[PATCH v1 1/6] perf vendor events intel: Update arrowlake events from 1.17 to 1.19

[Chun-Tse Shao <ctshao@google.com>]

The updated events were published in:
https://github.com/intel/perfmon/commit/b84e75626ae78558b8f526a276e4597c5ca6c429

Signed-off-by: Chun-Tse Shao <ctshao@google.com>
---
 .../pmu-events/arch/x86/arrowlake/cache.json  |  30 +++-
 .../arch/x86/arrowlake/floating-point.json    |  45 ++++++
 .../pmu-events/arch/x86/arrowlake/memory.json |  18 +++
 .../arch/x86/arrowlake/pipeline.json          | 129 +++++++++++++++++-
 tools/perf/pmu-events/arch/x86/mapfile.csv    |   2 +-
 5 files changed, 217 insertions(+), 7 deletions(-)

diff --git a/tools/perf/pmu-events/arch/x86/arrowlake/cache.json b/tools/perf/pmu-events/arch/x86/arrowlake/cache.json
index fe6b9ad68f87..142f62c59531 100644
--- a/tools/perf/pmu-events/arch/x86/arrowlake/cache.json
+++ b/tools/perf/pmu-events/arch/x86/arrowlake/cache.json
@@ -1,6 +1,6 @@
 [
     {
-        "BriefDescription": "Counts the number of request that were not accepted into the L2Q because the L2Q is FULL.",
+        "BriefDescription": "Counts the number of requests that were not accepted into the L2Q because the L2Q is FULL.",
         "Counter": "0,1,2,3,4,5,6,7",
         "EventCode": "0x31",
         "EventName": "CORE_REJECT_L2Q.ANY",
@@ -8,6 +8,15 @@
         "SampleAfterValue": "1000003",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of requests that were not accepted into the L2Q because the L2Q is FULL.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x31",
+        "EventName": "CORE_REJECT_L2Q.ANY",
+        "PublicDescription": "Counts the number of (demand and L1 prefetchers) core requests rejected by the L2Q due to a full or nearly full w condition which likely indicates back pressure from L2Q.  It also counts requests that would have gone directly to the XQ, but are rejected due to a full or nearly full condition, indicating back pressure from the IDI link.  The L2Q may also reject transactions  from a core to insure fairness between cores, or to delay a cores dirty eviction when the address conflicts incoming external snoops.  (Note that L2 prefetcher requests that are dropped are not counted by this event.) Counts on a per core basis.",
+        "SampleAfterValue": "200003",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of L1D cacheline (dirty) evictions caused by load misses, stores, and prefetches.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -310,6 +319,15 @@
         "SampleAfterValue": "1000003",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of demand and prefetch transactions that the External Queue (XQ) rejects due to a full or near full condition.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x30",
+        "EventName": "L2_REJECT_XQ.ANY",
+        "PublicDescription": "Counts the number of demand and prefetch transactions that the External Queue (XQ) rejects due to a full or near full condition which likely indicates back pressure from the IDI link.  The XQ may reject transactions from the L2Q (non-cacheable requests), BBL (L2 misses) and WOB (L2 write-back victims).",
+        "SampleAfterValue": "200003",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of L2 Cache Accesses Counts the total number of L2 Cache Accesses - sum of hits, misses, rejects  front door requests for CRd/DRd/RFO/ItoM/L2 Prefetches only, per core event",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1382,6 +1400,16 @@
         "UMask": "0x83",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of memory uops retired.  A single uop that performs both a load AND a store will be counted as 1, not 2 (e.g. ADD [mem], CONST)",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_UOPS_RETIRED.ALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x83",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of load uops retired.",
         "Counter": "0,1,2,3,4,5,6,7",
diff --git a/tools/perf/pmu-events/arch/x86/arrowlake/floating-point.json b/tools/perf/pmu-events/arch/x86/arrowlake/floating-point.json
index c54fc201a6ca..8dc3a11350c5 100644
--- a/tools/perf/pmu-events/arch/x86/arrowlake/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/arrowlake/floating-point.json
@@ -510,6 +510,15 @@
         "UMask": "0x1f",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on all floating point ports.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb2",
+        "EventName": "FP_VINT_UOPS_EXECUTED.ALL",
+        "SampleAfterValue": "1000003",
+        "UMask": "0xf",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 0.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -519,6 +528,15 @@
         "UMask": "0x2",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 0.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb2",
+        "EventName": "FP_VINT_UOPS_EXECUTED.P0",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 1.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -528,6 +546,15 @@
         "UMask": "0x4",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 1.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb2",
+        "EventName": "FP_VINT_UOPS_EXECUTED.P1",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 2.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -537,6 +564,15 @@
         "UMask": "0x8",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 2.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb2",
+        "EventName": "FP_VINT_UOPS_EXECUTED.P2",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x8",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 3.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -555,6 +591,15 @@
         "UMask": "0x1e",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on floating point and vector integer port 0, 1, 2.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb2",
+        "EventName": "FP_VINT_UOPS_EXECUTED.PRIMARY",
+        "SampleAfterValue": "1000003",
+        "UMask": "0xe",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on floating point and vector integer store data port.",
         "Counter": "0,1,2,3,4,5,6,7",
diff --git a/tools/perf/pmu-events/arch/x86/arrowlake/memory.json b/tools/perf/pmu-events/arch/x86/arrowlake/memory.json
index 05cc46518232..44922186c2b0 100644
--- a/tools/perf/pmu-events/arch/x86/arrowlake/memory.json
+++ b/tools/perf/pmu-events/arch/x86/arrowlake/memory.json
@@ -173,6 +173,15 @@
         "UMask": "0x2",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer is stalled due to request buffers full or lock in progress.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x05",
+        "EventName": "LD_HEAD.WCB_FULL",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer and retirement are both stalled due to request buffers full or lock in progress.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -182,6 +191,15 @@
         "UMask": "0x82",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of cycles that the head (oldest load) of the load buffer and retirement are both stalled due to request buffers full or lock in progress.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x05",
+        "EventName": "LD_HEAD.WCB_FULL_AT_RET",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x82",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of memory ordering machine clears triggered due to a snoop from an external agent. Does not count internally generated machine clears such as those due to disambiguations.",
         "Counter": "0,1,2,3,4,5,6,7",
diff --git a/tools/perf/pmu-events/arch/x86/arrowlake/pipeline.json b/tools/perf/pmu-events/arch/x86/arrowlake/pipeline.json
index a0fd63cace22..bdfee0347cc5 100644
--- a/tools/perf/pmu-events/arch/x86/arrowlake/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/arrowlake/pipeline.json
@@ -209,7 +209,6 @@
         "EventName": "BR_INST_RETIRED.COND_TAKEN_FWD",
         "PublicDescription": "Counts taken forward conditional branch instructions retired. Available PDIST counters: 0,1",
         "SampleAfterValue": "400009",
-        "UMask": "0x102",
         "Unit": "cpu_core"
     },
     {
@@ -608,7 +607,7 @@
         "EventName": "BR_MISP_RETIRED.COND_TAKEN_BWD_COST",
         "PublicDescription": "number of branch instructions retired that were mispredicted and taken backward. This precise event may be used to get the misprediction cost via the Retire_Latency field of PEBS. It fires on the instruction that immediately follows the mispredicted branch. Available PDIST counters: 0,1",
         "SampleAfterValue": "400009",
-        "UMask": "0x8001",
+        "UMask": "0x41",
         "Unit": "cpu_core"
     },
     {
@@ -637,7 +636,7 @@
         "EventName": "BR_MISP_RETIRED.COND_TAKEN_FWD_COST",
         "PublicDescription": "number of branch instructions retired that were mispredicted and taken forward. This precise event may be used to get the misprediction cost via the Retire_Latency field of PEBS. It fires on the instruction that immediately follows the mispredicted branch. Available PDIST counters: 0,1",
         "SampleAfterValue": "400009",
-        "UMask": "0x8002",
+        "UMask": "0x140",
         "Unit": "cpu_core"
     },
     {
@@ -773,11 +772,11 @@
         "Unit": "cpu_core"
     },
     {
-        "BriefDescription": "This event counts the number of mispredicted ret instructions retired. Non PEBS",
+        "BriefDescription": "This event counts the number of mispredicted ret instructions retired.",
         "Counter": "0,1,2,3,4,5,6,7,8,9",
         "EventCode": "0xc5",
         "EventName": "BR_MISP_RETIRED.RET",
-        "PublicDescription": "This is a non-precise version (that is, does not use PEBS) of the event that counts mispredicted return instructions retired. Available PDIST counters: 0,1",
+        "PublicDescription": "This event counts the number of mispredicted ret instructions retired. Available PDIST counters: 0,1",
         "SampleAfterValue": "100007",
         "UMask": "0x8",
         "Unit": "cpu_core"
@@ -1326,6 +1325,15 @@
         "UMask": "0xff",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on all Integer ports.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.ALL",
+        "SampleAfterValue": "1000003",
+        "UMask": "0xff",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on a load port.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1336,6 +1344,16 @@
         "UMask": "0x1",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on a load port.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.LD",
+        "PublicDescription": "Counts the number of uops executed on a load port.  This event counts for integer uops even if the destination is FP/vector",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on integer port 0.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1345,6 +1363,15 @@
         "UMask": "0x8",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on integer port 0.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.P0",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x8",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on integer port 1.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1354,6 +1381,15 @@
         "UMask": "0x10",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on integer port 1.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.P1",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x10",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on integer port 2.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1363,6 +1399,15 @@
         "UMask": "0x20",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on integer port 2.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.P2",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x20",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on integer port 3.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1372,6 +1417,15 @@
         "UMask": "0x40",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on integer port 3.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.P3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x40",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on integer port  0,1, 2, 3.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1381,6 +1435,15 @@
         "UMask": "0x78",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on integer port  0,1, 2, 3.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.PRIMARY",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x78",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on a Store address port.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1391,6 +1454,16 @@
         "UMask": "0x2",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on a Store address port.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.STA",
+        "PublicDescription": "Counts the number of uops executed on a Store address port. This event counts integer uops even if the data source is FP/vector",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of uops executed on an integer store data and jump port.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1400,6 +1473,15 @@
         "UMask": "0x4",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of uops executed on an integer store data and jump port.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb3",
+        "EventName": "INT_UOPS_EXECUTED.STD_JMP",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Number of vector integer instructions retired of 128-bit vector-width.",
         "Counter": "0,1,2,3,4,5,6,7,8,9",
@@ -1691,6 +1773,15 @@
         "UMask": "0x88",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of machine clears that flush the pipeline and restart the machine without the use of microcode.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc3",
+        "EventName": "MACHINE_CLEARS.FAST",
+        "SampleAfterValue": "20003",
+        "UMask": "0x10",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts number of virtual trap actually taken (e.g. highest priority event during retirement). It can count virtual trap from FPC port 0 or port 1 (x87/SSE) equally in a single counter.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -1700,6 +1791,15 @@
         "UMask": "0x40",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of virtual traps taken.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc3",
+        "EventName": "MACHINE_CLEARS.FPC_VIRTUAL_TRAP",
+        "SampleAfterValue": "20003",
+        "UMask": "0x40",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of nukes due to memory renaming",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -2015,6 +2115,15 @@
         "UMask": "0x8",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of issue slots not consumed due to a color request for an FCW or MXCSR control register when all 4 colors (copies) are already in use.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x75",
+        "EventName": "SERIALIZATION.COLOR_STALLS",
+        "SampleAfterValue": "200003",
+        "UMask": "0x8",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "Counts the number of issue slots where no uop could issue due to an IQ scoreboard that stalls allocation until a specified older uop retires or (in the case of jump scoreboard) executes. Commonly executed instructions with IQ scoreboards include LFENCE and MFENCE.",
         "Counter": "0,1,2,3,4,5,6,7",
@@ -2034,6 +2143,16 @@
         "UMask": "0x2",
         "Unit": "cpu_atom"
     },
+    {
+        "BriefDescription": "Counts the number of issue slots not consumed by the backend due to a micro-sequencer (MS) scoreboard, which stalls the front-end from issuing from the UROM until a specified older uop retires.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x75",
+        "EventName": "SERIALIZATION.NON_C01_MS_SCB",
+        "PublicDescription": "Counts the number of issue slots not consumed by the backend due to a micro-sequencer (MS) scoreboard, which stalls the front-end from issuing from the UROM until a specified older uop retires. The most commonly executed instruction with an MS scoreboard is PAUSE.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2",
+        "Unit": "cpu_lowpower"
+    },
     {
         "BriefDescription": "This event counts a subset of the Topdown Slots event that were not consumed by the back-end pipeline due to lack of back-end resources, as a result of memory subsystem delays, execution units limitations, or other conditions.",
         "Counter": "0,1,2,3,4,5,6,7,8,9",
diff --git a/tools/perf/pmu-events/arch/x86/mapfile.csv b/tools/perf/pmu-events/arch/x86/mapfile.csv
index 50a403b429b1..613881d04a9a 100644
--- a/tools/perf/pmu-events/arch/x86/mapfile.csv
+++ b/tools/perf/pmu-events/arch/x86/mapfile.csv
@@ -1,7 +1,7 @@
 Family-model,Version,Filename,EventType
 GenuineIntel-6-(97|9A|B7|BA|BF),v1.39,alderlake,core
 GenuineIntel-6-BE,v1.39,alderlaken,core
-GenuineIntel-6-C[56],v1.17,arrowlake,core
+GenuineIntel-6-C[56],v1.19,arrowlake,core
 GenuineIntel-6-(1C|26|27|35|36),v5,bonnell,core
 GenuineIntel-6-(3D|47),v30,broadwell,core
 GenuineIntel-6-56,v12,broadwellde,core
-- 
2.54.0.1099.g489fc7bff1-goog