Re: [PATCH v2 0/7] PCI: Solve two bridge window sizing issues

[Jonathan Woithe <jwoithe@just42.net>]

On Thu, Jan 11, 2024 at 06:30:22PM +1030, Jonathan Woithe wrote:
> On Thu, Jan 04, 2024 at 10:48:53PM +1030, Jonathan Woithe wrote:
> > On Thu, Jan 04, 2024 at 01:12:10PM +0100, Igor Mammedov wrote:
> > > On Thu, 28 Dec 2023 18:57:00 +0200
> > > Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> wrote:
> > > 
> > > > Hi all,
> > > > 
> > > > Here's a series that contains two fixes to PCI bridge window sizing
> > > > algorithm. Together, they should enable remove & rescan cycle to work
> > > > for a PCI bus that has PCI devices with optional resources and/or
> > > > disparity in BAR sizes.
> > > > 
> > > > For the second fix, I chose to expose find_empty_resource_slot() from
> > > > kernel/resource.c because it should increase accuracy of the cannot-fit
> > > > decision (currently that function is called find_resource()). In order
> > > > to do that sensibly, a few improvements seemed in order to make its
> > > > interface and name of the function sane before exposing it. Thus, the
> > > > few extra patches on resource side.
> > > > 
> > > > Unfortunately I don't have a reason to suspect these would help with
> > > > the issues related to the currently ongoing resource regression
> > > > thread [1].
> > > 
> > > Jonathan,
> > > can you test this series on affected machine with broken kernel to see if
> > > it's of any help in your case?
> > 
> > Certainly, but it will have to wait until next Thursday (11 Jan 2024).  I'm
> > still on leave this week, and when at work I only have physical access to
> > the machine concerned on Thursdays at present.
> > 
> > Which kernel would you prefer I apply the series to?
> 
> I was very short of time today but I did apply the above series to the
> 5.15.y branch (since I had this source available), resulting in version
> 5.15.141+.  Unfortunately, in the rush I forgot to do a clean after the
> bisect reset, so the resulting kernel was not correctly built.  It booted
> but thought it was a different version and therefore none of the modules
> could be found.  As a result, the test is invalid.
> 
> I will try again in a week when I next have physical access to the system. 
> Apologies for the delay.  In the meantime, if there's a specific kernel I
> should apply the patch series against please let me know.  As I understand
> it, you want it applied to one of the kernels which failed, making 5.15.y
> (for y < 145) a reasonable choice.

I did a "make clean" to reset the source tree and recompiled.  However, it
errored out:

  drivers/pci/setup-bus.c:988:24: error: ‘RESOURCE_SIZE_MAX’ undeclared
  drivers/pci/setup-bus.c:998:17: error: ‘pci_bus_for_each_resource’ undeclared

This was with the patch series applied against 5.15.141.  It seems the patch
targets a kernel that's too far removed from 5.15.x.

Which kernel would you like me to apply the patch series to and test?

Regards
  jonathan