Re: [RFC PATCH v1 2/2] PCI/AER: report fatal errors of RCiEP and EP if link recoverd

[Keith Busch <kbusch@kernel.org>]

On Wed, Nov 06, 2024 at 05:03:39PM +0800, Shuai Xue wrote:
> +int aer_get_device_fatal_error_info(struct pci_dev *dev, struct aer_err_info *info)
> +{
> +	int type = pci_pcie_type(dev);
> +	int aer = dev->aer_cap;
> +	u32 aercc;
> +
> +	pci_info(dev, "type :%d\n", type);
> +
> +	/* Must reset in this function */
> +	info->status = 0;
> +	info->tlp_header_valid = 0;
> +	info->severity = AER_FATAL;
> +
> +	/* The device might not support AER */
> +	if (!aer)
> +		return 0;
> +
> +
> +	if (type == PCI_EXP_TYPE_ENDPOINT || type == PCI_EXP_TYPE_RC_END) {
> +		/* Link is healthy for IO reads now */
> +		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS,
> +			&info->status);
> +		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK,
> +			&info->mask);
> +		if (!(info->status & ~info->mask))
> +			return 0;
> +
> +		/* Get First Error Pointer */
> +		pci_read_config_dword(dev, aer + PCI_ERR_CAP, &aercc);
> +		info->first_error = PCI_ERR_CAP_FEP(aercc);
> +
> +		if (info->status & AER_LOG_TLP_MASKS) {
> +			info->tlp_header_valid = 1;
> +			pcie_read_tlp_log(dev, aer + PCI_ERR_HEADER_LOG, &info->tlp);
> +		}

This matches the uncorrectable handling in aer_get_device_error_info, so
perhaps a helper to reduce duplication.

> +	}
> +
> +	return 1;
> +}

Returning '1' even if type is root or downstream port?

>  static inline void aer_process_err_devices(struct aer_err_info *e_info)
>  {
>  	int i;
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 31090770fffc..a74ae6a55064 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -196,6 +196,7 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>  	struct pci_dev *bridge;
>  	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
>  	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> +	struct aer_err_info info;
>  
>  	/*
>  	 * If the error was detected by a Root Port, Downstream Port, RCEC,
> @@ -223,6 +224,10 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>  			pci_warn(bridge, "subordinate device reset failed\n");
>  			goto failed;
>  		}
> +
> +		/* Link recovered, report fatal errors on RCiEP or EP */
> +		if (aer_get_device_fatal_error_info(dev, &info))
> +			aer_print_error(dev, &info);

This will always print the error info even for root and downstream
ports, but you initialize "info" status and mask only if it's an EP or
RCiEP.