[PATCH v2] misc: rtsx: Add short delay after exit from ASPM

[Klaus Doth <kdlnx@doth.eu>]

From: Klaus Doth <kdlnx@doth.eu>

DMA transfers to and from the SD card stall for 10 seconds and run into
timeout on RTS5260 card readers after ASPM was enabled.

Adding a short msleep after disabling ASPM fixes the issue on several
Dell Precision 7530/7540 systems I tested.

This function is only called when waking up after the chip went into
power-save after not transferring data for a few seconds. The added
msleep does therefore not change anything in data transfer speed or
induce any excessive waiting while data transfers are running, or the
chip is sleeping. Only the transition from sleep to active is affected.

Signed-off-by: Klaus Doth <kdlnx@doth.eu>
---
 drivers/misc/cardreader/rtsx_pcr.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/misc/cardreader/rtsx_pcr.c
b/drivers/misc/cardreader/rtsx_pcr.c
index 06038b325b02..3a6a6988cf80 100644
--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -141,6 +141,9 @@ static void rtsx_comm_pm_full_on(struct rtsx_pcr *pcr)
     struct rtsx_cr_option *option = &pcr->option;
 
     rtsx_disable_aspm(pcr);
+   
+    /* Fixes DMA transfer timeout issue after disabling ASPM on RTS5260 */
+    msleep(1);
 
     if (option->ltr_enabled)
         rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
-- 
2.26.2