Re: [PATCH V4 2/4] PCI: Move loongson pci quirks to quirks.c

[Jiaxun Yang <jiaxun.yang@flygoat.com>]

在 2021/6/28 下午6:10, Huacai Chen 写道:
> Loongson PCH (LS7A chipset) will be used by both MIPS-based and
> LoongArch-based Loongson processors. MIPS-based Loongson uses FDT
> but LoongArch-base Loongson uses ACPI, but the driver in drivers/
> pci/controller/pci-loongson.c is FDT-only. So move the quirks to
> quirks.c where can be shared by all architectures.
>
> LoongArch is a new RISC ISA, mainline support will come soon, and
> documentations are here (in translation):
>
> https://github.com/loongson/LoongArch-Documentation

Probably you should guard it with CONFIG_MACH_LOONGSON64 now and add 
CONFIG_LOONGARCH
once LOONGARCH code is mainlined.

Thanks.

- Jiaxun

>
> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
> ---
>   drivers/pci/controller/pci-loongson.c | 69 ---------------------------
>   drivers/pci/quirks.c                  | 69 +++++++++++++++++++++++++++
>   2 files changed, 69 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
> index 48169b1e3817..88066e9db69e 100644
> --- a/drivers/pci/controller/pci-loongson.c
> +++ b/drivers/pci/controller/pci-loongson.c
> @@ -12,15 +12,6 @@
>   
>   #include "../pci.h"
>   
> -/* Device IDs */
> -#define DEV_PCIE_PORT_0	0x7a09
> -#define DEV_PCIE_PORT_1	0x7a19
> -#define DEV_PCIE_PORT_2	0x7a29
> -
> -#define DEV_LS2K_APB	0x7a02
> -#define DEV_LS7A_CONF	0x7a10
> -#define DEV_LS7A_LPC	0x7a0c
> -
>   #define FLAG_CFG0	BIT(0)
>   #define FLAG_CFG1	BIT(1)
>   #define FLAG_DEV_FIX	BIT(2)
> @@ -32,66 +23,6 @@ struct loongson_pci {
>   	u32 flags;
>   };
>   
> -/* Fixup wrong class code in PCIe bridges */
> -static void bridge_class_quirk(struct pci_dev *dev)
> -{
> -	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> -}
> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> -			DEV_PCIE_PORT_0, bridge_class_quirk);
> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> -			DEV_PCIE_PORT_1, bridge_class_quirk);
> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> -			DEV_PCIE_PORT_2, bridge_class_quirk);
> -
> -static void system_bus_quirk(struct pci_dev *pdev)
> -{
> -	/*
> -	 * The address space consumed by these devices is outside the
> -	 * resources of the host bridge.
> -	 */
> -	pdev->mmio_always_on = 1;
> -	pdev->non_compliant_bars = 1;
> -}
> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> -			DEV_LS2K_APB, system_bus_quirk);
> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> -			DEV_LS7A_CONF, system_bus_quirk);
> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> -			DEV_LS7A_LPC, system_bus_quirk);
> -
> -static void loongson_mrrs_quirk(struct pci_dev *dev)
> -{
> -	struct pci_bus *bus = dev->bus;
> -	struct pci_dev *bridge;
> -	static const struct pci_device_id bridge_devids[] = {
> -		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
> -		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
> -		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
> -		{ 0, },
> -	};
> -
> -	/* look for the matching bridge */
> -	while (!pci_is_root_bus(bus)) {
> -		bridge = bus->self;
> -		bus = bus->parent;
> -		/*
> -		 * Some Loongson PCIe ports have a h/w limitation of
> -		 * 256 bytes maximum read request size. They can't handle
> -		 * anything larger than this. So force this limit on
> -		 * any devices attached under these ports.
> -		 */
> -		if (pci_match_id(bridge_devids, bridge)) {
> -			if (pcie_get_readrq(dev) > 256) {
> -				pci_info(dev, "limiting MRRS to 256\n");
> -				pcie_set_readrq(dev, 256);
> -			}
> -			break;
> -		}
> -	}
> -}
> -DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
> -
>   static void __iomem *cfg1_map(struct loongson_pci *priv, int bus,
>   				unsigned int devfn, int where)
>   {
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 22b2bb1109c9..dee4798a49fc 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -205,6 +205,75 @@ static void quirk_mmio_always_on(struct pci_dev *dev)
>   DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
>   				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
>   
> +/* Loongson-related quirks */
> +#define DEV_PCIE_PORT_0	0x7a09
> +#define DEV_PCIE_PORT_1	0x7a19
> +#define DEV_PCIE_PORT_2	0x7a29
> +
> +#define DEV_LS2K_APB	0x7a02
> +#define DEV_LS7A_CONF	0x7a10
> +#define DEV_LS7A_LPC	0x7a0c
> +
> +/* Fixup wrong class code in PCIe bridges */
> +static void loongson_bridge_class_quirk(struct pci_dev *dev)
> +{
> +	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> +			DEV_PCIE_PORT_0, loongson_bridge_class_quirk);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> +			DEV_PCIE_PORT_1, loongson_bridge_class_quirk);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> +			DEV_PCIE_PORT_2, loongson_bridge_class_quirk);
> +
> +static void loongson_system_bus_quirk(struct pci_dev *pdev)
> +{
> +	/*
> +	 * The address space consumed by these devices is outside the
> +	 * resources of the host bridge.
> +	 */
> +	pdev->mmio_always_on = 1;
> +	pdev->non_compliant_bars = 1;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> +			DEV_LS2K_APB, loongson_system_bus_quirk);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> +			DEV_LS7A_CONF, loongson_system_bus_quirk);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
> +			DEV_LS7A_LPC, loongson_system_bus_quirk);
> +
> +static void loongson_mrrs_quirk(struct pci_dev *dev)
> +{
> +	struct pci_bus *bus = dev->bus;
> +	struct pci_dev *bridge;
> +	static const struct pci_device_id bridge_devids[] = {
> +		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
> +		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
> +		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
> +		{ 0, },
> +	};
> +
> +	/* look for the matching bridge */
> +	while (!pci_is_root_bus(bus)) {
> +		bridge = bus->self;
> +		bus = bus->parent;
> +		/*
> +		 * Some Loongson PCIe ports have a h/w limitation of
> +		 * 256 bytes maximum read request size. They can't handle
> +		 * anything larger than this. So force this limit on
> +		 * any devices attached under these ports.
> +		 */
> +		if (pci_match_id(bridge_devids, bridge)) {
> +			if (pcie_get_readrq(dev) > 256) {
> +				pci_info(dev, "limiting MRRS to 256\n");
> +				pcie_set_readrq(dev, 256);
> +			}
> +			break;
> +		}
> +	}
> +}
> +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
> +
>   /*
>    * The Mellanox Tavor device gives false positive parity errors.  Disable
>    * parity error reporting.