* Kernel regression in 6.13 @ 2025-12-16 0:54 Adam Stylinski 2025-12-16 9:49 ` Ilpo Järvinen 0 siblings, 1 reply; 7+ messages in thread From: Adam Stylinski @ 2025-12-16 0:54 UTC (permalink / raw) To: linux-pci; +Cc: bhelgaas Hello, I seem to be encountering a regression that prevents my system from booting. The regression occurred between 6.12 and 6.13. I've bisected it to this commit: 665745f274870c921020f610e2c99a3b1613519b Some info about this system: it's ancient. It's a Q9650 that I used as a mythbackend/frontend for over a decade. This booting failure on newer kernels finally forced my hand to buy new a "new" PCI Express based tuner and upgrade the system into the modern age. It boots via MBR on a P45 based chipset (A P5Q Plus board, to be precise). Given the age, I chalked the issue up to possibly some failing hardware or memory corruption that happened at compile time. I recently pulled the system back out again to do some performance testing in zlib-ng only to find out it hangs on the latest Ubuntu server ISO. I figured at this point it wasn't something specific to my kernel config / compilation and it's likely a regression. It's also old enough that I may be in the position of the only one having this problem, so I took it upon myself to bisect what was going on. Let me know if there's anything you'd like me to test or try. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Kernel regression in 6.13 2025-12-16 0:54 Kernel regression in 6.13 Adam Stylinski @ 2025-12-16 9:49 ` Ilpo Järvinen 2025-12-16 13:57 ` Adam Stylinski 0 siblings, 1 reply; 7+ messages in thread From: Ilpo Järvinen @ 2025-12-16 9:49 UTC (permalink / raw) To: Adam Stylinski; +Cc: linux-pci, bhelgaas On Mon, 15 Dec 2025, Adam Stylinski wrote: > Hello, > > I seem to be encountering a regression that prevents my system from > booting. The regression occurred between 6.12 and 6.13. I've bisected > it to this commit: > 665745f274870c921020f610e2c99a3b1613519b > > Some info about this system: it's ancient. It's a Q9650 that I used as a > mythbackend/frontend for over a decade. This booting failure on newer > kernels finally forced my hand to buy new a "new" PCI Express based > tuner and upgrade the system into the modern age. It boots via MBR on a > P45 based chipset (A P5Q Plus board, to be precise). Given the age, I > chalked the issue up to possibly some failing hardware or memory > corruption that happened at compile time. I recently pulled the system > back out again to do some performance testing in zlib-ng only to find > out it hangs on the latest Ubuntu server ISO. I figured at this point it > wasn't something specific to my kernel config / compilation and it's > likely a regression. It's also old enough that I may be in the position > of the only one having this problem, so I took it upon myself to bisect > what was going on. Let me know if there's anything you'd like me to test > or try. Hi, Thanks for the report. In pcie_bwnotif_enable() there's pcie_capability_set_word() that enables bandwidth notifications: pcie_capability_set_word(port, PCI_EXP_LNKCTL, PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE); So as the first step change those PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE into 0 to see if not enabling the bandwitdh notification allows the system to come up. I suggest not trying this directly at the top of 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") but on a kernel that is expected to have fixes since 665745f27487 including those made to the other PCIe service drivers that share interrupt handler with bwctrl (so basically some stable version). If that works try to enable those bits one at a time. Please also send lspci -vvv. -- i. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Kernel regression in 6.13 2025-12-16 9:49 ` Ilpo Järvinen @ 2025-12-16 13:57 ` Adam Stylinski 2025-12-16 14:14 ` Ilpo Järvinen 0 siblings, 1 reply; 7+ messages in thread From: Adam Stylinski @ 2025-12-16 13:57 UTC (permalink / raw) To: Ilpo Järvinen; +Cc: linux-pci, bhelgaas On Tue, Dec 16, 2025 at 11:49:45AM +0200, Ilpo Järvinen wrote: > On Mon, 15 Dec 2025, Adam Stylinski wrote: > > > Hello, > > > > I seem to be encountering a regression that prevents my system from > > booting. The regression occurred between 6.12 and 6.13. I've bisected > > it to this commit: > > 665745f274870c921020f610e2c99a3b1613519b > > > > Some info about this system: it's ancient. It's a Q9650 that I used as a > > mythbackend/frontend for over a decade. This booting failure on newer > > kernels finally forced my hand to buy new a "new" PCI Express based > > tuner and upgrade the system into the modern age. It boots via MBR on a > > P45 based chipset (A P5Q Plus board, to be precise). Given the age, I > > chalked the issue up to possibly some failing hardware or memory > > corruption that happened at compile time. I recently pulled the system > > back out again to do some performance testing in zlib-ng only to find > > out it hangs on the latest Ubuntu server ISO. I figured at this point it > > wasn't something specific to my kernel config / compilation and it's > > likely a regression. It's also old enough that I may be in the position > > of the only one having this problem, so I took it upon myself to bisect > > what was going on. Let me know if there's anything you'd like me to test > > or try. > > Hi, > > Thanks for the report. > > In pcie_bwnotif_enable() there's pcie_capability_set_word() that enables > bandwidth notifications: > > pcie_capability_set_word(port, PCI_EXP_LNKCTL, > PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE); > > So as the first step change those PCI_EXP_LNKCTL_LBMIE | > PCI_EXP_LNKCTL_LABIE into 0 to see if not enabling the bandwitdh > notification allows the system to come up. > > I suggest not trying this directly at the top of 665745f27487 > ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") > but on a kernel that is expected to have fixes since 665745f27487 > including those made to the other PCIe service drivers that share > interrupt handler with bwctrl (so basically some stable version). > > If that works try to enable those bits one at a time. > > Please also send lspci -vvv. > > -- > i. > I'll try changing those values atop of the 6.18 tagged commit and let you know how it goes. Thanks for looking into this. The privileged lspci -vv output is below: 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Intel <unknown> 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: c000-cfff [size=4K] [16-bit] Memory behind bridge: fd000000-fe9fffff [size=26M] [32-bit] Prefetchable memory behind bridge: c0000000-dfffffff [size=512M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee02000 Data: 0020 Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+ SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 75W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd- AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- AtomicOpsCtl: ReqEn- EgressBlck- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at b800 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at b880 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bc00 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fcfffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] Vendor Specific Information: Intel <unknown> Kernel driver in use: ehci-pci 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 1000-1fff [size=4K] [16-bit] Memory behind bridge: f0000000-f01fffff [size=2M] [32-bit] Prefetchable memory behind bridge: fbf00000-fbffffff [size=1M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x0 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. Device 82d4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: e000-efff [size=4K] [16-bit] Memory behind bridge: feb00000-febfffff [size=1M] [32-bit] Prefetchable memory behind bridge: f0200000-f03fffff [size=2M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82d4 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=05 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: d000-dfff [size=4K] [16-bit] Memory behind bridge: fea00000-feafffff [size=1M] [32-bit] Prefetchable memory behind bridge: fbe00000-fbefffff [size=1M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=06 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at b080 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b400 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b480 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] Vendor Specific Information: Intel <unknown> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Subsystem: ASUSTeK Computer Inc. Device 82d4 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: [disabled] [16-bit] Memory behind bridge: [disabled] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4 00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller Subsystem: ASUSTeK Computer Inc. Device 82d4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Intel Feature Detection 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 25 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=32] Region 5: Memory at fcffe800 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Address: fee03000 Data: 0020 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] Vendor Specific Information: Intel <unknown> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fcfff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel modules: i2c_i801 01:00.0 VGA compatible controller: NVIDIA Corporation TU116 [GeForce GTX 1650 SUPER] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 87a5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at dc000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at cc00 [size=128] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Legacy Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s (downgraded), Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [250 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [258 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=255us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us Capabilities: [128 v1] Power Budgeting <?> Capabilities: [420 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [bb0 v1] Physical Resizable BAR BAR 0: current size: 16MB, supported: 16MB BAR 1: current size: 256MB, supported: 64MB 128MB 256MB BAR 3: current size: 32MB, supported: 32MB Kernel driver in use: nvidia Kernel modules: nvidia_drm, nvidia 01:00.1 Audio device: NVIDIA Corporation TU116 High Definition Audio Controller (rev a1) Subsystem: Hewlett-Packard Company Device 87a5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe9f8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s (downgraded), Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: snd_hda_intel 01:00.2 USB controller: NVIDIA Corporation TU116 USB 3.1 Host Controller (rev a1) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 87a5 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at dffc0000 (64-bit, prefetchable) [size=256K] Region 3: Memory at dffb0000 (64-bit, prefetchable) [size=64K] Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s (downgraded), Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [b4] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 01:00.3 Serial bus controller: NVIDIA Corporation TU116 USB Type-C UCSI Controller (rev a1) Subsystem: Hewlett-Packard Company Device 87a5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 5 Region 0: Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s (downgraded), Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [b4] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller (rev 02) Subsystem: ASUSTeK Computer Inc. M3A78 Series Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at d800 [size=256] Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fbef0000 (64-bit, prefetchable) [size=64K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Endpoint, IntMsgNum 1 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b0] MSI-X: Enable+ Count=2 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Unknown small resource type 05, will not decode more. Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8169 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller (prog-if 85 [PCI native mode-only controller, supports bus mastering]) Subsystem: ASUSTeK Computer Inc. Device 824f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Expansion ROM at febf0000 [disabled] [size=64K] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Express (v1) Legacy Endpoint, IntMsgNum 1 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: pata_jmicron ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Kernel regression in 6.13 2025-12-16 13:57 ` Adam Stylinski @ 2025-12-16 14:14 ` Ilpo Järvinen 2025-12-16 14:23 ` Adam Stylinski 0 siblings, 1 reply; 7+ messages in thread From: Ilpo Järvinen @ 2025-12-16 14:14 UTC (permalink / raw) To: Adam Stylinski; +Cc: linux-pci, bhelgaas [-- Attachment #1: Type: text/plain, Size: 5464 bytes --] On Tue, 16 Dec 2025, Adam Stylinski wrote: > On Tue, Dec 16, 2025 at 11:49:45AM +0200, Ilpo Järvinen wrote: > > On Mon, 15 Dec 2025, Adam Stylinski wrote: > > > > > Hello, > > > > > > I seem to be encountering a regression that prevents my system from > > > booting. The regression occurred between 6.12 and 6.13. I've bisected > > > it to this commit: > > > 665745f274870c921020f610e2c99a3b1613519b > > > > > > Some info about this system: it's ancient. It's a Q9650 that I used as a > > > mythbackend/frontend for over a decade. This booting failure on newer > > > kernels finally forced my hand to buy new a "new" PCI Express based > > > tuner and upgrade the system into the modern age. It boots via MBR on a > > > P45 based chipset (A P5Q Plus board, to be precise). Given the age, I > > > chalked the issue up to possibly some failing hardware or memory > > > corruption that happened at compile time. I recently pulled the system > > > back out again to do some performance testing in zlib-ng only to find > > > out it hangs on the latest Ubuntu server ISO. I figured at this point it > > > wasn't something specific to my kernel config / compilation and it's > > > likely a regression. It's also old enough that I may be in the position > > > of the only one having this problem, so I took it upon myself to bisect > > > what was going on. Let me know if there's anything you'd like me to test > > > or try. > > > > Hi, > > > > Thanks for the report. > > > > In pcie_bwnotif_enable() there's pcie_capability_set_word() that enables > > bandwidth notifications: > > > > pcie_capability_set_word(port, PCI_EXP_LNKCTL, > > PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE); > > > > So as the first step change those PCI_EXP_LNKCTL_LBMIE | > > PCI_EXP_LNKCTL_LABIE into 0 to see if not enabling the bandwitdh > > notification allows the system to come up. > > > > I suggest not trying this directly at the top of 665745f27487 > > ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") > > but on a kernel that is expected to have fixes since 665745f27487 > > including those made to the other PCIe service drivers that share > > interrupt handler with bwctrl (so basically some stable version). > > > > If that works try to enable those bits one at a time. > > > > Please also send lspci -vvv. > > > > -- > > i. > > > > I'll try changing those values atop of the 6.18 tagged commit and let you know how it goes. Thanks for looking into this. > The privileged lspci -vv output is below: > > 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Intel <unknown> > > 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 24 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: c000-cfff [size=4K] [16-bit] > Memory behind bridge: fd000000-fe9fffff [size=26M] [32-bit] > Prefetchable memory behind bridge: c0000000-dfffffff [size=512M] [32-bit] > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee02000 Data: 0020 > Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0 > DevCap: MaxPayload 128 bytes, PhantFunc 0 > ExtTag- RBE+ TEE-IO- > DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- > LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns > ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- > LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- > LnkSta: Speed 2.5GT/s, Width x16 > TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+ At least this Root Port has both BWMgmt and ABWMgmt asserted (not a problem in itself, necessarily). If you get the system working by changing that set_word call, it's worth to check if these got reasserted (bwctrl tries to clear them right after the set word call but it could be they get reasserted). -- i. ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Kernel regression in 6.13 2025-12-16 14:14 ` Ilpo Järvinen @ 2025-12-16 14:23 ` Adam Stylinski 2025-12-18 13:54 ` Ilpo Järvinen 0 siblings, 1 reply; 7+ messages in thread From: Adam Stylinski @ 2025-12-16 14:23 UTC (permalink / raw) To: Ilpo Järvinen; +Cc: linux-pci, bhelgaas On Tue, Dec 16, 2025 at 04:14:10PM +0200, Ilpo Järvinen wrote: > On Tue, 16 Dec 2025, Adam Stylinski wrote: > > > On Tue, Dec 16, 2025 at 11:49:45AM +0200, Ilpo Järvinen wrote: > > > On Mon, 15 Dec 2025, Adam Stylinski wrote: > > > > > > > Hello, > > > > > > > > I seem to be encountering a regression that prevents my system from > > > > booting. The regression occurred between 6.12 and 6.13. I've bisected > > > > it to this commit: > > > > 665745f274870c921020f610e2c99a3b1613519b > > > > > > > > Some info about this system: it's ancient. It's a Q9650 that I used as a > > > > mythbackend/frontend for over a decade. This booting failure on newer > > > > kernels finally forced my hand to buy new a "new" PCI Express based > > > > tuner and upgrade the system into the modern age. It boots via MBR on a > > > > P45 based chipset (A P5Q Plus board, to be precise). Given the age, I > > > > chalked the issue up to possibly some failing hardware or memory > > > > corruption that happened at compile time. I recently pulled the system > > > > back out again to do some performance testing in zlib-ng only to find > > > > out it hangs on the latest Ubuntu server ISO. I figured at this point it > > > > wasn't something specific to my kernel config / compilation and it's > > > > likely a regression. It's also old enough that I may be in the position > > > > of the only one having this problem, so I took it upon myself to bisect > > > > what was going on. Let me know if there's anything you'd like me to test > > > > or try. > > > > > > Hi, > > > > > > Thanks for the report. > > > > > > In pcie_bwnotif_enable() there's pcie_capability_set_word() that enables > > > bandwidth notifications: > > > > > > pcie_capability_set_word(port, PCI_EXP_LNKCTL, > > > PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE); > > > > > > So as the first step change those PCI_EXP_LNKCTL_LBMIE | > > > PCI_EXP_LNKCTL_LABIE into 0 to see if not enabling the bandwitdh > > > notification allows the system to come up. > > > > > > I suggest not trying this directly at the top of 665745f27487 > > > ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") > > > but on a kernel that is expected to have fixes since 665745f27487 > > > including those made to the other PCIe service drivers that share > > > interrupt handler with bwctrl (so basically some stable version). > > > > > > If that works try to enable those bits one at a time. > > > > > > Please also send lspci -vvv. > > > > > > -- > > > i. > > > > > > > I'll try changing those values atop of the 6.18 tagged commit and let you know how it goes. Thanks for looking into this. > > The privileged lspci -vv output is below: > > > > 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > > Latency: 0 > > Capabilities: [e0] Vendor Specific Information: Intel <unknown> > > > > 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > Latency: 0, Cache Line Size: 32 bytes > > Interrupt: pin A routed to IRQ 24 > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > > I/O behind bridge: c000-cfff [size=4K] [16-bit] > > Memory behind bridge: fd000000-fe9fffff [size=26M] [32-bit] > > Prefetchable memory behind bridge: c0000000-dfffffff [size=512M] [32-bit] > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > Capabilities: [80] Power Management version 3 > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > > Address: fee02000 Data: 0020 > > Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0 > > DevCap: MaxPayload 128 bytes, PhantFunc 0 > > ExtTag- RBE+ TEE-IO- > > DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- > > LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns > > ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- > > LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- > > LnkSta: Speed 2.5GT/s, Width x16 > > TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+ > > At least this Root Port has both BWMgmt and ABWMgmt asserted (not a > problem in itself, necessarily). > > If you get the system working by changing that set_word call, it's worth > to check if these got reasserted (bwctrl tries to clear them right after > the set word call but it could be they get reasserted). > > -- > i. Yes, I was able to boot after forcing those flags to zero. Here's lspci -vvv after booting into 6.18: 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Intel <unknown> lspci: Unable to load libkmod resources: error -2 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: c000-cfff [size=4K] [16-bit] Memory behind bridge: fd000000-fe9fffff [size=26M] [32-bit] Prefetchable memory behind bridge: c0000000-dfffffff [size=512M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee02000 Data: 0020 Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 75W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd- AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- AtomicOpsCtl: ReqEn- EgressBlck- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [140 v1] Root Complex Link Desc: PortNumber=02 ComponentID=01 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed19000 Kernel driver in use: pcieport 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at b800 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at b880 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bc00 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fcfffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] Vendor Specific Information: Intel <unknown> Kernel driver in use: ehci-pci 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 1000-1fff [size=4K] [16-bit] Memory behind bridge: f0000000-f01fffff [size=2M] [32-bit] Prefetchable memory behind bridge: fbf00000-fbffffff [size=1M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x0 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. Device 82d4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: e000-efff [size=4K] [16-bit] Memory behind bridge: feb00000-febfffff [size=1M] [32-bit] Prefetchable memory behind bridge: f0200000-f03fffff [size=2M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 82d4 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=05 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 16 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: d000-dfff [size=4K] [16-bit] Memory behind bridge: fea00000-feafffff [size=1M] [32-bit] Prefetchable memory behind bridge: fbe00000-fbefffff [size=1M] [32-bit] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #0, PowerLimit 10W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCap: CRSVisible- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [90] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=06 ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 Kernel driver in use: pcieport 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at b080 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b400 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b480 [size=32] Capabilities: [50] Vendor Specific Information: Intel <unknown> Kernel driver in use: uhci_hcd 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fcfff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] Vendor Specific Information: Intel <unknown> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode]) Subsystem: ASUSTeK Computer Inc. Device 82d4 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: f000-0fff [disabled] [16-bit] Memory behind bridge: fff00000-000fffff [disabled] [32-bit] Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [disabled] [64-bit] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4 00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller Subsystem: ASUSTeK Computer Inc. Device 82d4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Intel Feature Detection 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 25 Region 0: I/O ports at ac00 [size=8] Region 1: I/O ports at a880 [size=4] Region 2: I/O ports at a800 [size=8] Region 3: I/O ports at a480 [size=4] Region 4: I/O ports at a400 [size=32] Region 5: Memory at fcffe800 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit- Address: fee03000 Data: 0020 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] Vendor Specific Information: Intel <unknown> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 15 Region 0: Memory at fcfff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 01:00.0 VGA compatible controller: NVIDIA Corporation TU116 [GeForce GTX 1650 SUPER] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 87a5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at dc000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at cc00 [size=128] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Legacy Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s (downgraded), Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [250 v1] Latency Tolerance Reporting Max snoop latency: 0ns Max no snoop latency: 0ns Capabilities: [258 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=255us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=0ns L1SubCtl2: T_PwrOn=10us Capabilities: [128 v1] Power Budgeting <?> Capabilities: [420 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Capabilities: [900 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [bb0 v1] Physical Resizable BAR BAR 0: current size: 16MB, supported: 16MB BAR 1: current size: 256MB, supported: 64MB 128MB 256MB BAR 3: current size: 32MB, supported: 32MB 01:00.1 Audio device: NVIDIA Corporation TU116 High Definition Audio Controller (rev a1) Subsystem: Hewlett-Packard Company Device 87a5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe9f8000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s (downgraded), Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: snd_hda_intel 01:00.2 USB controller: NVIDIA Corporation TU116 USB 3.1 Host Controller (rev a1) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 87a5 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at dffc0000 (64-bit, prefetchable) [size=256K] Region 3: Memory at dffb0000 (64-bit, prefetchable) [size=64K] Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s (downgraded), Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [b4] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 01:00.3 Serial bus controller: NVIDIA Corporation TU116 USB Type-C UCSI Controller (rev a1) Subsystem: Hewlett-Packard Company Device 87a5 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 5 Region 0: Memory at fe9ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [78] Express (v2) Endpoint, IntMsgNum 0 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s (downgraded), Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- AtomicOpsCtl: ReqEn- IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- Capabilities: [b4] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr+ BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller (rev 02) Subsystem: ASUSTeK Computer Inc. M3A78 Series Motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at d800 [size=256] Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at fbef0000 (64-bit, prefetchable) [size=64K] Expansion ROM at feac0000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Endpoint, IntMsgNum 1 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 10W TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <512ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [b0] MSI-X: Enable+ Count=2 Masked- Vector table: BAR=4 offset=00000000 PBA: BAR=4 offset=00000800 Capabilities: [d0] Vital Product Data Unknown small resource type 05, will not decode more. Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- UncorrIntErr- BlockedTLP- AtomicOpBlocked- TLPBlockedErr- PoisonTLPBlocked- DMWrReqBlocked- IDECheck- MisIDETLP- PCRC_CHECK- TLPXlatBlocked- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CorrIntErr- HeaderOF- AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [140 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- Capabilities: [160 v1] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8169 03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller (prog-if 85 [PCI native mode-only controller, supports bus mastering]) Subsystem: ASUSTeK Computer Inc. Device 824f Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Expansion ROM at febf0000 [disabled] [size=64K] Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Express (v1) Legacy Endpoint, IntMsgNum 1 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- TEE-IO- DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- LnkSta: Speed 2.5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel driver in use: pata_jmicron ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Kernel regression in 6.13 2025-12-16 14:23 ` Adam Stylinski @ 2025-12-18 13:54 ` Ilpo Järvinen [not found] ` <aURK74sGvdTGBMdb@eggsbenedict> 0 siblings, 1 reply; 7+ messages in thread From: Ilpo Järvinen @ 2025-12-18 13:54 UTC (permalink / raw) To: Adam Stylinski; +Cc: linux-pci, bhelgaas [-- Attachment #1: Type: text/plain, Size: 14233 bytes --] On Tue, 16 Dec 2025, Adam Stylinski wrote: > On Tue, Dec 16, 2025 at 04:14:10PM +0200, Ilpo Järvinen wrote: > > On Tue, 16 Dec 2025, Adam Stylinski wrote: > > > > > On Tue, Dec 16, 2025 at 11:49:45AM +0200, Ilpo Järvinen wrote: > > > > On Mon, 15 Dec 2025, Adam Stylinski wrote: > > > > > > > > > Hello, > > > > > > > > > > I seem to be encountering a regression that prevents my system from > > > > > booting. The regression occurred between 6.12 and 6.13. I've bisected > > > > > it to this commit: > > > > > 665745f274870c921020f610e2c99a3b1613519b > > > > > > > > > > Some info about this system: it's ancient. It's a Q9650 that I used as a > > > > > mythbackend/frontend for over a decade. This booting failure on newer > > > > > kernels finally forced my hand to buy new a "new" PCI Express based > > > > > tuner and upgrade the system into the modern age. It boots via MBR on a > > > > > P45 based chipset (A P5Q Plus board, to be precise). Given the age, I > > > > > chalked the issue up to possibly some failing hardware or memory > > > > > corruption that happened at compile time. I recently pulled the system > > > > > back out again to do some performance testing in zlib-ng only to find > > > > > out it hangs on the latest Ubuntu server ISO. I figured at this point it > > > > > wasn't something specific to my kernel config / compilation and it's > > > > > likely a regression. It's also old enough that I may be in the position > > > > > of the only one having this problem, so I took it upon myself to bisect > > > > > what was going on. Let me know if there's anything you'd like me to test > > > > > or try. > > > > > > > > Hi, > > > > > > > > Thanks for the report. > > > > > > > > In pcie_bwnotif_enable() there's pcie_capability_set_word() that enables > > > > bandwidth notifications: > > > > > > > > pcie_capability_set_word(port, PCI_EXP_LNKCTL, > > > > PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE); > > > > > > > > So as the first step change those PCI_EXP_LNKCTL_LBMIE | > > > > PCI_EXP_LNKCTL_LABIE into 0 to see if not enabling the bandwitdh > > > > notification allows the system to come up. > > > > > > > > I suggest not trying this directly at the top of 665745f27487 > > > > ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") > > > > but on a kernel that is expected to have fixes since 665745f27487 > > > > including those made to the other PCIe service drivers that share > > > > interrupt handler with bwctrl (so basically some stable version). > > > > > > > > If that works try to enable those bits one at a time. > > > > > > > > Please also send lspci -vvv. > > > > > > > > -- > > > > i. > > > > > > > > > > I'll try changing those values atop of the 6.18 tagged commit and let you know how it goes. Thanks for looking into this. > > > The privileged lspci -vv output is below: > > > > > > 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) > > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > > > Latency: 0 > > > Capabilities: [e0] Vendor Specific Information: Intel <unknown> > > > > > > 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) > > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > Latency: 0, Cache Line Size: 32 bytes > > > Interrupt: pin A routed to IRQ 24 > > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > > > I/O behind bridge: c000-cfff [size=4K] [16-bit] > > > Memory behind bridge: fd000000-fe9fffff [size=26M] [32-bit] > > > Prefetchable memory behind bridge: c0000000-dfffffff [size=512M] [32-bit] > > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > > BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- > > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > > Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > Capabilities: [80] Power Management version 3 > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > > > Address: fee02000 Data: 0020 > > > Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0 > > > DevCap: MaxPayload 128 bytes, PhantFunc 0 > > > ExtTag- RBE+ TEE-IO- > > > DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- > > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- > > > LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns > > > ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- > > > LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ > > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- > > > LnkSta: Speed 2.5GT/s, Width x16 > > > TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+ > > > > At least this Root Port has both BWMgmt and ABWMgmt asserted (not a > > problem in itself, necessarily). > > > > If you get the system working by changing that set_word call, it's worth > > to check if these got reasserted (bwctrl tries to clear them right after > > the set word call but it could be they get reasserted). > > > > -- > > i. > > Yes, I was able to boot after forcing those flags to zero. Here's lspci -vvv after booting into 6.18: > > 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Intel <unknown> > lspci: Unable to load libkmod resources: error -2 > > 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 24 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: c000-cfff [size=4K] [16-bit] > Memory behind bridge: fd000000-fe9fffff [size=26M] [32-bit] > Prefetchable memory behind bridge: c0000000-dfffffff [size=512M] [32-bit] > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > Capabilities: [80] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee02000 Data: 0020 > Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0 > DevCap: MaxPayload 128 bytes, PhantFunc 0 > ExtTag- RBE+ TEE-IO- > DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- > LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns > ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- > LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- > LnkSta: Speed 2.5GT/s, Width x16 > TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #0, PowerLimit 75W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState- > RootCap: CRSVisible- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR- > 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- > EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- > FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd- > AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS- > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- > AtomicOpsCtl: ReqEn- EgressBlck- > IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- > 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- > EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- > Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > Capabilities: [140 v1] Root Complex Link > Desc: PortNumber=02 ComponentID=01 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ > Addr: 00000000fed19000 > Kernel driver in use: pcieport Hi. Here's a quirk patch to disable bwctrl on this Root Port, assuming I guessed the PCI device ID for it right, please check it matches to 00:01.0 (I should have asked lspci with -n to see the raw number but you can easily correct it yourself too before compiling the kernel). From 1e13651f8789fb9df060269a7b7c396211d910f8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com> Date: Thu, 18 Dec 2025 15:45:25 +0200 Subject: [PATCH 1/1] PCI/bwctrl: Disable BW controller on Intel P45 using a quirk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") was found to lead to a boot hang on a Intel P45 system. Testing without setting Link Bandwidth Management Interrupt Enable (LBMIE) and Link Autonomous Bandwidth Interrupt Enable (LABIE) (PCIe r7.0, sec. 7.5.3.7) in bwctrl allowed system to come up. Add no_bw_notif into the struct pci_dev and quirk Intel P45 Root Port with it. Reported-by: Adam Stylinski <kungfujesus06@gmail.com> Link: https://lore.kernel.org/linux-pci/aUCt1tHhm_-XIVvi@eggsbenedict/ Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- drivers/pci/pcie/bwctrl.c | 3 +++ drivers/pci/quirks.c | 10 ++++++++++ include/linux/pci.h | 1 + 3 files changed, 14 insertions(+) diff --git a/drivers/pci/pcie/bwctrl.c b/drivers/pci/pcie/bwctrl.c index 36f939f23d34..4ae92c9f912a 100644 --- a/drivers/pci/pcie/bwctrl.c +++ b/drivers/pci/pcie/bwctrl.c @@ -250,6 +250,9 @@ static int pcie_bwnotif_probe(struct pcie_device *srv) struct pci_dev *port = srv->port; int ret; + if (port->no_bw_notif) + return -ENODEV; + /* Can happen if we run out of bus numbers during enumeration. */ if (!port->subordinate) return -ENODEV; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b9c252aa6fe0..6ef42a2c4831 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1359,6 +1359,16 @@ static void quirk_transparent_bridge(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); +/* + * Enabling Link Bandwidth Management Interrupts (BW notifications) can cause + * boot hangs on P45. + */ +static void quirk_p45_bw_notifications(struct pci_dev *dev) +{ + dev->no_bw_notif = 1; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e21, quirk_p45_bw_notifications); + /* * Common misconfiguration of the MediaGX/Geode PCI master that will reduce * PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 datasheets diff --git a/include/linux/pci.h b/include/linux/pci.h index 864775651c6f..3a556cd749e3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -406,6 +406,7 @@ struct pci_dev { user sysfs */ unsigned int clear_retrain_link:1; /* Need to clear Retrain Link bit manually */ + unsigned int no_bw_notif:1; /* BW notifications may cause issues */ unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */ unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8 -- 2.39.5 ^ permalink raw reply related [flat|nested] 7+ messages in thread
[parent not found: <aURK74sGvdTGBMdb@eggsbenedict>]
[parent not found: <3fd99997-a639-d971-e43e-bcc973aa6d04@linux.intel.com>]
[parent not found: <aUWG4H3GH-k2ebpa@eggsbenedict>]
[parent not found: <aVyBBOXXDEN8dses@thinkpad>]
[parent not found: <2c078897-3a1e-a016-1d93-237cfb71fb94@linux.intel.com>]
[parent not found: <aWgnZLSenkOiXiuM@thinkpad>]
* Re: Kernel regression in 6.13 [not found] ` <aWgnZLSenkOiXiuM@thinkpad> @ 2026-01-14 23:40 ` Adam Stylinski 0 siblings, 0 replies; 7+ messages in thread From: Adam Stylinski @ 2026-01-14 23:40 UTC (permalink / raw) To: Ilpo Järvinen; +Cc: linux-pci On Wed, Jan 14, 2026 at 06:31:51PM -0500, Adam Stylinski wrote: > On Tue, Jan 13, 2026 at 07:15:11PM +0200, Ilpo Järvinen wrote: > > On Mon, 5 Jan 2026, Adam Stylinski wrote: > > > > > On Fri, Dec 19, 2025 at 12:09:52PM -0500, Adam Stylinski wrote: > > > > On Fri, Dec 19, 2025 at 05:28:09PM +0200, Ilpo Järvinen wrote: > > > > > On Thu, 18 Dec 2025, Adam Stylinski wrote: > > > > > > > > > > > On Thu, Dec 18, 2025 at 03:54:32PM +0200, Ilpo Järvinen wrote: > > > > > > > On Tue, 16 Dec 2025, Adam Stylinski wrote: > > > > > > > > On Tue, Dec 16, 2025 at 04:14:10PM +0200, Ilpo Järvinen wrote: > > > > > > > > > On Tue, 16 Dec 2025, Adam Stylinski wrote: > > > > > > > > > > > > > > > > > > > On Tue, Dec 16, 2025 at 11:49:45AM +0200, Ilpo Järvinen wrote: > > > > > > > > > > > On Mon, 15 Dec 2025, Adam Stylinski wrote: > > > > > > > > > > > > > > > > > > > > > > > Hello, > > > > > > > > > > > > > > > > > > > > > > > > I seem to be encountering a regression that prevents my system from > > > > > > > > > > > > booting. The regression occurred between 6.12 and 6.13. I've bisected > > > > > > > > > > > > it to this commit: > > > > > > > > > > > > 665745f274870c921020f610e2c99a3b1613519b > > > > > > > > > > > > > > > > > > > > > > > > Some info about this system: it's ancient. It's a Q9650 that I used as a > > > > > > > > > > > > mythbackend/frontend for over a decade. This booting failure on newer > > > > > > > > > > > > kernels finally forced my hand to buy new a "new" PCI Express based > > > > > > > > > > > > tuner and upgrade the system into the modern age. It boots via MBR on a > > > > > > > > > > > > P45 based chipset (A P5Q Plus board, to be precise). Given the age, I > > > > > > > > > > > > chalked the issue up to possibly some failing hardware or memory > > > > > > > > > > > > corruption that happened at compile time. I recently pulled the system > > > > > > > > > > > > back out again to do some performance testing in zlib-ng only to find > > > > > > > > > > > > out it hangs on the latest Ubuntu server ISO. I figured at this point it > > > > > > > > > > > > wasn't something specific to my kernel config / compilation and it's > > > > > > > > > > > > likely a regression. It's also old enough that I may be in the position > > > > > > > > > > > > of the only one having this problem, so I took it upon myself to bisect > > > > > > > > > > > > what was going on. Let me know if there's anything you'd like me to test > > > > > > > > > > > > or try. > > > > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > Thanks for the report. > > > > > > > > > > > > > > > > > > > > > > In pcie_bwnotif_enable() there's pcie_capability_set_word() that enables > > > > > > > > > > > bandwidth notifications: > > > > > > > > > > > > > > > > > > > > > > pcie_capability_set_word(port, PCI_EXP_LNKCTL, > > > > > > > > > > > PCI_EXP_LNKCTL_LBMIE | PCI_EXP_LNKCTL_LABIE); > > > > > > > > > > > > > > > > > > > > > > So as the first step change those PCI_EXP_LNKCTL_LBMIE | > > > > > > > > > > > PCI_EXP_LNKCTL_LABIE into 0 to see if not enabling the bandwitdh > > > > > > > > > > > notification allows the system to come up. > > > > > > > > > > > > > > > > > > > > > > I suggest not trying this directly at the top of 665745f27487 > > > > > > > > > > > ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") > > > > > > > > > > > but on a kernel that is expected to have fixes since 665745f27487 > > > > > > > > > > > including those made to the other PCIe service drivers that share > > > > > > > > > > > interrupt handler with bwctrl (so basically some stable version). > > > > > > > > > > > > > > > > > > > > > > If that works try to enable those bits one at a time. > > > > > > > > > > > > > > > > > > > > > > Please also send lspci -vvv. > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > i. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I'll try changing those values atop of the 6.18 tagged commit and let you know how it goes. Thanks for looking into this. > > > > > > > > > > The privileged lspci -vv output is below: > > > > > > > > > > > > > > > > > > > > 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) > > > > > > > > > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > > > > > > > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > > > > > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > > > > > > > > > > Latency: 0 > > > > > > > > > > Capabilities: [e0] Vendor Specific Information: Intel <unknown> > > > > > > > > > > > > > > > > > > > > 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) > > > > > > > > > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > > > > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > > > > > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > > > > > > Latency: 0, Cache Line Size: 32 bytes > > > > > > > > > > Interrupt: pin A routed to IRQ 24 > > > > > > > > > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > > > > > > > > > > I/O behind bridge: c000-cfff [size=4K] [16-bit] > > > > > > > > > > Memory behind bridge: fd000000-fe9fffff [size=26M] [32-bit] > > > > > > > > > > Prefetchable memory behind bridge: c0000000-dfffffff [size=512M] [32-bit] > > > > > > > > > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > > > > > > > > > BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- > > > > > > > > > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > > > > > > > > > Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > > > > > > > > Capabilities: [80] Power Management version 3 > > > > > > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > > > > > > > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > > > > > > > > > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > > > > > > > > > > Address: fee02000 Data: 0020 > > > > > > > > > > Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0 > > > > > > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0 > > > > > > > > > > ExtTag- RBE+ TEE-IO- > > > > > > > > > > DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- > > > > > > > > > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > > > > > > > > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > > > > > > > > > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- > > > > > > > > > > LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns > > > > > > > > > > ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- > > > > > > > > > > LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ > > > > > > > > > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- > > > > > > > > > > LnkSta: Speed 2.5GT/s, Width x16 > > > > > > > > > > TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt+ > > > > > > > > > > > > > > > > > > At least this Root Port has both BWMgmt and ABWMgmt asserted (not a > > > > > > > > > problem in itself, necessarily). > > > > > > > > > > > > > > > > > > If you get the system working by changing that set_word call, it's worth > > > > > > > > > to check if these got reasserted (bwctrl tries to clear them right after > > > > > > > > > the set word call but it could be they get reasserted). > > > > > > > > > > > > > > > > > > -- > > > > > > > > > i. > > > > > > > > > > > > > > > > Yes, I was able to boot after forcing those flags to zero. Here's lspci -vvv after booting into 6.18: > > > > > > > > > > > > > > > > 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) > > > > > > > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > > > > > > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > > > > > > > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- > > > > > > > > Latency: 0 > > > > > > > > Capabilities: [e0] Vendor Specific Information: Intel <unknown> > > > > > > > > lspci: Unable to load libkmod resources: error -2 > > > > > > > > > > > > > > > > 00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03) (prog-if 00 [Normal decode]) > > > > > > > > Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > > > > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > > > > > > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > > > > > > > Latency: 0, Cache Line Size: 32 bytes > > > > > > > > Interrupt: pin A routed to IRQ 24 > > > > > > > > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > > > > > > > > I/O behind bridge: c000-cfff [size=4K] [16-bit] > > > > > > > > Memory behind bridge: fd000000-fe9fffff [size=26M] [32-bit] > > > > > > > > Prefetchable memory behind bridge: c0000000-dfffffff [size=512M] [32-bit] > > > > > > > > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- > > > > > > > > BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- > > > > > > > > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > > > > > > > Capabilities: [88] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard > > > > > > > > Capabilities: [80] Power Management version 3 > > > > > > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > > > > > > > > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > > > > > > > > Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- > > > > > > > > Address: fee02000 Data: 0020 > > > > > > > > Capabilities: [a0] Express (v2) Root Port (Slot+), IntMsgNum 0 > > > > > > > > DevCap: MaxPayload 128 bytes, PhantFunc 0 > > > > > > > > ExtTag- RBE+ TEE-IO- > > > > > > > > DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- > > > > > > > > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > > > > > > > > MaxPayload 128 bytes, MaxReadReq 128 bytes > > > > > > > > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend- > > > > > > > > LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns > > > > > > > > ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- > > > > > > > > LnkCtl: ASPM Disabled; RCB 64 bytes, LnkDisable- CommClk+ > > > > > > > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- FltModeDis- > > > > > > > > LnkSta: Speed 2.5GT/s, Width x16 > > > > > > > > TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > > > > > > > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > > > > > > > > Slot #0, PowerLimit 75W; Interlock- NoCompl- > > > > > > > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > > > > > > > > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > > > > > > > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > > > > > > > > Changed: MRL- PresDet+ LinkState- > > > > > > > > RootCap: CRSVisible- > > > > > > > > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > > > > > > > > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > > > > > > > > DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR- > > > > > > > > 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- > > > > > > > > EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- > > > > > > > > FRS- LN System CLS Not Supported, TPHComp- ExtTPHComp- ARIFwd- > > > > > > > > AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS- > > > > > > > > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd- > > > > > > > > AtomicOpsCtl: ReqEn- EgressBlck- > > > > > > > > IDOReq- IDOCompl- LTR- EmergencyPowerReductionReq- > > > > > > > > 10BitTagReq- OBFF Disabled, EETLPPrefixBlk- > > > > > > > > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- > > > > > > > > Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > > > > > > > > Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot > > > > > > > > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- > > > > > > > > EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- > > > > > > > > Retimer- 2Retimers- CrosslinkRes: unsupported, FltMode- > > > > > > > > Capabilities: [100 v1] Virtual Channel > > > > > > > > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > > > > > > > > Arb: Fixed- WRR32- WRR64- WRR128- > > > > > > > > Ctrl: ArbSelect=Fixed > > > > > > > > Status: InProgress- > > > > > > > > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > > > > > > > > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > > > > > > > > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > > > > > > > > Status: NegoPending- InProgress- > > > > > > > > Capabilities: [140 v1] Root Complex Link > > > > > > > > Desc: PortNumber=02 ComponentID=01 EltType=Config > > > > > > > > Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ > > > > > > > > Addr: 00000000fed19000 > > > > > > > > Kernel driver in use: pcieport > > > > > > > > > > > > > > Hi. > > > > > > > > > > > > > > Here's a quirk patch to disable bwctrl on this Root Port, assuming I > > > > > > > guessed the PCI device ID for it right, please check it matches to 00:01.0 > > > > > > > (I should have asked lspci with -n to see the raw number but you can > > > > > > > easily correct it yourself too before compiling the kernel). > > > > > > > > > > > > > > From 1e13651f8789fb9df060269a7b7c396211d910f8 Mon Sep 17 00:00:00 2001 > > > > > > > From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com> > > > > > > > Date: Thu, 18 Dec 2025 15:45:25 +0200 > > > > > > > Subject: [PATCH 1/1] PCI/bwctrl: Disable BW controller on Intel P45 using a quirk > > > > > > > MIME-Version: 1.0 > > > > > > > Content-Type: text/plain; charset=UTF-8 > > > > > > > Content-Transfer-Encoding: 8bit > > > > > > > > > > > > > > The commit 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as > > > > > > > PCIe BW controller") was found to lead to a boot hang on a Intel P45 > > > > > > > system. Testing without setting Link Bandwidth Management Interrupt > > > > > > > Enable (LBMIE) and Link Autonomous Bandwidth Interrupt Enable (LABIE) > > > > > > > (PCIe r7.0, sec. 7.5.3.7) in bwctrl allowed system to come up. > > > > > > > > > > > > > > Add no_bw_notif into the struct pci_dev and quirk Intel P45 Root Port > > > > > > > with it. > > > > > > > > > > > > > > Reported-by: Adam Stylinski <kungfujesus06@gmail.com> > > > > > > > Link: https://lore.kernel.org/linux-pci/aUCt1tHhm_-XIVvi@eggsbenedict/ > > > > > > > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> > > > > > > > --- > > > > > > > drivers/pci/pcie/bwctrl.c | 3 +++ > > > > > > > drivers/pci/quirks.c | 10 ++++++++++ > > > > > > > include/linux/pci.h | 1 + > > > > > > > 3 files changed, 14 insertions(+) > > > > > > > > > > > > > > diff --git a/drivers/pci/pcie/bwctrl.c b/drivers/pci/pcie/bwctrl.c > > > > > > > index 36f939f23d34..4ae92c9f912a 100644 > > > > > > > --- a/drivers/pci/pcie/bwctrl.c > > > > > > > +++ b/drivers/pci/pcie/bwctrl.c > > > > > > > @@ -250,6 +250,9 @@ static int pcie_bwnotif_probe(struct pcie_device *srv) > > > > > > > struct pci_dev *port = srv->port; > > > > > > > int ret; > > > > > > > > > > > > > > + if (port->no_bw_notif) > > > > > > > + return -ENODEV; > > > > > > > + > > > > > > > /* Can happen if we run out of bus numbers during enumeration. */ > > > > > > > if (!port->subordinate) > > > > > > > return -ENODEV; > > > > > > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > > > > > > > index b9c252aa6fe0..6ef42a2c4831 100644 > > > > > > > --- a/drivers/pci/quirks.c > > > > > > > +++ b/drivers/pci/quirks.c > > > > > > > @@ -1359,6 +1359,16 @@ static void quirk_transparent_bridge(struct pci_dev *dev) > > > > > > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); > > > > > > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); > > > > > > > > > > > > > > +/* > > > > > > > + * Enabling Link Bandwidth Management Interrupts (BW notifications) can cause > > > > > > > + * boot hangs on P45. > > > > > > > + */ > > > > > > > +static void quirk_p45_bw_notifications(struct pci_dev *dev) > > > > > > > +{ > > > > > > > + dev->no_bw_notif = 1; > > > > > > > +} > > > > > > > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e21, quirk_p45_bw_notifications); > > > > > > > + > > > > > > > /* > > > > > > > * Common misconfiguration of the MediaGX/Geode PCI master that will reduce > > > > > > > * PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 datasheets > > > > > > > diff --git a/include/linux/pci.h b/include/linux/pci.h > > > > > > > index 864775651c6f..3a556cd749e3 100644 > > > > > > > --- a/include/linux/pci.h > > > > > > > +++ b/include/linux/pci.h > > > > > > > @@ -406,6 +406,7 @@ struct pci_dev { > > > > > > > user sysfs */ > > > > > > > unsigned int clear_retrain_link:1; /* Need to clear Retrain Link > > > > > > > bit manually */ > > > > > > > + unsigned int no_bw_notif:1; /* BW notifications may cause issues */ > > > > > > > unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */ > > > > > > > unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ > > > > > > > > > > > > > > > > > > > > > base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8 > > > > > > > -- > > > > > > > 2.39.5 > > > > > > > > > > > > You are correct on the ID, however I'm having some issues applying that > > > > > > patch. The pcie_bwnotif_probe functions do no return in 6.18, 6.13, or > > > > > > even on master. > > > > > > > > > > I didn't get what you meant with that "no return" description. > > > > > > > > > > > Am I missing a patch or maybe you did that on top of a > > > > > > WIP branch? > > > > > > > > > > The patch is made on top of 6.19-rc1. I don't see what would prevent > > > > > applying it to 6.18 (in fact, I just tried and it applied cleanly on top > > > > > of 6.18.2). Maybe it got corrupted somehow while you were saving the patch > > > > > from email. > > > > > > > > > > I've attached a "backport" made on top of 6.18.2, it shouldn't get as > > > > > easily corrupted while saving. > > > > > > > > > > -- > > > > > i. > > > > > > > > > From 17d1513a976d94d55dbeb497ac679db9182f7cb4 Mon Sep 17 00:00:00 2001 > > > > > From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com> > > > > > Date: Thu, 18 Dec 2025 15:45:25 +0200 > > > > > Subject: [PATCH 1/1] PCI/bwctrl: Disable BW controller on Intel P45 using a > > > > > quirk > > > > > MIME-Version: 1.0 > > > > > Content-Type: text/plain; charset=UTF-8 > > > > > Content-Transfer-Encoding: 8bit > > > > > > > > > > The commit 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as > > > > > PCIe BW controller") was found to lead to a boot hang on a Intel P45 > > > > > system. Testing without setting Link Bandwidth Management Interrupt > > > > > Enable (LBMIE) and Link Autonomous Bandwidth Interrupt Enable (LABIE) > > > > > (PCIe r7.0, sec. 7.5.3.7) in bwctrl allowed system to come up. > > > > > > > > > > Add no_bw_notif into the struct pci_dev and quirk Intel P45 Root Port > > > > > with it. > > > > > > > > > > Reported-by: Adam Stylinski <kungfujesus06@gmail.com> > > > > > Link: https://lore.kernel.org/linux-pci/aUCt1tHhm_-XIVvi@eggsbenedict/ > > > > > Signed-off-by: Ilpo J??rvinen <ilpo.jarvinen@linux.intel.com> > > > > > --- > > > > > drivers/pci/pcie/bwctrl.c | 3 +++ > > > > > drivers/pci/quirks.c | 10 ++++++++++ > > > > > include/linux/pci.h | 1 + > > > > > 3 files changed, 14 insertions(+) > > > > > > > > > > diff --git a/drivers/pci/pcie/bwctrl.c b/drivers/pci/pcie/bwctrl.c > > > > > index 36f939f23d34..4ae92c9f912a 100644 > > > > > --- a/drivers/pci/pcie/bwctrl.c > > > > > +++ b/drivers/pci/pcie/bwctrl.c > > > > > @@ -250,6 +250,9 @@ static int pcie_bwnotif_probe(struct pcie_device *srv) > > > > > struct pci_dev *port = srv->port; > > > > > int ret; > > > > > > > > > > + if (port->no_bw_notif) > > > > > + return -ENODEV; > > > > > + > > > > > /* Can happen if we run out of bus numbers during enumeration. */ > > > > > if (!port->subordinate) > > > > > return -ENODEV; > > > > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > > > > > index b9c252aa6fe0..6ef42a2c4831 100644 > > > > > --- a/drivers/pci/quirks.c > > > > > +++ b/drivers/pci/quirks.c > > > > > @@ -1359,6 +1359,16 @@ static void quirk_transparent_bridge(struct pci_dev *dev) > > > > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); > > > > > DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); > > > > > > > > > > +/* > > > > > + * Enabling Link Bandwidth Management Interrupts (BW notifications) can cause > > > > > + * boot hangs on P45. > > > > > + */ > > > > > +static void quirk_p45_bw_notifications(struct pci_dev *dev) > > > > > +{ > > > > > + dev->no_bw_notif = 1; > > > > > +} > > > > > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2e21, quirk_p45_bw_notifications); > > > > > + > > > > > /* > > > > > * Common misconfiguration of the MediaGX/Geode PCI master that will reduce > > > > > * PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 datasheets > > > > > diff --git a/include/linux/pci.h b/include/linux/pci.h > > > > > index bf97d49c23cf..05aeee8c8844 100644 > > > > > --- a/include/linux/pci.h > > > > > +++ b/include/linux/pci.h > > > > > @@ -406,6 +406,7 @@ struct pci_dev { > > > > > user sysfs */ > > > > > unsigned int clear_retrain_link:1; /* Need to clear Retrain Link > > > > > bit manually */ > > > > > + unsigned int no_bw_notif:1; /* BW notifications may cause issues */ > > > > > unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */ > > > > > unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ > > > > > > > > > > > > > > > base-commit: 78d82960b939df64cf7d26ca5ed34eb87f44c9e5 > > > > > -- > > > > > 2.39.5 > > > > > > > > > > > > > Yes, that patch applied cleanly. Looking back, I must have attempted to patch the wrong function by hand somehow, because that function does indeed return an integer. Sorry for the confusion - that fix definitely works. > > > > > > > > > > Is there anything else you'd like me to test with this? I realize this > > > is low priority and probably fell off your radar but it'd be nice to not > > > have to remember to manually patch this each kernel bump. just let me > > > know. > > > > Hi, > > > > Thanks for testing. > > > > Do you want to give your Tested-by tag for this? If yes, please post that > > into that public thread. I'll then include it into the real submission of > > the patch for inclusion (please note that if you give a tag, it will > > become a public record in the kernel's git history). > > > > -- > > i. > > Sure thing. > Tested-by: Adam Stylinski <kungfujesus06@gmail.com> CC'ing list ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2026-01-14 23:40 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-12-16 0:54 Kernel regression in 6.13 Adam Stylinski
2025-12-16 9:49 ` Ilpo Järvinen
2025-12-16 13:57 ` Adam Stylinski
2025-12-16 14:14 ` Ilpo Järvinen
2025-12-16 14:23 ` Adam Stylinski
2025-12-18 13:54 ` Ilpo Järvinen
[not found] ` <aURK74sGvdTGBMdb@eggsbenedict>
[not found] ` <3fd99997-a639-d971-e43e-bcc973aa6d04@linux.intel.com>
[not found] ` <aUWG4H3GH-k2ebpa@eggsbenedict>
[not found] ` <aVyBBOXXDEN8dses@thinkpad>
[not found] ` <2c078897-3a1e-a016-1d93-237cfb71fb94@linux.intel.com>
[not found] ` <aWgnZLSenkOiXiuM@thinkpad>
2026-01-14 23:40 ` Adam Stylinski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox