSI-X14: NOT OKAY - MSI-X15: NOT OKAY - MSI-X16: NOT OKAY So the output matched the suggested values in the documentation. After this series, the documentation still suggests msi == 16 and msi-x == 8, but the example output now shows that there was no failures. So I think it is most consistent to just update the example in the same commit (in this series) that updates the output to show everything as good. Kind regards, Niklas > >> >> Other than that small nit, for the series: >> Tested-by: Niklas Cassel <cassel@kernel.org> > >Thanks a lot! > >- Mani > >-- >மணிவண்ணன் சதாசிவம் ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest 2025-01-16 16:39 ` Niklas Cassel @ 2025-01-16 17:10 ` Manivannan Sadhasivam 0 siblings, 0 replies; 12+ messages in thread From: Manivannan Sadhasivam @ 2025-01-16 17:10 UTC (permalink / raw) To: Niklas Cassel Cc: kw, gregkh, arnd, lpieralisi, shuah, kishon, linux-pci, linux-kernel, bhelgaas, linux-arm-msm, robh, linux-kselftest On Thu, Jan 16, 2025 at 05:39:30PM +0100, Niklas Cassel wrote: > [...] > So the output matched the suggested values in the documentation. > > After this series, the documentation still suggests msi == 16 and msi-x == 8, > but the example output now shows that > there was no failures. > Ah, I misunderstood what you meant. > > So I think it is most consistent to just update the example in the same commit (in this series) that updates the output to show everything as good. > Yeah, makes sense. Let me change it in next revision, thanks! - Mani -- மணிவண்ணன் சதாசிவம் ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2025-01-16 17:10 UTC | newest] Thread overview: 12+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-01-16 13:51 [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Manivannan Sadhasivam 2025-01-16 13:51 ` [PATCH v5 1/4] PCI: endpoint: pci-epf-test: Fix the check for DMA MEMCPY test Manivannan Sadhasivam 2025-01-16 15:10 ` Niklas Cassel 2025-01-16 13:51 ` [PATCH v5 2/4] misc: pci_endpoint_test: Fix the return value of IOCTL Manivannan Sadhasivam 2025-01-16 13:51 ` [PATCH v5 3/4] selftests: Move PCI Endpoint tests from tools/pci to Kselftests Manivannan Sadhasivam 2025-01-16 15:39 ` Niklas Cassel 2025-01-16 13:51 ` [PATCH v5 4/4] selftests: pci_endpoint: Migrate to Kselftest framework Manivannan Sadhasivam 2025-01-16 15:39 ` Niklas Cassel 2025-01-16 15:36 ` [PATCH v5 0/4] Migrate PCI Endpoint Subsystem tests to Kselftest Niklas Cassel 2025-01-16 16:12 ` Manivannan Sadhasivam 2025-01-16 16:39 ` Niklas Cassel 2025-01-16 17:10 ` Manivannan Sadhasivam
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox