public inbox for linux-phy@lists.infradead.org
 help / color / mirror / Atom feed
From: Vidya Sagar <vidyas@nvidia.com>
To: <lpieralisi@kernel.org>, <robh@kernel.org>, <kw@linux.com>,
	<bhelgaas@google.com>, <thierry.reding@gmail.com>,
	<jonathanh@nvidia.com>, <kishon@ti.com>, <vkoul@kernel.org>,
	<mani@kernel.org>, <Sergey.Semin@baikalelectronics.ru>,
	<ffclaire1224@gmail.com>
Cc: <linux-pci@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>,
	<kthota@nvidia.com>, <mmaddireddy@nvidia.com>,
	<vidyas@nvidia.com>, <sagar.tv@gmail.com>
Subject: [PATCH V3 00/21] Enhancements to pcie-tegra194 driver
Date: Fri, 14 Oct 2022 00:08:33 +0530	[thread overview]
Message-ID: <20221013183854.21087-1-vidyas@nvidia.com> (raw)

This patch series contains enhancements to the pcie-tegra194.c driver
that works for both Tegra194 and Tegra234 SoCs and for both RootPort
and Endpoint modes.

This patch series depends on the following series in the same order

PCI: designware-ep: Fix DBI access before core init
https://patchwork.ozlabs.org/project/linux-pci/list/?series=322681

PCI: endpoint: Rework the EPC to EPF notification
https://patchwork.kernel.org/project/linux-pci/list/?series=683493

Add DeInit support in the PCIe Endpoint framework
https://patchwork.kernel.org/project/linux-pci/list/?series=685157

V3:
* Addressed review comments from Bjorn
* Added new patches to the series

V2:
* Addressed review comments from test bot and Vinod

Vidya Sagar (21):
  PCI: tegra194: Use devm_gpiod_get_optional() to parse
    "nvidia,refclk-select"
  PCI: tegra194: Drive CLKREQ signal low explicitly
  PCI: tegra194: Fix polling delay for L2 state
  PCI: tegra194: Handle errors in BPMP response
  PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP
  PCI: tegra194: Refactor LTSSM state polling on surprise down
  PCI: tegra194: Disable direct speed change for EP
  phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration
  PCI: tegra194: Calibrate P2U for endpoint mode
  PCI: tegra194: Free resources during controller deinitialization
  PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt
    registration
  PCI: tegra194: Enable DMA interrupt
  PCI: tegra194: Enable hardware hot reset mode in Endpoint
  PCI: tegra194: Allow system suspend when the Endpoint link is not up
  PCI: tegra194: Disable L1.2 capability of Tegra234 EP
  PCI: tegra194: Set LTR message request before PCIe link up
  PCI: tegra194: Reduce AXI slave timeout value
  PCI: tegra194: Don't force the device into the D0 state before L2
  PCI: tegra194: Free up EP resources during remove()
  dt-bindings: PCI: tegra194: Add monitor clock support
  PCI: tegra194: Add core monitor clock support

 .../bindings/pci/nvidia,tegra194-pcie-ep.yaml |   6 +-
 .../bindings/pci/nvidia,tegra194-pcie.yaml    |   6 +-
 drivers/pci/controller/dwc/pcie-tegra194.c    | 261 ++++++++++++------
 drivers/phy/tegra/phy-tegra194-p2u.c          |  14 +
 4 files changed, 194 insertions(+), 93 deletions(-)

-- 
2.17.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

             reply	other threads:[~2022-10-13 18:39 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-13 18:38 Vidya Sagar [this message]
2022-10-13 18:38 ` [PATCH V3 01/21] PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select" Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 02/21] PCI: tegra194: Drive CLKREQ signal low explicitly Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 03/21] PCI: tegra194: Fix polling delay for L2 state Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 04/21] PCI: tegra194: Handle errors in BPMP response Vidya Sagar
2023-01-13 15:15   ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 05/21] PCI: tegra194: Apply pinctrl settings for both PCIe RP and EP Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 06/21] PCI: tegra194: Refactor LTSSM state polling on surprise down Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 07/21] PCI: tegra194: Disable direct speed change for EP Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 08/21] phy: tegra: p2u: Set ENABLE_L2_EXIT_RATE_CHANGE in calibration Vidya Sagar
2022-10-28 11:42   ` Vinod Koul
2022-10-28 11:49     ` Vidya Sagar
2022-10-28 12:13   ` Vinod Koul
2022-10-13 18:38 ` [PATCH V3 09/21] PCI: tegra194: Calibrate P2U for endpoint mode Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 10/21] PCI: tegra194: Free resources during controller deinitialization Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 11/21] PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration Vidya Sagar
2022-11-14 11:56   ` Lorenzo Pieralisi
2023-01-13 15:21   ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 12/21] PCI: tegra194: Enable DMA interrupt Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 13/21] PCI: tegra194: Enable hardware hot reset mode in Endpoint Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 14/21] PCI: tegra194: Allow system suspend when the Endpoint link is not up Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 15/21] PCI: tegra194: Disable L1.2 capability of Tegra234 EP Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 16/21] PCI: tegra194: Set LTR message request before PCIe link up Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 17/21] PCI: tegra194: Reduce AXI slave timeout value Vidya Sagar
2023-01-13 15:31   ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 18/21] PCI: tegra194: Don't force the device into the D0 state before L2 Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 19/21] PCI: tegra194: Free up EP resources during remove() Vidya Sagar
2023-01-13 15:28   ` Lorenzo Pieralisi
2022-10-13 18:38 ` [PATCH V3 20/21] dt-bindings: PCI: tegra194: Add monitor clock support Vidya Sagar
2022-10-13 18:38 ` [PATCH V3 21/21] PCI: tegra194: Add core " Vidya Sagar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221013183854.21087-1-vidyas@nvidia.com \
    --to=vidyas@nvidia.com \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=bhelgaas@google.com \
    --cc=ffclaire1224@gmail.com \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=kthota@nvidia.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=mmaddireddy@nvidia.com \
    --cc=robh@kernel.org \
    --cc=sagar.tv@gmail.com \
    --cc=thierry.reding@gmail.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox