From: sashiko-bot@kernel.org
To: "Shameer Kolothum" <skolothumtho@nvidia.com>,
kvm@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [RFC PATCH v3 11/20] vfio/pci: Use access ops for hardware information queries
Date: Thu, 12 Nov 2026 14:47:03 +0000 [thread overview]
Message-ID: <sashiko-outbox-211378@kernel.org> (raw)
In-Reply-To: <20261112141632.918954-12-skolothumtho@nvidia.com>
Thank you for your contribution! Sashiko AI review found 2 potential
issues to consider:
- [High] vfio/pci: VFIO_DEVICE_GET_INFO fails with -EIO on VF when PF is
closed
- [Medium] vfio/pci: lockdep circular locking dependency in
vfio_pci_access_atomic_cap()
--
commit 8a20ca42b1e7365162ac6cecdd060d990d426a4f
Author: Shameer Kolothum <skolothumtho@nvidia.com>
vfio/pci: Use access ops for hardware information queries
This commit routes AtomicOps and ROM region hardware information queries
through VFIO PCI access ops so they participate in device error recovery.
> diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
> index fc6b2673be88c..da7166669dc75 100644
> --- a/drivers/vfio/pci/vfio_pci_core.c
> +++ b/drivers/vfio/pci/vfio_pci_core.c
> @@ -1178,6 +1178,33 @@ static int vfio_pci_info_atomic_cap(struct vfio_pci_core_device *vdev,
> return vfio_info_add_capability(caps, &cap.header, sizeof(cap));
> }
>
> +static long vfio_pci_access_atomic_cap_target(struct vfio_pci_core_device *vdev,
> + void *data)
> +{
> + return vfio_pci_info_atomic_cap(vdev, data);
> +}
> +
> +static long vfio_pci_access_atomic_cap(struct vfio_pci_core_device *vdev,
> + void *data)
> +{
> + struct vfio_pci_core_device *pf_vdev = vdev->sriov_pf_core_dev;
> +
> + if (!pf_vdev || !pf_vdev->pci_recovery_supported)
> + return vfio_pci_info_atomic_cap(vdev, data);
> +
> + /*
> + * VF AtomicOps queries read the PF's configuration. The PF association
> + * lasts until VF removal, but its SRCU instance exists only while
> + * the PF is open.
> + */
> + guard(mutex)(&pf_vdev->access_lock);
[Severity: Medium]
Can locking pf_vdev->access_lock here trigger a lockdep circular locking
warning?
vfio_pci_ioctl_get_info() calls vfio_pci_core_access() on the VF, which
takes srcu_read_lock(&vdev->access_srcu) before entering
vfio_pci_access_atomic_cap() and acquiring pf_vdev->access_lock. Because
every struct vfio_pci_core_device initializes access_lock and access_srcu
at the same mutex_init() and init_srcu_struct() call sites, the VF and PF
share lockdep classes.
Meanwhile, vfio_pci_core_close_device() holds vdev->access_lock while
vfio_pci_core_block_access() calls synchronize_srcu(&vdev->access_srcu),
establishing the opposite access_lock -> access_srcu class order:
CPU0 CPU1
---- ----
lock(&vdev->access_lock)
srcu_read_lock(&vdev->access_srcu)
lock(&pf_vdev->access_lock)
synchronize_srcu(&vdev->access_srcu)
*** DEADLOCK ***
CPU0: vfio_pci_core_close_device() -> vfio_pci_core_block_access()
CPU1: vfio_pci_ioctl_get_info() -> vfio_pci_core_access() ->
vfio_pci_access_atomic_cap()
> + if (!pf_vdev->device_open)
> + return -EIO;
> +
> + return vfio_pci_core_access(pf_vdev, vfio_pci_access_atomic_cap_target,
> + data);
> +}
> +
> static int vfio_pci_ioctl_get_info(struct vfio_pci_core_device *vdev,
> struct vfio_device_info __user *arg)
> {
> @@ -1209,10 +1236,12 @@ static int vfio_pci_ioctl_get_info(struct vfio_pci_core_device *vdev,
> return ret;
> }
>
> - ret = vfio_pci_info_atomic_cap(vdev, &caps);
> + ret = vfio_pci_core_access(vdev, vfio_pci_access_atomic_cap, &caps);
> if (ret && ret != -ENODEV) {
> - pci_warn(vdev->pdev,
> - "Failed to setup AtomicOps info capability\n");
> + if (ret != -EIO)
> + pci_warn(vdev->pdev,
> + "Failed to setup AtomicOps info capability\n");
> + kfree(caps.buf);
> return ret;
> }
[Severity: High]
Does this cause VFIO_DEVICE_GET_INFO on a VF to fail with -EIO whenever its
recovery-capable vfio-pci PF is not currently open in userspace?
A PF bound to vfio-pci does not need to stay open while its VFs are in use;
for example, userspace can open the PF only long enough to configure
vf_token and then close the PF fd before opening VFs, while
vfio_pci_core_sriov_configure() keeps the PF in PCI_D0. When
pf_vdev->device_open is false, vfio_pci_access_atomic_cap() returns -EIO
and vfio_pci_ioctl_get_info() aborts the entire ioctl, breaking
VFIO_DEVICE_GET_INFO on healthy VFs even if AtomicOps are not supported.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261112141632.918954-1-skolothumtho@nvidia.com?part=11
next prev parent reply other threads:[~2026-11-12 14:47 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-12 14:16 [RFC PATCH v3 00/20] vfio/pci: Handle PCI error recovery and report state to userspace Shameer Kolothum
2026-11-12 14:16 ` [RFC PATCH v3 01/20] vfio/pci: Add SRCU-protected access ops Shameer Kolothum
2026-11-12 14:29 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 02/20] PCI/PM: Add a power-state helper that tries the bus lock Shameer Kolothum
2026-11-12 14:30 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 03/20] vfio/pci: Avoid waiting for the bus lock when preparing D0 Shameer Kolothum
2026-11-12 14:33 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 04/20] vfio/pci: Use access ops for config-space accesses Shameer Kolothum
2026-11-12 14:41 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 05/20] vfio/pci: Buffer ROM reads before copying to userspace Shameer Kolothum
2026-11-12 14:40 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 06/20] vfio/pci: Use access ops for BAR and ROM accesses Shameer Kolothum
2026-11-12 14:34 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 07/20] vfio/pci: Use access ops when mapping BAR pages Shameer Kolothum
2026-11-12 14:28 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 08/20] vfio/pci: Use access ops for hardware IRQ operations Shameer Kolothum
2026-11-12 14:30 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 09/20] vfio/pci: Use access ops for function reset Shameer Kolothum
2026-11-12 14:32 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 10/20] vfio/pci: Use access ops for runtime-PM requests Shameer Kolothum
2026-11-12 14:33 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 11/20] vfio/pci: Use access ops for hardware information queries Shameer Kolothum
2026-11-12 14:47 ` sashiko-bot [this message]
2026-11-12 14:16 ` [RFC PATCH v3 12/20] vfio/pci: Use access ops for DMA-BUF export and restoration Shameer Kolothum
2026-11-12 14:29 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 13/20] vfio/pci: Track PCI recovery state Shameer Kolothum
2026-11-12 14:35 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 14/20] vfio/pci: Add INTx recovery operations Shameer Kolothum
2026-11-12 14:52 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 15/20] vfio/pci: Use access ops for SR-IOV configuration and shared reset Shameer Kolothum
2026-11-12 14:49 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 16/20] vfio/pci: Restore device state from slot_reset() Shameer Kolothum
2026-11-12 14:50 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 17/20] vfio/pci: Complete recovery in resume() Shameer Kolothum
2026-11-12 14:45 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 18/20] vfio/pci: Block device access during host recovery Shameer Kolothum
2026-11-12 15:06 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 19/20] vfio/pci: Add VFIO_DEVICE_FEATURE_PCI_ERROR_RECOVERY Shameer Kolothum
2026-11-12 14:43 ` sashiko-bot
2026-11-12 14:16 ` [RFC PATCH v3 20/20] vfio/pci: Enable recovery for supported native PCIe endpoints Shameer Kolothum
2026-11-12 15:10 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-211378@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=skolothumtho@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox